How Not To Build a Custom Pistol

[@ksibehindthescenes3156]

Yooo, it's airsoft Gordon Ramsay

[@tyleralo1598]

KSI behindthescenes 🤣

[@speedybois2636]

Yo hat was my first comment on one of his vids

[@jackrodriguez438]

That was the most spot on description of negative airsoft

[@desertratedc9596]

I said the same thing after watching a couple of his videos. Angry British guy who is a wizard in his trade.

[@Yawnymcsnore]

He literally changed the exact stupid aluminium nozzle on my gun he was completely correct

[@TriadAgone]

My new favourite airsoft channel. How did I not find him until now ??

[@mannox775]

Same

[@davidstandish4767]

I know you probably don’t care about my opinion. But I love your disposition. Keep up the great vids!!!

[@rachelpurity1]

What I took away from this vid: The polymer nozzle is to my GBB like the gastube is to the AR15, meaning it's designed to fail before anything else breaks and flings shit at my face.

[@blank8969]

good advice. building my own tm g18c. though, i can say that the stock recoil spring is actually pretty weak for metal slides. it works, but it bottoms out hard. helps push it over the hammer rotor on the way back, too.

[@llamudos9809]

At last we see a guy who is clearly knowledgeable, skillful and experienced that give know BS. He is real and does not care about hurting anyones feelings. God bless individualism. Never change.

[@lowguidoschopshop]

I don't generally watch Airsoft videos, but but when I do, they are yours.

[@Bryghtblade917]

I learn more watching NA videos than quite literally any other airsoft channel on YT! And the extra salt is hilarious! Keep up the excellent work, now onto the next vid!

[@anttechairsoft]

Great info on gas guns! GBBs are def my weak point so I turn them down when asked to repair them. You’ve cleared up a lot of info regarding the proper function on GBB pistols.

[@notsoquiet6598]

Learned more in 8 minutes than in a week of other vids, thanks Negative, instant sub.

[@demiansson]

Love the silent hill music dude

[@HAV0X_]

so i have a WE g18c. should I shave the slide where you showed at 3:35 or is that bad? will it prevent the outer barrel from cracking? what should i use?

[@themanthelegend7048]

Hey what's the best berretta m9 put there. I have an umarex m9a1 that I put a threaded barrel on.

[@rachelpurity1]

The heavy spring is for slide mounted reddot sights, isn't it?

[@douglasduda9826]

Glad you have Even more experience than I do, I found it can help to polish some surfaces inside of the slide to get an ultra smooth experience. I found that all the black coated crap often causes more issues than it would help had they just left the parts unpainted/unfinished. I was curious about that, i picked up a 2nd hand g18c and much the same i had to go through quite a few different hammer springs to get 1 that would half way work. I Still do not have it 100% where id like. Even with the "best" at the time hammer spring. Don't even bother with a guarder spring for a glock mine broke within 1 mag.

[@MrBloobeetle]

nice vid, the music......was at a nice level to hear you better...….love your honesty, keep it up!

[@NegativeAirsoftTech]

There were comments on this vid that say they can't hear me.... lmao

[@MrBloobeetle]

@@NegativeAirsoftTech need to clean there earholes out! some of your other vids the music is interfering with your cometary. must admit to looking up a few of the track......and some bring back good memories of a misspent youth!!!

[@billyjeyjey666]

Hey i have a glock 17 gen 3 from umarex, and i think that the shot goes wide , it's possible ? Im new with airsoft ,

[@jgale2472]

I know my gas guns, I know my gas guns, I'm right and you're wrong 😄👍 Tiny nit pick is that you didn't have the slide back when you changed the fire selector. If you have the slide forward it bends one of the parts right at the back over the full-auto sear. Other than that though mate spot on, really helpful 🤟

[@ALEX-xd7ko]

Hey you didn't mention that this g at least has the gen 2? Hammer wheel.

[@kablehunter060]

My my, that Silend Hill The Room theme song is so relaxing mixed with the video

[@Colt.trautmanairsoft-cb9fi]

Interesting learn alot from yor vids old n new

[@M41610]

stupid question here, i want a threaded barrel for my umarex glock 19 gen 4, can i spray paint it to a different colour?

[@Colt.trautmanairsoft-cb9fi]

Can u make 1911 gbb with full auto n semi they make one after ww2 firearm

[@smorris227]

Could you a video on Glocks what to look for as far brands and avoid

[@Feels_Lucky]

Where can I get an upgraded slide for the G18C like titanium or something stronger than the chineseium metal we used

[@NegativeAirsoftTech]

So long as its machined 7075 aluminium, it won't crack unless you smash it.

[@adamcolville2057]

Once again awesome vid, the pistol king was right! And proves that just because you can doesn't mean you should.

[@Colt.trautmanairsoft-cb9fi]

Ksc version sluggish after i put metal slide on

[@willowrabbit]

Was sent a shoe box of parts when a guy tried to build a STEEL g18 build. Put half the parts in backwards and the other half was not compatible. Took me a few months to get all the correct parts in and then fit everything. Guy had the aluminum nozzle in and it didn't even seal to the magazines lol.

[@James-C24]

Interesting video. Some tips i can take for when i upgrade my WE.

[@NegativeAirsoftTech]

Change the rubber, leave the rest alone bud. If you want long life span a full steel hammer mech but honestly, just buy a complete WE lower instead for the same price. The WE hammer spring is strong enough to open the valve on any gas.

[@Yawnymcsnore]

This guy has fixed and advised for my gas guns every fucking week I used to go to the mall be really knows his stuff!

[@James-C24]

@@NegativeAirsoftTech ah ok. I own a WE and ive owned it for 4 years with zero maintenance in its first year of ownership as i was a bit i unawares of the maintenance required. Currently i cant decide weather to retire it and buy a VFC G19 or plow money into my current WE.

[@NegativeAirsoftTech]

@@James-C24 we

[@AlexLintonUK]

one part you really should get is a 8mm hammer bearing. really helps with the smoothness of the cycle and stops it jamming up near the hammer assembly

[@TinkerPrepper]

Can you imagine if this guy had a half hour show doing wilderness oil paintings. "Now let's put an F-ing tree right here. And these mountains look like Sh!t so let's leave them right there!" 🤣

[@NegativeAirsoftTech]

Hahahaha!

[@Cheese533]

What else would you recommend on a Glock? Already got a Poseidon hop up and short stroke on it running on 80 psi

[@douglasroehling]

Hi what what upgrade can I do to my vfc glock 19x and what GBB mp5 would you recommend thank you

[@majdikayyali7593]

Douglas Roehling go to his facebook he responds there

[@airsoftuniversity]

❓Neg, what would/do you do in the case of a KWC Beretta that has a hammer binding on the underside of the slide, causing it to get stuck towards the rear occasionally during automatic fire? I ask because you say to only take material from the slide, but in this case it's not really the ideal solution. File the hammer at the contact point a bit, right❓ Better question yet, how did they not notice this happening during development ..? 😂

[@NegativeAirsoftTech]

It means the sear or hammer have worn & now the hammer can't be held back as far, new sear or hammer

[@airsoftuniversity]

@@NegativeAirsoftTech So it's the ratcheting portion? Lemme do a quick teardown and investigate ..

[@airsoftuniversity]

@@NegativeAirsoftTech Nope, that isn't it - but I kinda suspected that wasn't the issue hence my earlier question. The gun has probably cycled less than 200 rounds so far. The hammer, when locked in it's "intended" position drags along the bottom of the slide (in particular, the housing for the piston assembly.)

[@NegativeAirsoftTech]

@@airsoftuniversity & it's a KWC?

[@airsoftuniversity]

@@NegativeAirsoftTech Yep. I can see where there is another tooth the hammer could possibly rest on but I feel like there was a defect in half of the hammer. It seems oversized which is preventing it from engaging that tooth

[@tylermolnar90]

This guy is funny af 💀😂😂😂 +1 sub

[@enen7188]

yo where that first song is from? i member it from somewhere but dont know where.

[@enen7188]

nvm i think its from silent hill

[@andrewblackmore3150]

I'm at a loss why anyone fucks around with a TM pistol at all tbh. They perform brilliantly out of the box. Could you put what the music is in the description on the videos? I've watched a number where I've thought "That sounds good, wonder what it is"

[@NegativeAirsoftTech]

I often need to remix the music for length, silent parts, matching up the what's on the screen... That was 3 versions of the same track from the Silent Hill 4 ; The Room OST remixed by me :-)

[@andrewblackmore3150]

@@NegativeAirsoftTech I don't know where you find the time to sleep :)

[@NegativeAirsoftTech]

@@andrewblackmore3150 I often don't... LMAO. 80 hours a week average

[@andrewblackmore3150]

@@NegativeAirsoftTech Jesus, that's quite a work ethic

[@NegativeAirsoftTech]

@@andrewblackmore3150 real job 35 hours a week, Negative Airsoft, my airsoft sites... if you want to PayPal me £6 For a bottle of red wine, I'm all ears! Lmao

[@jacobdamien-brad3527]

have you ever worked on a classic army glock 17

[@adhdairsoft8269]

Ok metal nozzles in pistols are bad but what about we tech gbbrs?

[@NegativeAirsoftTech]

Same

[@mikemegadeth4110]

Jesus christ there's well over a hundred there! Your amazing

[@isaacshively6705]

Are you able to HPA tap my WE P90

[@devinrankin3096]

First video I watched of his, fucking love this channel

[@morgonfr33m4n1337z]

Metal loading nozzles are just a bad mistake, take it from a WE M4 user

[@serioussmoke1123]

Correct run a WE myself : )

[@menya_]

Me seeing my first Negative Airsoft video: Damn this guy's tone is very rude. Me seeing 2193987. Negative Airsoft video: How stupid people can be and how is he still sane??

[@Colt.trautmanairsoft-cb9fi]

Like vid rambo music in the background

[@Yawnymcsnore]

This guy has fixed and advised for my gas guns every fucking week I used to go to the mall be really knows his stuff!

[@andyg290]

Educational as always 👍

[@rogerborg]

[Laughs in £56 Army Armament R17 + Maple Leaf rubber] From BBGuns4Less, even. Yes, I know. But they delivered what they said they'd deliver, next day. I'm as astonished as anyone to find that these thing actually work. That's all you need to spend on a usable G17. The Maple Leaf is just gravy.

[@NegativeAirsoftTech]

With you 100% - I have 24 Army based Glocks

[@HonzaZalabak]

4 guys in my team are using kjw glock 19 and all of them are strugling with power to cycle properly

[@brorjordas1979]

Yet another awesome NA video.. I oughta be a new.subscriber by now.. Apparently he totally knows his airsoft GBBs.. Soo.. How about a full taredown of the whole ASG CZ Shadow2? I'd be interested to see what tv fuck (sorry - cussing is a must on this channel) he has ro say about that one..

[@SupeS19811981]

What are your thoughts on the TM Glock 22?? I really like them but a lot of the reviews don’t seem reliable. You know your stuff. So I’d rather have the opinion of someone who knows what they are on about. Cheers 👍🏻

[@NegativeAirsoftTech]

Haven't even fired one ... :-(

[@SupeS19811981]

No problem. Think they are similar to the G17 and the reviews of them seem pretty positive. I’ve just bought a TM Desert Eagle. So don’t think much else would get used for a bit. Cheers anyway

[@AbdulazizKoleilat]

Love your videos mate, subscribed!

[@Garbeth]

sweet, a lesson of how not to do things. great job mate

[@douglasroehling]

Hi what are the best gas blowback pistol thanks

[@NegativeAirsoftTech]

There's a whole video on it on this channel bud

[@MrRabidmole]

Since you have so many gbbs, have you ever had a MAC 11 thats reliable? I have a kwa ns2 and its nozzle design is awful

[@NegativeAirsoftTech]

The Maruzen is the best you'll get but it has no hop up

[@lmostayoutuber]

Just sold my maruzen mac11 to my friend, I like the fact that it uses the same mags for the maruzen micro uzi

[@notoriousairsoft467]

Love this guy

[@tonigarau5173]

Very impressing.

[@setsuna200]

I would make him my 1911 for him to do a proper upgrade on it.

[@Matt3DMaker]

The barrel drop mod is better than filing the slide imo, but it’s not like you had a choice when they’d already hacked at it 😂 the aluminium nozzles are absolute shit, no reason for them at all unless you hate your bbu

[@turtle_6067]

I think he knows a little about gas guns

[@Colt.trautmanairsoft-cb9fi]

Wish som1 make mac10 gbb

[@apathtrampledbydeer8446]

ROOOOOM OF ANGEEEEELLLLLL!!!!!!!!!!!!!!!!!!!!!!!! Sorry, got distracted, good advice!

[@Colt.trautmanairsoft-cb9fi]

Like yor armoury

[@butters2160]

Fucking love you mate

[@valhallaoperationsgroup940]

Holy fuck, please do a collection video 😲😁

[@Colt.trautmanairsoft-cb9fi]

Yes

[@TV-xc5ut]

this guy has more gas guns than evike

[@chavyb8136]

Ggggggget fucked! 🤣🤣🤣🤣🤣 Legend

[@Ak1M1223]

So basically my we 18c is a masterpiece :v

[@Briggsian]

Some people on the internet say that WE aren't good, but a shit ton more who actually know how to maintain them love their WE's

[@darylobey8867]

My we 18c was a fuckin beast :) sold it to a buddy and its still working a few years later

[@jackfwoodward]

Then theirs me, wise advice from an amateur bedroom techie; DOUBLE FUCKING CHECK that the trigger spring for your gun (In my case, a HK3 PX4) is NOT the compact one, and is instead the full size. And FUCKING DON'T tighten an internal hex screw into a plastic body to the point that it strips. Thanks for coming to my TED talk.

[@Colt.trautmanairsoft-cb9fi]

Except old 30 yr guns

[@bigrig8539]

Me: Bu- Negative airsoft: g-g-g-g-g-ga get fucked!

[@Colt.trautmanairsoft-cb9fi]

Like c glock 18 in side m11 body like sonsofguns epesode

[@DatEcuaRicanDude]

Who here loves We-Tech glock 18c ?

[@johns3655]

no one

[@gixxermeric9880]

More more more :)

[@christianibarra4615]

If you would like to donate me a gas pistol lmk lol