*NEW* Denon DJ SC6000 & X1850 Unboxing, Digital Setup, and Single Deck Mix!!

Today I unbox the mighty Denon DJ SC6000 Prime and matching mixer, the X1850 Prime. These new DJ decks from Denon will change the DJ game! Check out the video for a look at the digital setup. SC6000 - amzn.to/337Eekx - X1850 - amzn.to/33bwGgy Cable - amzn.to/3h4CNs4
0:00 - Intro/Start
1:25 - Backstory
2:25 - SC6000 Unboxing
4:34 - X1850 Unboxing
5:55 - Why a Digital Setup?
7:45 - Digital Connections
8:32 - Updating the SC6000
10:23 - Single Deck Mixing Issues/Thoughts
12:43 - Single Deck Mix!
Become a Patron!! bit.ly/TDPatreon
Check out the cool shirts at INTO THE AM: intotheam.com/TECHNODAD
Rent 4K Blu Rays at 4K Blu Ray 4U: bit.ly/TD4KBR4U
2020 4K TVs:
Samsung Q90T ON SALE NOW - technodad.biz/SamQ90T
LG CX OLED - technodad.biz/LGCX
Sony A8H OLED - technodad.biz/SonA8H
Samsung Q80T - technodad.biz/SamQ80T
Sony X950H - technodad.biz/X950H
Samsung Q70T - technodad.biz/SamQ70T
Lustre Links:
Best 4K TVs by Budget - my.lustre.ai/zAsG2
Best A/V Receivers by Budget - my.lustre.ai/ZiPBQ
Best Noise Cancelling Headphones - my.lustre.ai/qUgge
Best Portable Bluetooth Speakers - my.lustre.ai/NzeI6
Best Gaming Headsets - my.lustre.ai/YPsR3
Best Computer Monitors - my.lustre.ai/mB3gq
Try the Lustre Chrome browser extension for free - bit.ly/2zVrUt9
My favorite subwoofers: technodad.biz/REL'
Monoprice subwoofers: amzn.to/33G8iD0
Discounted Denon AVRs: amzn.to/2NfNtXs
Discounted Marantz AVRs: amzn.to/2BFYNYb
7-Channel AVRs: amzn.to/2DmnMBt
9-Channel AVRs: amzn.to/2PVf2Jl
4K HDMI Cables: amzn.to/2QCi3LW
Budget Range 4K TVs: amzn.to/2JLaf7X
Mid-Range 4K TVs: amzn.to/2zEqdfA
Premium 4K TVs: amzn.to/2qxoRPx
OLED 4K TVs: amzn.to/2R9DRC5
Sony 4K TVs: amzn.to/2QM5YqR
B&O Headphones: amzn.to/2RulKDG
Recommended Soundbars: amzn.to/2SVutDV
DISCLAIMER: This video and description contain affiliate links. As an Amazon Associate, I earn from qualifying purchases.
Check out my recommended products on Amazon: www.amazon.com/shop/technodad
Equipment used to film & edit:
Panasonic GH5: amzn.to/2DteYKZ
Panasonic 12-35 mm f2.8 lens: amzn.to/2PMiPsx
Panasonic 42.5 mm f1.7 lens: amzn.to/31VGg50
Sachtler Flowtech 75 Tripod Legs: amzn.to/2KSyqDI
Manfrotto 504HD Video Head: amzn.to/320tzFU
Edelkrone SliderOne V2: bit.ly/2Pbvk1L
Edelkrone SliderPlus: bit.ly/2Pky0KC
Edelkrone HeadOne: bit.ly/2ZnsxWR
Edelkrone DollyOne: bit.ly/33TKHPK
Edelkrone FlexTILT Head 2: bit.ly/2Pkyr7I
Atamos Ninja Inferno 7" HDR Monitor: amzn.to/2N3pM6k
Portkeys BM5 Monitor: amzn.to/2Z8RI09
Tilta Nucleus Nano: amzn.to/2TUKsiK
Godox LED Video Light: amzn.to/2Zbf2dD
Rode NTG-2 Shotgun Mic: amzn.to/2pxXwj7
Rode Procaster: amzn.to/338cfjA
Rodecaster Pro:amzn.to/2NtK7Rg
Zoom H6 Handy Recorder: amzn.to/2NzSUku
MacBook Pro - www.jdoqocy.com/click-8786448...
iPad - www.jdoqocy.com/click-8786448...
Mac Mini - www.dpbolvw.net/click-8786448...
iMac - www.dpbolvw.net/click-8786448...
Thank you for watching!
Don't forget to like and subscribe!
Facebook: bit.ly/TD5FBP
Twitter: bit.ly/TD5TWTR
Instagram: bit.ly/TD5INSTA
Spotify: bit.ly/CDS29YrsS
Soundcloud: bit.ly/DJCDSSC55
Techno Dad Audio Demo Tracks - Tidal: bit.ly/2IxZzKO
Techno Dad Audio Demo Tracks - Spotify: spoti.fi/2Rnv4dv

[@SteveSmith-cm1hx]

Wow! Thats a beautiful looking piece and right up your alley TD. Start rocking the music with that bad boy!!!

[@TechnoDad]

That's right Steve! I'm going to rock it out!

[@keepingupwiththejones2933]

I love your honesty and candid approach to how challenging you found the one deck mixing. I think it is cool to see a window into the professional world of your dj realm. Thanks for sharing.

[@treyharlan8289]

You prolly dont care but does any of you know of a way to get back into an instagram account?? I was stupid lost the account password. I appreciate any assistance you can give me!

[@khalidalonso5172]

@Trey Harlan instablaster ;)

[@treyharlan8289]

@Khalid Alonso thanks so much for your reply. I got to the site on google and Im in the hacking process now. Takes quite some time so I will reply here later when my account password hopefully is recovered.

[@treyharlan8289]

@Khalid Alonso it worked and I actually got access to my account again. Im so happy! Thank you so much, you saved my ass!

[@isaiahfurrow7414]

Found your channel looking at surround sound AVR stuff.... but totally gonna have to watch and like anything DJ related I see of yours... Keep shining bro... Denon DJ rocks!

[@TechnoDad]

Thank you so much Isaiah! I will have more and there's always my DJ Stream every Saturday at 2PM PST here on KZbin and on Twitch - Twitch.tv/TechnoDad55.

[@rabeahkarram9689]

This is the type of teacher/tutor of my dreams and the way this video was made and all the details nice and slow very professional you are killing it keep this going I love your channel well done man : ) please continue to teach and train us with your videos : )

[@TechnoDad]

Thank you!! I have been teaching guitar and piano for many years and have had about 15 students on average before COVID. No more though...

[@TechnoDad]

@Dust Pan It's all good Dust Pan, I've been doing this since 2001 and still have my SL1200s....anyway, it's a pretty simple concept. The digital coax connection uses a standard RCA connection. You can use standard RCA cables in a pinch. I would go with an actual digital cable like the Mogami RCA which are 75 Ohm digital cable. When you use the digital ports, you only need one cable to transmit both left and right. So if you were to use the Red RCA for Layer A, that will handle both left and right for Layer A. Use the White RCA for Layer B. Of course, you will need a mixer with Digital inputs. I got rid of the Denon and picked up a Pioneer DJM 900 NXS2. Hope that helps!

[@fernandoguardiola592]

I'm from Chile... its exiting to get a look at these pieces. It takes a while to be able to try them... my son loves djing and we were discussing about the ne new denon gear and how is shaking the market. Thanks for the review.... and by the way I miss the klipsch stuff... best vibes!!!! ;)

[@HouseWirtschaft]

Great content, mate. Clear explanation and good mixing. Got the mixer already and the players are going to arrive hopefully tomorrow. Thanks to you I can’t wait ! :-). Keep it up !

[@TechnoDad]

How do you like the players?

[@HouseWirtschaft]

@@TechnoDad Very much ! The more I use them the more I am in love. We have a livestream every Friday and they are doing really well. The players, that is ;-)

[@frantzlauredant3425]

Thank you for the well explained guide!

[@TechnoDad]

You’re very welcome!

[@gainstage4497]

Just got my first SC6000M today... Added it to my three(3) custom 1200’s & Rane rotary setup... So sick, cheers

[@TechnoDad]

Nice! I just got the Rane MP2015 a couple of weeks ago, and It's been amazing!

[@gainstage4497]

@@TechnoDad - So amazing. I own a fully restored MP2016 with an XP2016. I’m and old school kinda guy and expanding into the new school sir. Keep up the amazing channel

[@marknarain6617]

bro u r down to earth cool dj and a great demo man

[@TechnoDad]

I appreciate that! Thank you for watching!

[@marknarain6617]

@@TechnoDad I am older than u bro I dj at home I got 2 3000 and I 6000 +v10 awsome

[@ericburgos]

I use the artwork of the tune and the layer colors to keep my channels straight when using the layers on my SC5000 players - it helps BIG time!

[@TechnoDad]

Gotcha! Great idea! I completely spaced on changing the color or the cue buttons on the mixer. I figured that out has been helping a lot.

[@sebastienrobert5179]

It’s a amazing setup dual layer on each deck love denon since a long time ago

[@TechnoDad]

Yeah, it's pretty cool. I have since purchased a second unit and swapped the mixer for a rotary Rane mixer.

[@keepingupwiththejones2933]

The last 15 minutes is a well earned victory lap of Channa playing with his new toy. The sound effects were really cool towards the end😎

[@TechnoDad]

Yeah, the effects on the mixer are sooooo much better than my other Denon setup. You do get what you pay for!

[@keepingupwiththejones2933]

@@TechnoDad Totally random but some troll was pissing me off so I made my first KZbin HT video. Gotta start somewhere 😅🤣

[@djfuzzofficial]

Excellent video, thoroughly enjoyed the walk-through. Beautiful crisp shots of the kit 😍. Mix was dope too! Subbed now. Only negative for me personally was it felt like you're too close to the camera when you're talking, made me a bit uncomfortable, like I was staring into your soul 😅. Anyway, thanks for the vid, look forward to watching your other stuff 💪🏾

[@TechnoDad]

Thanks DJ Fuzz!! LOL! Staring into my soul, first time I've heard that. Here's a link to Saturday's DJ Stream, next one is September 26 at 2PM PST - kzbin.info/www/bejne/j6m4fJWkfKdlpJI

[@keepingupwiththejones2933]

Channa you said you weren't buying anything else!??! LOL. Of course I will watch it for you . You give us so many amazing videos. You deserve this. I see you pre-ordered in February so this doesn't break your self imposed buying embargo. 😅🤣😂

[@TechnoDad]

LOL!!

[@happens4656]

I'm a DJ and I found your channel because of this video. Not sure how much of your channel will end up being for me, but I'll stick around and see. I guess this explains why there isn't anyone here complaining about your mixer choice... lmao I'd be happy to show up and use an X1850 at a club but I'd probably buy a Xone 96 for myself. For $1100 it's obviously way better than any of Pioneer's offerings at that price.

[@TechnoDad]

HI! Thanks for watching! I'm a DJ by trade. Been doing it since 2001. Played out in LA and Hollywood from 2001 - 2005. I had a thriving Wedding and Event DJ business until COVID hit this year. I've been on many Pioneer DDJ/Serato DJ setups until I kept getting audio dropouts last summer. I switched to the Denon Prime 4 and used it for the rest of my gigs last year and for my DJ Streams on this channel. I've always wanted a flagship setup and since I've been DJ Streaming since mid-March I felt like I should treat myself. My second SC6000 arrives today and this setup will stay here at the house. I'll use the Prime 4 for Weddings. I was thinking about making a couple of videos about this gear even though my channel isn't DJ focussed. I have been using this Denon setup with the Pioneer DJS1000 and was going to make a setup tutorial video and I was also going to compare the SC6000 with the CDJ900NXS since they are only $100 apart in price. I've seen all the "flagship" comparison videos but in all honesty, that's not an apples to apples comparison. Just like when I review TVs or A/V Receivers, I always compare the ones that are close in price. Anyway, here's a link to last Saturday's DJ stream, and the next stream will be on Saturday, September 26th at 2PM PST. Swing by if you like - kzbin.info/www/bejne/j6m4fJWkfKdlpJI

[@keepingupwiththejones2933]

That touch screen is pretty sweet. You have to be so excited about getting a new turntable of this high end quality.

[@TechnoDad]

You wouldn't believe! Almost 20 years of DJing and finally I can get a flagship digital setup.

[@keepingupwiththejones2933]

@@TechnoDad So happy for you. You have more than earned it. Thanks for sharing

[@martyncardno2172]

Finally... some one testing out this turntable with decent tunes.... Hello from Scotland. Just sold my DDJ1000 SZ's and looking at these.

[@TechnoDad]

What's up Scotland?!?!? Follow me up on Twitch (twitch.tv/technodd55), I do a live DJ set every Saturday at 2pm PST. I get a lot of folks from your area, I think it's 10PM your time. Here's a link to last Saturday's show. There's an intro loop that lasts for 3:45, so jump to passed that - vimeo.com/535367786

[@1matzeplayer1]

That player is so Dope!

[@TechnoDad]

I’m loving it!! My second deck arrived and I’m excited to get it set up

[@d.holland209]

Once you color code the mixer with the layers you will be good to go. Denon is the way to go!

[@TechnoDad]

Yeah, I figured that out a day after I made this video. Lol! I’m going to amp live stream tomorrow 2pm PST if you want to check it out!

[@ExtremeReviewer101]

As a person whom use to DJ, I've started going towards more of video production. But I don't mind seeing new DJ gear to seer what's changed compared to nearly 5 years ago from what I've learned in the past. Things have changed Radically. But ever since Denon mentioned having the ability to play music when the power is out, made me love them that much more. I hope someday they can figure out how to have the mixer power the SC6000s without having a bunch of power cords into a surge protector. Even better, a large battery to power up the entire equipment, without needing a surge protector and lasts for 8 to 12 hours. Now that would be something I want to see a DJ company go for.

[@TechnoDad]

That power thing would be pretty cool! I actually got a new mixer for my setup, a RANE MP2015 rotary mixer. It's sick! Fully digital but with an analog feel. You can see my setup in this video, just fast forward 10 mins - vimeo.com/506623518

[@RomanSpike]

The honest review, thnx! =)

[@klozher38]

Good content. Question here, When using the layers in this way when trying to use the deck as a solo device (Because these are a GRIP) is there an option to change the color scheme for the "other" layer like Layer A be that Blue and layer B be red AND can the tracking showw them together one on top of the other to confirm the beat matching is synced and tight.

[@TechnoDad]

Hi! Thanks for watching! Yes, I have it so that blue is layer A and purple is layer B. With the new update, it shows both waveforms a lot better.

[@MetalsForBrunch]

That is dope man. It makes me wanna learn how to dj but it's a hobby I can't afford.

[@TechnoDad]

It can get pricey really quick. I've been DJing for almost 20 years now and this is a flagship player.

[@LyK0sa]

Doesn't need to be that pricey man, assuming you own a laptop or PC just get yourself an affordable controller and start learning. Of course its a slippery slope from there, I started out on the original numark mixtrack Pro, 5 upgrades later and I'm running a pioneer XDJ RX2, so it hasn't exactly been a cheap hobby for me haha. You don't need high end gear though, it won't make you a better DJ. The one thing I'd recommend is buying something with nice long pitch faders, short pitch faders are one thing that will definitely hold you back if you want to learn old school basics like beatmatching by ear. Some people will say that in an age of BPM readouts and stacked waveforms it's not necessary, but I find confidence in knowing that I can still mix without waveforms and accurate BPM info.

[@raiyanhafiz2713]

Hey 👋 can you make a a setup video like I mean full thing how to connect and etc and show with the cable with the box and difference cause I am new to it please

[@SiServices_ZA]

Evening Techno Dad, I think the only way you're gonna MASTER this BEAST is .... if you had 4 (four) arms ? Impressive Kit, and a pleasure to see you do your thing ! Passion for Music ... it's everything ! But the real reason for commenting ... is ... I hope you'll read the rest of my message ! You'll remember during this Saturday Night's Subwoofer Workout, 5th September 2020, I asked in the Chat Section, if you would consider donating your old kit? It's for a worthy cause ... to give a young man ... the same inspiration, desire & passion ... to boost his confidence ! The deserving young man's name is Grant Scott Jnr ... up and coming young DJ ... DJ Grant SA ... I've got the name right this time ! He's won a number of DJ Competitions locally ... and well respected for his work ethic ! He lives in Pniel, with his parents & younger sister, which is a small town, just 15km outside Stellenbosch. He has the PASSION ... and DRIVE to excel in this competitive industry. Link to his Facebook Page ... facebook.com/djgrantsa.gmail.co.za Please have a look ? I await your reply. Gary @ SiServices [e-mail]

[@FabrizioLuraghi]

20:08 it´s not easy like you said but this player it´s awesome, with some practice .... thanks for the rewiev how many is the cost in USA?

[@TechnoDad]

Yeah, it's been getting easier. Here's a link to my DJ Stream from Saturday - kzbin.info/www/bejne/j6m4fJWkfKdlpJI

[@fernc3502]

Channa, great video. Is there a feature where the mixer and player could give a faster visual cue? For example, having jog wheel and mixer output meter lights indicating one color for track one. So when you switch to another track, the jog wheel would turn to another color. This would would be a fast visual to not press play or cue when both player and mixer are outputting same color. Make sense?

[@TechnoDad]

Apparently, I can change the color of the CUE button on each channel of the mixer, so I can match that to the layer on the deck. I think that'll be the way to go. I'm all jazzed up and want to try it out but I have to go to sleep...

[@damcii4944]

Thank me me for for a great 😌😌 thank

[@niterida380]

Actually it's easy to not get confused doing one deck mixes if you remember what color you assign to which side.

[@TechnoDad]

Yeah, I figured out ho to change colors of the CUE buttons on the mixer and it's been easier. Here's a link to the Saturday's DJ Stream - kzbin.info/www/bejne/j6m4fJWkfKdlpJI

[@djshortefromphilly]

@@TechnoDad also try the On Air feature in the settings..it'll help you remember.

[@JBxBassheadx]

This looks bad ass

[@TechnoDad]

Yeah, it is! and it's freakin' HUGE!!

[@keepingupwiththejones2933]

Mogami 75 ohm cables are great shielded cables

[@mattgiunt]

Not a DJ but that is one beautiful piece of hardware and it makes me wish I was one.

[@TechnoDad]

Yeah Matt, it's taken me 19 years to get to the level of finally having a flagship DJ setup. I'm so happy!

[@joostmatijsen6290]

Hi Technodad, i was triggerd by digital setup in your title for the video, i have this set the X1850 with two SC6000M. Recently i put a AES module in my NEXO amplifier and connect it to digital out on X1850, but i have no sound out of the amplifier, can you please help me with the correct setup. Regards Joost

[@lesmatthews459]

The topic had no interest to me - but had to watch to the end. It was like watching one of my kids opening their Christmas present they were hoping for!! LOL!!

[@TechnoDad]

LOL! Thanks for watching LES!!

[@DeBanked]

Thumbs up / sub just for being called Techno Dad, my kids call me Techno mom, love the reviews btw my next setup once i sell my Pioneers

[@TechnoDad]

Very Cool!! Thank you for subscribing! I too had to sell off some older equipment to get my second deck. It should be here Friday, I'm so excited! Here's a link to Saturday's DJ Stream and the next one is September 26 at 2PM PST - kzbin.info/www/bejne/j6m4fJWkfKdlpJI

[@romigi]

hi, thanks for the video. can i know the track at 23min? much appreciated.

[@apexpredator_jku]

The new Industry Standard. The SC6K makes the CDJ3k look antiquated. Have you tried hooking the SC6K up to the Prime 4?

[@TechnoDad]

H! Agreed, the new CDJ needs a lot of work to come close to what the Denon players can do. Yes, I did connect it up to the Prime 4. The only thing you have to do is make sure the firmware matches for both devices.

[@CANNELLALINESOUND]

Hello . I am start. I have 2 sc6000 and one x-1850 i try conect cables but only sond in one deck i look the manual but not work. Can you make a video for conect 2 sc600 in one x1850 ? I dont know how can i put sound in another sc 6000.

[@BOBBYdigital31]

Question for you. I just bought the prime 4 about a week ago and am very satisfied. I can't believe how far we've come since I used vinyl 20 years ago, even played at a club which was awesome. I've been out of the loop so long because of wife and kids, and using this new tech is incredible. I'm retired from the scene now and this is mostly my hobby now just making mixes for friends and family, and getting a release from life issues. I was debating returning my prime 4 since I'm in the 14 day return window, and instead now going for the full 2x sc6000 and x1850 mixer setup since I have the money for it. Would you say it's worth the extra or is the prime 4 pretty much the same? I'll be honest I prefer the bigger jogs but it's not a deal breaker. Although the sc6000's and x1850 just look more professional and I'm sure they feel it too. I've got about another week to make the decision to exchange the prime 4 for the full sc600 deck and x1850 mixer setup. Since you've used both I'd figure you have the best opinion on it. Is it a no brainer to upgrade?

[@TechnoDad]

I’ve had the Prime 4 as well and the big thing for me is the effects on the mixer and large screen for each deck. I ended up selling the Denon mixer and moved to the Pioneer DJM900-NXS2.

[@BOBBYdigital31]

Can one sc6000 playing as deck 1 also display deck 2's track on the same screen and vice versa so I can see the transitions? Im not refering to dual layer, im talking about tracks playing on the other deck seeing them also on the other decks screen. Kind of like how I can on the prime 4.

[@TechnoDad]

Hi! I’m not 100% sure as I haven’t updated the decks in such a long time.

[@aaronw4537]

I think the biggest advantage of a digital connection between player and mixer is that it's basically impossible to clip the input.

[@joseduarte8024]

Hey, is it possible to mix with the Denon Prime 4 and two Sc6000? i haven't seen this and im not sure if it is possible :,(

[@TechnoDad]

Hi DJ Vella! I did that with mine. I believe you need both the Prime 4 (adorama.rfvk.net/Gjnm5r) and the SC6000 (adorama.rfvk.net/6bAe9V) on the same firmware version and then it's good to go. You can share the library across the decks with the ethernet connection. I would look at the the new LC6000 (adorama.rfvk.net/3Pj9Yd) as you can just control the other layers on the Prime 4 with those at a fraction of the price of the SC6000.

[@joseduarte8024]

@@TechnoDad It would be cool if you make a mix with the Prime 4 and the Sc6000 :3, Thanks for the answer :3

[@isaiahfurrow7414]

Great video! You should do more DJ videos... I'd bet a decent portion of your viewers would be interested, or watch even if they're not already into DJing. Plenty would probably watch anything audio/tech related you put out. Subscribers that don't want to watch shouldn't mind the additional content... I have been wanting an SC player beside my MC7000/Serato setup for quite some time, now I'm torn between wanting that or the 6000, but not sure I'm ready to leave Serato behind yet... If you haven't snagged up a second deck, Denon should send you one...lol Is Denon/Marantz home audio gear and Denon DJ all still the same company, under InMusic? Nice mix...

[@TechnoDad]

Hello Isaiah! Thank you for the kind words, I actually do a live stream every Saturday at 2pm PST, like this one - vimeo.com/506623518 I also got another deck and swapped out the mixer for a RANE MP2015 rotary mixer. I'm loving it!

[@isaiahfurrow7414]

@@TechnoDad what did u do with the x1850 mixer? ....

[@TechnoDad]

@@isaiahfurrow7414 I'm planning on listing it on eBay in the next couple of days.

[@BlueHawk80]

10 salty CDJ owners disliked this amazing video ;)

[@TechnoDad]

Hahaha, right?!?! I got a second deck and a RANE MP2015 so I gotta put the X1850 up for sale. Check out the live DJ stream Saturdays at 2pm PST. Here’s a copy of last week’s show - vimeo.com/514808638

[@djgrooves]

yeah free is always good

[@sabatheus]

Go for Mixcloud. They'll never shut you down, and they support the artists via your stream. Not affiliated, just a fan.

[@TechnoDad]

I multistream through Restream to two KZbin channels, Twitch, and Periscope (Twitter). I heard they just incorporated Mixcloud, so I'll definitely give that a shot!

[@TechnoDad]

I stream for about three hours at a time so...

[@sk8tb1]

Hey brother can the sc6000M single deck do the same. ? Btw do I have to buy the mixer as well because I got an older one

[@TechnoDad]

Hi! The SC6000M should work in the same fashion. You can use whatever mixer you want. I ended up getting a Rane MP2015 and another SC6000.

[@sk8tb1]

@@TechnoDad awesome. does the sc6000 depend on wifi or can i go out to the woods and mix aswell ?

[@TechnoDad]

@@sk8tb1 Hi! I don't use Wifi. I load all my tracks into Engine Prime software and then use an external SSD to plug directly into the SC6000s. So as long as you have power, you should be good to go!

[@sinistai.z.3622]

I had to laugh I could see you was a bit confused at times which layer you was on. But it's not that difficult I got use to it pretty quickly, but yes in the beginning from force of habit your always looking for that other deck. I configure mine on one and four so I could just go across and keep some normalcy. I have the sc5000 kit, really not interested in bigger jog wheels but it does look lovely. Thinking of getting the motorized version

[@TechnoDad]

Yeah, it was tough making this video. I did a live stream yesterday for three hours and it was a little bit better. I did make a couple of mistakes but I have a second SC6000 on the way. I tried out the motorized version at NAMM this year and they seem pretty cool. I don’t do a whole lot of scratching so I went with the standard SC6000s.

[@sinistai.z.3622]

@@TechnoDad Nice, I loved the set you did pretty good considering the music was royalty free. Some definite head nodders there. Yea I'm old school so I don't need screens or anything I do everything by feel so I figured motorized would just give a better tactile sensation. I spin alot of house and E.D.M.

[@slavikmerkouloff3356]

How do you load your music? With USB Cards or Online Music?

[@TechnoDad]

You can do both with this player. For USB drives you need to download Engine Prime Software and load the songs through that. Or, you connect the player to WiFi and connect your Tidal or Beatport account and then stream music to the player.

[@DJKAILO1]

can we use the sc6000 with serato without the x1850 or 1800 but it with another mixer?

[@TechnoDad]

I’m sure you can use the SC6000 with another mixer but I’m not sure about Serato functionality.

[@MrHairyfriend]

You did a great job buying Denon. The new Pioneer CDJ is a joke.

[@TechnoDad]

For that price Pioneer could have done something different...

[@ivanstragan]

The new Pioneer CDJ3000 just released. Will you be comparing both Pioneer & Denon models?

[@TechnoDad]

Hello Ivan, I was not planning on buying a CDJ3000. If I were to compare products, it would be products that are in the same price range, which would be the CDJ900NXS vs the SC6000.

[@irishpaddy555]

Techno Dad i like your thinking.👌👌😄

[@kaislate]

@@TechnoDad The CDJ900NXS is the most plastic feeling jog wheel ever. I scroll the job wheel and I' said "gross" out loud at the icky cheap feeling. If you want club standard from 2005 go with Pioneer, but there are no clubs any more so... Club owners will unfortunately just buy whatever is next from Pioneer and Pioneer knows this. A whole lot of DJs would have to demand Denon for that to change. I don't see that happening. Now having said that. Denon is playing the long game. People that are breaking into pro level and buying their first multi-thousand dollar setup are going with DENON now. Eventually, this will permeate throughout.

[@1djatwork]

Could you possible give me some advice. I am thinking of starting some new dj mix videos on KZbin... What I would like to know is... How can I do this without getting copyright strikes and my mixes getting took down.? Any help would be greatfully appreciated

[@TechnoDad]

Hello Christopher! I have an account with Epidemic Sound, which has a lot of royalty free music. They aren't super long tracks, mostly 2 - 3 minutes long but will not hit copyright issues on YT. For my DJ stream, I use regular tracks and sometimes the video gets blocked, but you can mute the audio for those tracks so your mix stays live on YT. Here is my last DJ Stream, start around the 5 minute mark - kzbin.info/www/bejne/j6m4fJWkfKdlpJI

[@1djatwork]

@@TechnoDad thanks for the reply. Is there any license you can get to play any music on KZbin without ever getting copyrighted.? And can I earn money from the mixes on yt.

[@ONEHENDRIX]

Can you review the SC6000M?

[@TechnoDad]

Hi! I got another SC6000 so I probably won't be getting an SC6000M.

[@vasudevaggarwal9192]

Sir can i cast from andoid to Denon AVR X2400H Or is there any way i can stream netflix or prime video on the AVR .

[@harkisingh]

Vasudev Aggarwal I don't think you can, I use a nvidia shield to stream Netflix which is connected to my Denon avr.

[@TechnoDad]

I think the only services you can stream with the AVR is music like Spotify, Tidal, and that kind of stuff.

[@qwerty1234567973]

What is that track at 17:30?

[@bboymac84]

You know what would be cool...if you can hold shift +Play to stop the other deck simultaneously and play the other deck. This would be great for transitions!!

[@TechnoDad]

That’s a great idea Mac! Having a way to press play on layer B while having layer A on screen.

[@bboymac84]

@@TechnoDad yea it’s funny how they didn’t come up with this idea if they are going to do dual layering

[@TechnoDad]

Yeah, did you see the leak from Laidbake Luke’s IG story? Looks like they are working on a “slave deck” to control the other song. Pretty cool idea, but doesn’t help unless we spend more money.

[@kaislate]

This is a feature of Virtual DJ and works great on the SC6000. I've used two Numark controllers hooked up to VDJ to have 4 physical decks. The deck shift button can work either way in that scenario and definitely helps shortcut,but with having 4 physical decks anyway in that instance it really only alleviates the need to reach.

[@kaislate]

@@TechnoDad I'm not sure they are going to price them less than $549. You can get an SC5000 for less than $700 so thats prolly a better way of going. Chances are in a month the SC5000 will be even less.

[@ranibearsilva5883]

Would a 0.5 metre digital cable be long enough?

[@TechnoDad]

That’s tough, since the digital inputs are on one side of the mixer. I would go with at least a 1 m

[@OneBadAssDJ]

20:51 what happened? Why did it just freeze like that?

[@TechnoDad]

Lol! That was me pressing play/pause on the wrong layer. It’s not easy to DJ with only one deck, but I have gotten better - kzbin.info/www/bejne/j6m4fJWkfKdlpJI

[@TheEnd10026]

Can this be done with the sc5000

[@TechnoDad]

I think they have dual layer on the SC5000 as well.

[@petrfila5371]

Hi Techno Dad, thanks for the video. One question: if you connect the decks to the mixer via the digital ports what are those network connectors for then?

[@TechnoDad]

Great question Petr! So the digital in/out is just for the audio signal. When you connect the ethernet from player to mixer, that allows the mixer to lock in the BPM from the player. This is super handy when it comes to BPM based effects on the mixer. Also, when both decks are connected to the mixer via network, your second deck shares the music library with the deck connected to your hard drive or USB stick.

[@pwiggie2701]

quick question, is the screen touch resistive?

[@TechnoDad]

I'm not sure what that means...

[@pwiggie2701]

@@TechnoDad as in, does it work like an iphone screen, or do you need to press down into the plastic for a response from it?

[@BlueHawk80]

@@pwiggie2701 like an iPhone/iPad = capacitive multitouch :)

[@pwiggie2701]

@@BlueHawk80 ooh okay, thanks!!

[@jpburguete8466]

Press shift and layer to have both waveforms show

[@TechnoDad]

That must be from a new update!

[@mark_spit7839]

How the heck do you use the pitch with 2 layers?

[@TechnoDad]

Just like normal. When you change layers the pitch doesn't change.

[@mark_spit7839]

@@TechnoDad What I mean is; let's say you bring in your first track on layer 1 at +2% and then switch to your second layer for the next track, but it has to be at -1.5%. You slide the pitch to -1.5% while layer 1 remains locked to +2%. I'm curious what happens if for whatever reason you have to switch back to layer 1. The Denon doesn't have motorized pitch faders (as far s I know) so it won't move back into the appropriate position.

[@irishpaddy555]

Sean Brown yes... once you change layer moving pitch control... pushing the jog wheel... pressing the cue play button has no affect on the playing deck... just just have to make sure you are on the right layer...it gets easier with practise

[@renecyberspaced1286]

The RCA plug is around 30 Ohm. so kinda irrelevant if the cable is 75 Ohm ...

[@youngflyfella]

Denon makes pioneer look so outdated RIP Pioneer ⚰

[@TechnoDad]

It does!

[@djjas764]

New CDJ 3000 just launched. Hope now pioneer is not out dated?

[@clintz7147]

Rip pioneer ? Open your eyes and look around there in most clubs and festival's across the world. Pioneer has just begun you can keep your Star Trek Denon gear 😂😂

[@irishpaddy555]

Clintz clubs that are closed... festivals that are cancelled.. and not coming back anytime soon.. but hey...you keep buy over priced stuff that is more or less the same as the previous model👌👌

[@BlueHawk80]

​@@djjas764 They still are. And even more overpriced.

[@cjpeeton]

Pick different color to each layer . The mixer will show the colors as well on the cue button . Also if You did the colors , then You can't mess it up even if You have a different mixer . Visual feedback is very useful .

[@TechnoDad]

I thought the mixer would do so automatically but that's not the case. I have to change the color of the CUE buttons manually. Once I did that, it was a lot easier!

[@djgdogg1860]

Hey techno dad how do i get a horn sample on my serato dj pro program im using pioneer sx3?

[@TechnoDad]

What's up Gabe? Open Serato DJ Pro, at the top left you'll see a bunch of buttons "Horizontal, Flip, REC, FX, Horn Icon....click that Horn Icon and that will open up sample slots above your song prep area. Drag and drop the sample you want to use in one of the slots and you're good to go! Hope that helps.

[@djgdogg1860]

@@TechnoDad hello techno dad ist not letting me drag the air horn to sampler?? Can u please help

[@TechnoDad]

Gabe Salinas email me - Technodad55 at gmail dot com

[@djgdogg1860]

@@TechnoDad okay i email you!

[@miamichi5]

Don't like the new platter wheel. Don't like the green. Seems denon always had problems getting their jog wheels, platter wheels, cue buttons done correctly. They have changed their cue buttons & jog wheels so many times it's ridiculous! Best vinyl wheels were on the sc3900s. But their new clicking cue buttons will break down. Denon needs to finally get their act together on both the platter wheels & cue buttons. With that said. Love denon products. Mainly because the are affordable compared with pioneer DJ products & built to last quality. My 2 main reasons I like denon. Thanks good video. 👍

[@TechnoDad]

Thanks for watching! I don't hate the platter but I don't scratch or anything like that. I use the hot cue buttons at the bottom which is something that I started when I had the old DDJ-SX. I think I only really hit the Play button out of the two. I had the SC3900 a while back and didn't like the Engine software, but I think it's a lot better now. All in all, I'm stoked for this new setup and my second SC6000 arrives today. I've gotten better at the single deck mixing but it's just easier with a second deck. It's funny to see all the videos comparing the SC6000 and the CDJ3000 even though there is a HUGE price discrepancy. I was going to make a video comparing the SC6000 to the CDJ900NXS as the price difference is $100. That to me would be an apples to apples comparison. What do you think?

[@miamichi5]

@@TechnoDad hello, yes I agree. Personally if you got $2400-$2500 for 1 DJ device then you are doing very good my friend. I'm just upset that denon still to this day can't get their jog wheels & cue buttons done right. I think they finally got it right. Personally I don't like the platter wheel cover. It's almost a copy of the denon dn5000. Clear plastic covers with grove lines. But my opinion doesn't matter. Lol 😁! Thanks brother God bless. Good videos 👍!

[@kaislate]

Pioneer now has clicky cue buttons! I have no idea how people let them get away with this crap. (i'm assuming you mean PFL buttons) (also you can change the color scheme of each media player. waveforms stay the same though afaik no way to change those)

[@trhoda2001]

Mixing on one deck on thr Denons are not rocket science. Just build the habit of checking the cue point color of the live fader of the x1850 mixer before stopping the deck. Its dead easy.

[@TechnoDad]

I thought the mixer would automatically change the color of the CUE button, but I have to change it manually. Once I figured that out it was easier and I have done three DJ streams since this video - kzbin.info/www/bejne/j6m4fJWkfKdlpJI

[@kaislate]

Wait... why are we not linking everything via ethernet?

[@TechnoDad]

I didn't think it was an issue due to the fact that I'm just using the one deck. I did have two decks and the mixer linked up, but I just upgraded to a RANE MP2015. Here's what my setup looks like, fast forward like 10 mins - vimeo.com/506623518

[@djoscarvc2825]

Acá encontrarás todas las funciones de las Denon Dj 6000 y las 4 prime kzbin.info/www/bejne/qojJn6trlL6SqNk

[@DeeDee-lo5lr]

I own the set. Is not all that hype. Feels cheep and jug feels knob is cheep made and works halfway unless u buy the M series u can’t back spin. I hade the pioneer ddj sz and it work like a charm and the jugs and bottoms feels steady and responding. 200000% much better.

[@kaislate]

You can enable more backspin, but requires manual tension under the panel, just like the crossfader. The tension dial I don't think has a wide enough range. I don't know why anyone would have it any higher than minimum. Having said that, because of the shaping of the jog wheels there is a slight gap that is more prominent than usual and you want to make sure no crumbs fall in there. This is not as noticeable on the 6000, but definitely noticeable on the 5000.

[@DeejayWilly]

You are tooooooooo slow in mixing. u need to improve mate. keep your target on knowing what to do on the next step ASAP.