NEW Milwaukee INSIDER Ratchet! The one to Rule them all? Milwaukee Tool 3050-20 3050-21

Рет қаралды 37,566

Күн бұрын

Пікірлер: 57

@davidmudrik6539 Жыл бұрын

I'm starting to collect tools, and I don't think I ever appreciated how much cool stuff you have in the garage till I started doing it myself!

@BlakesGarage Жыл бұрын

Haha thanks David

@j.jarvis7460 7 ай бұрын

After I found your channel I had to see what you said about the this ratchet. You did not let down! Well done!

@BlakesGarage 7 ай бұрын

Awesome glad I could help 👍🏻

@aaronmelson2887 Жыл бұрын

This insider is def on my radar. I have to do a brake job on my car, front and rear, and I have been looking for an electric ratchet. My first electric ratchet.

@andersonlane54321 Жыл бұрын

As a person with bigger hands; I like the paddle. It allows me to hit the button almost anywhere my hand is on the ratchet. It gets caught up so rarely that I barely notice the extra size compared to a button

@DJ-jq8if 11 ай бұрын

Had an incident when I was jamming out to master of puppets. everything was going good on this water pump take down. Until I backed out the bolt too far and got the ratchet pinned against the body and the bolt. Had the biggest “oh shit” moment in a while. Long story short, was able to switch the ratchet back to tighty with a dental scraper pick and all was well. So thankful Milwaukee did this new feature.

@maxmil2809 10 ай бұрын

Honestly I have the right angle impact and it’s done the job so far. Although that insider ratchet is something I really want especially when working on engines

@1elmofles 9 ай бұрын

When I buy Milwaukee tools I don’t even want to throw away the box 😂😂😂😂

@actshunterrell615 3 ай бұрын

I thought I was the only one😂😂😂

@rickylee2477 2 ай бұрын

🤦🏽‍♂️

@brianreilly429 Жыл бұрын

Excellent demo review

@f82regpaq Жыл бұрын

I got the 3/8 extended reach and wasn't sure i was sold on this update, but by the end of the video i want it!!

@kellygavin2 29 күн бұрын

Which rachet would you recommend for hydraulic hoses/ Valve Chests on Excavators etc?

@YuriesMix 3 ай бұрын

Why the battery is more bigger :(

@JD-um8sq Жыл бұрын

You think you could do a video on what tools you use on the 4runner? I'm trying to build out a Milwaukee set and it would be cool to see where you use a 1/2" impact vs a 3/8" impact mid/high torque, insider etc.

@wIzKid16100 5 ай бұрын

Wish Milwaukee made a short neck version. I barely use my speed m12 anymore cause of the insider is my go to but at times it’s too long

@mg8718 9 ай бұрын

I would still use my hand rachet for those coils.

@Omarthecrowbar84 10 ай бұрын

How was that unit

@calebhazelwood8716 4 ай бұрын

So you can put other brand sockets on the anvil?

@BlakesGarage 4 ай бұрын

Yes, 3/8 and 1/4 can use any regular college.

@itspapaj4732 Жыл бұрын

This ratchet is a good idea, but unfortunately it is a flop. The ratchet tends to lock up at low loads and has a tendency to lag.

@shaunclancey1107 Жыл бұрын

yea i was super excited for it but the TTC video made me pretty concerned, if they fix the detents and skipping it should be fine

@sakaraist Жыл бұрын

That's nothing new, it's been a common occurrence with electric ratchets for ages, both my first gen milwaukee ratchets did it and the snap-on I had before as well. If I've got to break things loose, that's what the ratcheting function is for. Otherwise, i'm using an impact anyway. My only gripe with it is that the sockets fit significantly more snugly in on one side than the other. If your intending to be puttiing a decent load on it, right angle impacts are a better bet if you need the form factor.

@YuckFou0x0FFFF 2 ай бұрын

My guy. It is a ratchet. This is like buying a Prius and complaining that it's slow. If you want a fast car, buy a fast car. If you want a 90° impact, buy a 90° impact.

@itspapaj4732 2 ай бұрын

@@YuckFou0x0FFFF it's like buying a Prius that gets horrible gas mileage. I'm not complaining that it's slow, but rather simply pointing out that for the price they're asking, this ratchet sucks. As far as power goes, I'm not expecting huge numbers, but you always should expect it to have at least enough power to be comparable to the high speed ratchet which is around 20-25ft lbs of torque...

@YuckFou0x0FFFF 2 ай бұрын

@@itspapaj4732 Torque Test Channel did a video on this. They showed It as around 40-50 ft lbs off trigger pull with an appropriate battery. + a little nudge to get it just passed 60.

@jasonharrisom 4 ай бұрын

6 thumbs up thank you.

@FLiPpiNpRidE 5 ай бұрын

anyone know the difference between the 3050-20 and the 3050-21?

@BlakesGarage 5 ай бұрын

-21 comes with one battery and most likely a charger -20 is just the tool. If the part number says -22 it comes with two batteries and HO means high output.

@georgeferlazzo7936 Жыл бұрын

Hello Blake's Garage I just found your channel and subscribed. Question for you, is there a SAE version of the sockets?😊

@BlakesGarage Жыл бұрын

Yes there is you do have to order that one from Milwaukee. But it’s also nice that it has the 3/8 adapter so you can use basically any of the sockets that you already have. Plus it has a quarter inch adapter as well.

@LoveMyMagMoreThanYou 10 ай бұрын

@@BlakesGarageThere actually is a 1/2" adapter available for purchase separately also.

@BlakesGarage 10 ай бұрын

@@LoveMyMagMoreThanYou what! That’s rad.

@JackElectrician Жыл бұрын

🔥🔥🔥

@BlakesGarage Жыл бұрын

Thanks Jack!

@mg8718 9 ай бұрын

If your working on a Honda Civic or a Honda Fit your gonna need 6 inch and even 10 inch extensions no matter what.

@29auto30 Жыл бұрын

Acme tools said its made in China?

@shr00m7 Жыл бұрын

This was a very chaotic video.

@adamkelley3622 11 ай бұрын

A couple of disappointing features is it doesn’t go to 3/4” pass through for 1/2” all thread and it doesn’t fit Astro low profile sockets proprietary was not the way to go I would much rather buy a tool that works with other sockets especially if you break or loose a socket

@BlakesGarage 11 ай бұрын

You can use all the normal sockets you have with this no problem with the 1/4 or 3/8 anvil

@DownloaderVideo 10 ай бұрын

On bigger sockets making them pass through would make them weaker probably braking while in use. And regarding their proprietary sockets remember Milwaukee is a company and the goal is to make money, improving a tool while creating necessary accessories and add ons for such tool plus expanding their catalog is a win win for them.

@jorgeherrera4194 Жыл бұрын

Do they have 12-point sockets with that set?

@BlakesGarage Жыл бұрын

The ones that come with it are all just regular ones not sure if they make a 12 point yet.

@datbouldrawlinun8183 7 ай бұрын

It’s good but weak. Wish it was made like a impact

@kendalgee5808 9 ай бұрын

Bro, he barely usesd that insider. He could have gotten away with a 1/4 or 3/8 Hercules for 1/3 of the price.

@billmyers8572 Ай бұрын

No one has ever used a 20

@Kriptoker 7 ай бұрын

proprietary sockets...no thank you.

@BlakesGarage 7 ай бұрын

Did ya watch the whole video? You can use regular sockets also

@user-ep6wd7ip7v Ай бұрын

This thing sucks ass I can hold the socket and it won’t even spin zero torque

@atschirner Жыл бұрын

Good content but horrible lighting and production quality.

@BlakesGarage Жыл бұрын

Sorry it exported weird with the color profile from the HRD video. Usually I don’t have an issue but Ive been messing around an AI editor and it kinda did some weird stuff.