NE555 IC Projects | NE555 Projects | |NE555 LED Chaser | NE555 LED Flasher | Timer IC LED Flasher |

[@Nameless-7018]

I tried and it worked 🎉

[@tanmoygiri7179]

Mine not work i do the same

[@polysaha8555]

It is worked . Thank you

[@Hafizsamsung-h6m]

I tried it, I changed the 150ohms resistor to 470 ohms so that the LED lasts longer, the circuit works, thanks for the video, I have subscribed

[@Hafizsamsung-h6m]

I made it for my bike 

[@TechnicalChiragTC]

Thank you 🥰

[@onlywayisforward]

Well done 👍 💯❤️

[@michelmkts]

The 150ohms resistor is burning here! I’ve used 470ohms and it’s fine. I’m using just 2 leds, but intend to use 12 LEDs.

[@TechnicalChiragTC]

Please use exact value components. .

[@dipakkelectronic6878]

Nice 👍💡

[@intercon1449]

keren sekali😂🎉

[@Spacesaber729]

Can I replace it to 22uf capacitor? I dont have 10uf

[@ayushdubey9447]

Yess this is muchh better to 22uf for this

[@Prasetyo888]

For 3-5 volt batteries, what needs to be replaced?

[@abebeoljira3162]

Wel done

[@Phamdinhloc22100]

Pretty well

[@freyazhuang8230]

I do not have 10uf capacitor...is there a way I can replace it with 22uf?

[@stewartmcminn7773]

Would this work with only 3 LEDs on 3V??

[@TechnicalChiragTC]

Dear, I don't think 3v will work for NE555 ic ..

[@stewartmcminn7773]

@@TechnicalChiragTC 😔😔

[@leoqin331]

so cool

[@Eid-v7e]

12 volt bulb fitting circuit diagram post bro

[@ChannelSobari]

Mantap

[@Mithun_Kirish]

😀

[@michaelpo1837]

Where can we buy like this as my sample so I can make this

[@TechnicalChiragTC]

Electronics shop buy components. .

[@barnabastoma1075]

​@@TechnicalChiragTC How does the circuit works? When the capacitor discharges,than the blue LED- s working,and whan its charged,than the other? Can you explain the mechanics behind it?

[@PhongTran-ln6uo]

😂❤😂

[@jizzchugger]

Is the first battery a 3v battery?

[@TechnicalChiragTC]

Yes, it's CR2032 Coin Cell 3v

[@jizzchugger]

@@TechnicalChiragTC thanks!

[@creative1059]

Bistable mode?

[@RenPonce-h1o]

Can i only use 3 led ?

[@akashkumarbenbanshi9721]

Sir yeqh mashin mujhe bhi chahiye

[@haphazardthought5006]

How about 3.7 volt Battery? Can u suggest resistors for 3.7 volt??

[@TechnicalChiragTC]

Dear, their may issue. Kindly read manual datasheet of NE555 IC .. Min 4.5v DC required.

[@Harmesh3794]

How to connect potentiometer

[@MD_Areeb]

just remove the resistor and replace it with 100K potentiometer for speed control 1st pin to 555 ic's 2nd pin and middle pin to 555 ic's 3rd pin and leave the 3rd potentiometer pin.

[@tudordrug8448]

Can you name the components?

[@TechnicalChiragTC]

NE555 IC 8 Nos 5mm LED 4 & 4 different colors 10uf Electrolyte Capacitor 33k ohm Resistor 2 nos 150 ohm Resistors 9v DC Supply Battery

[@rumam_bettafish]

not working in my projects, only 1 side lamp turn on,

[@TechnicalChiragTC]

Check led Polarity of another LED ..

[@sudhirkankal]

Dear, i tried, it does not work. led don't fliker. I tried adjusting the 150k with potentiometer and changing the knob actually at alternates LED. But it's not automatic

[@TechnicalChiragTC]

Dear, use values resistors mentioned in video.. it will perfectly work.. also make sure led polarity set ok or not ..

[@sudhirkankal]

@@TechnicalChiragTC let me give a try again

[@sudhirkankal]

@@TechnicalChiragTC it works. Led brightness increases by reducing the resistance

[@officialgitesh]

Bhai ye 12v mein work kar sakta hai?

[@TechnicalChiragTC]

I will make for 12v .. let me think !

[@robertodeluna6390]

Faltou o passo a passo para que os iniciantes entendam.

[@pannkajkumar4415]

Kha milta he ye sman

[@TechnicalChiragTC]

Electronicscomp.com se online

[@Hackercreationnitin]

Background music name 🤔

[@TechnicalChiragTC]

Lensko Let's Go! NCS Music

[@johnjgb6178]

Tried it but it cooked the chip

[@shadow_gyt]

To

[@nadirimam0]

𝔾𝕠𝐮𝐞😂❤

[@mehdifazeli5701]

Not working😵‍💫😵‍💫😵‍💫

[@TechnicalChiragTC]

Don't reverse polarity to NE555 ic .. If you powered with opposite polarity to ic .. IC will damanged

[@dandeib]

Bei mir läuchtet nur 1ne farbe

[@TechnicalChiragTC]

Überprüfen Sie die Polarität der LED-Leuchte und vertauschen Sie auch nicht die Eingangsklemme ..

[@dandeib]

@@TechnicalChiragTC bemerke gerade ich habe kein 150 wiederständ kann man da auch was anderes nehmen?

[@Rahul-qh7qc]

1500 ohm or kohm

[@TechnicalChiragTC]

150 ohm resistor ..

[@ElectronicEasy123]

Dear sir,🙏 If we have a input of 4 volt What can we add or remove in this circuit To run 4 leds Please reply and help me about it🙏❤️

[@TechnicalChiragTC]

Not work .. 5v needed to run NE555 ic .. try with 5v

[@mr.surajitsahoo2535]

Fake

[@Hafizsamsung-h6m]

Its real