NEW Dewalt 2100psi 1.2gpm Pressure Washer Review Electric Power Washer

[@billytaglis3586]

I just bought this pressure washer based on your video and I really appreciate it and the fact that you listed where to get the other hose and connections.. I bought it directly from your link made it so easy appreciate it man thank you.

[@RS-ml2dk]

Does that quick connector work? It should be 1/4” male but the link is 3/4”.

[@GregoryWest-w1u]

I have the Dewalt 2100 PSI 1.2 GPM Pressure Washer. I use it to clean the vinyl fence and to clean concrete also to wash the car. I put a pressure gauge on my unit to check the PSI. With the white spray nozzle I typically see pressure readings of 1400 PSI. I use the white spray nozzle for cleaning the fence and it does a great job. The Yellow spray nozzle I use to clean concrete and typically I see pressure readings of 1700 PSI. The Yellow spray nozzle does a fantastic job cleaning concrete it is just slower than a bigger unit. I have seen the line pressure on my gauge go as high as 2600 PSI and the output pressure reading at the nozzle at a steady and amazing pressure of 2200 PSI.

[@Smokey63178]

Great Vid thank you. I am a 15 year Car detailer turned to motorcycle Mechanic. I took all my skills and added them to motorcycles.

[@jasondarla]

Thanks to this review I hit up my local Facebook Marketplace and found a unit for sale. I won't go into any details of my purchase experience but lets just say I scored a new warranty replaced unit from Dewalt for $70 CAD. One thing you missed about the handle is the locking tab which is inset on the plastic frame, excellent idea.

[@PappyGunn]

From a user's perspective washing an old muscle car, lower psi for the soap and rinse nozzles is good, so it doesn't get under light seals and covers or are too hard on trims. An adjustable nozzle is even better. Very nice review.

[@idratherberidingnow]

Success.....I know from reading many of the comments, that many of you like myself have wanted to make the gun a "Stubby" as Josh mentioned in his video. They might make one, however I couldn't find anything that would work directly with the OEM thread (14mm 1.5 pitch by the way). what I finally did was take the gun apart, remove the OEM fitting on the end. This is a 1/8 pipe thread, at this point you just need a reducing bushing. I went from 1/4 to 1/8, then added on the 1/4 quick connect fitting. Put the gun back together and it looks like it came that way.....minus the Teflon tape....LOL I shot a small video and will post it to my channel when I get a minute so you can see what the finished product looks like. Hope this helps a few of you out there and I would like to thank Josh for sharing his time and knowledge to the rest of us.

[@Buddy-sg8hd]

Thank you for the help and explanation I just don't understand why Dewalt couldn't have just manufactured the OEM on the gun this way in the first place smh.

[@idratherberidingnow]

@@Buddy-sg8hd Your most welcome and I wonder that often about many products.

[@jacobfisk9427]

i have been fighting this for the last few days trying to make it a stubby handle could never find the right reducer. annoying they have to make stuff difficult lol

[@idratherberidingnow]

@@jacobfisk9427 I left a video on how to make this a stubby. I have used it several times now. Works great

[@ChrisS-if7ev]

thanks for this. Sounds like this machine is a go then. Will pick it up tomorrow and tackle this within the next day or two. Thanks again! Cheers!

[@educationjack5730]

Bro you are the absolute authority on pressure washers. Love the videos

[@edmurphy671]

This worked perfectly for what i wanted. I have a pontoon boat and the deck is vinyl. The seam where the boat seats meets the floor is hard to clean with a brush and you have to get down on your hands and knees to do it. This thing worked great. Not only does it ckean well, but the nozzle reaches perfectly. I dont need a lot of pressure, just an easy way to clean cordlessly. I store the unit in a locked compartment and just carry the battery back and forth.

[@freeman6147]

Battery?

[@derpaderp6642]

Thats a lot of amps. Now im gonna have to add a 20 amp circuit to my garage. Thanks 4 the info man.

[@mini2nut67]

I recently picked one up on sale ($200). I purchased the the recommended Uberflex hose for mine. The kinky stock hose drove me nuts and is the only negative I have on this unit. It was obviously built to a price point. The suitcase design is a storage game changer. It should win an award. Excellent tip on the UberFlex hose!

[@stevelangsdorf7307]

Dude from this day on I'm not watching anyone but you and Apex,couldn't be happier ☺

[@help33etk]

Recently acquired this unit and so far super happy. I researched this first and price point is a premium for the clever design. The suitcase size, storage bin, and ease of use are major factors. It has an axial pump, so heavy everyday use isn't advised. And yes the hose sucks.

[@Speedstack21]

Are axial pumps prone to failure? Just curious

[@help33etk]

@@Speedstack21 yes, compared to an oscillating pump their life expectancy is about a third. It deals with the components and mechanical wear. I've now had mine half a year and love it. Handle is a awkward to put in and the nozzles fall in the storage part; otherwise love it.

[@Speedstack21]

@@help33etk thanks!

[@help33etk]

Still in use best to you

[@Drushkaa]

@@help33etk i got mine with an asurion 3yr warranty from amazon. Honestly having it fail naturally would be nice I'd just use the credit for a better one with oscillating pump! Thanks for the info

[@hfjeff2736]

Josh, just picked up one of these pressure washers after watching many many or your reviews and detailing videos. It has decent numbers and should be perfect for what I am looking for. Got the last one at my local HD. Already ordered the UberFlex, quick connects, foam cannon, and nozzle tips so looking forward to putting it to use on our cars. Thanks for doing such a thorough job on all these various brand reviews as well as the other auto detailing videos. It is much appreciated!

[@e46Kyle]

Jeff: did you manage to find a quick connect to attach your foam cannon to the trigger? I’ve tried, but ¼” is too small and 3/8” is too big. 😩

[@hfjeff2736]

@@e46Kyle I never found a fitting to put a cannon directly on the Dewalt gun and actually purchased a separate gun for the cannon. However I am getting pump surging with this setup so not sure if changing the orifice in the cannon would help.

[@k.beeler4240]

The max operating out-put pressure can be effected by the supply water pressure too. In a commercial setting you can have higher city water pressure than you would have at your home. I run an average of 55 to 60 psi in my house because it has a regulator on it. At my garage it comes straight off the water meter and there isn't a regulator for the 1 hose bib that I have down there and, that usually runs around 130 to 140 psi. Crazy water hose pressure too, I usually replace 1 or 2 garden hoses a year because I'm to cheap to buy GOOD hoses LOL... My electric pressure washer says it's a 1900 psi unit but, connected to the house I only get around 1600 to 1675 psi. At the garage, I gets closer to 1800. No, it still doesn't reach 1900 psi but you see my point. So for me it seems to make a difference. Thank you for the review, Have a good day!

[@everythingfordbronco3757]

DeWalt has now come out with a 3000 psi it would be great to see a review on that.

[@gambit1001]

Agreed, does the 3000 let you adjust the power to 2000 if needed? (Washing home aluminum siding)

[@lordtrini]

@@gambit1001 just step back

[@gambit1001]

@lordtrini right, while i agree that this can work, i much prefer to not exceed 2000 psi in some scenarios so as to not damage the materials that cant handle more pressure.

[@joevanseeters2873]

Very good and thorough review. That little DeWalt pressure washer looks IMPRESSIVE! Really well thought out, especially with that on-board storage, telescopic handle, on-board tip storage in the handle (which looks stout). And with the DeWalt name, hopefully it lasts like their other power tools which lasts for YEARS and YEARS! Very nice looking little unit. For a enthusiast just getting into more extensive detailing, this little unit would be perfect.

[@kidcruz]

great video quick question why do you recommend not using the soap tank

[@MrXyemoe]

Another 1.2 GPMb🤦🏼‍♂️🙅‍♂️ come on, enough is enough!!!!!! (Referring to makers and brands) you’re awesome brother, thank u for all your hard work

[@ddautodetailing]

I like how compact that unit is. Definitely a space saver. Great review as always 👏.

[@meneses120778]

Hace unos dias use una nueva de esas va muy bien .muy elegante y bonita .lo unico q note es q se calento mucho en muy poco tiempo .queria una y al usar esa eso fue lo unico q no me gusto y la use 20 minutos y la descanse ..pero si en realidad senti q se calento muy rapido

[@MarkSchuler5]

The PSI was low because you had the unit standing upright. Instructions say to lay it flat, as shown in figure A and B in the manual. This more than likely affects the pressure.

[@a-verybasic2]

Just received mine from HD. Your review is spot on. For sure the hose needs to be greatly improved otherwise seems to be a well built unit. Thanks for the nozzle data. !

[@Pettyh]

why dont you reccomend using the on board soap tank?

[@jaredhoover4096]

It would be cool to see a review update if you were able to make it a stubby and use it in your business.

[@Ss31994]

You can ! M14x1.5 female to 1/4 NPT male

[@tjac4801]

What advice do you have for someone using ceramic coating for the first time and what’s a good product?

[@ws6nick]

Old PW just game up the ghost and this one looks like a no brainer for me, Dewalt makes good stuff. Review gave me way more info than what I was looking for. Thanks!

[@imjoshv]

you bet!

[@richardmaxwell7441]

I’m the video you stated you don’t recommend ever using the built in fluid container, what do you recommend instead? Is their an attachment that works with the wand provided? Looking to mainly do sidewalks, driveways and exterior of home.

[@ldssggrdssgds6119]

Excellent review. This made me change my mind on this product...I'm going with the 2400.

[@leewinter28]

What hose would you recommend replacing the factory one with?

[@thestyleplaza4634]

please do a review of the costco husqvarna 3200 psi gas pressure washer

[@christopherjames5192]

I’m surprised to see you recommend the Uber flex hose with so many people on Amazon showing photos of it exploding, bulging and failing. Anyone know of a better hose??

[@DuBB900]

Just got myself one and it’s fantastic, I did upgrade to the Uber flex hose tho. But one thing is in the manual it does say to use the unit lay down. Awesome video!

[@randomrazr]

is the uber flex hose superior?

[@JeminixChaos]

What an awesome and thorough review. Ended up pulling the trigger on this one! This channel is so insightful, and this guy is very honest and positive! Hope this guy explodes on KZbin

[@williamgasque5624]

Nice review Josh. I'm thinking seriously about getting this unit. Did you end up keeping this unit in your shop? There are a ton of bad reviews out there saying that this unit has unexpectedly quit working but I don't know if it's user error or if there's an issue with the unit over the long-term. Do you have any feedback or advice you can give on the longevity of the unit?

[@monserratbriceno9151]

Wondering the same

[@vern0312]

Really appreciate this review. Was thi king about getting this unit to start my car detail business. 👌

[@kirstynsmith9177]

You didn’t add the link for the 1/4” quick connect to make the wand shorter. I found one on Amazon that will probably work though!

[@andersonjimmy1691]

Does it power cycle on and off every few mins? Like when in standby mode

[@bludika]

what is the quick disconnect that screws onto the tip of the spray gun? anyone got a link? is it just 1/4 female quick disconnect adapter?

[@TylerDuncan-e2t]

Have you done a review on the new 3000psi DeWalt? Great videos!

[@bubba8266]

Do you no what quick connect goes on the end of the wand for the foam cannon?

[@CuzzoKeoCampingAdventures]

Not sure why these arent available in Australia i want one we only have the 18v battery option damn it

[@ricklawrence3662]

When adding a quick connect to the gun to use it as a stubby, I can find a M14 female to 1/4”, but cannot find a M14 to 3/8” which would work with the included nozzles. Do I need to get the M14 to 1/4” and just get another set of nozzles? Thank you!

[@davestewart9146]

Looks like a great pressure washer, thanks Josh 👍😁

[@DSNYSANMAN]

Question, Can I add Quick disconnect to trigger and wand and still close storage compartment before I pull the trigger and purchased this power washer. "Quick Disconnect" is important to me.

[@poundermonster]

Great video, today I opened my DeWalt pressure washer, and after connecting everything and started to use it, multiple times the pressure went down for a few seconds, and then went back to normal. Is that normal?

[@thetacticalape8852]

I picked one up and really wanted to love it. The fact I couldn't easily convert it to a stubby gun killed it for me - not taking the chance of screwing it up and not being able to return it.

[@DownloaderVideo]

What do you mean, you were not able to find an adapter to do it?

[@thetacticalape8852]

@@DownloaderVideo There isn't an adapter for it. You have to remove the fitting and replace it with another. There is a video that shows what to replace it with. I found the video after looking for an adapter at multiple stores.

[@DownloaderVideo]

@@thetacticalape8852 I wanted to convert it without losing the ability to use the factory extension. I’ll keep it as I got it brand new in box for $150 so too good of a deal to let it pass.

[@carlosmateo3779]

Can you post a link to that Video I’d really like to convert mine to a stubby

[@jamesgates6134]

We need to know if you're able to use that pressure washer handle and what to buy to make it snubby

[@antoniomoya4625]

Great videos With you testing all kinds of electric pressure washer is it worth the money…. In your own opinion which one will you recommend the best

[@jimcarr908]

I haven't found any adapter for this DeWalt pressure washer. There's no adapter to make the wand shorter...

[@eyezlee01]

Just picked one of these up! Thanks for your reviews, helped me to decide go with the DeWalt v Greenworks for what I’m going to use it for. I’m off to your Amazon links for ultra flex because that OEM hose is really bad.

[@zeleznid]

What connection exactly do I need for the handle to use this as a stubby handle?

[@user-re5zg5bu3l]

I can't seem to find the correct adaptor to eliminate the gun extension wand. I want to make a stubby gun but not sure what adaptor I need

[@idratherberidingnow]

Any luck on this?

[@theurbanseekers4608]

I tried a 1/4 Quick connect but it doesn’t thread on all the way, like it’s too small. So I tired a 3/8 and it’s way to big so idk what it is.

[@idratherberidingnow]

@@theurbanseekers4608 see my post below

[@davetigue6155]

I have a solution and made a quick video. M14x1.5F to 1/4" M npt adapter kzbin.info/www/bejne/qYWQo2afe6iYl8k

[@michaelbush2322]

Metric M14 M14X1.5 Female to 1/4" Male NPT Pipe Fitting Gauge Adapter….This will work

[@gilbertchavez2819]

Does this same model come gas powered or just this model electric??

[@SauceE.428]

Can you make a video on which Generators you recommend for a mobile detailing set up? Thanks and great vid!

[@Centaur008]

Nice review, looks like a great unit. Love how compact it is; for the same price point as the Greenworks 2300, it pulls lesser but still good PSI/GPM numbers but it doesn't have that annoying delay, huge plus. I have more faith in Dewalt's reliability than Hart, Greenworks or Ryobi. Seems totally worth it, just wish every $200+ pressure washer came with an uberflex or similar hose.

[@timkinley1779]

You get what you pay for. Cheap pressure washers are just that... cheap. Imported units must come with a hose and trigger. Some kind of law.

[@arvindenorte3543]

Do you have the link of the quarter quick connect for the gun?

[@idratherberidingnow]

any luck on this?

[@nick34377]

tried getting a 1/4” inch disconnect npt male from lowes and the threads weren’t right ordered one off amazon will let you know if fits

[@adamscholl8110]

@@nick34377 I ordered the one I thought would fit off Amazon and the threads were wrong too. I cannot find the right piece and it is frustrating!

[@nick34377]

@@adamscholl8110 can you post link because if i got same one i can cancel my order

[@borealestate]

I want something to wash my pavers in prep for sealer. They are about 3 yrs old install. Also I would use to wash engine compartments and undercarriages that have oil and sludge. What PSI should I be looking for? Would this Devault be enough or should I go for that Ryobi you mention?

[@stevensimpson9809]

I like to see u review the canpump commercial pressure washer 1500psi 2.2 gpm

[@wolf-bv6lg]

Great bud. I’m debating about getting this or Adams washer. Which would you recommend?

[@ceedubb88]

What about storing the accessories with quick connects, will they still fit?

[@SantinoIsaac-w4b]

Excellent review. Very thorough. I know you said you don't recommend using the onboard soap container for cleaner deployment, why/elaborate? Appreciate you

[@SantinoIsaac-w4b]

Also bought uber flex hose and after market nozels different orifice sizes, no way I would tolerate hose it comes with. Great review!

[@imjoshv]

Thank you! Yes I never use the onboard because it contaminates the hose. For me as a detailer, I need to know that all the soap solution is gone and having it go through the hose could leave some residual behind. I prefer using a foam cannon so that the solution stays at the last point and after the clean water has gone through the hose

[@memoochoa3051]

Why do you not recommend using the soap dispenser?

[@Japanzhabu]

Where do you get the quick connect for the gun. It’s not 1/4” it’s somewhere in between. Want to get rid of wand for foam cannon. Where can you get that adapter?

[@randomrazr]

would u get dewalts other pressure washer with the bigger wheels?

[@joeyleroy6877]

Is there a hose to drop in a bucket with chemicals with this unit ??

[@travisparker3272]

looking at getting one of these, if i buy a 50' or 75' retractable hose so the unit stays in my garage will i lose psi pressure? also has everyone found quicktach fittings to use a foam cannon with this right of the gun without the long attachment?

[@armandoalvarez1990]

Can u buy ur own hose and attachment say u want a longer one

[@jr53d]

My has a issue that lost pressure when I press the gun 😢 .. please any help

[@younastin]

The high water pressure outlet has become stripped on my unit. Is that male fitting replacement available?

[@vernasweetpnw]

You said the Ryobi 2400 was your favorite but the picture and words on the screen are Dewalt 2400. Which one should I look at as well? Thank you. Great information.

[@christiandeinzer4136]

Bought the quick connectors recommended, however non of the work with the gun. Where you guys able to find the proper one?

[@chucksinger1916]

Love your Galaxy! Thank ya for the test

[@ECUPirate23]

@imjoshv Great video. Is there an attachment to allow me to add 1/4” quick connect to the front of the wand handle to make it a stubby with quick connect spray tips? Similar to the Mckillans design but with the DeWALT handle?

[@dannyboy1984]

Total stop and no delay seems like a big plus compare to the greenworks...

[@christiancordero4060]

Why do u recommend in not using the soap reservoir ?

[@adamkline4358]

Thank you for this review. MY QUESTION : why do you say not to use the soap dispenser on this unit? (I have a funny use case for a dedicated pressure washer. I use it to spray Dawn soap as an insecticide into a 45 foot tall avocado tree... Imy honda is rated at 3500 PSI but the chemical dispenser only works with the open orifice which is super low pressure (not sure why?!) and doesnt reach the height i need. I bought the dewalt 60V battery pressure washer you refview also. It's only 550 psi... its pretty heavy, weak, but gets the job done from a ladder... )

[@Pecola1FromScratch]

My understanding is it's best to use a foam cannon for detailing, because all the soap stays in the foam gun which can then be cleaned out, as well as easily taken off to not use soap. The issue with your situation is, if you use the soap tank with Dawn, but you ever want to wash without the soap (eg washing a car and don't want to use harsh chemicals that may be in Dawn, and instead prefer a ph balanced soap like chemical guys) at this point you've contaminated the pressure washer wand, and hose, so not only would you want to clean out the tank just in case to prevent soap from coming out (it should only come out when they is low presure, eg no nozzle or their soap nozzle, the black one) but you've also contaminated the hose with the soap as well. Using a foam gun/cannon instead, then you just detach the cannon and use the pressure washer as normal and there's no chance of harmful soap coming out, and no need to rinse soap out of the hose. So for your situation, it may not be as big of a deal if you never plan on using it on a car, or don't care to use dish soap on a car. But it's still a cleaner and easier to maintain option to use a soap gun instead of the tank. I'm not sure of the long term results of leaving soap in the tank, for instance, whether you'll need to dran and wash it out after each use, or whether it could sit for years and not have issues, but that's something to consider.

[@davids8493]

Clear and concise review. Well done and thank you.

[@brysonallen3203]

Awesome video, I may have to get one of these. I didn't see a link for the 1/4" quick connect that you talked about at the end of the video. What thread is it coming out of the gun?

[@ealeman71]

Same here... Anybody found the connector?

[@TamekaCrain]

What do you hook the water hose

[@JuanRamirez-di5tg]

What's the reason why to use the soup storage?

[@Gregoriosplace]

Good job. I don't want anything fancy, just something to clean my carpets and rugs. I sold my car since I moved to the city. No need for it with all the public transportation available.

[@willardivins3736]

This video finalized my decision to buy this unit, along with the quick connect kit in your links. It is a great little unit that travels well, and performs very well. I've searched for the 1/4 quick connect to make a stubby gun, but they come with NPT style threading, which doesn't match the threading on the gun. Can you please point me to where you got the quick connect for the DeWalt gun for the stubby configuration? Great channel, and thanks for the help!

[@imjoshv]

I’ve come to find out it a proprietary thread that they use. I’m still doing some research to find an option for that piece

[@willardivins3736]

@@imjoshv Ahhh, just our luck. I'll keep searching, too. Let's see who figures it out, first.... ; )

[@sergiomartinez8504]

Metric M14 M14X1.5 Female to 1/4" Male NPT Pipe Fitting Gauge Adapter…. This would work

[@ForeignCarRambo]

Can you link a good replacement gun and foam cannon please ? I’d really appreciate it

[@chrisdensmore-jn4vd]

@@sergiomartinez8504 does not work. I tried all kinds of connectors the threads don't match

[@shanejorgenson2059]

Will that run on a gravity fed hose from a storage tank

[@ForeignCarRambo]

Just bought this pressure washer for my new mobile detailing company will be upgrading to uber flex hose would also like to get a snubby gun for it

[@imjoshv]

Just get quick conencts and you ll be able to swap it all out fast and easy!

[@Fryloch75]

I have the greenworks 2300, great foam and powerful but, it's garbage. I'm on my 3rd one... Considering going with the dewalt 2100, curious how it foams🤔

[@hugoboshh2890]

how can i make it stop making my house brakers switching off??

[@Yoooboijohnny]

So I’m guessing doesn’t come with a hose for the water source ?

[@bloatedtonydanza7798]

Bro, not one pressure washer comes with a garden hose. You hv to buy it…

[@steve_main]

So the only issue that I see with this pressure washer is the storage of the wand parts. You mentioned using a quick connect kit with it so you could use a foam cannon with just the handle and you don't have to have it at the end of a 2 foot wand. Have you tested that all the hand wand and parts will fit back into the unit with the extra length added to them? Looking at mine it seems really tight and I don't think it will fit back into the storage compartment. Are you able to verify this works?

[@steve_main]

FYI, they don't!!

[@chrisault2004]

I know this video is knocking on door of being a year old, but did you ever end up using this in your business and how did it do? I have all Dewalt tools and am thinking about getting this for the garage detailing set up.

[@MAI-le1wn]

Is the DeWalt better or the greenworks pressure from Costco better?

[@rave2173]

When i store this for winter in my shed can i use pump saver with this to winterize it like i do with my gas powered unit?

[@ralphserra5822]

I’m looking for a pressure washer for home washing. Would you get this dewalt unit and use the Uber flex hose or get the adams 2.0? It’s on sale this weekend. Thanks. I love your videos.

[@Haulinglife]

Is it better or how stronger is it compare to ryobi 1900 psi?

[@tylerrice4611]

To make this a snubby gun is it just a 1/4 inch npt female qc?

[@petes_mk8r]

No. No one seems to know what the correct one is.

[@nick34377]

in order for a quick connect to work you need to take off the thread with rubber seal and put on a 1/4-in x1/8-in Threaded Male Adapter Bushing Fitting. You can get it from lowes or HD. Unscrew the gun and it takes a lot of effort to loosen the fitting. After that than any 1/4” quick connect to female fitting will work.

[@bts1111]

Hi Josh, thanks for all of your informative video's...I picked this unit up along with hoses you recommended...very happy. Question...Did you ever figure out what quick connect tip fit on the end of the gun? You mentioned but did not confirm what size outlet quick connect would fit on the gun. I tried a typical NPT to 1/4" and it did not work...any help or advice would be greatly appreciated. Thank you.

[@daveramdas1693]

also looking for this

[@chrisdensmore-jn4vd]

I've tried all kinds of connectors none of them work. Just got a different stubby gun and Uber flex hose

[@YorgiosXai]

What about the soap function!?!?

[@oneice7118]

Compare This to Husqvarna 2000psi witch one you recommended

[@chrismoore1177]

Great review, went and got it based on this review love it… However the recommended quick disconnects when added to the hand grip do not fit inside the carrying case 😢

[@imjoshv]

Thanks for the info!

[@e46Kyle]

@chris What size quick connect are you using on the outlet side of the trigger? I'm finding that ¼" is too small and 3/8" is too big. Can't attach my dang foam cannon.

[@sandy1387]

Is this pressure washer better than the active?

[@mike-tt4mo]

hi what size quick connect fits the power washer end of the gun thanks mike can't seem to find one that fits

[@steve_main]

17:53 - Just FYI I have tried to find the 1/4" quick snap adapter for this handle and this connection point is not a standard thread. I went to home Depot and tried all their 1/4 quick snaps and they are all 1/2 threads and it looks like this is 5/8 thread. If you buy a standard 1/4 quick connect it will not work with this.. I'm still looking for the proper 5/8" female to 1/4 quick connect

[@Julio159951]

Did you find it? 😅

[@steve_main]

@Julio159951 Nope told them also at help desk to stop using proprietary parts when standard ones work