NEW HOLLAND T8050 Tractor Plowing

[@billwellman7380]

That operator was doing a great job - it’s a lost art! Thanks for all the videos, your work is appreciated!

[@45Deere9500]

Still have a couple plows, but rarely use them anymore. The last time we used a plow, IIRC, was after the drainage ditch had been dredged. Dad plowed the spoil that'd been deposited on the ditch bank, farther out into the field. Largely did that to help keep the ditch bank from getting that much more built up/ becoming higher yet in relation to the rest of the field. It's kind of a back up tractor now. We got started with NH tractors (all were/are MFWD) when we rented an 8870 one spring, to pull the field cultivator. It was a brand new tractor, and the Genesis line was only a year or two old at that time. I don't remember if the NH came first or second, but we'd also rented a JD 4760, brand new tractor at the time, again to pull the FC in the spring. Come the third spring, we had a new 8970, with SS front end,to pull the FC in the spring, and run the chisel in the fall. It also ran the NH3 applicator and was the last tractor that we row crop cultivated with. The 8970 also has done grain cart duty, pulled the disk, and pulled grain wagons to the bins and local grain elevators. It has a DuAl loader (710 model maybe?) on it as well. With the SuperSteer front end, it took a little time to get used to the way the loader moves when steering. Next NH was a used TG210, with SS front end. Its main job was pulling the Kinze 2600, 16/31 planter. It also pulled wagons, and did chiseling in the fall. The next NH was a T8030, w SS front end. This tractor started mainly on the field cultivator, and chiseling in the fall. When we upgraded to a Kinze 3600 planter, that needed a third set of SCVs to run the compressor for pneumatic down pressure, it became the planter tractor. The TG 210 only had 2 sets of SCV, and left the farm. It currently is the NH3 applicator tractor (15 knife Blue Jet, 3point mounted bar), and grain cart tractor. It has duals on both front and back axles. To replace the TG8030 as the main tillage tractor, we got a used TG305. It pulled the FC and chisel for several years. Now it pulls wagons (can get 1300 bushel on the one set we have), is the tractor that runs the JD CX15 batwing mower, and is pulling the Great Plains CT 8300-60 flex harrow to knock down the ridges from chiseling, in the spring. It may also get hitched to the disk, if we need it in the spring. The final, and newest to us, NH is the T8-360, purchased used. It runs the FC in the spring and a chisel in the fall. It also has duals on both axles.

[@heatmoon]

Interesting thanjs for insight on why you use moldboard plows. We used a neighbor's 12 bottom DMI to put under pasture. They are rarely used up here in MN and ND because of the plow pan that is created. Just a lot more timely ways to till up ground. I worked for our local Water Resource District in MN and surveyed in this 6 foot of grass easement law, 6 feet from natural ground because farmers here have so much top soil they prefer to go get their top soil from the ditch bottom instead of using grassed waterways or erosion prevention methods. Banging survey stakes into some of the most valuable farm land in the world during planting always made me uneasy, but farmers were always helpful and would actually call before seeding so I could mark grass easement. That 6" from natural ground turned out to be 12-18" of grass. Such a waste of time, good intentions with bill language effectively castrated the whole thing

[@jeffreyhoover2105]

I never operated a new Holland tractor before .it's nice to see them using a molboard plow to loosen up the ground for planting the potatoes. Thank you for this video jason and the work you put into them thank for the orginal price tags that accompany each piece of equipment .

[@kygreenskeeper8326]

Been on a farm my whole life Jason... First time ever seeing a plow like that... Awesome

[@giuseppebacoccola9209]

Il migliore trattore al mondo.

[@georgestirewalt8508]

Tractors sounds so good pulling. Plow also doing a pretty Job. Plus that's some of the pretty's farm Land . I've ever seen. Good operator and sweet video. Thanks

[@bigtractorpower]

Thank you for watching George. It’s always neat to show plowing.

[@davidhaskins9457]

Love the old school moldboard plowing video and a blue tractor every now and then

[@noelhohberger1188]

My uncle's had a plow just like that. Doing a great job

[@miketaylor155]

I love farming and tractors. What a great life

[@lazeppelin1]

Another great video. Nice to see something other than green or red. My grandson enjoys your videos.

[@bigtractorpower]

Thank you for watching. I am glad that your grandson enjoys the videos. I like to cover all the brands. I like tractors. The next video should cover an orange AGCO tractor.

[@davidschollenberger6871]

We have a jd 4 bottom but didn’t use it for 20 yrs really nice fields there would like to see when they harvest the potatoes ❤

[@404nitro]

I always enjoy seeing the blue tractors on here. The super steer tractors always have a bit of an odd look to them to me, but the std front end tractors are very sharp looking.

[@Hinesfarm-Indiana]

Plowing is a thing of the past here in north central Indiana. Neat video 👍👍

[@markreetz1001]

Cool video, Jason! The coming off the potato planter sounded a little like an old "Johnny Popper!"

[@bigtractorpower]

It sure does sound like a John Deere two cylinder. This the Harriston picks grabbing the seed potatoes. It has a distinct sound to that planter.

[@markreetz1001]

@@bigtractorpower I'm glad you said that because I was a little concerned people would think I was crazy! 🤠

[@SimonKL11]

The t8000 series are neat looking machines👍😉 that plow does a very nice job😁👍

[@bigtractorpower]

They are good tractors. Good solid tillage and planting power.

[@Oliver66FarmBoy]

Must be nice to have ground so mellow you can plant right behind a moldboard plow without a finishing pass. Lol

[@jeremymullen5378]

🔥they ever have nice soil. Doing great job.. wouldn’t be pulling that plow in wet clay. Nice irrigation setup wow. 🔥👊🔥🔨🏍⚙️🚜

[@paulmartin8784]

We still do some plowing with a 770 IH 6-16s trailer plow an a 1586 tractor here in central MN

[@bigtractorpower]

Very nice. That is a cool plowing team I would like to film. I really want to find a 1586 to feature.

[@paulmartin8784]

@@bigtractorpower be fun to meet you some time

[@ScottPykare]

A plow with a harrow bar on it. Interesting. First time for that for me.

[@kenhurley4441]

Sure solves having big clods in the field!

[@jamieebersole6755]

We still plow with our Oliver plows. The one that gets used the most is a 4 bottom pulled with a Massey Ferguson 5811sl but if we want to play we get out the Oliver tractors to and occasionally the Oc-6 crawler

[@africanbeekeepers]

Fantastic machenary

[@noahater5785]

Wow, those fields are MASSIVE! 😮

[@alfredhitchlock501]

You’re a total tractor nerd 😅 Me too but I think you have me beat by a long shot. My name’s Jason too. I mean it as a compliment 😊 I’ve appreciated your videos for years now.

[@piperdoug428]

Just bought an 8 bottom WHITE plow to rotate our alfalfa stands with an oats stand to re-establish new hay stands

[@mattphillips4260]

they have that plow tuned right as rain to go plant right after it and not use any other tillage tool to smooth it out

[@shawnbeerens4292]

If you wanted 30mph you had to have suspended front axle. The super steer acle was super cool! I worked at a new holland dealership for 16 years. The engjnes in the t.8000 were cummins, and they sounded mean!!

[@michaelchapman9375]

Yep, the cummins engines sound tough as in the T8000. Better than the iveco’s in the T8’s

[@marvinmartinez1837]

Me gusta la maquinaria new holland son unas bestias de máquinas a gusto

[@happycanayjian1582]

Kinda neat to see a moldboard with a harrow bar which leads straight to a nice seed bed. Now I’ve seen it all…

[@jermynpedretti4761]

Did some February plowing with a 4 bottom Oliver plow behind a 1983 2-110 White preparing corn stubble for oats and alfalfa seeding Southwestern WI

[@samueljoejr5191]

This was interesting, thanks Jason!!

[@TimKrenz-j8t]

Nice video ❤😊 WE HAVE A FEW FARMERS STILL PLOWIN UP HERE IN MN ❤😊

[@TimKrenz-j8t]

Next weekend the 16th is the INDIAN NECK FARMS PLOW DAY !!! RED BIBS BILL AND ASHTON LEWIS WILL BE THERE !!!

[@TimKrenz-j8t]

I'm hopeful going to go All the way from LE SUEUR MN !!!!

[@stevangucu522]

You sound so refreshed. I thought this was a video from a couple of years ago.

[@johnclarkkitner9556]

That nice looking tractor.

[@joshuaphegley3766]

Awesome video!

[@bigtractorpower]

Thank you for watching. It was neat to feature this New Holland plowing.

[@Dave-nx6ps]

Love the Vids plz keep up the great work good sir !!

[@frankscruggs4749]

Good video.

[@ForzaCarCollector]

Are you interested in filming a 1964 Oliver 1950?

[@blueridgedairyandcustomharvest]

I got one they are a pulling machine!

[@tugboat2739]

Howdy bigtractorpower

[@jasonschneider9866]

Supersteer was introduced by Ford

[@bigtractorpower]

Fiat acquired Ford New Holland in 1991. Fiat was allowed to use the Ford name on tractors through 1996. The 1993 Genesis tractors said FORD and had the Ford oval logo although their sales literature only had the New Holland leaf logo. 1994 Genesis tractors had the FORD decal and the New Holland leaf logo. 1995 Genesis tractors had New Holland decals with FORD in small lettering below the NH name. 1996 Genesis tractors simply had New Holland decals. Lots of details for a future video on the history of New Holland.

[@SiboBushings]

Great video

[@adamreyling6505]

Was this filmed recently? Already planting?

[@noehueber6602]

Hello everyone great vidéo big tractor i love t 8050 this plow is a john deere And great equipement for potato planting

[@paulprillwitz9901]

😃😃😃😃👍👍👍

[@williamgreenway9893]

We pulled 6-20"and 1 on land 10 20" with ours. Where we could run our duals with it.

[@bigtractorpower]

Very nice. 👍👍

[@lonewolfeman]

Had an old farmer neighbour who said if you lads harrowed what I plowed you would be doing something. LOL

[@stewarth8650]

💙💪

[@rossnolan2883]

😊😊😊😊😊😊

[@paulofrancisco565]

👏👏🚜🚜👌👌🇧🇷

[@kellenhuber4844]

What is the attached leveling harrows called? Who makes them?

[@davidkottman3440]

Remlinger makes the plow mounted harrow bar.

[@henery09]

hi nice tracto where is this field and plant corn on it, do you give it lime and fertlizer how many arcs of corn here crop grow good thanks.

[@bigtractorpower]

This field is being planted into potatoes. At the 5:25 min mark I show the potato planter running behind the plow. I am not sure what the fertilizer and lime requirements are for this crop. I know that the often apply dry fertilizer on the potatoes after they come up and it is cultivated in. They also may use fertilizer through an irrigation pivot to additionally help the plants.

[@andylieffring3987]

Did the t8050 replace the tg305?

[@bigtractorpower]

The T8040 was the match to TG305. The T8050 was a new power level offering matching the 335 Magnum as the top end model. The 340 ho T8.390 replaced the T8050 in 2011.

[@andylieffring3987]

@@bigtractorpower thank you Jason

[@davepayne586]

we use turn over plows here uk. do you not use them over there.nice video.

[@IG10705]

We use them here, but it's not common in some areas. My area is nothing but chisel plows unless you are Amish where they use the mold boards still.

[@nellsonstout7001]

Not many people plow anymore here (and that’s not a bad thing.) potato farmers and other veggie farmers sure seem to though

[@michaelchapman9375]

Think you’ll find they have cummins engines

[@bigtractorpower]

The Cummins CDC engines were last used on the TG series of New Holland tractors built from 2002 to 2006. Starting in 2007 Case New Holland tractors went to IVECO engines. From 2007-2010 the tractor sales literature referred to T8000 engines a New Holland and MAGNUM engines as Case IH. In 2011 both New Holland and Case IH marketing starting listing the engines as FPT for Fiat Power Train.

[@hettro-cv6082]

I thought most farmers gave up on moldboard plows!

[@nellsonstout7001]

Veggie farmers, especially potato farmers, just do things differently.

[@bayhillag4089]

Controls weeds better than notill less chemicals… I’ve done it both ways and I’m back to moldboarding

[@hettro-cv6082]

I like how you don't have to run a disk over it saves a step! I haven't seen a plow with that extra piece on the out side of the plow.@@bayhillag4089

[@davidkottman3440]

The plow was always best used occasionally, as in plowing sod fields in a rotation before a few years of cropping in the pre fertilizer rotations. There's probably still a place for them used in rotation with high residue & cover crops; continuous plowing is a disaster for most soil & why they aren't used much.

[@MyronMiller-y2j]

🥰

[@williamgreenway9893]

Ñot bad!🤔

[@williamgreenway9893]

And never drove a ford-new holland tractor 😢

[@bigtractorpower]

It’s never too late. They are good tractors.

[@Jrs-tl4kk]

We have a 7610 new holland tractor and a new holland small square baler

[@dereksawatzky2997]

can you do the new Claas 12.650 Xerion?

[@bigtractorpower]

I can do a 12.590. I have not filmed a 650 yet.

[@cs-gj3yf]

tractor has a boost leak somewhere

[@rodneyrtennis1279]

Not a tractor guy. Why would you need 4/6 reverse speeds?

[@davidkottman3440]

They kinda come for free as a function of how many forward gears & ranges are in the transmission. Some machines require running the tractor backwards, then one might need multiple reverse gears.

[@BajrangSingh-xh7oc]

Brother you are country

[@BajrangSingh-xh7oc]

Employment name and price list