New Hub Vs Old Hub

This video is about New Hub Vs Old Hub

[@anniereilly80]

good job you guys. Tim good catch on that. seems people don't have a hole lot of knowledge on this type of set up. thank you Wes for your dedication and thank you Tim for showing today's youth how to roll up your sleeves and get the job done! god bless n best wishes

[@martinbenton5235]

Thank you Wes for the education. I've never been around that type of mower and now have a clearer understanding of its operation. MB BAR RANCH

[@re9947]

I don't know anything about farming but I love looking at the inside of your shop it looks like you cleaned it up lol

[@mikegoodman447]

Wes take that top cap you just chunked in the trash and take it apart to get the shim out between the bearings. Then when you really try to rebuild one next time you can use the shim to adjust the preload so the new bearings will work and not wipe out.

[@craigschofield64]

I am not a hay farmer nor even a farmer...but I grew up in farm country and love to watch your videos so I can learn....damn I screwed up by choosing the city life....30 years too late to change now but you certainly bring back fond memories in every video....Thank you Wes! I wish I had the words to express how much your videos mean to me. I really miss the honesty of the people that tried to tell me what was what. Unfortunately I was too stupid to realize what they were telling me was the God's honest truth! I am now living the farmers life via your videos and wishing I made different choices in life while there was time to change it! Well instead of whinning about it, I will thank you for letting me live the farmers lifestyle via your videos. Oh one more thing, Damn would give my left nut to have guns like you have!...😩...lol I hope you have a Awesome day and even a better season!!!!

[@btowannab9232]

Thanks for sharing and showing us the different hub designs !! Good luck with your hay, this season !!

[@mikegoodman447]

The ShockPro hub can be ordered as a complete kit, It will include the little splined hub where the seal rides. The kit is for 2 assemblies. P/N 87602273 Cost $131.00. Assembly should be torqued in as the sandwiched spline hub carries some of the torque. If you over torque the drive nut the hub will not shear when it needs to. Kit you showed is for the repair of a sheared hub. It only has the shear hub in it and not the little splined hub spacer.

[@Panhead49EL]

It's nice of Tim to help keep Wes active with videos and the hay. All kids should take care of their parents as they age into their senior years. :-)

[@dejanira2]

Good explanation presented with OLF's usual clarity. 🙂🙂

[@brianbaltzly4482]

Hey wes .. wanted to let you know . Tire Ject works . Have a old john deer tractor with leaking tubeless tires . Put one container in each side one month ago. Moved it back and forth once a day for three days then it set for 27 days. Tire pressure is right on 18 lbs just where I set it. I did this on your shot gun video Thank you.

[@ajmac5735]

Nicely picked up Tim. 👍 good bit of info guys.

[@jimwesselman]

That was great and I was glad that Wes gave Tim a little “thata boy “. Interesting how those engineers come up with those designs.

[@theworkbench4884]

I had to change one on my MowMax a few years back. It doesn't take long to lean what to miss once you changed one.

[@GerraldFarms]

Thanks for explaining the different hubs.👍🏻

[@jamesd6972]

Wes thanks for the info. I got a lil too, your shirt needs some Gatorade lol just playing bro I got to get me some olf merch

[@justinwoodlee1062]

I believe Wes is wearing his youngest sons shirt from five years ago. Lmfao

[@jeremysmits9784]

Napa filters are fine for older equipment but on the newer John Deere equipment you really should only use oem filters. I used to work for a John Deere dealership and people were actually having problems because of the aftermarket filters.

[@chevyon37s]

People complain about using NAPA filters?! They're usually a Wix filter! Top of the line!

[@arendjanssens9983]

A new kit also comes with the top plate that covers the 5/8nut. New one is taller

[@leol1682]

thanks for showing us the new hub and old one too.

[@peanut6726]

Wes, this is a little off-topic, but how do you check the moisture of your bales? I remember how we used to check hardwood lumber when it was in the kiln, curious if it's a similar tool? Thanks, love your channel. Hi Tim!

[@kevinwillis9126]

Any chance of a update on the grass seed you planted Wes... Thanks for sharing..

[@PhatboyHD88]

Thanks for the great informative video as always, , i use napa premium filters on my JD ,, except the hydro filter,, i use the JD one for that,, luv Napa filters , they are Made by Wix ,, don’t know why anyone wouldn’t like them...

[@johnrtrucker]

I'm way too immature for this channel I started laughing when you said "see how much bigger the shaft is?" 😂😂😂😂😂

[@peanut6726]

You're not alone, johntrucker. I too will always be mentally 12 years old. Hell, I still laugh at farts...💩

[@baggd65]

My wife says you wore that size tee shirt in high school. And for the video. Ha ha

[@markcornell986]

thanks for picture of the hub.not sure if mine came with the shock hub.2014.

[@onelonleyfarmer]

Mark Cornell yes they do it started in 2008 with the shock hubs.

[@markcornell986]

onelonleyfarmer thanks for reply. Never had too work on it yet in four= years

[@lukestrawwalker]

Shock hub equipped mowers should have a "Mow Max 2" sticker somewhere on it, usually on the belt cover casing... Later! OL J R :)

[@montymorrow5917]

Thanks Wes! Great info!

[@dannythomas5902]

Sure good to have Tim around isn’t Wes your teaching him well

[@williamcherry7336]

Keep up the good work.

[@all4jarrett]

The previous discbine NH made was much much worse. The gearbox's was shared. Loose one gear and its pieces would spread to all the gears becoming a costly nightmare.

[@justinwoodlee1062]

I believe Wes is wearing his yo

[@Andy55411]

I was wondering how those sheer hubs worked. thanks.

[@MARKLOCKWOOD2012]

Need to sharpie case on the box. Then you’ll do a da. Later when yas need it.

[@macspud28]

Has the loose bolt been tightened on the 1411?

[@4gauge10]

Well,if you want to improve machine durability,this video will set the record straight. (I use Amsoil filters Wes,they are not made of paper like the Napa filters,they use glass cellulose blend media,which is the same that is used in dialysis machines and filter down to 1 micron)

[@joshcrd7925]

Just like a Wix XP filter then. Not sure if Napa has a version of them or not.

[@4gauge10]

JoshCRD I handle Wix filters and no they use regular paper in them.Its a"ok"filter,nothing like the Amsoil filter though,the ONLY other filter like the Amsoil in terms of quality is the Richrdson Mil.spec,I handle those too,its a outstanding filter that our military uses that a cilivan can buy.

[@kevinwc5439]

If you had the old hub would it work to grind off most of the teeth with a dremel or die grinder. Just a thought it could save some money.

[@mikegoodman447]

Good Idea but they made it where you can't do it feasibly. You would have to machine the surface down for the washers and remove the splines. The little seal hub he showed carries a lot of the torque, not just the hub splines. Still good idea anyway.

[@stanleyjones4180]

great video wes thanks

[@ihus9950]

Thanks for the info Wes!

[@yvonnejohnson1557]

Do you still have your coffee mugs for sale

[@MarvinLStohs]

It is called a "Belleville Washer"

[@PROFarms]

when you getting the 8120 loader?

[@bigbob1786]

Lol the student becomes the teacher, it's happening to me too .smart little basted HA ha

[@Ravolta]

Yay.. Tim.

[@truracer20]

Nothing wrong with NAPA filters.

[@WilliamTMusil]

Na, Most NAPA filters are WIX and WIX is a good quality filter. Much better off buying and using NAPA filters, than Fram etc ...

[@thesilentg3941]

Wow the 7410 is rotted!!

[@chersey.3579]

What’s wrong with the 7410?

[@onelonleyfarmer]

Chersey .357 oil change and other maintenance things

[@chersey.3579]

Are you gonna sell it when you put a loader on the 8120?

[@onelonleyfarmer]

Chersey .357 no it will be a site machine or used for other things

[@fordguy2001]

first

[@anonymousperson9057]

fordguy2001 no u

[@advandervelden1588]

Comment

[@peanut6726]

Subscribed

[@markcornell986]

oh no not directions.

[@thr8061]

Hey Tim! ....

[@dphillips705]

did it happen to be timmy cornpickers mower?

[@onelonleyfarmer]

candianwelderfarmer nope

[@839Unipicker]

I have a Hesston 3309 (later incarnation of the New Idea 5209).

[@jeffreyhollink985]

krone has the best en the cheapest whay of id just ah rolpin