I just got one of these and it now has an on/off switch where the power plugs in. Also, instead of having to use the Allen wrench to adjust the laser, wing nuts are used to tighten and loosen the laser head.
@999LF3 жыл бұрын
The best thing about your video (of a few good things) is the amazing quality of the video. Perfect sharp images for everything. It's a pleasure to watch! All the best.
@Neo7CNC3 жыл бұрын
Thank you so much for the kind words. It's very much appreciated!
@generalpattonpending72562 жыл бұрын
Thanks a lot for the video. I just bought one today. I've had an up-graded K40 (LightBurn) for 2 years, looking forward to using it.
@dmagill42 жыл бұрын
To etch or engrave stainless or glass -- put transfer tape on it first, burn through the tape... I think that will get the result you want. Nice video.
@geektoolkit2 жыл бұрын
Really well done, I love the enclosure you came up with! Some great info and some excellent demos, and a really easy to listen to voice. Great video!
@Neo7CNC2 жыл бұрын
Thanks so much! I just released a review of the Atomstack X7 Pro today. It's very powerful,
@zekeking2 жыл бұрын
Thanks for the comprehensive video, Dave! I saw this model on sale for Amazon's Prime day, and your video came up when I came on KZbin to see what other peoples opinions were before I pulled the trigger on this or another laser engraver. :)
@Neo7CNC2 жыл бұрын
Glad I could help! I hope you have fun with it and thanks for watching!
@unopine3 жыл бұрын
Thanks for showing so many different examples. Very helpful! Also, nice job on the fume hood- no doubt it performs as professionally as it looks.
@Neo7CNC3 жыл бұрын
Thanks for the nice comments Steve. Much appreciated
@alanmetcalfe2350 Жыл бұрын
one of the better presentations i,ve seen. nice job
@1990notch3 жыл бұрын
I recognize those Chatsworth Products rail pieces in your shop. I've set up many of those racks over the years. There are enhancement coatings for etching stainless. I seem to remember reading even a coating of mustard will help.
@bedandbreakfastfan70882 жыл бұрын
Best review video I've seen for anything in a long time.
@Neo7CNC2 жыл бұрын
Thanks for watching!
@billmutschler63593 жыл бұрын
Thanks very the good overview. Tells me what to expect. Also the DIY hood. Important. I bought one (esp. with Lightburn) to get up and running faster than a K40.
@PacoOtis2 жыл бұрын
Thanks Dude! Very professionally delivered with excellent information! Best of luck!
@Neo7CNC2 жыл бұрын
Thanks so much Joseph. I appreciate you watching and commenting!
@jimslasercreations22212 жыл бұрын
Hey Dave loved the video and information, I just received my atomstack a5 pro and so far it's definitely a learning curve but I've gotten all kinds of ideas now. Looking forward for more videos
@Neo7CNC2 жыл бұрын
Hey Jim, you'll get the hang of it pretty quick I think. Especially if you're using software like LightBurn to run it. Let me know if you have any questions and thanks for watching.
@jimslasercreations22212 жыл бұрын
Thank you so much Dave, I'm using lazerGRBL, I wish I were using lightburn but no apple products yet, figuring out the sizeing, how to burn bigger areas, probably could have said that better but still waking up, no morning coffee yet lol
@electranspower3 жыл бұрын
Good morning! Thanks for the great review. Looking into a laser and this is a nice, small, and simple solution. Haven’t seen your content pop up on my feed lately... Looks like I need to catch up! Thanks again and have a great day!
@Neo7CNC3 жыл бұрын
Thanks for the comment! I plan on doing more frequent videos.
@johnknestis38512 жыл бұрын
So, pretty much every recommendation you made to improve this engraver the manufacture implemented. On/Off switch-check. Knob to adjust the laser height-check. Directions on how to download and use the software-check.
@Neo7CNC2 жыл бұрын
Maybe I'm on to something :)
@ABWOrturLaser3 жыл бұрын
The current A5 Pro, now has a power on/off switch.
@robertschmitt22282 жыл бұрын
Loved this video, thanks for your time and efforts... maybe something about using the Lightburn software would be cool... Stay healthy best wishes to u and your family... Germany
@Neo7CNC2 жыл бұрын
Thank you Robert! I'll definitely do a LightBurn focused review as soon as I can get it on the schedule :). I have a few more product reviews to get out. Thanks for watching and commenting!
@DirtEChip2 жыл бұрын
Thanks David, hit all my questions and then some!
@Neo7CNC2 жыл бұрын
That's awesome! Glad I could help.
@AeroLaserengraving Жыл бұрын
just thought I would jump in here and tell you new egg has this product on sale so i thought i would look up a video on it and yours was the first one to pop up.
@rustyjrandolph63942 жыл бұрын
Your video is Great and very informative, im new to all this but learning as fast as I can. I used to build boats in Lake Havasu AZ. for about 15 years but now on disability with all this knowledge with wood resin and gelcoat I figured lets put a Laser in the mix! To be honest I was asked if it was possible to engrave something into stone for my Father in Law who was buried in a family cemetery just inside of the Arizona New Mexico boarder. My second choice was a powder coated panel over steel but I couldnt do any kind of shading, just black and white and I think I could do better than that. Id love our feedback and thank you again
@JSGilbert2 жыл бұрын
You can swap out those screws with a couple of thumb screws. About $1 at any hardware store.
@Neo7CNC2 жыл бұрын
Good idea!
@Later2u Жыл бұрын
Great review covering set-up and types of materials that you tried. I would of liked if you touched on the software side, like what do you use or can use and how you feed the program in to the controller. I use FreeCad and Cura for my 3D printer. I'm sure I can use FreeCad for designing, but a reference to what the engraver wants to see would be helpful. Thanks again.
@sandrateichmann89272 жыл бұрын
For stainlesssteel: spread a thin layer of mustard on the area to engrave. It will work wonders!
@Neo7CNC2 жыл бұрын
I'll have to try that! Thanks
@Neo7CNC3 жыл бұрын
Thanks for watching everyone! Here's some time stamps if you want to skip around this longer than usual video 1:29 Packaging 2:29 What's included 3:02 The hardware manual and user guide 5:10 Machine setup 12:01 Safety 13:53 My hack enclosure 14:35 Engraving and cutting examples 22:35 Future Dave 23:27 Final thoughts 25:00 Blooper
@MrJaxparadize2 жыл бұрын
The website doesn’t have the manual with any more info than the manual it came with. What site did you use? I went straight to their website.
@stevepustay79452 жыл бұрын
I got the A5 Pro + and they listened to him! They fixed the hardware issues he talked about! I just cant get my laser to engrave, its like the laser is not on!
@mikeb.15232 жыл бұрын
I would have liked to heard how long each image took to burn and at what setting. Would get a good idea of what it could do time frame wise regarding the size and complexity of image. Thanks
@Neo7CNC2 жыл бұрын
Hi Mike. Did the laser deep dive I did a few weeks back answer any of your questions?
@thomasutley3 жыл бұрын
Nice. I’m in the process of getting quotes for an entry level fiber laser for engraving machine tags, and I’m swimming in information and pricing overload. I sure wish I could use something this simple!!!
@Neo7CNC3 жыл бұрын
Simple for sure but I've see what the fibers laser do and that is awesome but with a price to match. I'm sure you'll get it figured out. Look forward to seeing what you make with it when you get it.
@MSmith-jf5wo3 жыл бұрын
On those wooden earrings, use wood hardener to make them a LOT "tougher" - and not so weak at the top (Minwax comes to mind).
@Neo7CNC3 жыл бұрын
Thanks for the great advice!
@markpain58453 жыл бұрын
Great review, informative. How well will it mark or cut on copper clad, and aluminum. Thanks
@Neo7CNC3 жыл бұрын
It's not strong enough to actually engrave the metals. With the painted aluminum card I showed, the laser is selectively removing the paint to create the image. On the stainless steel, it's annealing the metal to change its color to create the image. Thanks for the comment and for watching.
@chathurangarajapaksha14843 жыл бұрын
I leaned a lot. Thank you so much !
@Neo7CNC2 жыл бұрын
You're very welcome!
@MnACreations3 жыл бұрын
Thank you for sharing! Very helpful!
@trashcat24982 жыл бұрын
Hi Dave, I'm thinking about getting this machine. I want to do some smaller projects on it like dog tags and was wondering how easy it was to make sure everything is lined up and perfectly centered.
@Neo7CNC2 жыл бұрын
Hi! One thing that I do for small parts is to make an outline job that I run before the final piece. I'll have a backer or waste board fastened down and also make sure the machine can't move. You run the outline job fist to outline the target area, then place the real target piece, set focus and then run the real parts. Hope this helps!
@hagtangchighao58173 жыл бұрын
Thanks for the review. That looks interesting.
@comelordjesus40783 жыл бұрын
I did the exact same thing u did same setting same machine same software same material.. and yet it took me 30 passes and it didn't even cut through. Eventually I decided to use 600 mm/min and it did eventually cut through but wow... took forever. Could u make a video of the process u took to get there? I'm using lightburn and 3 mm plywood.
@Neo7CNC3 жыл бұрын
Because of your question and a few others, I think I'll do an additional video on the laser showing my process. Stay tuned and thanks for the inspiration.
@AliRashidCh3 жыл бұрын
Try to use a vector file or .svg. That reduces the times three folds. I'm still a newbie but thats one thing I found out when I was doing my experiments. I used a text file from photoshop as a standard image and saved another file as an svg from photoshop. The same text had different times. SVG definitely cut faster than the raster file. Hope this helps.
@comelordjesus40783 жыл бұрын
@@AliRashidCh im using autocad so dxf.. how do I covert to svg
@AliRashidCh3 жыл бұрын
@@comelordjesus4078 im Sorry i wasnt able to read and reply to your message earlier. Which version of Autocad are you using?
@tizzsy60563 жыл бұрын
@@AliRashidCh Does this mean you can use Cricut SVG files? I sent mine back, didn't like it, but I still have the files.
@joninx2 жыл бұрын
Nice video!! I've bought the same machine. However, I'm struggling and trying to learn the configuration for each material... Do you know any place to learn about it? Thanks!!
@Neo7CNC2 жыл бұрын
Hi, Everything I've done to this point has been by experimenting and finding what works for the specific material I'm trying. Some engraver manufacturers offer recommendations. I've included the speed, laser power and number of passes for all my tests in recent videos. You could also start with my settings
@jcgarcia91022 жыл бұрын
Great video. Very informational. I just purchased mine and I'm having a lot of issues getting everything connected through lightburn. Ive read forums and watched videos but there isnt a lot of helping when talking about macs out there. Can you provide any insight on assistance in the matter?
@Neo7CNC2 жыл бұрын
Thank you for the kind words. I'm not a mac guy I'm afraid. Can you tell me what's going on or what errors you're getting? I'll try to help.
@neotronicssa65123 жыл бұрын
Great review, thanks so much!
@celso01s3 жыл бұрын
Nice review! Have you tried to cut thicker materials ? Have you tried to use “air assist” to help cutting thicker plywood or any other material?
@Neo7CNC3 жыл бұрын
I haven't tried anything thicker than the 2.6mm plywood I cut in the demo. I'll have to look into the air assist. I didn't know it was a thing.
@custampin6 ай бұрын
Thanks so much! Great video!
@hamps8563 жыл бұрын
great job David, very informative
@Neo7CNC3 жыл бұрын
Thanks Hamp!
@lighthousemaker58342 жыл бұрын
Hi Dave Loved your video on this product and was looking for a cutter to create windows for my bespoke Lighthouse models. Questions: 1. Can this laser cutter/engraver do a mixture of cut-out and engraving depth? For example, I want to make a four-pane window, and on the outside of the panes, I have a rabbit recess. Is this possible? 2. Can google Sketchup be used for the design software?
@Neo7CNC2 жыл бұрын
Thank you for the kind words. 1. Are you wanting to engrave/cut acrylic for the windows? If so, I believe it should be able to etch the pane outline but I'm not sure about the rabbit. It might put too much heat into the material. Also the color (or lack of color) of the acrylic will add complexity. I can cut dark acrylic but lighter, transparent colors act differently to the laser. The small detail and rabbit you're looking for may play better with a small CNC machine. 2. I'm not a Sketchup user but if it can export any of these file types (NC, BMP, JPG, PNG, DXF) it should work.
@brettfaris98832 жыл бұрын
Hey Dave thanks for the video. I am a woodworker and also do graphic design. I use Adobe Illustrator and I’m interested in trying to use laser cutter/engraver to come up with different items. I could something like this being a great addition to a woodshop to do different things with. Is there a steep learning curve to learn how to use something like this? I have never used one. Is the software to run the machine difficult to use? Final question, could I export something from Adobe Illustrator and use laser engraver to cut/engrave it in wood/metal, plastic etc? Thank you for taking the time to answer my question and your video
@Neo7CNC2 жыл бұрын
Hey Brett ! Thanks for stopping by. If you're using Illustrator then I think you'd be a quick study on Lightburn. Based on a comment from another viewer, I'm going to do a showing how to get started with a laser and the software.
@richardjaffe46543 жыл бұрын
I am new to laser engraving and trying to get familiar. Does anyone know what the minimum and maximum speeds are for the ATOMSTACK A5 PRO 40W Laser Engraving Machine. By the way this review was very helpfull.
@AbgaryanART3 жыл бұрын
Thank you very much!!!
@jf67202 жыл бұрын
Love your enclosure, I have seen elaborated designs that I'm pretty sure are less effective. My question, is corrugated plastic fire retardant or did you order something special?
@Neo7CNC2 жыл бұрын
It’s nothing special. Definitely not fire retardant. I’m always near and never leave the machine unattended. But you do bring up a good point.
@Powerstrokemods2 жыл бұрын
Since this machine took so many passes to complete some simple tasks, and did a sub-par job on etching the stainless, can a more powerful laser be retrofitted to it, or maybe it can be tweaked to perform better? Maybe a 10 watt laser would do better.
@Neo7CNC2 жыл бұрын
Hey Ken. These machines aren't powerful enough to actually etch the stainless. They really only cause a color change by annealing the metal. You can't tell any difference when you feel a marked or unmarked section of the material. A fiber type laser is much better suited for actual material removal in many metals. Thanks for your comments and questions.
@jungsomewhat3 ай бұрын
Would be no nice to see the software setup😮
@Keif009912 жыл бұрын
Do you have a video linking/calibrating this unit and which program you used?
@Neo7CNC2 жыл бұрын
I've added this to the "to do video" list. It will be a good topic. Thanks for the idea!
@georgemcaldeira56327 ай бұрын
Hello, Can you please do a video test for cutting ABS plastic 4mm? Thank you
@egeli22943 жыл бұрын
Totem S 40W / NEJE Master 2S Max / Atomstack A5 Pro / Ortur Laser Master 2 pro I found the four. would like to know which one of the favorites is and which one is best for small knives, normal kitchen knives, silver key rings, zippo, silver engraved bracelet for children. thank you in advance for the help and information I will get. nice day
@Neo7CNC3 жыл бұрын
I've only tested the Atomstack so I can't speak to the others. I will tell you that this type of desktop laser will not truly engrave metal. It only anneals certain types of metal (stainless in my case) to cause a color change. You'd need to look at a fiber laser or similar for true metal engraving.
@VHERSACNC3 жыл бұрын
Very simple, and the build quality is really good for the price. Thanks Dave. lol.. Take 459 lol.. nice touch.
@Neo7CNC3 жыл бұрын
You can get it for closer to $300 from Banggood. Amazon is currently the most expensive option.
@LaserAnia2 жыл бұрын
Dear David, thank you very much for your video. It was very helpfull! I completed set up just in 15 min. I would like to ask, did you ever try engraving on granite with this specific model and, if so, what are settings you recommend. I was trying to engrave on granite with settings of stainless steel, and I was surprised, that laser is understaning b/w colors versa. So you have to invert image before engraving. Have you tried?
@Neo7CNC2 жыл бұрын
Hi! I haven’t tried granite yet. I have done slate with great results. I’ll add granite to my “to try” list. I’ll use a granite sample in an upcoming review.
@casper1240 Жыл бұрын
I just loosen the Knurled Knob in the middle of the module to adjust the height
@clickster1883 Жыл бұрын
Alright, alright, alright, good review!
@cathyjohnson6172 жыл бұрын
I just bought one
@Neo7CNC2 жыл бұрын
Have fun with it!
@paulcollingham95912 жыл бұрын
Good video may friend, very helpful..thx
@Neo7CNC2 жыл бұрын
Glad it was helpful! Thanks for watching
@ComgrowOfficial2 жыл бұрын
Great video, bro!!!
@RoySATX3 жыл бұрын
10:10 The two things you said you'd like to see improved, a power switch and easier laser positioning, have both been addressed with the M40 model.
@RRINTHESHOP3 жыл бұрын
Nice review David.
@Neo7CNC3 жыл бұрын
Thanks Randy!
@giannisgiannis43863 жыл бұрын
nice presentation, thank you. Can you let me know if this can be used to cut stencils? I think the plastic is about 0.3mm
@Neo7CNC2 жыл бұрын
It would depend on the type of plastic. I have great success making craft paper (cardstock) stencils. What type of plastic are you wanting to use? Can you send me a link to it?
@giannisgiannis43862 жыл бұрын
@@Neo7CNC i was thinking of vinyl
@profishingwithcarter8481 Жыл бұрын
Do you happen to have a parts list for the ventilation?
@Neo7CNC Жыл бұрын
Hi, I have links to the parts I used down in the description of the video. Thanks for watching!
@chappyaugusto2 жыл бұрын
very explicit, that makes a difference.
@rafaelgonzalez79812 жыл бұрын
TOMTOP is selling this product in 69% discount.Around 200% if anyone is interested. I bought one just to learn to engrave with it. Im new to this and wanna learn as much as I can. I started playing around with resin printers last years and now i want to learn other stuff.
@spookykek81023 жыл бұрын
Hello, I'm new to engraving, so excuse me if this is an obvious question, but what is the thickest material I can cut through?, or can I just have it loop around the shape a few times to get through?
@wildharvesthoney3 жыл бұрын
Thank you for the video. Would this machine engrave on stone for garden decor?
@Neo7CNC2 жыл бұрын
I don't believe so. You'd need something more powerful.
@timmyferrell83853 жыл бұрын
thanks for the great video... got one on the way
@raffez22703 жыл бұрын
i would love to see this verses a SCULPFUN S6 Pro 40W
@MuathAbdullah13 жыл бұрын
What about the time needed to engraving metal or wood.. Is it taking long time??
@09Hayabusa3 жыл бұрын
Any videos on stainless steel? Have you tried it with metal?
@Neo7CNC2 жыл бұрын
Hi Russell. I've tried stainless with two different LED based desktop lasers now and the result were the same. These types of machines can only anneal the stainless (put heat into it) which causes a color change. I did a deep dive on the subject in a video several weeks back and also touch on it in my latest video that came out today. Check those out and see if it helps. Thanks for the question.
@09Hayabusa2 жыл бұрын
@@Neo7CNC thanks
@madbroindustries Жыл бұрын
I can't seem to get mine to engrave. I set the settings up etc but no luck.
@spencercraig560 Жыл бұрын
Odd question I can’t seem to find the answer. How far do I keep the engraver head From material I’m working with?
@Tomohawk19552 жыл бұрын
Does the surface need to be flat? Curious if it could be used for axe heads?
@Neo7CNC2 жыл бұрын
You want the surface to be as flat as possible to the laser. Any deviation with bring the laser beam out of focus and that will cause your image quality to suffer.
@brk12683 жыл бұрын
Thanks for the video. I want to laser cut 1000 denier Cordura fabric. Can A5 Pro cut this kind of fabrics easily?
@Neo7CNC3 жыл бұрын
I'd be happy to test it if you want to send me a sample of the material.
@ToniaTuck Жыл бұрын
i have the A5 Pro, and Lightburn... is there a way to tell the laser fan to turn off when not printing? mine is on all the time, as long as the unit is turned on.
@stevechang66772 жыл бұрын
Why dont you have a front hinged acrylic door on the enclosure.
@Neo7CNC2 жыл бұрын
Mainly to allow air in the front so the exhaust pulls better.
@adelefletcher25752 жыл бұрын
Would I be able to laser on slate tiles with this machine?
@Neo7CNC2 жыл бұрын
I just tested some slate coasters and I was able to mark it. It leave a light grey color.
@alakaolushola55563 жыл бұрын
Thanks so much for this video please am new to laser machine Can I use another software apart from lightburn software? And can it engrave rug Thanks for your help
@Neo7CNC3 жыл бұрын
LaserGRBL is another software you can use.
@dougtaylor77242 жыл бұрын
Can you engrave lettering on a painted panel of aluminum or steel?
@Neo7CNC2 жыл бұрын
I've tried with black painted aluminum and the results weren't great. The readability just wasn't there. So far, anodized aluminum and thinner stainless steel yields the best marks in my testing. Thanks for watching and commenting!
@monicab2810 ай бұрын
Where did you get the spacer card?
@Neo7CNC10 ай бұрын
It came with the laser. Thankfully they are included with most lasers that focus this way.
@RastaOnABike Жыл бұрын
love it. greart video I just made a video about my poor mans version, the 20w atomstack.
@monicab2810 ай бұрын
Is an air assist the same as the exhaust?
@Neo7CNC10 ай бұрын
It is not. Tha air assist is blowing air from around the nozzle. This helps minimize over burn and also helps the laser cut better by pushing the smoke out of the way of the beam. Thanks for your question.
@pactdonkey2 жыл бұрын
Have you tried it on anodised aluminium?
@Neo7CNC2 жыл бұрын
Yes. it works great! Thanks for watching!
@dsuryonoap40662 жыл бұрын
Could you tell me please the size of aluminium profile on X Axis & Y Axis? is it 20x20 mm or 40x40 mm? Big thanks...
@Neo7CNC2 жыл бұрын
The smaller pieces for the two sides (y axis) and the cross piece (x axis) are 20x20mm. The larger front and back pieces are 20x40mm. Thanks for your question.
@MCEngineeringInc3 жыл бұрын
Cool!
@komchand93133 жыл бұрын
Hi I'm using atomstack a5pro for lightburn software for cutting 4mm plywood not able to cut. Need your help to do the setting
@Neo7CNC3 жыл бұрын
What are your power, passes and speed set to in lightburn?
@simoneyeomans55132 жыл бұрын
Can anyone send a link for the user guide he found please? I can only find copies of the building one I already have!
@Neo7CNC2 жыл бұрын
I looked back in my files and I had it saved. I've uploaded it to the Neo7CNC website. Look at the post for the A5 Pro review and the link is at the bottom of the summary. Hope this helps and thanks for watching.
@TheBastion873 жыл бұрын
is the software easy to use? or is kind of cnc g code programing?
@Neo7CNC3 жыл бұрын
LaserGRBL (free) and Lightburn ($40usd) are both fairly intuitive. For just engraving basic pictures LaserGRBL was fine. If you want to create custom engravings on the fly then I'd use Lightburn. I used Lightburn to do actual cuts as well.
@huntertreece49253 жыл бұрын
I have a a5 pro as shown. For some reason lightburn is not wanting to read the parameters of the machine and the communication from the program to the laser doesn't line up. (Top left positioning will burn in the middle of the laser frame). Any tips?
@maxtimmerman3 жыл бұрын
@@huntertreece4925 i had the same problem.Now a im using LaserGRBL
@Tman943 жыл бұрын
What is the link to find the manual?
@prismaartelaser69373 жыл бұрын
Helo! Can this machine engrave and cut in golden acrylic?
@Ed196012 жыл бұрын
i recent boughtnit, Italië nog has an on/off switch
@julionovaretti2 жыл бұрын
Hello, sorry for the question... Is it possible to cut colorless (transparent) acrylic? I only see cuts with black acrylic... Is the quality good if possible?
@Neo7CNC2 жыл бұрын
Based on my tests, I'd say no. I've only been able to cut dark (black) acrylic.
@julionovaretti2 жыл бұрын
@@Neo7CNC Thanks for the answer! In this case only the CO2 equipment, correct?
@louiealfonso15073 жыл бұрын
Is this machine can engrave a photo on a clear acrylic? Please answer my question 🥺
@robcrawford66033 жыл бұрын
Yes it can
@shayagrunfeld18352 жыл бұрын
How does it compare the X7 Pro?
@Neo7CNC2 жыл бұрын
I recently reviewed the X7 Pro. Check that video out and thanks for watching and commenting.
@maxtimmerman3 жыл бұрын
what is the difference between the a5 and the a5 pro?
@Neo7CNC3 жыл бұрын
The A5 Pro has a slightly more powerful laser at 5.3 watts. The total power rating on the A5 is rated 20 watts where the total power rating for the A5 Pro is 40 watts. Those are the biggest differences I can find.
@laurenwillis22012 жыл бұрын
Can anyone tell me what size the y axis timing belts are? I need to replace them on my atomstack a5 pro but can’t find the specs anywhere on what to actually order
@bcbloc023 жыл бұрын
you can probably cut leather too. Might as well go ahead and blank out some boots for yourself! 😄
@dailyshop46343 жыл бұрын
What you recommend me to buy "NEJE MASTER 30 WAT" OR ATOMSTACK A5 PRO 40......
@Neo7CNC3 жыл бұрын
I don't have any hands on experience with the Neje so I cant say which is better.
@hamizanhasan36253 жыл бұрын
Hi..it is true that this A5 pro can cut wood 12mm easily? I got the info from seller
@Neo7CNC3 жыл бұрын
I haven't tried anything that thick. I believe you'd need some type of air assist to accomplish that if it's possible
@diydeco27743 жыл бұрын
This machine cutting the aluminium ? Or aluco ?
@Neo7CNC3 жыл бұрын
It won't cut aluminum but it will mark anodized or painted aluminum.
@LanceMcGrew3 жыл бұрын
Looking for a KZbin video showing this machine in action.