That bumper looks awesome. I think that's the one I going to buy for my 2022 sr5 4x4 midnight black metallic tacoma.
@RobMotive Жыл бұрын
Best one out there for the Tacoma IMO👍
@RussellMorash-m8w Жыл бұрын
I always carry a 10 mm and a 16mm I found they do almost every major bolt on thr outside and inside I know the 10mm is right but I'm not sure about the 16mm it's cold out and I am in short and a t shirt so I don't feel like going out and digging in my bins to find it if you read this I don't mind being corrected.
@chip9177 Жыл бұрын
I think the Cali Raised bumper comes with brackets so you can keep the hidden light bar. Will be the way I go.
@RobMotive Жыл бұрын
I’m sure I could have rigged it, but no need with the setup this bumper has👍
@davidrahbany Жыл бұрын
The other advantage of the pricier Cali Raised LED Stealth bumper is that it you can cut the original bumper plastic below the bevel. This mates the steel bumper to the plastic more cleanly and without the need for that add-on trim piece, which seems like an after thought from the Body Armor engineers.
Now you should change that rear bumper to go with your front bumper and sport bar, that would look really good.
@ryannewazada2102 Жыл бұрын
Aloha Rob. This was a tedious modification that requires patience and accuracy to your latest installation. You took your time to ensure that you installed it correctly with great steadiness. The installation to your bumper on your Toyota Tacoma looks awesome 👍😎❤🎉😊😊and mean. Great job to your video 👏📸 installation Rob.
@jefffielder2429 Жыл бұрын
I have a question on the power commder affect the warranty from Toyota
@RobMotive Жыл бұрын
Have a look at their website. They discuss warranty there👍. www.pedalcommander.com
@laoregon989Ай бұрын
How many pounds is the bumper? do the weights lower the front of the car? Thank you.
@RobMotiveАй бұрын
There is some weight to it and I’m sure the front lower a little.
@randomrebuilds Жыл бұрын
Looks like a sweet mod with the lower bumper. I might have taken a hammer and lightly tapped that trim strip to see if it straightened out or not.
@rudysilva3 Жыл бұрын
Why did you skip the actual bolting of the bumper??
@RobMotive Жыл бұрын
Not sure what you mean?
@rudysilva3 Жыл бұрын
at min 17.40 you go go from talking about where to bolt the bumper and the extra long bolt and then all of a sudden the bumper is on the truck and you never explained where the long bolt was placed or were to connect the lights. In my opinion you had a good video that you really cut short. @@RobMotive
@RobMotive Жыл бұрын
@rudysilva3 Given the tight quarters, there was no way to actually show the bolt going thru the hole. However, it’s very obvious in the directions. As for the wires, it’s connected to my Auxbeam switch that I’ve shown many times on channel👍
@LoriNance Жыл бұрын
Did the metal peices on bumper go behind factory plastic bumper? I know on the gray Tacoma you thought they were supposed to
@RobMotive Жыл бұрын
Nope, they do not👍
@Mikeislucidnow Жыл бұрын
"in other words I broke something" 😂
@RobMotive Жыл бұрын
What did you break?
@Mikeislucidnow Жыл бұрын
Just quoting you when you snapped a tab about a minute in.. Too funny
@Mikeislucidnow Жыл бұрын
@@RobMotivelooks great though brother nice job 👍
@RobMotive Жыл бұрын
Lol! Completely over my head!!😬😬
@kcassidy90 Жыл бұрын
Sweet
@371kenny Жыл бұрын
Viper cut it now
@kevinmeldrum1 Жыл бұрын
You know you have three of those relocation brackets 2 go up front and one relocates that nut.
@RobMotive Жыл бұрын
Oh man! It’s like a light bulb just went off! Thank you👍👍
@Snowman72-pv6cz7 ай бұрын
Rob I am close to dayton ohio where could I go help me put winch bumper on?
@RobMotive7 ай бұрын
No idea...I'm in deep south Texas.
@Snowman72-pv6cz7 ай бұрын
The reason I ask I thought u said while back u lived in ohio
@RobMotive7 ай бұрын
@DougSnow-pv6cz 6 years ago in the Columbus area. Not sure what you have in Dayton.
@michaeldesimone5633 Жыл бұрын
Will that new bumper work with a front receiver hitch? I have that due to a snowsport plow but I may not need that when I retire as I won't be plowing so I do like that look of your new bumper! TIA Also cost and link for that bumper?
@RobMotive Жыл бұрын
Not sure. You’d have to consult with the manufacturer to answer that🤔
@michaeldesimone5633 Жыл бұрын
Do you have a cost and link to the bumper you installed?@@RobMotive
@trackmhs Жыл бұрын
Looks really good to bad you need the license plate in Texas
@RobMotive Жыл бұрын
I know right!!!
@Langhorstiness Жыл бұрын
The license plate hides the empty hole for the missing fairlead for the missing winch.
@joefucilli2032 Жыл бұрын
Where are you connecting the light bar too?
@RobMotive Жыл бұрын
Have a look: Huge Change Coming for the Tacoma ft. The New Bumper! kzbin.info/www/bejne/d561qXeJg96Jba8
@joefucilli2032 Жыл бұрын
I mean the wiring for the lightbar where does it connect to on the truck? A fuse or to battery? Or?
@RobMotive Жыл бұрын
@joefucilli2032 Have a look: kzbin.info/www/bejne/bXvEhWSZasdpercsi=bBIDNJ6zAa5c8pnM
@jerrydiver629 Жыл бұрын
No way I could cut into my Tacoma. Just don’t have the guts.
@RobMotive Жыл бұрын
Oh I get it! Definitely a daunting task😬
@archiehenderson2744 Жыл бұрын
This is way out of my wheelhouse and pay grade. 😮
@RobMotive Жыл бұрын
Lol! Should definitely be done by someone else if you’re not comfortable doing the install 👍