Dewalt 3000psi Electric Pressure Washer | FULL REVIEW and TEST

[@espiloko4272]

Off topic but got the mjjc foam cannon and got to try it out yesterday and it made such a big difference in the way I wash my cars

[@dmcdayton]

Great channel, thanks for reviews. Ex equipment rep here, that ramp up you mention most likely serves to keep the start up amp draw low. We used to lift up the 2HP electric motors on belt driven paint sprayers to create some slip and keep them from tripping 15A breakers during initial pressurization. Once the line(s) are at pressure, the pump doesn't have to work as hard so tripping the breaker not as big a concern.

[@colinbeckstrand2612]

Ramp up is also really helpful for mobile detailers using gas or electric generators that can't handle those big start up draws.

[@chrisstach9145]

This guy is amazing. Totally worth listenint to the entire video. I see so many bad instructional videos and this person is by far my favorite so far. Thank you for your videos.

[@alpsulker8678]

I bought the hose you mentioned at Walmart. It's 30 feet and was branded Hypertough. Very nice hose.

[@imjoshv]

I wonder if they use different brand names between stores.

[@alpsulker8678]

@@imjoshv I have no idea. Maybe the brand was changed recently.

[@nicholasborrelli7544]

Pretty sure you just bought the wrong hose...

[@alpsulker8678]

@nicholasborrelli7544 I just looked. It clearly says Uberflex by Propulse on the hose. Walmart can change suppliers at anytime 😊

[@carbonlord]

Would have been nice to see it next to the 2100 just to see size differences, along with a VS. segment:)

[@dansuess4859]

Very good review as always Josh. How do you think this would compare with the newer Greenworks "industrial' models with the triplex pumps? GPW 2500C, GPW 3100C

[@willperri7676]

I’m from Canada I watch all the reviews you do on different products. Can you do a review on the giraffe retractable vacuum?

[@HARLEY05FLHT]

Hey that proprietary thread connection may be (BSPT) British Standard Pipe Tapered which is very similar to NPT! I found this out with my connections on my PCP air pistol pump!

[@AndrewShively-bk8no]

In comparison to the 2100 PSI which would you pick over that or the Ryobi 2000 psi?

[@ericm1462]

Does the foam cannon bottle allow you to put a different head on it so you can still store it but use different head

[@KaveerGoofyChannel]

You really should try the Generac 3100 PSI 2.4 GPM Residential Pressure Washer with PowerDial Gun pressure washer from Bj's its a amazing price at only $240 bucks. I have had it for almost 2 years and still works great.

[@LeftTurn72]

Hey Josh, I’ve recently been binge watching your videos since I’m looking for a pressure washer for car washing and occasional light use around the house. I’m going with the Ryobi 1800 psi unit (RY141802), mainly based on your videos. Your “Cheaper foam cannon” Amazon link in the description doesn’t work. Which foam cannon is that? Thanks!

[@JoeAndMattsDetailing]

My friend purchased the same machine he took it back. I used it. We did not like it for that price. Did you have a better hose and better quality machine?

[@imjoshv]

No the hose isnt great rthat comes with the unit. I think it performed well but at $450 I do think there are better options

[@mikeworkman1759]

​@@imjoshvwhat would you recommend?

[@skygreen5939]

the new DCPW1000 might be worth reviewing, in case that one's not on your radar yet

[@imjoshv]

It wasn’t… thank so much!

[@dantegiuliano6604]

I am about to go buy an electric power washer ASAP. What is your top recommendation for an electric power washer for home use. Cleaning fences, concrete, decking, washing cars and power washing siding on a two story house?

[@teamgods-stars2446]

I'd check out the Westimghouse wpx3400e...

[@williamibarra5965]

Super useful and detailed video. Great work

[@tonyhartley1747]

Enjoy your review videos. When do you think you'll get your hands on the new BigBoi Pro for review?

[@CAPTJ696]

So Bigboi just raised washerpro price from 629 anniversary price to 719 wow. I jumped off that train wow

[@timkinley1779]

@@CAPTJ696 wow

[@CAPTJ696]

@@timkinley1779 it's probably out of my range now

[@timkinley1779]

@@CAPTJ696 I was poking fun at your for typing 'wow' in back-to-back sentences.

[@sethlover6498]

i own the 2100 psi unit on a rollable vulcan welding cart... like you built josh... its great... does the job nice... maybe this would be a nice upgrade and fall right in the same place i have the 2100 mounted... hmmm...

[@TheMemeXp1]

On the same page as you are, are you able to wash siding with the 2100?

[@sethlover6498]

@@TheMemeXp1 vinyl siding on my house I have on the first floor. Chemical is the most important part. Second floor from the ground, produced less than desirable results.

[@TheMemeXp1]

@sethlover6498 well as long as you have a ladder it should work right? Trying to decide if I should go for the 3000 psi version

[@sethlover6498]

@@TheMemeXp1 yeah the days of a ladder are long gone for me. I am just too lazy lol lol. But yeah on a ladder, work small areas, would be good. It is actually an impressive power washer for the psi and it being electric.

[@TheDmgmonster]

@IMJOSHV this thing had fantastic numbers! As did the 2100 in your review. 1. At the end of this video you suggest the 2100 but on the 2100 there is no foam test 2. It would seem with such great numbers this machine would deserve maybe an investigation video to troubleshoot if these washer can get to the desired foam production?

[@mariosamoeil9287]

Hey Josh I have the 2100 psi dewalt pressure washer and the older MJJC pro foam cannon. Do you know if there's a quick connect i can use to not have to dangle the foam cannon all the way at the end of the wand and just attach it to the stubby gun? You would help a lot!

[@walterskurski1337]

The adapter to make it into a stubby is a metric M14 Female to1/4 male NPT it’s on Amazon. Not cheap $15.98 + 10.98 shipping. I Only seen 1 seller But it works great. Been using it about a year

[@Alex-d8y5d]

Josh, what if the soap was diluted big time when using it with the stock foam cannon due to all the water that was injected in to it. Maybe do a retake with fresh dilution see if it works.

[@TheGabrielStudios]

Wow the foam issue it is very weird! I recently bought the Ryobi 3000 1.1gpm that you reviewed and also bought an Amazon “Realyou” foam cannon and comes with the 1.1 screw-on orifice and that thing makes real thick foam out of everything you feed to it! I even makes foam out of the red engine degreaser (I don’t use it for car washing, don’t freak out 😂) and degreasers are not really that frothy when you agitate.

[@sherrylynn1519]

Thanks for your video Josh. What would you recommend for cleaning my concrete patio and patio furniture. I wouldn't need to wash my car or anything. Just the patio. But I really need electric. I don't want to mess with gas and oil. TIA if you can help me!

[@johnniejohnson8026]

Another great video Josh but if I am going to buy from DeWalt I would go with the 1500 and Walmart also has a 35 foot hose from black max (uberflex)

[@coreymerritt7742]

Thanks for the test josh on another topic giraffe tools has a 3200 psi with a 65 foot hose 1/4 hose reel on Amazon 180 Cdn might be have decent if the hose is crappy I would certainly switch to the Uber flex

[@joegarcia9082]

They also came out with a new cordless power cleaner at 1000psi. Haven't found anybody that's done a review on it yet.

[@bstewartexecutivecarcare3797]

Pretty fantastic? It sure looked subpar in the video. For the price it looked disappointing to me. But I thank you for the video 👍✌️☮️

[@santi8751]

I think checking the amperage while using the foam canons in smaller orifices should be tested aw well I seen on obsessed garage some units would spike over 15 amps on a smaller orifice foam canon

[@tunblimbli]

The adapter I got and works perfectly is this. Metric M141.5 Female x 1/4" NPT Male. Hope it helps someone, took me a while to find.

[@bajasvt]

M14x1.5 is the thread out of the gun?

[@ruthann8111]

QUESTION: Between the Dewalt 2100 and the Greenworks (electric), which has the best quality of the materials that the unit is made of? I can only buy one. Which one? Thanks ~ great reviews!

[@vstamato]

Hi Josh, I got this at a REALLY good price so I picked it up.. How do I get this thing to make better foam? Any ideas since you make this video? Thx.

[@IsaiGuzman2315]

Y did u not use the hose u advertised will the psi differ with other hoses or was the test biased simply because you possibly got sponsored

[@imjoshv]

Man I wish I was sponsored by dewalt or Home Depot. I’ve done tons of test and the length and diameter of hose doesn’t reflect any change in psi or gpm for the short tests. I’m sure it would show a difference over a prolonged period of time but not for the 1 minute

[@imjoshv]

I actually use to always show the uberflex as well but then people would get mad that I didn’t use the factory hose hah

[@mcglode]

Hey Josh! I hesitate between the 2100 and the 3000 which one is best for car detailing in your opinion? did you test a foam canon on the 2100? tanks

[@55azguy]

I have a question, a can of spray paint released a fine but noticeable tan paint on my white door of my Highlander. What is your suggestion. Thanks for your reply.

[@richsmith3120]

Acetone

[@imjoshv]

Yep acetone or even goof off will work. You can also clay it but using the chemical will be faster! Just make sure to rinse and apply protection after

[@nicklouallen4784]

Some waxes will remove paint from spray cans. I use to get a wax/polish from a independent maker that we used on everything from paint,rubber,glass does not leave white residue. It would remove spray paint. Still use it some.

[@coolestman69]

Check out the active 2.3 now in reference to this. 2.3 gpm and under 15amps apparently with 1100 psi

[@MikeMJCW]

Great review! I have this exact unit with a Zwift (MJJC) foam cannon, and it makes thick foam. Go figure. I use a Ryobi hose instead of the stock Dewalt hose. Could be something there?

[@samadm.g.1663]

can I connect the nozzles directly to hose without handle?

[@timmasters4893]

Can you try this unit again with the hoses and gun that you would use for car cleaning and see if it changes in any way?

[@imjoshv]

Hi I actually have and the 50’ doesn’t change anything!

[@timmasters4893]

@@imjoshv Thanks Josh - Not sure if you have done it recently - but looking for your recommendation for best all around electric pressure washer for combination of GPM and Pressure for different applications.

[@michaeltobler649]

HELP! I am retired and like detailing my car, you have given me so much helpful information...but I am really struggling with purchasing a pressure washer. I plan to create a nice detailing area with shelf, hose reel etc. I have probably watched too many of your pressure washer videos and have "Analysis paralysis". My question is it really worth paying $350 for an Active 2.0 to get that 2.0 gpm, when I can get a $100-$200 pressure washer and get the correct spray tip orfice to get me that 1.3-1.7 gpm?

[@AnthonyEsposito-w1u]

I ordered one last week and it died after only 1 hour of use, it was returned to Home Depot the same day. I wound up using a 2 year old compact 2000 psi Ryobi for 3 hours straight to finish the job.

[@btbd2785]

Wow! Died after 1 hour? Go figure!

[@AnthonyEsposito-w1u]

@@btbd2785 whats worse is that a $120 mini Ryobi had to finish the job.

[@TheMemeXp1]

I just bought the 2100 one today;( should I upgrade if I want to do siding and decking?

[@mikeworkman1759]

What did you end up doing?

[@pasolsvargas4531]

What do you pick ryobi 1900 1.2 or that Dewalt 3000 for car detailing?

[@pinoysiaki]

What is the ga of extension cord recommended for this unit? Thanks.

[@RadiatedJay]

I just bought a 3000psi washer with 1.1gpm.... what size nozzles would you recommend to use in a dual nozzle surface cleaner?

[@evilfingersNo1]

Wow, Josh, you sure put a lot of effort in removing the hose from its location when you could've just simply pop out the locking pin and swing open the arm that held the hose in place, but hey, you got it out 👍

[@MariaSanchez-oz4zi]

will you be doing a review on dewalt cordless 2x20V DCPW1600Y2 I was wondering if you thing that would work to wash a car before the battery die

[@noahgomes1341]

What about the stats on the turbo nozzle? Psi?

[@enforcedwolf643]

Any words on the MJJC foam Cannon Pro v3 coming out yet?

[@leonardcisneroz8258]

What is the best way to go for yr home..yr cars ect. Gas or electric?..nothing that's cheap but great machine to buy

[@AmberOfficialConner]

Finally, a pressure washer that can handle my messy yard and my questionable DIY skills!" 😂🌊🔧

[@imjoshv]

Haha

[@tonyST2024]

Cuál pressure washer recomiendas para empezar

[@jingleheimershcmidt2]

Does this use batteries or an electrical outlet?

[@ronin_11b94]

Is this better than the Ryobi 3000 psi?

[@j.g3451]

Hey Josh or anyone else. I need help with a decision. between three pressure washers. Greenworks, Dewalt or Ryobi (3000psi). which one could be the best decision? I need to make that investment in my new house.

[@CaliforniaCasey]

Great content!

[@imjoshv]

Thanks!

[@gauravjeet2181]

thx i was abt to buy this now will buy the ryobi frm u r link

[@alexandercroes4647]

Also inclosed battery overheats after 5 minutes . So even you have battery capasity for one hour . In reality you can work only 5 minutes .

[@michaelnsparrow]

Picked up the 2100 today. What psi gauge is that?

[@imjoshv]

I got it direct from the mtm website

[@alexandercroes4647]

Is it AC / DC ? ALTERNATE PLUS DIRECT CURENT ?

[@jettangeles2707]

that foam cannon is the same foam cannon that came with my mastercraft that's like $120

[@williampinchbeck4321]

Thanks Josh

[@libertarian1637]

As a plumber Teflon tape is not “always” recommended and shouldn’t always be used. Teflon tape or other thread sealant should only be uses an thread sealing connections; any connection made with o-rings, a sealing washer, a flare connection, or crush washer should NEVER have a thread sealant used, including Teflon tape as they can actually interfere with the seal or eat through the sealing device.

[@dack4dust856]

Do the greenworks 3000 next

[@timkinley1779]

You do it.

[@chrism1157]

What do you do with all these pressure washers and gadgets after your reviews? You would need a warehouse if you kept them all. :-)

[@imjoshv]

I know its crazy. I give alot of them away

[@guyhickey3343]

Fisher price 😂…my kids would love this..

[@BlackIcee808]

Hey can you renew the new DEWALT 60V MAX 1000 PSI Power Cleaner they have a new one and they have Dewalt DCPW1600Y2 2X20V MAX* 1600 MAX PSI** Pressure Washer Kit with FLEXVOLT

[@Krafty1620]

For $500, if it says 3k psi, it better do 3k psi! I have the Dewalt 2100psi version and the Ryobi with same psi rating is much stronger. Makes me question what my 2100 dewalt is actually putting out?!?

[@naplesnative2394]

In ALL your videos…, you never show the spray coming out of the wand. You always have it just off the side of the camera. People want to see the spray action. Numbers are at the back of the bus for us.

[@jeffdiaz2000]

Why not just take the nozzle out of the bucket and do the dB test? Id est, spray driveway while standing or aim it anywhere water jet isn't going to ricochet noise back into your mic.

[@justplanefred]

seems like we are getting into Active 2.0 territory on price...

[@eds1990sporty]

😮 the one at Walmart is 35 feet cost is 37 dollars

[@DragosDetailing]

First ❤

[@imjoshv]

Nice!!

[@allenph2005]

Can i use a 15" surface cleaner on this machine to clean my driveway?

[@btbd2785]

only 1.1 GPM??? So disappointing yet again especialy from a reputable brand. More and more today I see brands like this produce and market an item like this as professional. Yet tthey make one worh 3000psi and 1.1 GPM and a low quality hose to.boot. This is not a "professional unit" dont care if they asvertise it this way. Its a HUGH problem today and it PISSES ME OFF!!

[@Jimmer-Space88]

Yep, it’s easier to adjust the the orifice to get the pressure up that it is to build a quality motor capable of actually pumping the water

[@rickysweet1036]

3000psi at 1.1 gpm is the highest it can go for a normal 15amp outlet so ur not blowing ur breakers

[@Jimmer-Space88]

@@rickysweet1036 not so sure about that, I have the new Westinghouse 3000 psi that advertises 1.76 GPM. I find the GPM varies between 1.7-1.85.

[@btbd2785]

​@Jimmer-tr6bi it's not so much the 3000psi it the 1.1 GPM. They could have also provided a better hose.

[@btbd2785]

​​@@rickysweet1036 You still would not want to run this on a 15amp circuit. You would really need a 20amp.

[@1244taylor]

For the money, a POJ

[@stephenlouden480]

425$ nooo thanks rather have a Ryobi 1800 or Karcher k1700 or greenworks for 100$ for 450. get the Active 2.0 and spend 100 on a uberflex 50 ft hose and stubby gun.

[@brucey5585]

I rather just use a regular hose.😂 $20.

[@ThanksForTheLaugh]

Cheap hose and foam cannon, I assume the internals are built just as cheap.

[@TwistedOff]

👍

[@1spitkitty]

Stick with the Ego unit.

[@joesnow5584]

Funny how you did the same review 2 years ago when it had a terrible hose. Now it has the same terrible hose. I guess Dewalt doesn't watch KZbin. So this unit is going to cost you another $50 to get a decent hose to replace Dewalt's Playschool stock hose. I'll pass.

[@GladysEmms-h1g]

Hortense Overpass

[@HelinaRita-r6e]

Katharina Junctions

[@richsmith3120]

Very expensive PW but crappy accessories. Its a pass.

[@imjoshv]

The Wand is cool but the hose is bad. I think iits a cool ubit but $450 is too much

[@richsmith3120]

@@imjoshv Agree

[@markg7762]

dump ass there was a latch for getting the hose out

[@APEPV3]

Absolutely NOT worth the money!

[@2020Tundra]

I stopped the video after 5 seconds when I heard “1.1 GPM”… sorry, not interested.

[@seropserop]

Might not work for your needs but this is exactly what I was looking for.

[@seropserop]

Also it’s a 15a machine which means you can get much higher GPM using a bigger orifice, you’d know that if you didn’t stop the video after 5 seconds

[@seropserop]

Both 3 and 3.5 orifice nozzle gives you a great 1.75 gpm with 1200 psi

[@2020Tundra]

@@seropserop But I already knew that without having to watch the rest of the video so why waste my time? My Active pressure washer already gives 2GPM without having to manipulate the orifice size.

[@JiMmY-fm9xq]

1st!

[@SOVEREIGNDesigns]

put it up against the greenwrks pro3000

[@YouMISSED-s4e]

Will a surface cleaner work with this unit?