Furitek Perentie 10pole 1950kv motor with the Lizard10 esc

[@mikehagquist5198]

Favorite part of your videos is before and after the driving. Just the knowledge and the way you talk about the products. Love it.

[@mikebird8290]

HI JOE DEFINITELY GOT ME INTERESTED. THIS COMPANY IS GOING FROM STRENGTH TO STRENGTH. TAKE CARE SIR. 🇬🇧🇺🇲🕊️✌🏼🤩👍🏼🤙🏼

[@stuckintrees4796]

I took the rear battery tray and mounted it sideways between front shock tower and the transmission and it helped the truck so much.👊

[@Mckhus]

Furitek coming almost out of nowhere and dropping good product after good product. If I were in market for crawler I’d deffo heavy consider stuff from them

[@derrickwilliams2903]

They have completely dominated the 1/24 micro crawler ESC market for 2 years. Their 1/10 ESC is basically just a scaled up version in a case with heatsink.

[@johngookinsable]

Man TECHNOLOGY has came a long way. Seems like a bad ass setup! The stuff they make for 1/24 is off the chain also👍

[@machinedred]

That performed way better than I expected!

[@mrboat580]

Cool yard. Currently making mine an amusement park as well. I use bumper dig a lot as well. I'm using the yellowjacket/copperhead 10 and it is quite nice. No bias, just that I could not get the combos I wanted (OOS) from other vendors so I ended up with this setup. It's a 2000 or so kv and not very noisy at all. Very smooth, especially pared with a relatively silent trans from amzon.

[@NCMATT]

I like 👍 the slow 🐌 stuff in the hobby

[@NCmountainsYouTubeChannel]

I really can’t wait to see the new deadbolt SCX10ll v2 just relaxing and watching KZbin channel s I’m so excited to see if the UMG 10 6x6 is coming back 💁‍♂️ and I can’t wait for the kit Versions 🤷‍♀️. The brushless combo is pretty cool.. I really like My brushed set up ⬆️. On my crawlers

[@mikellewis2346]

The holmes hobbies pp 3500kv is my favorite crawler motor to date. It has really good slow crawling capabilities and also has good speed. I run it in my wraith 2.2 with 32p 60t. Spur and a 9t pinion and that allows it to crawl like a slug yet has the power and tip speed to bash it in the grass and hit even small jumps with a backflip mixed in. Love it. Also I run it with a mamba x on 3s playing and 4s crawling. And never over heats. I even ran it around the yard with my boys and the granite voltage trucks and on 4s it never got over 130° on the motor or esc.

[@shadow7796]

I'd be interested in seeing how it performs at low speeds with a higher gear setup, and how much top-end change there is.

[@ekpauly]

Very nice looking system. You should try this in a vehicle more capable with less gear reduction. 🤙🏽

[@Xofroggy]

No such thing as too slow lol, i kinda like that combo, its super smooth, what do you think is better this setup or the fusion pro 2300kv

[@JuanOrtiz-of1sr]

Man that is awesome super smooth.

[@guguscosta5284]

wonderful video to change the hobbywing combo for this one, the advantage is to have less weight because the performance is almost the same. In my opinion the only problem with this esc is not being waterproof.

[@SteadfastRC]

Looks like a decent system but as for myself I would rather support Eddie and buy something from Team Brood Racing. I love their stuff.

[@Moggmodels23]

Just watched your video brilliant video mate nice truck and fast speeds

[@jdsrcs8061]

Very cool set up. I like all my Furitek stuff for my 24. So which set up do you like more this or the 2in1 Pro.? I do agree with the bumpers. They have saved me more then hindered me.🤘🤘🤘

[@Scale-Crawler-tamiya-Xray-RC]

Hello, you do not know if the SCX 10 ii can put the bridges of SCX 10 iii

[@jerryvolpini7987]

Impressive but unless it is significantly cheaper, no need to go away from Castle or Hobbywing. Good review 👍

[@douglaselliott8298]

Since it's Brushless and requires an appropriate ESC can it be bought with Traxxas iD connectors? It has the slowest, most controlable 'start-up' I've yet to see.

[@001blackmax]

Are you running the solid axle gearset in the trans? Wasn’t sure if they would work in the new base camp 5 gear.

[@blacksheeprc8113]

I want to get into crawling and get me one so bad

[@modzilla74]

It's nice, but I'd still rather have a fusion

[@ReddleyYT]

Hey Exo! I would like to know if you can do a review of a set of paddle tires I'm going to be selling that I have custom designed and am 3d printing. If you are interested where should I contact you to send you a set?

[@redndeyes]

Your opinion vs fusion pro?

[@ExocagedRC]

Totally different setups. I feel the fusion pro may be more durable in high stress applications but time will tell on this one.

[@redndeyes]

@@ExocagedRC just ordered another pro this ones for the wife. Swapping from v2 axe 540 2100kv. Axe can't compare to the slow start control on the pro

[@randall4411]

According to a guy who commented on one of my post if you put a power wagon body on it will perform better . Ok....

[@hobbykububut_utan9529]

Test am32 sir...🥳🙏🙏