NEW BUILD! Poizd t3 chassis! First run!

Poizd t3
savox SW-1212sg servo on front amzn.to/3UW7N5d
stock ascent servo on back amzn.to/48AzJyH
over drive in front portals
overdrive in ring and pinion amzn.to/3TfF5uD
Hobbypark external axle brass amzn.to/3Ii7Qk2
AMK carbon fiber wheels amzn.to/48xDtAX
WDW cut n shut BFG Krawler tires westdesertwhee...
3D printed squid’nserts sl3drc.com/pro...
sl3drc.com/shop/
komoto 10 2000 kv revolver motor amzn.to/49NYh8i
komoto python x esc www.furitekusa...
Dlux portal trans (right motor) dluxfab.com/Dl...
flysky gt5 receiver amzn.to/3SZ8GHg
-Capra axles
traxxas bigbore 2660 shocks amzn.to/3STRW4h
-13” wheelbase
-10” track width
-custom hinge body mount system

[@HobbyDrop]

Check out the description for the build breakdown as well as links!

[@jasonlund4750]

Cool cool. I am glad you got a POIZD rig. I rember crawling with u at pioneer Park. I was with the Arizona crew. We had a amazing time

[@HobbyDrop]

Oh cool! Dude that was a good time! Y’all’s rigs were impressive. Definitely sold me on this chassi

[@jasonlund4750]

@@HobbyDrop very cool. Thank u for the kind words. And u will go far with that rig for sure. Again u Utah boys are so cool. Thanks again for letting us AZ boys come play on your rocks

[@HobbyDrop]

@@jasonlund4750 your welcome any time man! 🙏🏼

[@ShoddyRC]

All the furitek stuff I’ve used chugs at low speed like that.

[@HobbyDrop]

Really?? Dang…That’s a bummer, have you seen em shut off like this right after a bind?

[@ShoddyRC]

@@HobbyDrop I haven’t. But I’m wondering if the bind makes it pull a bunch of power, which makes the voltage drop below the low voltage cutoff for just a second, but then comes back on after.

[@HobbyDrop]

@@ShoddyRC ohhhhh dude that sounds like some pretty legit logic…..

[@BeauLeonard]

I’m just addicted to watching RC rock crawling from out west. I live in the Blue Ridge Mountains of North Carolina so we don’t have crawling terrain like you have. What rocks aren’t covered in dirt and dead leaves are very grippy, though. I bought a Vanquish Phoenix last week because I couldn’t stand just being a spectator anymore!

[@HobbyDrop]

Haha that’s awesome. Welcome to the club man! It’s a great time. Yeah I can’t imagine doing that wet, slippery rock. Seems like a tough sell for me 😂

[@mikeearls8158]

I built a Poizd and it is my go to hardline rig. It was definitely a learning curve but once you get it dialed it is a magical rig. my last weigh in was 3.9 pounds, definitely my lightest rig.

[@HobbyDrop]

3.9?? Dude that’s crazy. I’ve heard 5ish lbs is ideal cause it gives it just enough weight to grab traction. I’m not sure how heavy this is. I don’t have a scale yet.

[@mikeearls8158]

Yup, super light!

[@PleasureAfterWorkRcCrawlers]

Very happy for you getting your dream rig together 👌👍

[@HobbyDrop]

Thanks man!! Now to make it better! Haha

[@rcarty419]

Man sweet build. Haven’t dared chop my Capra chassis. Those crazy front biased rear divorced drive shafts killer. Custom is so fun. So is this a sporty class rig. Can you run a poizd in class 2? I always think banding front is good my sporty isn’t but…on steeps looks like might help this. I gotta get some wdw tires. Gotta try a revolver…been so addicted to fusions. That was Awsome video!!!!

[@HobbyDrop]

Dude cutting up the Capra was so scary! Haha I’m not sure what class it would fall into, maybe sporty? It doesn’t qualify to be in our local class 3 because the chassis is more than 2 in shorter and the wheelbase….that was quite a bummer to find out.. Oh I forgot about maybe adding some deez bands! I definitely may try that. Thanks for the comment and all the support!

[@jonlaw3642]

Sweet rig did I hear something about a parts list? I’m new to this myself but there isnt any shops…ext around me so I wach KZbin and I’m in a few groups on Facebook so I take everything I can get

[@HobbyDrop]

Thanks man! Yeah check out the description, I’m not sure why things are crossed through? Haha but that will tell you what you need!

[@keldonator]

I also don't like how wide the capra axles are. I was intending to do the same using positive offset wheels. Do you know the measurement from hub to outside edge? I'll be building a Yue One v2 it's on the way now, I contemplated the t3 (can still switch everything over to one pretty easily if I change my mind). I also am considering using an ar45 rear axle instead of the capra.

[@HobbyDrop]

I’m not sure the outside of hub to outside. I’d check but getting my wheels on an off is a pain until my new tool comes in. With these wheels the nut is fully inside so I have to use little needle nose pliers to tighten em down. I haven’t heard of that chassis but if it’s an easy swap over to the poizd it much better pretty sick as well. The positive offset wheels narrow the truck quite a bit I feel, which is nice. The ar45s you almost have the opposite issue.

[@jacquelineandkevingonzalez1785]

Hey there my friend been looking at the pound chassis was thinking about building one n BAM I saw yours n I will definitely build one now ur right is awesome luv ur videos r awesome plz help me out

[@HobbyDrop]

Thank you! I’m glad my video inspired you haha. I’ll do a build breakdown next week to talk over what I’ve got.

[@donniehunter309]

Glad I found this. Cool rig and great video. I have been thinking of doing a Chopra. I will be watching for tips. Like you said, theres not a lot of info online.

[@HobbyDrop]

Hey I’m glad it was helpful. Definitely stay tuned for more content and a build breakdown next week!

[@brasher12a]

Building my T3 at the moment, any info you can give on cutting the cage would be good. Great video.

[@HobbyDrop]

If you can wait I’ll do a build breakdown next week and I’ll explain how I chopped up the body.

[@annaharpley1673]

amazing videos !! makes me want to build a hobby drop style rig !!

[@HobbyDrop]

Thanks :) that’s very kind of you 🙏🏼

[@jeffnewhart491]

I broke my rear plastic steer capra housing on my t3 today. Rig is a beast!

[@HobbyDrop]

Ohhh bummer! Haha but now you get to buy upgrades! 🤑

[@jacquelineandkevingonzalez1785]

I meant the poizd chassis

[@smokin0137]

Poizd chopra. The best with too much over drive. Amazing rig. Look forward to more. Thanks for sharing.

[@HobbyDrop]

Yeah I’ve got 30%ish in this bad boy!

[@beekerbeeker5779]

What's the rig weigh in at? What's your thoughts on the height of it now that you have run it? I really need to Holiday and rc down there!!!

[@HobbyDrop]

I’m not sure the weight. I need to get one of those cool 4 way scales. I think the ride height could definitely come down more. I haven’t messed with that too much tho. Haha come on down man! The weather and rocks are fine!

[@beekerbeeker5779]

@@HobbyDrop I run stock shocks on 1 of my Capra. I removed the springs and bottom cups. Ued the oil in the shocks can't recall to what. Lowered the cg. Alot also added. Brass on all 4 corners other Capra I used traxxas big bores 2.2 badlands. Some brass. Totally different preforming. But go places they shouldn't I'd show u pics but dunno how on this platform

[@HobbyDrop]

@@beekerbeeker5779 oh nice, so your a Capra guy through and through! Two with different setups. That’s pretty cool! Add me on Facebook-Hobbydrop. I don’t use that much unless someone is buying parts but that’s a little more user friendly ;D

[@WandererOfTheDesert]

Sick rig, my friend. What brass doing have coming good to see the Capra panels. Was looking at that chassis when I was at SkyRc. Put I pick up a Rock Pirates chassis. Stay safe

[@HobbyDrop]

I’ve got the brass diff cover for the front axle coming! That will be the end of brass I can add to the portals. Rock pirate chassis is a good one to allow you to direct swap. This one not so much!

[@WandererOfTheDesert]

@@HobbyDrop are you running brass in your wheels?

[@HobbyDrop]

@@WandererOfTheDesert I don’t have brass in the wheels, I might look into that tho if I feel it still needs the weight. I’d like to keep the overall weight as low as possible

[@WandererOfTheDesert]

@HobbyDrop Poizd might be my next choice. Just not sure about cutting up my Capra she was my 1st. Stay safe, my friend

[@HobbyDrop]

@@WandererOfTheDesert other bodies look cool too! Or get a new cage off someone 🤷🏻‍♂️

[@dannymendes4923]

Did you use the cage from an original Capra or the newer 4WS Capra?

[@HobbyDrop]

Mine is the newer 4ws Capra

[@dannymendes4923]

Thanks for the reply. I really like how your truck turned out. Do you know how much the cage weighs and when are you coming out with a build video? I’m very interested on the details of your build.

[@HobbyDrop]

@@dannymendes4923 dang I’m not sure how much the cage weighs..I’ll drop a build video next week! On Tues or friday

[@myrcjourney1149]

Is this car class 2?

[@HobbyDrop]

@@myrcjourney1149 no, it’s more of an unlimited class. Unfortunately. I was thinking it would be my class 3 rig. But the chassis doesn’t extend closer enough to the center wheels. (At least for my local comps)

[@teamcobrarcrccars6156]

I never have stock tires

[@HobbyDrop]

Yeaaaah stock tires suck most of the time

[@Loomis_Fishin]

I run a 850mah tattu and get roughly 45min of crawling. I’m running a 1500kv yellow jacket, silent assassin esc, 2Low, direct power rs700, reefs 99micro winch,on scx10.3 straight axles. I don’t know much about your esc but the battery cutoff might be set high. I think mine will cut off around 3.6-3.7 not sure it’s been a while since i went into the programming on it. Awesome rig, I’ve been thinking about building a coyote chassis myself since I haven’t seen anyone around me with one.

[@keldonator]

He is using two servos. Even though that rear servo isn't used much, it's still fighting to hold straight the entire time

[@HobbyDrop]

@@keldonator dude is that what’s killin it so fast?? The rear steer? I’ll have to figure out how to check what my battery shut off is 😂

[@HobbyDrop]

The coyote chassis is sick, you’d definitely like it, it’s similar to the reaper chassis which I love. I will convert my ascent to a coyote chassis ones I done with this poizd build probably.

[@keldonator]

@@HobbyDrop My outrunner also killed batteries faster than my fusion pro 2300kv but that in combination of outrunner/esc and 2 servos will tax your battery for sure. On my brushless 1/24 4ws I ruined a few batteries that were not high enough mah/c rating. Once I increased the mah/c rating it was fine. It would do that same thing as yours is cutting out like that, I think the voltage dips under the cutoff or something occasionally.

[@Loomis_Fishin]

@@keldonator I didn’t think about that. That is definitely the case with the battery drain. I’ve never ran 4ws.

[@dublintwentyfour7163]

That is pretty slick! It's always fun to take some out of the box anything and make it something much much more !

[@HobbyDrop]

This one was let me open a lot of boxes (mostly bags 😂) and create something new! Haha it was fun!

[@smokin0137]

Dude that side hill was awesome.

[@Zach.sarver]

I love my t3, definitely the most capable crawler I’ve ever had

[@HobbyDrop]

I need to get this one there! Right now my CCW reaper can still out crawl it on most obstacles.

[@jacob_chinn]

That’s funny those ruptures and squid’s I bought from you were for my poizd I was building 😂

[@HobbyDrop]

Hahaha for real? That’s awesome 😂 well thank you for assisting with the build! Ha

[@jacob_chinn]

I’m new to the revolvers too and yeah mine cuts out too making me think it’s the battery but then it’s not, I’m running a rhino 80 esc and all settings are good so I’m not sure either😂

[@HobbyDrop]

@@jacob_chinn well shoot, looks like we both could use some pro advice haha

[@mikedubree2064]

I've got one and I love it

[@HobbyDrop]

I’d love any pointers that you may notice for tuning this bad boy as the videos progress!

[@tylernorton6443]

Killa rig!!

[@HobbyDrop]

Thanks!

[@RcCar-hn9rv]

I am very impressed with what you have created. I'm interested in making that too. Thanks alot for making this video💯 I hope you're making more of that interesting 🛻 crawler videos

[@HobbyDrop]

Thank you! I definitely will have lots more content on this bad boy!

[@JeremyJohnston-yv3wz]

Negative offset on wheels makes it wider

[@HobbyDrop]

@@JeremyJohnston-yv3wz you are correct. But how does that make sense tho. Ya know? Haha