So many coffee channels but somehow yours is the funnest and enjoyable one. Thanks for update!
@mycoffeeshow1116 ай бұрын
Thank you for watching and your support. I just enjoy playing with coffee 😁
@GabrielGGabGattringer6 ай бұрын
I got mine finally on February 20th after waiting for months! I´m super hyped and can´t wait to start testing, collecting data!
@mycoffeeshow1116 ай бұрын
Congratulations! Have you tried it yet? Was it worth waiting?
@keinenplanhatter73246 ай бұрын
My favorite Brewer is the Hario Switch . Enough Options to play, our simple to use for larger Batches [Size3].
@mycoffeeshow1116 ай бұрын
Thx for sharing. That is one brewer I have never had myself.
@keinenplanhatter73246 ай бұрын
I love IT, but the Downside, you need too preheat massiv the Glas
@seansweet48836 ай бұрын
Thanks, as always, Jack. I have many brewers (including an old Bonavita immersion/perc) and to answer your question, my favourite brewer these days is the large Origami Air. I can use either V-60 02 filters (Cafec Abaca 4) or flat bottom (Kalita 185). A close second is the Next Level Pulsar.
@mycoffeeshow1116 ай бұрын
Thx for watching and sharing. I have never tried Origami. Maybe I should.
@tom98366 ай бұрын
I got mine too recently, and it is a brilliant engineering device, with high quality materials and really well thought out. I'm very happy with the purchase. I got the narrow, and I use the negotiator I already had for my mk3, which works well on the kalita papers. I put the kalita on the negotiator first (bottom side up), pre-wet it with room temp water, then negotiate it into the brewer with a twist. Works like a charm and no need for the super expensive papers 😅
@mycoffeeshow1116 ай бұрын
Well done! I will get the dedicated negotiator when is available. How it compares vs V3 in your opinion?
@grrothman6 ай бұрын
Got mine today, psyched to play. Thanks for your early impressions!
@mycoffeeshow1116 ай бұрын
Congratulations! I still try to get the negotiator- out of stock all the time. Thx for watching. Please share your experience with us once you play with it.
@meestergud5 ай бұрын
Ordered a v4 because I do want to play with the process. Thanks for the input.
@mycoffeeshow1115 ай бұрын
Thx for watching. When is it arriving? I ordered the negotiator yesterday and they say it should be shipped in April!
@meestergud5 ай бұрын
@@mycoffeeshow111yep. Brewer in March. Negotiator in April.
@mycoffeeshow1115 ай бұрын
@@meestergud crazy long waiting time for a pice of plastic
@meestergud5 ай бұрын
@mycoffeeshow111 Agreed. You think it is supply chain or just popularity?
@mycoffeeshow1115 ай бұрын
@@meestergud combination of both. I remember they had some issues b4 the pirates. I contacted Orea , wanted to record something with them, since their hq is here in London, but so far they were too busy to answer 😛
@fritiof_konkas4 ай бұрын
oh my lord! so fun to watch i almost can't focus on the information. but also good information :D
@mycoffeeshow1114 ай бұрын
Hahaha, thx for watching!
@Java_CM6 ай бұрын
your a entertaining guy Jack! thanks for the in depth honest review. v4 looks very interesting but I think ill just buy the glass one.
@mycoffeeshow1116 ай бұрын
Thx for watching! With my clumsiness, glass one would not survive long 😛
@Doron-free3 ай бұрын
Hi Jack, nice video! Love your humor xD I wanted to know if you could see a big change in brewtime between V3 and V4 wide. Also I would love your insights on how the taste differs. Can you taste more body? Is it less acidic in the flavor profile? It'll be my first flat bottom brewer and I wanna make a good decision wether it'll be wide or narrow
@mycoffeeshow1113 ай бұрын
Thx for watching. Tbh, I don’t know the answer but your question might be an inspiration for another video. In the meantime, I prefer the workflow of wide orea, easier to pour the water and allows me to brew double batches.
@Doron-free3 ай бұрын
@@mycoffeeshow111 thanks for your quick answer. I'd be super interested in a video answering those and other questions around possible differences in workflow and cup results. I guess, coming from a V60 Switch and sometimes being overwhelmed by an unwanted acidity in cups that I didn't expect it in - I'll go with the wide version. Also cause the easier workflow sounds good to me :)
@rittervsp6 ай бұрын
like your sense of humor )
@mycoffeeshow1116 ай бұрын
Thank you!
@yuisthinking6 ай бұрын
finally a "real" Orea V4 honest review! thanks for sharing
@mycoffeeshow1116 ай бұрын
Thank you very much for watching!
@user-jm7lh9si1w5 ай бұрын
Couldn’t tell difference from the v3 myself. Gave it to my son lol.
@stnvs6 ай бұрын
I wonder if it's possible to use a smaller flat filter(like an aeropress filter), and just "lock" the filter between two parts of orea? If we can do this, then it becomes a cheaper no-bypass solution by using just a small filter (maybe a 1/3~1/4 size sibarist filter).
@mycoffeeshow1116 ай бұрын
I don’t think it would work in practice (because of the way the attachments are screwed) but definitely an interesting idea. I am sure that more modules will arrive.
@propertwb6 ай бұрын
Fun and great review!
@mycoffeeshow1116 ай бұрын
Thank you for watching!
@ciruscoffee42906 ай бұрын
Hi Jack ,can't wait testing the fast with finer grind size comparing to my Orea v3
@mycoffeeshow1116 ай бұрын
You will have lots of fun with it. Please share your findings with us here.
@devongreer92336 ай бұрын
Cool! I just got the mk2 and its a nice change from the mk1.
@mycoffeeshow1116 ай бұрын
Great. It is difficult to keep up with all the new stuff from Orea 😛
@erikasoldit5 ай бұрын
So many options! I have a Hario Switch. Just starting to to play around with pour overs and my df83v. I ground way too fine this morning for the first one I did.
@mycoffeeshow1115 ай бұрын
I have never tried Hario switch myself. Apparently very good. Do you have pour over burrs for DF83v?
@erikasoldit5 ай бұрын
@@mycoffeeshow111 I have the DLC Brew Burrs but haven’t swapped from my SSP HU yet.
@mycoffeeshow1115 ай бұрын
@@erikasoldit I see. HU should do the job nicely. Good luck with dialling in
@erikasoldit5 ай бұрын
@@mycoffeeshow111 The one I did this morning was over extracted and tasted better than with my Niche zero so once I get the grind right should be good. But I do have the brew burrs to try if i want to switch over. I primarily do espresso though.
@MrCocoman16 ай бұрын
Just got the Orea v4, did a 3 pour using the fast base. Zp6 4.3 setting usually 4.5 as thought would go finer. 15g :240. Draw down was like 3.50 sec 😢 used a washed coffee from apollons Gold. Maybe 3 pour is the issue. I used to do 5 pour on my Orea v3
@mycoffeeshow1116 ай бұрын
First of all- congratulations- not an easy brewer to buy . I guess it all depends on coffee, filters, recipe and so on. See how it goes with different attachments. I usually go for 5 pours myself.
@MrCocoman16 ай бұрын
@@mycoffeeshow111 just did a 5 pour with he Orea v4 open base, a lot of sweetness. Apparently for me the draw down on the open base is faster than the fast base 😳 tho less body but sweet n nice clarity 4.5 grind setting
@mycoffeeshow1116 ай бұрын
@@MrCocoman1 thx for sharing.
@Fluffy3-tv7ky4 ай бұрын
Thanks for the review! I was wondering if you had more time to compare the V4 wide version to the V3? Which do you prefer? Would you buy the wide version again, or rather go for narrow?
@mycoffeeshow1114 ай бұрын
Thx for watching. Both great, but I have lots of fun with this new one. Wider opening makes pouring a bit easier. It can also accommodate more coffee for when I want to do a double batch.
@Howie-bz5pe6 ай бұрын
Perfect review. I’m waiting for them to be available again. I have a stagg x will I see much difference?
@mycoffeeshow1116 ай бұрын
Thx for watching. I am waiting for new negotiator to become available. Never tried Fellow brewer. There should be some difference because of different shape but can’t say for sure.
@iBeKev5 ай бұрын
Thank you for the video! I have an aeropress and picopresso and want to explore more varieties of coffee making as well as brew two cups for me and my +1 on the weekends. Would you recommend this (in wide) versus another pourover style brewer like the origami air M? Thanks!
@mycoffeeshow1115 ай бұрын
Thx for watching. You can brew double batch of coffee on it. With my caffeine addiction that is what I normally do. I haven’t tried those two you mentioned so can’t say for sure but if you like to experiment, Orea v4 could be for you.
@iBeKev5 ай бұрын
Thanks!@@mycoffeeshow111
@ericbaluya3616 ай бұрын
The problem with Orea is that they are not able to produce enough and sell at a premium. This only creates a gap that people fill with cheap alternative or a rip off.
@mycoffeeshow1116 ай бұрын
You might be onto something here. Especially with those new products, it is difficult to get them.
@Eirikkinserdal5 ай бұрын
Try brewing bigger. When brewing 500ml i am on the limit of the filter. How much do you have to go on when brewing in the v4 wide?
@mycoffeeshow1115 ай бұрын
I do actually brew bigger batches now, 35g of coffee and 500 of water in 5 pours. Works just about ok but have to keep an eye on liquid level.
@Eirikkinserdal5 ай бұрын
Depends on the coffee of course, some are slower than others 😅
@mycoffeeshow1115 ай бұрын
@@Eirikkinserdal obviously it depends on many factors. When I brew for myself, I don’t really worry about the time that much. For big batche I would say 4-4.30min is ok. If it tastes over extracted I can always grind coarser next time.
@QuanayLaiLa6 ай бұрын
Hello sir, did you have any Fellow grinder like Ode Gen 2 ? How do you think about Ode vs Comandante C40 or 1Z K-Ultra ? Its pretty the same price, may be +/- 50$ but i just wonder will Ode do the better job than hand grinder for filter :))
@mycoffeeshow1116 ай бұрын
Hi, never had one so can’t say for sure. I know you can install ssp burrs in them and that would make them awesome but also more expensive. I am a lazy person so would always go for electric grinder.
@QuanayLaiLa6 ай бұрын
@@mycoffeeshow111 I just heard James daddy said thay the second verson of Ode burr is very close to SSP burr but cheaper. The Ode gen 2 come with second verson burr so we dont need to buy any burr else
@mycoffeeshow1116 ай бұрын
@@QuanayLaiLa you are right but people still do get them
@ColdCoffeePhotography6 ай бұрын
Thanks for testing Jack - think I'll stick with my v60 & Kalita Wave for my drip brews
@mycoffeeshow1116 ай бұрын
Thx for watching. I have a glass Kalita but never liked it much- was clogging too often.
@unsharted_territory5 ай бұрын
The price gave me dye orea 😮
@mycoffeeshow1115 ай бұрын
Haha, that is the good one. The long waiting list can constipate many though 😛
@suferick7786 ай бұрын
I've banned myself from the Orea website. Every time I visit I want to buy something new. I'll stick to my V3
@mycoffeeshow1116 ай бұрын
You are smart. Last time I just wanted to get some filters and I ended up pre booking this new V4 😛
@user-jm7lh9si1w5 ай бұрын
Couldn’t tell difference from the v3 myself. Gave it to my son lol.
@user-jm7lh9si1w5 ай бұрын
Couldn’t tell difference from the v3 myself. Gave it to my son lol.
@user-jm7lh9si1w5 ай бұрын
Couldn’t tell difference from the v3 myself. Gave it to my son lol.