New Bricklayers Clamps!!

[@daemonstoner6714]

Hi Charlie, these things are so easy to make yourself, when you see how much you pay for all the clamps, Topclamps, Dori´s and so on, it all adds up in cost, if you get a cheap weldingmaschine / Helmet also Rivetnuts Tool, everything else you neeed, you would probably already have! and a and a little practice, and watch a few you tube tutorials, you can make them yourself, at very little cost. Basically nearly all the metal needed you can get as scrap metal. Over time you´ll save alot of money and also get other ideas to make life easier on site, which means setting up takes less time, which makes more money! When there´s bad weather and your not laying make a few clamps and the other ideas you have!

[@clivehyde1756]

Have had the nail on external ones for years used to use them on mobile home bases handy bit of kit now use them when butting up against existing buildings Dutch pin at the bottom profile on theface dori block on profile nail on clamp top of profile 👌happy new year brother 👍

[@anthonyworthington6495]

They will be okay for theramalite block,and looking at it it looks like a masonry nail,just keep a box in the van nice one😁✌️👍

[@johncoppock3823]

Must be Christmas 🌲. Great to see you sent outside in the fresh air to play with the new toys. Need another video now on small hole repair . . . Happy New Year!

[@brickbybric]

Possibly meant more for timber frame housing ?

[@CharlieCollison]

no it is for brickwork apparently 👍🏻

[@huggy1huggy191]

could be right there cos most building in ossy land is timber framed studding

[@brickbybric]

@@CharlieCollison just looked them up on the BT Engineering Australian website and they are meant for brickwork.

[@jeremyb8941]

Let me know how they turn out after you use them for awhile...wondering if the nail will work loose after you put tension on it and the string line is tight.. thanks for the video .!!.!!

[@paularrowsmith9376]

They would struggle to get a true "bite" on green mortar from previous day

[@theteadrinker-143]

Nice , easy to make actually !

[@lmilne4859]

It is and they never have nothing in stock

[@ronnierobinson1502]

Any general masonary nails will work if you loose others

[@ianbarker1506]

Gone are the days of dutch pins. Can we still get discounts of bts clamps if we quote charlie collison

[@btengineeringbrickiestools5797]

Yep!

[@PlayfulPawsDogWalking]

Starting work tomorrow, In the UK so probably going to rain 🤣

[@huggy1huggy191]

any masonery nail will do that charlie

[@greetingsbox4229]

Do you think the nails will bend and get paggered? Are they replaceable? Hope your neighbour is a youtube subscriber and is understanding!

[@davidwells298]

Nifty clamps mate

[@chriswright2135]

Look great them 👍👍

[@JimJimpmjj]

Nice clamp great idea, but as with most BT gear it's always out of stock.

[@johnwarden4645]

I am on the way

[@andrewpalij4691]

As someone said they are made for Ozzy size bricks and barely fit , the internal clamps what go into the perp don't fit at all unless you use a 40mm profile then you can just get away with it or get a blacksmith to alter them think Ox are the same.

[@tibbs19]

Just nail it in the bed joint ...goes wherever then 😉

[@grahamebennett2620]

They never have any stock!!!

[@lmilne4859]

All the freebies they send out to the brickie channels lol handy also if had them on there site never mind them being out of stock. Amazed how they can’t this stuff in stock as it’s pretty basic to make any decent blacksmith would rattle loads of this stuff in no time.

[@brickbybric]

@@lmilne4859 if they can’t keep the uk stocked with product from there Australian workshops They should manufacture it in the uk . As you say it’s pretty basic stuff .

[@lmilne4859]

@@brickbybric Agreed bud.

[@btengineeringbrickiestools5797]

@@lmilne4859 G'day guys. Simon the owner of BT here. Yeah 2020 was a nightmare to be honest, as you can imagine dealing with COVID and production shut downs, then back, then shutdown made it very difficult. Then you couldn't get a spot on a ship for love nor money, then our wharfies here in Aus went on strike - it never ended.. Bloody nightmare. I really apologise about the stock, we've just ordered some more machines from Germany to keep up this year, they arrive in March. 2021 should be much better once we get properly back up and running. The stock we send to youtubers is a fraction of what we make. We do tens of thousands of items each month, so half a dozen to youtubers is not material. We are just a small business trying to grow. Cheers for the support and hope you had a great Christmas break!

[@markgoodwin8338]

Yep, most of they're stuff is always out of stock????

[@connorflint6985]

You can nail that into blocks

[@lmilne4859]

Looks very good them would be handy if they had some extra holes along the bar would handy you never no. Don’t why they do that BT and not even have them stocked on there site.

[@Aidansmallwood]

bet the neighbours love you 🤣

[@OutofTownwithRobinBell]

Happy new year mate 👍

[@granthad3613]

I see a Charlie Collison video, I stop what I'm doing and click, it's that simple! Keep up the good work bud, no way your channel can't blow up!

[@sharkhunt9476]

Works great 👍🎅🏻👍

[@MalcolmJames-sg3zg]

GOOD IDEA

[@JimmaYwild]

loving the flip flops

[@papapete966]

Agree Antony

[@harveysmith100]

They look the dogs. Nice to see the steel toe cap sandals. Safety third!

[@jackknife1796]

Theyre similar to the ones Jay uses on youtube! You seen his channel? He's belgium

[@stevesmart90]

So easy to make theses yourself Buy the normal ones, grind off the end return that sits in a perp, drill a hole Shh’ting use nails or screw, But don’t u dare do it, it’s my idea

[@hydrolist8559]

Charlie, real quick, serious question... is your girlfriend single? x'D

[@leeoffill1605]

Vandalism Charlie 😂

[@SteveAndAlexBuild]

No more chipped bricks 👌🏼🧱👍🏼

[@stuartjones1982]

Bit of snagging to do this afternoon then mate? Lol

[@eddieharding5961]

Won't work with softer joints !

[@trevorjohnson8644]

Nice flip flops 😂😂😂

[@tomtribe8461]

Clamps are made for Australian brick sizes so are useless for English bricks and a 50 mm profile

[@lmilne4859]

Noticed that not much to play with on the thread

[@tibbs19]

Just nail it in the bed joint...goes wherever then 😉

[@btengineeringbrickiestools5797]

They fit UK as well mate, it is snug though. Next batch I'll make some slightly different to fit a bit easier Cheers

[@johnb2044]

@@btengineeringbrickiestools5797 why not do a legged version for green mortar seen long F clamps used many many years ago on site

[@benstevens3566]

Ox do the same thing.

[@barringtonsmythe3464]

Cushty 👍👍

[@adamstudd28]

Be good on celcons

[@granthad3613]

First comment, fuck yeah!