New airbox from Allisport gives extra 38BHP to your Land Rover Defender Tdci Puma

[@TK-Touring]

I'll be adding this to the never-ending wish list on my Defender 😅

[@300bhpton]

A somewhat misleading video title and claim. It is NOT +38 PEAK bhp gains..... and the dyno chart shows over 140hp for the non modded one.....

[@HeliRy]

Yeah. Peak torque gains is maybe 7 lb/ft and peak horse power gain is about 12. Not bad number for anything you can bolt on in 30 minutes, but nowhere near the +38 in the title lol. Sure that power is there at the top end, but as he says… no one drives at the redline. And as you noted, they didn’t mention that this engine already has a tune or something else done to it. I couldn’t tell if that intercooler was stock or not 🤷‍♂️

[@ailo4x4]

Who would've thought you'd get almost 40hp from just changing the airbox?! I think that proves the factory engineers don't always do things because it's best, but because it works and it's cheaper. Well done!

[@jonnycsuperplumb765]

Well made and lovely bit of kit. Makes the LR part look terrible hey

[@joseoti1441]

Christmas is almost here. Is Allisport working on an airbox kit for a 300tdi? Would love to have.

[@leangrypoulet7523]

Now that is very, very interesting. Not quite as pretty as the Nugget Stuff version, but still a very well thought out piece of kit, especially that the filter is an off-the-shelf model and not some limited edition version that requires cleaning etc. Will certainly be looking at this. 🤘

[@erhardt1477]

Can THIS be fit onto a TD5 ..?🤔 Left hand drive of course 😂 Greetings from Germany everybody 👋

[@LRLiveUK]

They do another airbox for the Td5, yes

[@olifairhead3045]

Any idea on price ? See if Santa can be kind 😂

[@LRLiveUK]

Now online www.lrparts.net/as293-cylinder-air-filter-housing-with-wing-connection-kit-high-intake-connection-by-allisport.html

[@thomascatford2627]

38 bhp by changing air box ? Aye right 😂 😂

[@bealzibub4002]

38bhp my arse! Have allisport fixed their crap welds on intercooler yet?

[@heinzh5539]

Looks brilliant, well done guys. Will it work with aircon models? One of the A/C pipes runs right next to the stock airbox so it would be a tight fit?

[@samremfry3186]

Is this compatible with the 2.4 Puma engines?

[@Onkelwillys]

38 BHP ? 😂🤣😂🤣😂😂

[@HeliRy]

I’d be interested to see the version that attaches to the wingtip vent 😃

[@usmcn]

i need this!

[@Kastra707]

Are those 3D printed air ducts available for sale?

[@LRLiveUK]

Not yet I don't think.

[@alecjames1426]

Are the available for the td5

[@Thiswasmeanttobeeasy]

Your mention of Nugget Stuff made me look him up, and sad to see he has retired.

[@cgp888]

Can I add this airbox while still using the OEM snorkel?

[@b00130629]

Was that a gain in HP on stock engine, as I’m sure he mentioned the graph shown was a lightly modified engine.

[@LRLiveUK]

It was a standard engine with the centre box removed.

[@alexhogben]

38hp gain and £608 is just crazy

[@valdostube]

That engine looks completely different to my puma engine! What other mods were done on it?

[@deanmacarthur165]

So you're saying with this intake and a stage 1 on a 2.4tdci puma I'm looking at 190bhp. But a stage 3 on a puma is 177bhp???

[@chrisward8121]

Can’t find it on your website.

[@riccardopaleari]

I wish the plastic grill didn't have the Alive logo and looked as the stock one 👍

[@LRLiveUK]

You can fit any after maerket grill as the fixing holes are in the same place. Or modify a standard LR one.

[@gregwelby8577]

Exactly, this should be a stealth upgrade.

[@markriley2733]

I’d like one of these kits Be good to know cost of the air box and the extra hoses

[@LRLiveUK]

Prices now online www.lrparts.net/as293-cylinder-air-filter-housing-with-wing-connection-kit-high-intake-connection-by-allisport.html

[@NickQauterPounder]

​@LRLiveUK awesome bit of kit and great video, is it possible to fit this if there is a snorkel already in place or would the snorkel need to be removed and then refitted after the air box and pipework is swapped?

[@stephenferguson9405]

Hope you can buy the 3d printed wing intake separate….

[@chriswalker4272]

A huge improvement on the nasty standard setup that will be. Your air filter looks very similar in design to my 300 tdi which sits on the side and has a rubber with flat nipple at the bottom, tweaked it lets any dust build up out. I was surprised to see they have fitted what looks like a standard Transit-150 van air filter, which can not have as much surface area as your cylindrical type. Also on the 300 tdi there is a device to collect and get rid of any water that gets in. It's an interesting design, and may be of interest for you to incorporate in future 3D tweaks. I hope your units sell well being of the right stuff 👍

[@TheDefenderSisu]

Million dollar question, when are you going to start designing and selling parts for the new Defender?

[@ausdisco4]

Just found your channel and just Discovered ‘nugget stuff’ has closed its doors for retirement. Do you know any other options on how to seal a RAI from Terrafirma on a Disco 4 3L tdv6 ???

[@scaryfakevirus]

The Tdi filter box is a pig to fit over the bottom hose.

[@mr.fluffers9223]

Is the AS293 kit all I need, or do I have to order extras like pipes or fittings?

[@Simon-tg7jg]

Awesome bit of kit !

[@joseoti1441]

Christmas is almost here. Are they working on one for a 300tdi?

[@LRLiveUK]

Not sure, but they do a universal fit type that would work well.

[@robbie9655]

@@LRLiveUKwhere is the link to the one for a 2.4 puma with air con please

[@kallevespa]

Could not find it on the Allisport page?

[@LRLiveUK]

Now listed on our website. www.lrparts.net/as293-cylinder-air-filter-housing-with-wing-connection-kit-high-intake-connection-by-allisport.html

[@karlmaier343]

Doesn't this still have a water Drainage valve of some sort?

[@humourless682]

The alloy air box is far better than the OE one, but claims of 38bhp are ridiculous given that the very long intake hose connecting the air box to the actual intake, is going to reduce air flow significantly.....................

[@martinplewes]

The gain is made from replaceing the original restrictive pipe from the wing to the filter.

[@tomthompson7400]

looks well thought out ,,, do you do rustproofing too?

[@torashnal]

Thanks. - What air filter is used?

[@alchristie5112]

Is there a version for Discovery 4?

[@nnoddy8161]

Which Alisport airbox do you recommend for a BMW M57 conversion?

[@LRLiveUK]

I'll ask the question for you.

[@LRLiveUK]

They have produced one for N57, will need to possibly make a modification for the M57 Also working on another product with a flat filter that sits into the inner wing It may also be possible to pipe up the Tdci one, but you would need the Tdci mounts

[@richardthomas6890]

How much ?

[@Dutch58]

Follow the link in the description:-)