EGO Chainsaw Maintenance

[@maggiesteen2049]

Thank you. Just watched two of your videos on this particular chainsaw. Now I’m ready to use it safely and effectively.

[@AroundTheHome1]

Great to hear! Is this one of the ones that you watched? kzbin.info/www/bejne/gICre3VqZ7-oeJo

[@luckyduck3985]

@@AroundTheHome1 Is there any way to adjust the bar oil flow rate?

[@mkfgaming7018]

He explains it super good step-by-step.

[@formicapple2]

I’m a totally chainsaw virgin. Just bought the 24 in m version for some garden work. Great introduction. Many thanks.

[@AroundTheHome1]

Here is a good how to use video kzbin.info/www/bejne/gICre3VqZ7-oeJo

[@buickjohnson7914]

Just used my Ego for the first time today. Great chainsaw and great video

[@AroundTheHome1]

Glad it helped! And here is our EGO playlist kzbin.info/aero/PLxwydrM6xLuXnc39AF0vaAYvLdauVFlBU

[@yphoenix9077]

Dude, thank you. My chain just fell off, and this video really helped.

[@AroundTheHome1]

You're welcome!

[@AXHEJAZ]

Excellent video thank you brother

[@AroundTheHome1]

My pleasure

[@TheParot161]

Great video! Thank you. I am having a terrible time with the chain repeatedly coming off while I’m sawing something. Just watched your video and will go out and try adjusting the tension and give it another whirl. Could be I don’t have the tension correct. You are right about the smaller version. I’ve got the small one and that thing does a great job cutting. If I can just get the chain to stay on.

[@AroundTheHome1]

Sorry to hear that, but yes if the chain is loose it will definitely slip off while cutting. Thanks for watching and here is our webpage with everything EGO. www.aroundthehome.org/ego-power-plus.html

[@zaineridling]

Excellent! I'll be buying EGO's pole saw next spring. Should be fun. 💯

[@AroundTheHome1]

I love the pole saw!

[@oxidize99]

Picked one up last weekend. Love it!

[@rjazco51]

one thing you should do is before you make your first cut ... RUN THE CHAIN SAW a few times without cutting anything , THEN CHECK THE TENSION of the chain most of the time it will be loose , tighten it if needed .

[@yogip6749]

Thanks a lot. Great video , First time chain saw user and I wasn't sure why Ego wasn't cutting efficiently; Chain had to be tightened

[@AroundTheHome1]

Glad to help. If you are new to using chain saws then this video will help also. kzbin.info/www/bejne/gICre3VqZ7-oeJo

[@alikarakullukcu5044]

Harika bir makina İşimi kolaylaştırdı. İmalatçı firmaya teşekkür ederim 👍🇹🇷

[@sirjames1977nc]

You can always buy a cheap saw file the appropriate size. And keep your saw sharp

[@kariu.]

i have a feeling this is gonna go viral for sum reason.

[@AroundTheHome1]

I am hoping so.

[@jr-kb5vf]

@@AroundTheHome1 would you buy this chainsaw again? How long does the battery last?

[@AroundTheHome1]

@jr I would buy it again. I do have a large Husqvarna gas chainsaw as well that I'm not getting rid of in case we get another crazy ice storm and loose power for over a week. That aside, the electric is best for the normal homeowner because it is ready to go at a moments notice. Don't have to worry if it will start because it sat on the shelf for too long. And it has the power to do just about everything that you want it to. You can see it in action in this video of mine. kzbin.info/www/bejne/e4DNkHuFnsp2qdU

[@justinmckenzie7328]

Thank you. About to use my EGO chainsaw for the first time.

[@AroundTheHome1]

Good luck! Here is an in-depth video on how to use the saw. kzbin.info/www/bejne/gICre3VqZ7-oeJo

[@MrAwsomeshot]

so the first few times I used my ego saw I topped up the bar oil and it ran fine, appeared to oil fine. but I didnt use it for a month or so and I went to move it of the shelf I had set it on and god damn it leaked out whatever oil was still in it from last time I used it. Some people saying this is normal. The manual does say to drain out the oil after each use but that is a pain in the ass.

[@JM7284]

Thanks! I have a couple gas chainsaws but I never use them because they are a pain. Really they haven't been used in so long I will probably have to sell them to a shop to refurbish and then sell (they are top of the line saws that I bought and only used once - I know...I suck). I just want something super quick and easy to use. I have been on the fence with the EGO since I have a bunch of their other power tools but I was unsure about the maintenance requirements. Thanks for this video. I will probably pick up a 16" soon.

[@377499]

Wondering about sawdust accumulation inside the motor compartment. Does anyone actually take off all 20 screws to get inside and swab it out?

[@mellykick213]

Hey thanks for the video, I have the same saw works great. Do you have a video showing how to sharpen the chain? I hit dirt a few times bucking a tree and need to learn how to sharpen. Thanks

[@AroundTheHome1]

I do, but it's a little old. It should still do you a good job. kzbin.info/www/bejne/hXvYY3iJfcSdgdk

[@mellykick213]

@@AroundTheHome1 thanks

[@Morgan2XL]

Add clean bar chain guide and bar oiler port at each chain sharpening - 2 to 3 times per 8 hours operation use Stihl depth gauge filer tool or a small flat head screw driver. Air Blow clean out at end of 8 hours.

[@luckyduck3985]

Is there any way to adjust the bar oil flow rate?

[@augustdecaro5555]

Thanks! Perfect

[@AroundTheHome1]

You're welcome! 👍

[@rainbowsnbubbles]

I just want to know the diameter of file I need to properly sharpen the blade. Also, no link to any sharpening video poped up

[@AroundTheHome1]

The video pops up at 3:38 If you came to the video and are watching it from the search engine the pop up videos may not work. You would need to hit "Watch on KZbin" at the bottom. Anyways, here is the video. kzbin.info/www/bejne/hXvYY3iJfcSdgdk

[@rainbowsnbubbles]

@@AroundTheHome1 Thank you!

[@geraldemslander3010]

I don't have that tension screw on my 18"

[@carletonwood6558]

I have read in several reviews about oil leakage! I guess if you stored the chainsaw with the little oil hole facing UPWARD it might not be a problem. Several reviews have also mentioned the chain coming off frequently. Have you had that problem? Do you wish you had got the 16/18 inch bar? I’m in southwestern WV and appreciate your video😺

[@zaineridling]

I read this complaint often, but it stems from a misunderstanding of how chainsaws work. It's designed to leak to an extent, but if you leave oil in it during the offseason (as most people do for some reason), any brand of saw will seep a bit of oil. Therefore, when you're done with the saw for an extended time, simply drain the oil and you'll be good. 👍

[@AroundTheHome1]

I have not had a problem with the chain falling off. I also do not regret having the smaller one here and I think it is the perfect size for the average homeowner. I think that the people that mentioned that in the comments / reviews didn't know how to properly adjust the tension. And I have cut fallen trees with over 12' diameter trunk. Now, If I had a little bit of property I would just go for the 18". So glad to help! Thank you for watching. Check out hundreds more of our videos at www.aroundthehome.orgn.

[@3DTwinkies]

Oil leaking happens with virtually any chainsaw that, uses oil. The chain flying off, I just got the EGO 16" and yea, it came off like 5 times yesterday cutting trees. No matter what tension I set it at.

[@hbrown5068]

We have the 18” saw. The chainsaw kept coming off even after the tension was tightened. It came off so many times this week that the inside plastic mechanism by the screw which holds the blade and chainsaw needs repair. We’re taking it in today to a repair shop, under warranty. We do love the convenience of the battery, but I’m concerned this specific damage will happen again as the tension doesn’t seem to stay out. This is only the second summer season we are using it.

[@aarond4605]

Really unhappy with my EGO chainsaw. I have the hedge trimmer, blower and weedeater and love those. But this chainsaw simply isn’t working for me. I have had it about two weeks. Cut down a 20’ rose of Sharon with about a 10” base. Two much smaller ones followed but I had to stop because it’s not cutting anymore. My issues: 1. Chain comes off regularly. 2. Oil leaks all the time. Puddle under the chain saw every time I set it down. 3. Not cutting anymore. I’ve adjusted tension numerous times, checked oil cap multiple times, etc. Runs fine but doesn’t cut well anymore. Hard to believe it needs to be sharpened after 3 uses on smallish trees. Hard to believe I’m almost thru a quart of bar oil.

[@olliefrancesco5348]

thanks for the info... how is it going with the batteries?. I see that in the last year or so there have been quite a number of complaints about malfunctions Thank you

[@AroundTheHome1]

I don't have any 1 year old EGO batteries. My batteries are fine, seem to give me a solid 4 - 5 years. Honestly wish it was a little longer. Also I am doing good with the Amazon generic battery. Here is my video on that. kzbin.info/www/bejne/nHWbaoCIa96npZI

[@tonyssmarttechandtravel]

This is way easier than my greenworks chain saw, going to have simply move to getting everything ego

[@AroundTheHome1]

That's good to know

[@wing200q]

Thank you !

[@AroundTheHome1]

👍 So glad to help! Thank you for watching. Check out hundreds more of our videos at www.aroundthehome.org

[@socommaster]

Thanks for helpful video!

[@AroundTheHome1]

Glad it was helpful!

[@Mike-01234]

Mine doesn't have that adjuster on top it seems to be automatic adjustment I'm not sure I like it took the bar off now when I put it back on seems to get really tight didn't seem too before. I checked make sure the chain and bar were in the right places nothing was binding.

[@AroundTheHome1]

Which model do you have?

[@Mike-01234]

@@AroundTheHome1I had the CS1804 18" saw. I returned it to Lowes, and bought a gas-powered Makita made by Dolmar. I didn't like that bar adjuster, and with 2 batteries have about $800 invested too much for something has a goofy bar adjuster.

[@davidschwandt9741]

Where do the spare sprocket sold

[@cassandramonday9331]

We have issues with ours not getting oil on the chain. We try taking it off completely to see if oil will come out at all but nothing… any tips?

[@AroundTheHome1]

So you took the bar and chain off, then ran it and nothing came out?

[@cassandramonday9331]

That’s correct! We did all of that. It’s brand new as well. But we did clean it too just to make sure nothing was blocking it

[@AroundTheHome1]

Sounds like a defect if no oil is coming out of the seep hole. I might suggest to exchange it.

[@cassandramonday9331]

Thank you! That’s what we thought as well, but wanted to confirm before going through the hassle of exchanging it

[@coziii.1829]

Do you have all the ego line up ???

[@AroundTheHome1]

No, but most of it. I lack the snowblower, the zero turn ride on, and a couple of the multi-head attachments. I also don't have the brand new blower and string trimmer with auto line feeding. Might have to get those this spring to test out.

[@allenwalker2459]

I just purchased the EGO 18" saw, and the tension adjustment is different from all the video's i'm seeing. the large tension knob on the side is their, but not the small knob at the top, OR the screw on the front. i think my chain has to much slop in it, but there doesn't seem to be any way to adjust it other then the side "quick tension adjust"

[@AroundTheHome1]

@Allen Walker I really need to get the 18" saw and make some how to use, maintain, and a vs video for that. Hopefully I will get a chance to get my hands on one this fall.

[@hbrown5068]

We have this same EGO 18” saw. We had the same issue. The chainsaw came off many times. We’re taking into the repair shop today (under warranty) because the inside of the mechanism, the part where the blade/chain is placed is damaged from the chainsaw WHICH kept coming off. We read and reread the instructions. No other way to tighten the blades except the big dial. Had I known that there were others with the TENSION dial, we would’ve bought another one. Worried that this problem will repeat.

[@hbrown5068]

Update. Took chainsaw to small repair shop authorized by Ego co. It appears this problem, chain coming off, is a problem. According to the repair incoming scheduler, they’ve seen many coming in for repairs. They are limited on repair due to delays of parts. Many technicians have NOT been trained in repairs. Anyway, we left our machine and it may be a while for the repair process. It was not a good process to get to this point.

[@stateniland]

Hello.. ever since I've had this saw the chain falls off when in use.. no matter how tight I snug it up it the chain will eventually fall off the bar... any suggestions? thx Joe

[@AroundTheHome1]

Joe, thank you for your question. I have had this chainsaw for 3 years now and have definitely maxed it out. Honestly, having the chain fall off has not been a problem for me. And I have cut hard woods 12" thick with it and put it head to head with my Husqvarna 18" gas chain saw. I'm sorry that you have had problems, but I don't now where to really start with your request.

[@grantwes]

Is it possible you had the chain to tight or loose and the bar or guide got wore out and that’s why your chain has issues staying on? Not sure just a guess

[@kajunox]

My Ego chain saw died twice every replaced the motor once already.

[@josh.kaptur]

any ideas for if my ego saw is leaking bar oil when not in use?

[@AroundTheHome1]

Most every chainsaw that I have used would slower seep the bar oil out. I just empty the bar oil back out when I am done because I know it will be very many months before I get it out again.

[@tuifilipo9958]

Very helpful thanks..👍😊

[@AroundTheHome1]

Glad it was helpful! Here is our webpage with everything EGO. www.aroundthehome.org/ego-power-plus.html

[@tuifilipo9958]

@@AroundTheHome1 Awesome, thanks very much.👍

[@davidchang8428]

Can you put a 22 or 24 inch bar on it?

[@AroundTheHome1]

I really don't know. Haven't tried to install larger bars on it. Maybe someone else in the community knows.

[@BonkersGameplay]

why does mine not have an adjustment wheel

[@AroundTheHome1]

What size saw do you have?

[@nancynga6820]

I think they dropped that wheel with the newer models. Lots of complaints now about chain not staying tensioned.

[@mastershredder2002]

I've found the window to be completely useless. Why not make it actually transparent instead of opaque? Can't see crap.

[@mountainman1453]

Good to wear mechanical gloves when maintaining a chainsaw. I took a good cut to a finger with a sharp chain.

[@AroundTheHome1]

Good tip. 👍 So glad to help! Thank you for watching. Check out hundreds more of our videos at www.aroundthehome.org

[@OldMtnGeezer]

OK.

[@AroundTheHome1]

yep

[@grantwes]

Don’t go “Roid-in out” LOL any Normal dude should know exactly the Torque Spec of “NON ROID” tight!

[@AroundTheHome1]

You got it!!!

[@elmerfudd7674]

Just won an 18" EGO. leaks bar oil constantly. Most people around here put a chainsaw in the back of their truck or SXS for a reason. So it is ready to go when they need it. If I have to empty the bar oil reservoir every time I use, I will sell it. Worthless POS.

[@AroundTheHome1]

I really need to get the 18" to test it out for everyone.

[@elmerfudd7674]

@@AroundTheHome1 14", 16", 18" 47" different bar lenghts, same POS saw. I called EGO, solution they gave me was to empty the tank after every use. You wanna buy it??

[@AroundTheHome1]

You could sell it easier locally, get more money and not have to ship it. But thanks for the offer.

[@Robnap88]

I have three diff size EGO saws and not a single one came with the oil filter. Did you add that yourself? And that adjuster knob for your chain? I have the traditional scrench screw for chain tensioner on all my saws.

[@cindymcmurray4874]

Thank you!

[@AroundTheHome1]

You're welcome!