NEW 6.7 Powerstroke FULL INTERCOOLER PIPING - Best In The Business!!

GET THIS KIT HERE:
bit.ly/Piping_Kit
POWERSTROKE STAGE TWO KITS HERE: bit.ly/stage_t...
POWERSTROKE STAGE ONE: bit.ly/STAGE_1
Check out this new intercooler piping kit for the 2015 and up 6.7 Powerstrokes, this is a prototype kit and the production kit will be launching soon!
Best looking and performing kit in the business
GET YOUR POWERSTROKE PARTS HERE:
bit.ly/606whp
Follow my instagram:
bit.ly/COREYIN...
The Best Foam Canon
amzn.to/333Drkd
Pressure Washer
amzn.to/2xGl6xW
Iron Remover
amzn.to/2R6g58D
My soap
[TOP SECRET] for now
Clay Bar I use
amzn.to/2R7lZ9D
toyota
cars
JDM
Supra
2020 supra
mkv
a90
b58
ford superduty
f250
diesel trucks
moderndieselcorey
Corey vlogs
diy install
6.7 powerstroke
diesel straight pipe
lifted trucks

[@Bowhunter5]

Put this kit on my 2019 6.7 this weekend with the coolant reroute kit. I FREAKN LOVE IT! The reroute kit cleaned up the lines running throught tthe middle of the engine bay. Fit like a dam glove!!

[@ryanbrown918]

About time!!! I've been waiting for this for so long!

[@six0bros]

I definitely want to do this to mine down the road. After I finish some tuning test with factory setups for videos. I then plan a kit like this.

[@TyFenwick]

Where does the stock manifold sensor get relocated to ?

[@brianthompson7987]

Send one to Az ,so I can test it in 110 + degrees. That is so awesome.

[@jameszuhlke2448]

Is this egr deleted?

[@dmaxxcot]

Y-Bridge 😂👍🏻👍🏻 love the build brother

[@johnmcleod5281]

Man I can’t wait to get this for my 16 6.7. Just ordered the Emperor kit yesterday to upgrade my Turbo!

[@freedomsrt8]

Love to here what you think of the turbo kit

[@johnmcleod5281]

Freedom five will let you know.

[@shanetaylor7581]

Just commenting so I can get an update also.

[@willm3742]

How did it turn out ? I’m going to get the kit maybe for my 2016 what turbo did u go w in that kit

[@alexisenrique794]

How does SPE's piping kit compare to MPD's and Pusher's kit? Does SPE's have more flow? I've been patiently waiting for SPE to come out with this for my 2019. All their other products kick ass hoping they can do the same with this kit.

[@nickhartung7734]

Looks great. I love the fact you can keep your previous intake. Can't wait to see the powdercoated ones.

[@bobjohnson9670]

Full pipe kits have been out for years MPD full piping kit runs up to 17+ trucks I run one with a budget turbo kit on a 14 F350.

[@fc4305]

I got impatient waiting on SPE and got the No Limit kit and its pretty bad ass. I ordered the 11-16 kit as I previously moved the battery back when I had the s&b. My truck is a 17. I like SPE and buy some of their stuff as well and plan on doing more too

[@marcom8166]

Did it work with the s@b filter or u used the filter from kit

[@fc4305]

@@marcom8166 I had to use the filter from the kit and remove the box leaving the battery tray, the no limit filter is a larger diameter as the piping is much bigger then the s&b as well. The s&b filter will not fit the no limit pipe.

[@swampdaddy3707]

When can I get this for my 21 power stroke?

[@kyleprichard9872]

That intake manifold would look really good with the sinister diesel blue

[@parales03]

2 years later and it’s still prototype. I like the this color better. Did you tune your truck? What happened to the throttle sensor?

[@TopCorey]

your gosh damn right

[@BLACKCLOUDFORD]

Hairspray for the boots. Goes on wet, dries sticky !

[@sethalton205]

So they have a kit for the 2011-2014 turbos... SUPER interested in this kit :D

[@ZionRanch]

You will never get it.

[@nathanmettenburg2023]

Big peace of metal. That sounds like a good name.

[@lineman5349]

Im ready for it!! Hope the fitment is perfect for the emperor kit as well i have on my truck!

[@keithjohnson900]

How come I cannot find that intake on their website are they not selling it anymore?

[@tater0909]

Man I sold my 2019 dually. Had everything SPE. I’d love to have another. And do everything SPE again. Including that and turbo. Awesome trucks

[@stefanreischach5998]

Do you have to retune after taking off the the stock intake?

[@FlagFootballRankings]

So I just got my first diesel and it's a 2017 ford f250 Platinum. I'm stoked but I want to do some mods to it. With the intercooler piping kit do you have to tune the truck with this mod? Let me know.

[@monsterram6617]

Time to do some 0-60 and 1/4 mile runs in this beast!

[@randypowell9991]

Does this kit come with the ccv plate and hose? And/or cheese grader piece? Or are you telling customer they have to delete that on there own?

[@itsbreezzy1872]

Can you make a video of Powerstroke Oil and Transmission Fluid going 200+ especially when towing what to do to lower the levels and talk to us why only powerstrokes run hot

[@traxxi2003]

Corey sorry for the dumb question but this is only aplicable if the truck is deleted?

[@oliverguyton6531]

You are using the stock turbo?

[@chadmeier1815]

who did your tuning for this setup, have same exact setup on 2013 with stock turbo and need tune for it.

[@sugmashowdown]

Are you going to run the 370 ball bearing on stock fuel at first? I'm curious to see how it spools before you upgrade the cp4!

[@sugmashowdown]

The coolant reroute that pusher intakes sells works really well and looks clean. I run SPE tunes but a smeding piping kit and I can say on my truck it seems like the hot and cold pipes are just a tad longer than they should be. Or my intercooler seems closer to the turbo I'm not sure.

[@anthonyjohnson2316]

Need this kit. I can’t find one that supports using the S&B intake. They want to use their own intake and filter.

[@AlexPiazza28]

How does his stock turbo sound like that

[@miguelangelsantana4030]

That’s a factory turbo?

[@kylebrenay174]

Love it, really looking forward to what SPE is going to do for the 2020 Powerstrokes! Tuning and all...

[@andrewenjaian3231]

I've been waiting over a year for my order to come in.

[@daiglesrd]

Looks amazing cannot wait to get the one I ordered March 29. Apparently had some quality control issues with first batch (per email from SPE), but now getting a few in at a time. Will let you know when received and results!

[@TopCorey]

👍👍

[@ZionRanch]

Thats what they have been telling me for months. Did you ever get yours?

[@daiglesrd]

@@ZionRanch no I finally canceled order. Too bad it looks like a great system just can’t deliver.

[@ZionRanch]

@@daiglesrd I wish they would just be honest instead of missing every promised deadline.

[@bradleybrown2417]

Did you remove the turbo silencer ring?

[@TraumaticSounds]

Which brand EGR D3l3t3 kit is that?

[@dcheynerl]

When can I buy these!!!!!!

[@WildTines]

Question, do I need to be tuned and lose the EGR for this?

[@Robert-rg6iq]

Since you would be removing the stock lower intake, which contains the throttle body butterfly valve, I would assume as much. The throttle body works in conjunction with the egr where the butterfly valve restricts fresh air flow into the engine while the egr valve is open (during regen I believe). This encourages the engine to use more EGR air as opposed to fresh air. Therefore, no more egr means no more need to restrict fresh air. Moreover, when doing EGR delete, it's common to unplug the throttle position sensor (TPS) because there is no need for the butterfly valve. There are a few forums in regards to this matter. Hopefully this helps.

[@BigPowerstrokeguy]

Yes

[@chazhonaker2754]

A little late now, lol but you can run to the dollar store and grab some cheap hair spray and put on your intercooler piping boots. They will about never blow off again.

[@bryantrubio4751]

Would I have to delete my truck if I just wanna upgrade all my intercooler piping?

[@dispensary21]

no. pusher intakes

[@williamsantiago7303]

Let me ask a stupid question, are these pipes POLISHED ALUMINUM or are they aluminum pipe that has been chromed plated? Keep up the good work with your videos dude, they're very informative. I gave this video a gigantic thumbs up. 👍

[@rdherndo0123]

does the kit have all the hook ups for the sensors or do I have to delete certain ones? I have a 2013 Ford f250 6.7 with a egr delete already and H&S programmer.

[@charleswilson4499]

Did you use the EGT sensor that was in the EGR pipe or did you use one from your DPF?

[@TopCorey]

either or

[@charleswilson4499]

@@TopCorey been waiting weeks on my intake piping and coolant reroute kit.

[@kwhopper5409]

I have a 2014 6.7 with the SOFT swith Can i get transmission turning for my year?

[@logancobb683]

Most tuning companies come with trans tunes

[@sugmashowdown]

If you run SPE tunes they're labeled if they change the trans tune or not

[@kwhopper5409]

Bought the truck deleted Dont know how to get a Technician all I can do is monitor my gages and clear any codes I might get Sorry learning

[@sugmashowdown]

@@kwhopper5409 if you have an ez lynk auto agent, you'll be able to find SPE tunes or whoever you want tunes from online and link with the VIN of your truck or your email; see if you can find a walk through of the whole process online💪

[@shanetaylor7581]

Eric Chavez click on “ technician “

[@bumgarner87]

What intake is that? When is your system going to be ready?

[@richard3438]

Great kit however, , , Seems like there are a couple janky issues with a real good fit in those couple places you mentioned. Would be nice to see it put together correctly. I'm sure those things would bother a lot of people.

[@hotshotcouple6747]

When will it be available

[@VitalityPBOwner]

So what about the throttle body?

[@bonoble001]

When is this going to be available I been looking at their website for this for the last 3 months

[@shanetaylor7581]

Is there a kit for the turbo with the oval top pipe?

[@billymann5325]

Nice!....sounds like my truck

[@emilymartin4679]

Ive installed this kit, my question is,is there anyway to get my turbo boost gauge to ever work again? Because it hasn't worked since i installed the kit

[@A-tx9rc]

Did you ever get your turbo gauge working? Interested in buying this kit, but not if that gauge will become broken

[@kevinmanzano1305]

Hi I need help with my truck I got 2011 Ford F-250 diesel with 6.7 i was getting misfire 2 and 6 injector but I replaced and still doing the same can you help me plz

[@ryantanaka1433]

Does this only work for deleted trucks?

[@jrod7309]

Following, I have the same question

[@01Gannicus]

You would need to have the EGR deleted. The EGR goes to the metal part of the factory intake he removed.

[@MrB11foxracing]

Is that ez Link code for proven tunes?

[@JH-un1vt]

Is this tuned or stock with the add on?

[@Teethhh]

What made you go with them over the full crusher kit ?

[@Teethhh]

* pusher LOL

[@lenvogel4395]

So… other than looks, what did this install do for your truck? What changes do you see?

[@joebrown3393]

Will this fit a 2020?

[@JH-un1vt]

Is this kit designed to run with stock turbo the mpd isn't?

[@jessestauber2201]

Is this going to use the current hot and cold side piping available from SPE? Or should I cancel my order for those and buy this in one package?

[@BigPowerstrokeguy]

Can you do this to a stock truck with no tuning ?

[@NicManGun]

Roughly how much HP did this piping kit add?

[@dcheynerl]

Where do I get this kit, it’s not on the website

[@jaimiewilson863]

Where can I buy this kit?

[@charlesbray3118]

So I just bought a 2014 f350 fully deleted love the turbo sound but what it the bark noise they call it when you let off the pedal?

[@bigbodybattalion1524]

Turbo lag

[@shanetaylor7581]

Charles Bray whistle or the whoosh

[@charlesbray3118]

@@shanetaylor7581 whoosh

[@shanetaylor7581]

Charles Bray yep. Love it. I guess if you put a manual switch on the jake brake it will whistle more/longer. But not sure how it’s done yet.

[@shanetaylor7581]

Charles Bray I have the 12 f-450 fatbutt.

[@billymann5325]

Have you noticed a difference after now after this current mod with your SPE CCV reroute?...Mine seems to puff during idle a little bit...Maybe this is haze?...No oil drip though so that's good.

[@crobscam2806]

Ordered a intake n havent received any confirmation.. goin on 2 wks. Cmon brahh...

[@ZionRanch]

Did you ever get it?

[@jaimiewilson863]

Where can I buy this?

[@alex_5.sl0]

Update on the piping ???

[@ErickGarcia-bn5lp]

Did you get turbo whistle with this kit or did you already have it with the air intake?

[@sugmashowdown]

He had the silencer ring machined out of his factory compressor housing when he had it built. But if you have an aftermarket charger, you will hear it spool with any piping kit or intake tbh.

[@greggorysr1541]

Why are u running 2 alternators ??

[@336offroad]

Subscribed

[@billymorales4382]

I need mine asap 🤘🏼🤘🏼

[@OscarStephanie-t3j]

59573 Fritsch Extensions

[@---vj5fx]

So eager to get mine. Looks clean and definitely improves flow.

[@ZionRanch]

Did you get it?

[@---vj5fx]

Not yet. Had been working on moving and renovating a house. But soon!

[@spencershippy3743]

Put me down for one please 🤩🤩

[@USMC142]

Pretty sweet looking setup.. Question: how did you eliminate the throttle body assembly that attaches to the lower intake manifold?

[@spartanoverlanding300]

Wondering the same thing myself. Seen a couple of kits with this style set up and they seem to be (off-road use only) they don’t comply to emission standards

[@Jaybird9005]

What's the reason for installing this kit? What does it do for the truck?

[@TopCorey]

cosmetic power 💪

[@Jaybird9005]

Oh okay! That is a good reason!!! Now if I can just convince my wife. Lol

[@emilymartin4679]

​@@TopCorey I installed this kit ,and ever since I installed it my turbo boost gauge hasn't worked since, is there anyway I can get it back to working?

[@renj6531]

6:07 Im weary of Plastic radiators but a thermostat Housing right out of the engine especially considering diesels run hotter than gas engines is even worse.

[@robertnightster]

Nice sounds bad ass

[@islanderson691]

Looks good can't wait till I do mine, now you need a coolant reroute kit. I also did the low temp high flow thermostat.

[@bullboss7698]

How do you pass Pa. state inspection after you deleted ? Do you know someone who will just throw a sticker on for you or what ?

[@enriquetrevino7815]

LOL

[@jrod7309]

Are you Corey Willis?

[@bigbodybattalion1524]

Anyone know any 2020 powerstroke deletes out there yet?

[@WaterandWoodsmen]

How do I get an application for employment dream job !!!!!

[@stevenfarmer6202]

Nice!

[@charleswilson4499]

Is this kit available yet?

[@ZionRanch]

Nope, been waiting months.

[@charleswilson4499]

@@ZionRanch damn it

[@shanetaylor7581]

Sweet

[@connorlacourse2881]

Use windex

[@dr.bowdoin3067]

MPD piping kit looks better

[@almedin7212]

Jesus dude, watching these powerstrokes and duramax engines makes me happy i got a cummins.

[@brandonstill7229]

Sent this email to SPE -- Hello, I’m looking for a tune on my 2020 F250, 6.7. As of right now it’s all stock. Do you guys offer a tune for the 2020 ? If so, what kind of gains will I be seeing. ( ball park ) thanks so much for the info. Robert in FL. -- The response I received “ I don't, sorry. “ -- Guess they are not developing anything for the 2020, 6.7 I wasn’t expecting that response

[@abramspearman9046]

I think they have encrypted ecm’s.

[@Jim-rd3yx]

@@abramspearman9046 Nope already been cracked.

[@abramspearman9046]

Warpath ah, that’s good to hear that gm is the only one so far.

[@jameslowry17]

What happen to your Instagram?

[@austint3598]

It’s an intake manifold

[@harrisonbored1]

So it’s been a year

[@mannymarquez4891]

maybe idk Intake Y-Pipe...