This video is an unboxing and review on the new Andis Premium guards and how they stack up against the Wahl Premium guards
Пікірлер: 124
@JMacGetFaded6 жыл бұрын
I've actually been using the original model of those clips for a long time. Like some people have commented below, it use to come with the Andis Masters. But I've been using them on an oster fast feed with the 913-53 blade since 2005/06. They are the best and only clips I use with an oster fast feed, and oster detachable blade 30, 40, and 50. I also use them on an a wahl magic clip, with a standard andis envy blade. For, some reason, on a cordless envy li, the original clips pulled with the standard blade that came with the machine. so i swapped magic clip blade to a cordless envy, and envy blade to magic clip. These new guides you have look perfect for what imm currently doing with the original model.
@mike23239094 жыл бұрын
GetFadedInc hey can I ask you a question?... what ceramic cutting blade do you use for you fast feeds?
@swizzlecuts50046 жыл бұрын
Best way to zero gap is to replace the cutting blade wit one from a #1 Oster detachable blade....fits perfect with no mods.
@robertwilliams78424 жыл бұрын
The long guard gives a nice comb over cut blend using clippers only!
@GKnightent5 жыл бұрын
The wahl distance from moving blade to top of the non moving blades is usually wider then andis. Andis and oster have a wider range so the #0 guard fully open lever can go close to a 1 or 1 and a quarter
@buckwitme16 жыл бұрын
yo these guards are dope to use with envy li cordless!!! i use them with the regular taper blade and i have another pair of envy li with fade blade! but these work best with taper blade imo because them blend together beautifully
@lew7083 жыл бұрын
The extended length and thickness of those guards makes a difference...It’s called “purchase”, where the guard grabs hair to be cut...You don’t want guards to be flexible or move..The stiffer they are and the better that they can “purchase” the hair, the least that you have to make passes over the same area, which is why detachable clipper blades has THE best ability to grab hair and cut...Those guards with the length and thickness looks to be great!
@TheDarrenWaffles7965 жыл бұрын
Andis always doing the things better
@macibasti3 жыл бұрын
So you recommend this guards instead of the double magnetic guards? I will use it for the same, for a oster topaz and a andis master. Also you can complete the guards if you have the double magnetic guards. 5 and 1.5 right.
@lezg50715 жыл бұрын
The fast feeds open up to a number 1.. Do you know how this affects the fade when using the andis guards on top .. is a open fast feed with a number 1 guard on really a closed number 2 and so on?
@ademzorlu47223 жыл бұрын
These are very good for normal cuts but however I feel the 0 dont connect well when fadeing
@georgekelly59875 жыл бұрын
Hey i got those andis purple ones and they keep sticking to my head. I accidently bought the wahl ones because I didn't check if they'd fit on my fast feed that are the rainbow addition or whatever and they don't stick. Are these like those? Or do they stick as well because of that sticky plastic guards..
@grgeorgiadis5 жыл бұрын
these guards are fit in the andis fade master blade? and in us pro li cordless?
@miguelsoriano48463 жыл бұрын
Aye bro do you think the zero guard is better than the new double magnetic ones that are trash?
@bean_dippp_1015 жыл бұрын
Thanks for this video. I think I made my decision and I'm going with these instead of the masters. I've cutting with seniors and have no complaints, but I wanna see what all the hype about the fast feeds is all about
@bthebarber9164 жыл бұрын
Which ones do u like better now
@lightshine60444 жыл бұрын
Andis premium guard fit Oster10 blade? In other words, does it fit Oster 76 Clipper blade?
@michealjackson82693 жыл бұрын
Are they brittle or flexible like the wahl guards
@HeavilyGamer4 жыл бұрын
This set fits on Wahl ?
@IsshmanGarcia5 жыл бұрын
FYI: You could always put ANY guard on a 000 detachable blade.
@matthewlara17543 жыл бұрын
Helpful!
@BBKPR6 жыл бұрын
Would these fit the envys?
@chr.sdavid3 жыл бұрын
if the #1 blends just like #1 double magnetic, then it shouldn't be an issue. coz #1 dm and #2 dm blends smoothly together without using a 1 1/2 guard
@juancordova83356 жыл бұрын
Those guards are actually the guards that used to come with the Andis Masters Black Edition back in the day with a new look to them
@victormaldonado55136 жыл бұрын
Juan Cordova exactly there the original black ones just updated
@victormaldonado55136 жыл бұрын
The black old school ones was there best guard they had for andis
@juancordova83356 жыл бұрын
Victor Maldonado the ones he is showing is the same one just with a slightly modified look
@juancordova83356 жыл бұрын
Victor Maldonado that's all these clipper companies are doing put a new look on a old product and say it's better or stronger like wahl does with the senior
@victormaldonado55136 жыл бұрын
Juan Cordova yup yes sir
@JMacGetFaded6 жыл бұрын
If you see some of my videos, I posted years ago, you can see the original model of these clips that I was talking about
@barbermack29804 жыл бұрын
I think I like this better than the magnetic ones 😎
@__dynamit36614 жыл бұрын
What are these guards called ?
@soulhs212 жыл бұрын
does anyone know if andis classic guards fit with oster 606 pro ???
@user-sn7ee4fk3g2 жыл бұрын
Thanks, the magnetic guards work great but, I don't like them they hook up to everything & anything that's metal so thank you.😊
@jaymell3405 жыл бұрын
Master® Magnetic Comb Set - Dual Pack 0.5 & 1.5 Look it up
@EricGibbsSr5 жыл бұрын
These still not available in 1.5 I need that asap
@eddie190119874 жыл бұрын
You don’t need when used with masters
@jeremiahcollins_5 жыл бұрын
Is it worth the upgrade? Coming from the purple double magnetics.
@MALTHEMASTERBARBER5 жыл бұрын
Jeremiah Collins It’s not an upgrade! They are the same black plastic guards that used to come with the Masters when Andis gave them to you! They just have that silver piece on the face! Save your money or get another set of purple magnetic guards or but the 1/2 and the 1 1/2 if you feel you need it another waste of money IMHO! It’s all marketing to sell uninformed barbers bullshit they don’t need!
@adensylas39432 жыл бұрын
instaBlaster.
@LiberatedMind12 жыл бұрын
@@MALTHEMASTERBARBER The purples are way worse, they have short teeth and are not as durable.
@brianmcreynolds24312 жыл бұрын
@@LiberatedMind1 yea the 0 guard purple ones have short teeth and that’s the reason why I’m here looking at this video lol
@LiberatedMind12 жыл бұрын
@@brianmcreynolds2431 Lol yeah. I bought these babies for my Oster, no regrets.
@jezebulls4 жыл бұрын
Why did Andis make these premium guards when their double magnetic guards are pretty premium as well? btw I know you got some ceramic blades for the fast feeds.
@miguelalvarado70804 жыл бұрын
I seen these guards the other day I was Interested thanx for sharing video!!
@joseramirez-cc1mz4 жыл бұрын
The best guards in the history of mankind is the double magnetic purple 1st editions. The 2nd best are the wahl premiums
@josh26764 жыл бұрын
First editions? So whats wrong with the second edition?
@smidc4 жыл бұрын
@@josh2676 A decent video on the differences here kzbin.info/www/bejne/f6bImYRqh694r6M Definitely check the comments, there are some good extras not mentioned in the video.
@ncmadafaka4 жыл бұрын
Those guards are unbeatable till this day!
@marcobarbertorres74863 жыл бұрын
@@josh2676 the 2nd editions 0 guard is HORRIBLE
@BlakeSuperior_Beats6 жыл бұрын
Those guards look great. That extra comb length is worthless when it’s behind the cutting blade.
@benreyes896 жыл бұрын
Blake P so is it just more of a cosmetic design than anything else ? Or could there be an actual benefit to those long combs ?
@doodlen13795 жыл бұрын
@@benreyes89 Hello. Do you think they will fit Babyliss?
@patrickfalls68195 жыл бұрын
I agree, anything behind the cutting blade would serve little to no benefit.
@jrawblue243 жыл бұрын
I’m jealous of that blue fast feed, can’t find them anywhere
@tmoney59763 жыл бұрын
Spray paint them it’s easy
@j145573 жыл бұрын
Amazon
@illestofdemall136 жыл бұрын
Based on the thickness, the Wahl 1/16 inch guard looks like it cuts closer than the Andis 1/16 inch guard. Has anyone compared the two?
@DoritosResidue4 жыл бұрын
Yes you are absolutely right! I compared the 2. But if you use the cordless master's you would not need this guard since it's blade is from a 000 to a equivalent 1 guard. Also I compared # 2s guards of both brands. The Andis one cuts shorter than the wahls #2. Wahls #2 is a bit far off from the Wahl 1 1/2 guard where Andis #2 blends perfectly with a wahls 1 1/2 guard.
@primitipcenil62555 жыл бұрын
👍
@robertwilliams78424 жыл бұрын
Those guards the damn truth!
@demetriharlan5887 Жыл бұрын
These things on a Andis cordless masters cut like light sabers.
@kodee816 жыл бұрын
Where did you get them guards from
@benreyes896 жыл бұрын
Kodac Kodi I got them off eBay bro . I went to go Link them to you but people are selling them for over 100$ which is insane . They also have them on Andis website
@elcocorote846 жыл бұрын
I just got those from eBay
@SiklistangBano4 жыл бұрын
got me a cordless master with double magnetic guards. to be perfectly honest... and i'm sure i'm going to get a lot of hate for this..........i'm not feeling these double magnetic guards at all. i mean i've used the single magnetics with my envy's before...and they sucked because the comb teeth were crap. the double magnetics feel WAAAAY more premium...harder and thicker plastic, smaller spacing between the teeth....but the magnets on the double magnetics are just too damn strong. when i lay them down on the table while working they stick and clump together. those magnets are so damn strong that i need extra effort to take them off the clipper. if you "click" them out, they stick to another part of the blade. so it's like...yanking them off the clipper twice if you know what i mean? it's so damn sticky that you have to slide them into and out of place with force that it actually mis-aligns the damn blade that I already zero-gapped properly. If you leave them in a barbicide jar, they stick together and sometimes you don't get to disinfect them properly. It's like dealing with super glue all the damn time. Got sick of it and decided to get these master premium metal clip combs. i'm getting them today. hopefully they're great. The teeth on these premium metal clip combs look thick and sturdy, but they're not as many as the ones on the double magnetics.
@nicklovesdata95465 жыл бұрын
You really recommend these over the double magnetic guards??
@7blendz8133 жыл бұрын
Yeah cus the double mag netic guards rust a lot
@bigzclipz51045 жыл бұрын
The andis fade master doesn’t need a 1nhalf guard especially when the blade teeth are long
@solf084 жыл бұрын
Bigzclipz exactly!!!
@johnnypercell37355 жыл бұрын
they actually have a half guard and a11/2 guard in single magnetic and double magnetic and regular guards go check out and is website and you'll see them ihave them and love them
@jaymell3405 жыл бұрын
Johnny Percell damn theyre out of stock... And its Master® Magnetic Comb Set - Dual Pack 0.5 & 1.5
@buckwitme15 жыл бұрын
Jaymell yea they belong to each separate pack! I have the new regular gaurds with my andis envy li nation and they world of different from the ones that use to come with the envy li and the half and 11/2 are beast even tho the gaurds already blend but these two guards make a difference imo
the problem with the magnetic guards by andis is its very similar to speed-o-guide by otster, they both get chewed by the metal blade on the machine, they don't last long the teeth also break off very easily , this is why i prefer either the premium or metal tooth comb guards (not to be confused with All metal detachable blades).
@buckwitme15 жыл бұрын
naz only time blade chews through guards are if you have you blades to zero gapped flush! I’ve had my magnetic guards 6-8years and they are still in great shape and I have my clippers right at zero gap but just a hair under! But these premium guards are like the speedo I can hear the hair being cut which s why I love using these over the magnetic and the fade better imo but they all work good In they own way for different things
@solf084 жыл бұрын
With Andis u don’t need a 1 and a half guard because the clipper blade is long enough
@tmoney59764 жыл бұрын
What about the fast feeds tho
@solf084 жыл бұрын
TMoney in my opinion same thing ... fast feeds also have a longer blade for fading... so no need for half guard ... but to close the gap u need to buy the #1 metal clip and replace the original and u get the zero gap there videos here on that ...
@nickvargas49994 жыл бұрын
So you don’t cuz I was thinking about getting a 1 and a half guard
@Najea956 жыл бұрын
Do they fit on the andis cordless envy li?
@johnnypercell37356 жыл бұрын
yep
@fadesonloc37586 жыл бұрын
I’m confused... these guards do not fit my fastfeeds at all
@tyherr50726 жыл бұрын
Fades Onloc are sure you have the new Andis premium? Cuz they'll fit ...but the Wahl premium.
@fadesonloc37586 жыл бұрын
Ty Herr yeah bro I’m sure I have the correct guards... I also figured out what the problem was... the metal clips on the back of the guards were sticking out to far... I bent them inward more and now the fit perfectly... so if anyone else has this problem that’s a quick fix
@yoitsmegabe5 жыл бұрын
Anyone know why they skip 5 and 7?
@grantk.27183 жыл бұрын
There's not a much of a difference when you get up to those lengths
@tyherr50726 жыл бұрын
Andis does not needs 11/2 guard cuz their guards are right nx to each other not like Walh..thats Y...
@robertwilliams78424 жыл бұрын
I am totally wireless unless Oster produce a cordless version I am Not intersted!
@cuba18216 жыл бұрын
Can they fit the envy li ?
@BC234M36 жыл бұрын
cuba1821 they should
@johnnypercell37356 жыл бұрын
yep
@henryortiz11756 жыл бұрын
I'm not sure if Andis makes a 1 1/2 at all. I could be wrong.
@benreyes896 жыл бұрын
Henry Ortiz a lot of people have been asking for Andis to make one but I don’t see it happening
@henryortiz11756 жыл бұрын
Benny Cuts It would be nice. Idk, i still don't fully understand why they say it is not needed. Idk why they don't just make one system for all clippers. Also i would like to kno why they even came back to these black ones when a couple years ago, the magnetic guards were the greatest thing ever. Like am i missing something? Did something go wrong with the magnetic ones. I kno some folks didn't like the single magnet guards but did something go wrong with the double magnets?
@Cisco661Barber6 жыл бұрын
Henry Ortiz not in plastic nah. But why would you need a 1 & a half when you can just use a one and open the lever?
@Cisco661Barber6 жыл бұрын
Henry Ortiz idk cause i use the purp magnetics as well as metal guards. But i did have to get dual magnets AND signle magnets because the doubles dont fit on octane metal guards, the singles fit snug instead. And the singles dont fit snug on fadeblade on a master, the duals though. Lol that kinda sucks.
@Cisco661Barber6 жыл бұрын
Henry Ortiz so basically idk why they made these premium black ones, magnetics are dope!
@onlylove5564 жыл бұрын
Shorter the teeth are on the guards the better that's why blades cut so much better than plastic guards Wahl premium the number one and a half guard just cut better than andis
@danielungureanu16936 жыл бұрын
Men... the andis guards is different then whal guards. At the andis guards you don't need one and a half guard because one guard and two guard are combined. If you don t know one guard with the lever closed at the andis guards is only one(3mm) and one guard with the open lever is one and a hald guard like (4,5mm) that means you have already one and a half guard in number one guard. You need to learn more about bearbering. Good luck
@benreyes896 жыл бұрын
Daniel Ungureanu thanks for educating us all bro
@buckwitme15 жыл бұрын
some truth but not exactly the truth! depends what andis guards you're using! the guards that came with the original envy li didn't blend into each other at all! but they have now updated those and they blend together beautiful no so it depends which ones you use! i have them all so I've had a lot of experience with them
@MrMerk315 жыл бұрын
Andis need to make a 1 1/2 guard and stop playing 😏
@patrickfalls68195 жыл бұрын
They do have it. They have the .5 and 1.5, in a two pack. Check their site.
@eevee44084 жыл бұрын
honesty i don’t think it’s worth it your adding two possible steps just flick out more?
@japanempire245 жыл бұрын
Lol they rebadged guards that use to come free with the masters lol they stabbed you in the back of the head lol
@Erik-ec6zv4 жыл бұрын
Roberto Munoz Sr. Lol
@jaymell3406 жыл бұрын
compare them (size, thickness) no homo... to the purple guards
@benreyes896 жыл бұрын
Jaymell lol bro I sold my purple magnetic guards a month ago and I wanted to buy a new set to compare them to these but they are IMPOSSIBLE to find and if you do they are way overpriced right now.
@Cisco661Barber6 жыл бұрын
Benny Cuts shouldnt have sold em lol. Buy from the barber tool box on google. Based out of bakersfield california G
@benreyes896 жыл бұрын
French Bastard thanks for the plug bro I’ll def check them out !
@Freeda_GotFades4 жыл бұрын
Andis don’t need a 1-1/2 Guard
@mlinecomposites12 жыл бұрын
The new guards you started the demo with suck for the 1/16. They will not cut as short as the older andis 1/16 guard. Thinner is better. Not to be confused with the wahls your showing. I’m so disappointed with andis
@nicklovesdata95465 жыл бұрын
Andis..... Why??lol 😆 why??
@jodye7776 жыл бұрын
Lol i was hoping you had the cordless envy's to see if they fit