Chrysler 300 no crank no start fix

[@carlostorres8752]

Great video, thanks for putting it up, it helped me a ton. 06 Chrysler 300c 199,878. My wife says buy a new car, but the 300 has never let me down. So I'm representing till then.

[@jrjuarez2829]

Had my 300 for 5 years never failed me only water pump once nd saw first video💯🙏🙏thank u so much for everything got to fix asap

[@nestorautorepair]

You're more than welcome , thanks for your feedback

[@lou55b]

Hi Nestor the banging dash with key in worked on my 2007 300c am still smiling thank you so much for sharing your knowledge bless you

[@nestorautorepair]

You're welcome boss thanks for taking the time for the feedback

[@lifeessentials9637]

So glad I saw your video mine is 200 more difficult to access the cylinder assembly had to cut through the plastic to remove the lock cylinder that got stuck. Thanks for a clear close up of each parts & how to do it and change the defective part!

[@nestorautorepair]

You're welcome boss thanks for your feedback

[@iamvibecraft]

Great videos bro!! Very detailed. Great explanations. Well done!! Helped me figure out how to fix my 300 and your other video helped me figure out how to start it until I get the parts and can replace the ignition switch. Thank you!! 💯🙌

[@nestorautorepair]

You're welcome boss thank you for taking the time to give me a feedback 🙏

[@donniesmith967]

What exactly is this procedure for a no crank no start?

[@clarencemorse8430]

Man oh man, saw the first video, then you came back with the fix!, Fantastic!! Thanks

[@nestorautorepair]

Thanks boss yes

[@tresemundo]

Great job and excellent explanation! It’s been driving me nuts trying to fix the problem. Almost ready to buy new key fobs and have reprogrammed. Thanks to your 2 videos I’m definitely gonna save money and can fix myself. Thanks bro well done 🙏🏼 and I’ll definitely share this to others that have same issues

[@nestorautorepair]

Thanks boss

[@jcgizzle]

I'm glad I found your video... was just about to buy a new starter for my 2006! After I saw your other video where you hit the dash to start it, I'm keeping the original starter... just replacing the broken piece. Thanks!!

[@nestorautorepair]

You're welcome sir , thanks for your feedback

[@justinbowman3711]

What's the broken piece?

[@nestorautorepair]

I believe I show it on the video

[@ggbbb1280]

Great video. First off God bless you brother. My niece has a 2005 Chrysler 300 3.5l that shuts off randomly. Could be a pit stop at store and car won't start or crank. Also car would just quit on roadwhile driving. No engine lights on when this happens. I checked the starter relay, seems good. Starter works fine. Tried bypassing the starter relay but car just cranks but won't fire. The fuel pump does sound like it builds up but doesn't fire. So when car acts up, it doest start through bypassing relay but when car starts, it seems to run perfectly

[@nestorautorepair]

Thanks boss 🙏 sounds like crank sensor and fuel pump , you are having two problems , when the fuel pump heats up it stops sending gas

[@ggbbb1280]

When the car wont start the dash and radio seems to work fine. Everything looks good Just no crank when turning key

[@walterjohnson7455]

Great job really helped me out.Thanks , bro

[@walterjohnson7455]

Great job really helped me out.Thanks bro

[@tresemundo]

My next project! Thank you so much for the video 🍻🍻🍻

[@nestorautorepair]

You're welcome

[@thrashingmetal]

Good work, you can save time just remove those 3 screws he showed, push the assembly back wiggle it out by hand.

[@israelrubio7728]

What is that part called?

[@Saul-ps9fu]

Hi Nestor i have a cuestion. my daughter have a dodge charger 20 11 after overheating the car wont turn on, i rotate the crank shaft manually and it turn complete but is hard to rotate it,whe i try to start the car with the fob key it make a noise coming from the starter i replaced the starter but the car still the same.what do you recommend bro? Thanks in advance.

[@nestorautorepair]

Sounds like coolant got in the piston and now the engine can't compress it , remove the spark plugs and confirm it

[@ellogovernor12345]

Great video by the way and very detailed.

[@nestorautorepair]

Thanks for your feedback Angela

[@ellogovernor12345]

Huh, ok, thank you!

[@nestorautorepair]

You welcome Angela

[@gilbertomorales4736]

Great video very helpful thanks! Blesdings

[@nestorautorepair]

you're welcome , thanks for your feedback

[@trentrose9408]

Perhaps you can tell me why my remote start dosnt work after replacing this!?

[@nestorautorepair]

Mmm check all your connection

[@matthewfields793]

Working on a 2006 Chrysler 300.. jo start from they key. I can jump relay and it turns s over. No spark nor does the fuel pump kick on.. also the lightning bolt is flashing.. could this issue cause those as well??

[@nestorautorepair]

Sound more like bcm

[@malakehlayjhiowfromthatiss7913]

Hay is their a special switch to start car if youlost key fob to a 2019 Chrysler 300

[@kendrickcontent]

I replaced both and still no crank no start. I even tried the starter relay hack 30 n 87 still nothing my last guess my solenoid gone bad. All fuses and relays are good.

[@nestorautorepair]

Does the inition turn ON?

[@kendrickcontent]

@@nestorautorepair yes

[@2321Chargers]

HMMMM

[@thrashingmetal]

any update? ground wire?

[@kendrickcontent]

@@thrashingmetal bad starter

[@mini-smalls7081]

You never said what the name of this part is....is this part of the ignition system? Did this 300 have ignition issues?

[@nestorautorepair]

Yes igntion switch , I believe I show the part I replace

[@miguela.rangeljr5871]

Im looking at one thats a 5.7 guy told me it shut off while idling. Said he turned it on it shaked then shut-off again he's giving me a deal but id want to make that deal worth it by knowing what to do.

[@nestorautorepair]

Oh ok well good luck boss

[@qballer2405]

Hey mine's doing the same exact thing no crank no start do you live nearby

[@nestorautorepair]

I’m in sterling va google Nestor auto repair

[@cartelsosa6574]

Does the same parts work for the 300c ? Hemi ?

[@bbnowens]

Hi, my friend has an Chrysler 300 She can not find key ignition for her car. How can we find this part? Please help

[@gabrielg8918]

Hey is they any way I can get in contact with you ? Wanna see if you still able to put the lower springs on

[@nestorautorepair]

Yes sure

[@daronmccartney1733]

I replaced both of them parts and still doing the same thing I tried jumping the starter still nothing and we turned the moter so we know it’s not locked only thing left to replace starter it’s not clicking or nun

[@davidessien5465]

What causes no crank no start in a 2005 chrysler 300 after a TIPM service

[@keionawoods1767]

I have a 2006 Chrysler 300 c hemi and my car started up and then just cut off all lights work even the horn, the fuel pump is engaging but the car doesn't make a single noise when I got to start it. Could this be my problem? I tried the relay switch I also switched it with the horn fuse and it still didn't start. I even took out the #5 and #29 fuse out my trunk fuse box for my anti theft and my car still is not starting . Any Other Suggestion?

[@nestorautorepair]

Have you seen my video before this fix how I was able to start the car , I believe the link is below this video

[@keionawoods1767]

Thank you! It’s fixed it was actually my starter wire it came out. Just needed to be clipped back together. It started right up.

[@nestorautorepair]

Nice!!

[@nicolebeverly2]

I have a 2010 and it power is on not turning over though, can’t figure out what fuse 33 is in the trunk fuse box, do you happen to know

[@nestorautorepair]

No I don't know about that fuse , well try to jump the starter from under the car

[@dsablk1]

what is the name of the 2 parts you replaced?

[@nestorautorepair]

At the end I only replace one

[@ellogovernor12345]

Hi, so we have a 2005 Subaru Outback 3.0 that is doing the same thing now after changing the fuel pump, alternator and starter and still no crank or start but I get all the lights in the dash when I turn the key on. Do you think it may be the starter switch and relay? I have not pulled it apart yet and just got a relay tester. Thanks

[@nestorautorepair]

Hi do this get a 19mm socket and try to rotate the engine to make sure the engine is not lock up , also you can put the key ON and touch the small cable to the big cable at the starter and see if it crank , here is a link of this car how I got it to start before fixing it kzbin.info/www/bejne/sJiqgqB9oLd4r5Y

[@ellogovernor12345]

@@nestorautorepair ok, thank you, I will let you know what happens. Both our vehicles went down at the same time. Uuuuggg🙄

[@nestorautorepair]

Wow ok best luck

[@ace716_westside]

new starter in, it clicks but no start, can this be a cause of click no crank?

[@nestorautorepair]

Yes sir

[@nestorautorepair]

Have you try to rotate the engine by hand ? Make sure the engine is not lock up

[@ace716_westside]

@@nestorautorepair yes the engine is free I put marvel mystery oil in each cylinder let it sit for a little bit then turned the engine by hand and did an oil change

[@nestorautorepair]

Ok check your starter relay , but I think just take the key switch apart and see inside if the little leg inside is broker

[@ace716_westside]

@@nestorautorepair ok im going to try that, thanks

[@davidt5051]

I have a 2006 300 it would start with key but die out. I had a aftermarket remote start put in it professionally. If I started it with the remote start it would run fine. I took the remote start out thinking maybe it was causing a problem. Now the car won’t turn over at all. Key fob still unlocks locks panic pops trunk but dash lights up the security light flash’s and the lighting bolt light comes on and won’t crank over. Had a lock smith out today to trying reprogram the key and cut me a new one nether worked. And I scanned it and I have a code for invalid key skim code I’m lost here can’t wrap my head around any help would be greatly appreciated

[@nestorautorepair]

Yes hello was the system only remote start or a two way alarm as well ,?

[@davidt5051]

@@nestorautorepair it was a alarm and remote start

[@nestorautorepair]

Ok got it so when you remove the alarm there is a wired by the steering column that was original cut so you need to connect this withe back make sure is the same color on both ends,, if you just unplug the alarm or just remove the fuse , the car will not start untill you reconnect the wire that was cut

[@danellison1555]

Can you help me? I have a 2017 Chrysler 300. The push start only stays in off mode no matter what. No crank no start.

[@nestorautorepair]

Make sure you have good battery charge , also is the remote battery any good?

[@danellison1555]

@@nestorautorepair yes and yes. I’ve replaced bcm, starter, hsm, esm, all oils and fluids and filters, starters, battery, all fuses and relays, pcm etc and still nothing.

[@joshuashowalter8024]

Did you fix?

[@nestorautorepair]

Yes

[@kingchris447]

@@danellison1555 hey bro what was your problem I really need help I have p1df3 code idk if I need a battery charge it starts right up with a jump no problem

[@tonyverhelst3679]

Thx man

[@nestorautorepair]

Your welcome boss

[@jakotanjie6902]

Heyy I need some help with my Chrysler 300M it would not start but the battery is new

[@nestorautorepair]

Is the engine turning over ?

[@teejay1255]

Where are you located

[@nestorautorepair]

Sterling va g.co/kgs/mmaibN

[@raymondflores951ie]

Screw in the top right just change my out

[@nestorautorepair]

Good!!!

[@danellison1555]

My 2017 Chrysler 300 push start only stays in off mode. No acc or start :(

[@nestorautorepair]

Wow that's suck

[@ronaldstryczek7842]

2008 challenger won’t start will not turn over

[@nestorautorepair]

Try hiting the starter , or check if the starter is getting power

[@XOZEE-kn5cz]

I have a 2018 Chrysler 300 it won’t crank or start. I replaced the motor of the windshield , disconnected the battery for that and once I put everything back in place my car doesn’t want to turn on . But the lights do

[@nestorautorepair]

So the car was good untill you work on it replacing the wiper motor ?

[@kingchris447]

@@nestorautorepair hey I disconnected my battery on my 2017 Chrysler 300and it didn’t start when I went to go start it again

[@jordanmourning4733]

I just put a brand new battery in my 2007 dodge charger now it doesn’t even wanna crank please help I’ve tried everything

[@b732jersey8]

Fuse box

[@abelsalgado5702]

Buddy mine doesn’t look like that

[@ackvig]

Minute 4:56!

[@TheTommy83180]

Like

[@ronaldstryczek7842]

2008 challenger

[@nestorautorepair]

Ok

[@BruceWayne-ue5dj]

I got an emergency question. I’m having the same problem with the no crank no start

[@nestorautorepair]

What car ?

[@BruceWayne-ue5dj]

@@nestorautorepair 2007 Chrysler 300, I was able to start it using the paper clip trick, but i wasn’t able to turn it off with my key. I had to pull out a fuse to turn it off.

[@nestorautorepair]

Sound like your key cylinder is broken inside just like this one

[@BruceWayne-ue5dj]

@@nestorautorepair is it possible for me to fix it myself if I can buy the parts? I’m not a simp, I’m a fast learner. And KZbin is a good platform to “do it myself”

[@BruceWayne-ue5dj]

@@nestorautorepair it’s just that I called some auto shops and they said it’s something that needs to be taken to the dealer. I’m pretty sure there’s a way to do it myself without having to depend on a stupid dealer.

[@dudet9662]

are all the comments bots? copy paste responses are lame AF 👎🏻👎🏻

[@coreyreese6027]

Oio

[@nestorautorepair]

Ok