@@mopikozz you should be happy with K Ultra for sure.
@robertebobКүн бұрын
this makes me not scared to do my k-plus for the first time.
@mycoffeeshow11116 сағат бұрын
@@robertebob If I could do it, you will have no issues as well.
@ModularLandingКүн бұрын
Great video! As a LaPavoni user, I really appreciate this type of content and it is very helpful to me in understanding how to explore the machine. Just one comment on pronunciation: “turbo” in English is pronounced “terr-bo” not with a long “u” or “oo” sound. I thought you were saying “tour bus shot” at first, and was about to Google that! Thank you, I have subscribed.
@mycoffeeshow11116 сағат бұрын
@@ModularLanding Thx for watching! My kids try to correct my pronunciation all the time. Not sure if much can be done but will try for sure.
@TooManyPBJsКүн бұрын
You should do Timemore low/med/high RPM vs df 64 v2
@mycoffeeshow111Күн бұрын
@@TooManyPBJs maybe you are right but I am not sure if that would be fair.
@matheus49722 күн бұрын
Does it fit a 58.5mm tamper?
@mycoffeeshow1112 күн бұрын
@@matheus4972 It works with my 58.5mm Force Tamper
@andrewlambert50952 күн бұрын
Please don't wind your k6 grinder past it's zero point. Coming from Kingrinder themselves, the zero mark IS the true zero point. The extra wind back is to protect the burr set. They also recommend you don't turn grinder with th setting lower than 15 clicks or you may damage burrs. I have emailed them and got those answers.
@mycoffeeshow1112 күн бұрын
@@andrewlambert5095 thank you very much! I will remember that.
@andrewlambert50952 күн бұрын
@@mycoffeeshow111 no problem, after watching you video I learnt to dismantle and clean. I turn mine out to largest setting which is five clicks from zero on fourth round and leave it there. After reassemble it was set as per new. I brush it out after each use and it seems to get most grinds out as when I pulled it apart there was very little missed. I emailed the company after accidentally turn tighter than zero to clean when I thought I was turning it to open it to largest setting (4am coffee moment 🤦🏻♂️) and was concerned that I had done damage. The first strip down and clean showed all was good as they said should be as I hadn't tried to turn burs
@philindeblanc3 күн бұрын
I purchased both the 3Bomber and the iKape. 3Bomber fits the 54mm much better. Even though the iKape has magnets, they never meet the basket rim. 3bomber 16$, iKape 33$. Also, the bell on the iKape has a slight gap and fine grinds fall out a bit. Interesting difference in the look of wdt vs shaker Jack! The shaker for me is less hassle. No need for doser cup.
@mycoffeeshow1112 күн бұрын
@@philindeblanc thank you very much for sharing your experience. Very helpful. Right now I use cyclone WDT from MHW and I really like the workflow.
@shamblingpound96173 күн бұрын
I have a J Max and Flair 58 combo and its phenomenal. Love it to bits.
@mycoffeeshow1113 күн бұрын
That is one of the best value for money setup for sure. How many shots per day do you make? It can be a proper workout.
@JuliusSP15 күн бұрын
You have done a great job in breaking down the flavor and tasting experience with different burrs giving a lot of depth. More so than anyone else I believe. Have you experienced much pour over brews from the 078 sculptor and if so how fo you like them compared to the df83V with the lab sweets?
@mycoffeeshow1114 күн бұрын
Thank you very much for watching! I only had 064s at some point and it was ok but nothing special. One thing for sure, DF83v is so far my favourite reasonably priced grinder.
@philindeblanc7 күн бұрын
Much better than any plastic mixing with hot water! Plastic off-gases and ends up in your brew with no taste. BTW, Any navigation opposite from south is towards north center. East to west is a circle...LOL :-)
@mycoffeeshow1116 күн бұрын
@@philindeblanc I am thinking about getting ceramic Orea to try and compare with plastic one.
@philindeblanc6 күн бұрын
@@mycoffeeshow111 I use a ceramic Bovetta , it also has a close/open silicon so you can control when to let it drip. Pretty cool so far. I broke the first, now more careful and had it for a few years. Cheers!
@mycoffeeshow1114 күн бұрын
@@philindeblanc that is my main concern- I am very clumsy and glass things don’t last long with me 😛
@philindeblanc4 күн бұрын
@@mycoffeeshow111 Come on, you can be a bit more careful. If you are careful in product reviews, you can be careful not to break glass. Perhaps you will want to test it some day? Now I think I got your attention! LOL. Cheers mate!
@mycoffeeshow1113 күн бұрын
@@philindeblanc I dropped soo many expensive wine glasses that now I only drink from the cheapest ones. But since Orea gave me a very generous discount I may as well buy glass brewers to test.
@JuliusSP17 күн бұрын
These burrs or the lab sweets for the df83V or the 078 sculptor ?
@mycoffeeshow1117 күн бұрын
@@JuliusSP1 well , I haven’t tried 078s but LS , after long seasoning, can give you awesome espressos and pour overs as well
@vuduong1737 күн бұрын
I upgraded from the regular DF64V DLC burrs recently to the SSP Lab Sweet V3, which is designed specifically for espresso. It has the exact same geometry as the Cast Silver, but with the Red Speed coating (TiACN). The shot I pulled from a single origin coffee is extremely sweet, very very pleasant to drink. So far I've been enjoying this quite a bit. I think if you're thinking about upgrading from an Itamil or DLC to the SSP HU, then I'd say the upgrade is not worth it. But moving from the Itamil to the Lab Sweet or MP, then the upgrade is worth considered. But then again, it's up to how you like your coffee. I want a sweet cup with a lower body but higher acidity, but not to the degree of sacrificing nearly ALL body for fruitiness with the MP, so the LS V3 is a very nice balance for me.
@mycoffeeshow1116 күн бұрын
@@vuduong173 thank you very much for sharing your experience. I am a big fan of LS burrs on my DF83v and I am sure I would like LSV3 on DF64 as well.
@vuduong1736 күн бұрын
@mycoffeeshow111 I forgot to add that my burr set is no wear near well-seasoned yet, so it has quite a range of inconsistency currently, but the general taste profile is certainly different than the DLC burrs. Also, the LSV3 grinds much slower than the DLC burrs, but it also eliminates lots of fines and reduces quite a bit of retention with the DF64V (both at the same RPM). For example, the DLC burrs basically require the use of the bellow to reduce the retention. But, you can certainly ignore the bellow in case of the LSV3. This is only in the case of the DF64V, though. Your mileage may vary with different grinders.
@mycoffeeshow1114 күн бұрын
@@vuduong173 thank you very much for all the info. I have noticed that SSP burrs grind slower, both MP and LS. I still like to use the blower though.
@philindeblanc8 күн бұрын
Your shirt is correct. There is zero such thing as gravity :-)
@mycoffeeshow1117 күн бұрын
@@philindeblanc obviously, the earth is flat so there can’t be anything like that
@philindeblanc7 күн бұрын
@@mycoffeeshow111 LOL.... In the USA we are always behind in these things :-)
@mycoffeeshow1117 күн бұрын
@@philindeblanc we all agree that earth is only 6k years old. I found this info on American website so it must be true.
@philindeblanc7 күн бұрын
@@mycoffeeshow111 Well, today, it is much harder to know what is true. Because for sure, those in power can never say "We don't know". They always claim to know, in order to take over the idea of the All Mighty.
@JuliusSP18 күн бұрын
Is the particle distribution for 83 mm lab sweet bimodal or high uniformity pr low uniformity perhaps with low fines? Is it more intended for filter or for espresso?
@mycoffeeshow1117 күн бұрын
@@JuliusSP1 I am not smart enough to analyse the particles and it can also be affected by pre breaker and rpm. I like it both for espresso and pour overs. Expect less clarity and less separation in notes but overall pleasant coffee.
@jiinx728 күн бұрын
Personally for the asking price a water tank cover should come as standard. No other company leaves their's without a cover. And where I live there's a really high chance something will end up doing the backstroke in it 😆. But still looking for my next and last espresso machine. This is high on the top 3 regardless.
@mycoffeeshow1117 күн бұрын
@@jiinx72 you are absolutely right. I am sure they will address many of the issues with new Decent model next year.
@mycoffeeshow1116 күн бұрын
I would love to get it but it will be soo expensive.
@jiinx726 күн бұрын
@mycoffeeshow111 True. For the asking price of the Pro that's into dual boiler chrome god country 😆
@philindeblanc8 күн бұрын
Jack! The DF83V is VERY NICE!!!! So far very happy! The one thing that is odd is if I tighten the carrier cap, the adjustment dial gets stuck, so I need to back up a little. This changes the sticker arrow position. it is unknown when it should be stopped so the distance is uniform when I open, clean close, and adjust. So I tighten until it is not easy to adjust, but very possible. Not huge, but there is some thought needed for this to be consistent for V2 solution. Wondering what you think?
@mycoffeeshow1118 күн бұрын
@@philindeblanc Thx for sharing! I love mine. Have you seen my initial review? I think I mentioned something about that. I’m sure they will make it even better for next version but it is still selling well as it is so we might need to wait.
@philindeblanc8 күн бұрын
@@mycoffeeshow111 I probably saw your initial review at least once, lol. Cheers! FYI, it might be sooner, as I notice the price is lower from some sources.
@mycoffeeshow1117 күн бұрын
@@philindeblanc I haven’t heard any rumours yet but who knows.
@fuzion10949 күн бұрын
For cafec filters you should use cafec medium dark t90 papers. Their naming scheme is confusing, light is the slowest, medium dark is the fastest and dark is in between the two.
@mycoffeeshow1119 күн бұрын
@@fuzion1094 thx for the tip. I had some very good results with other Cafec filters but those are simply too annoying.
@fuzion10949 күн бұрын
@@mycoffeeshow111 yep, with the t92 paper I need to grind coarse, no beans with a ton of fines like Ethiopian and only do a bloom and a single pour with no agitation
@mycoffeeshow1118 күн бұрын
@@fuzion1094 that makes sense. Thx for advice!
@anonylesss9 күн бұрын
oh wow! the C3 was my first grinder that I bought when getting into home brewing. I started using it with an Aeropress and then got Flair Signature. it was quite hard to dial in for espresso with the C3, but possible (specially as preping for a shot for the Flair is a process..) , as i did get tasty shots with it . would not recommend to buy as a first grinder for espresso. it's very well made and i liked it. i think for filter coffee , it's a great budget grinder
@mycoffeeshow1119 күн бұрын
@@anonylesss thank you very much for sharing your experience. I do agree with everything you said.
@jonas56669 күн бұрын
Better get one of the C3S models rather than C3, just a bit more expensive but all-metal build.
@mycoffeeshow1119 күн бұрын
@@jonas5666 Thanks for the recommendation. Yeah, I will sell this one soon and will get something else to test. Timemore has so many to choose from.
@MikeM-kv2yi10 күн бұрын
Similar to others. KZbin finally decided to recommend your channel recently. Hopefully you're now on the right side of the algorithm and will see your views go up l.
@mycoffeeshow1119 күн бұрын
@@MikeM-kv2yi thank you very much for watching! I haven’t been on the right side of the algorithm since the inception of this channel 😛
@theagenereux10 күн бұрын
Love your coffee gear reviews. Keep up the good content 👌👏👍
@mycoffeeshow1119 күн бұрын
@@theagenereux thank you very much for your support!
@Max-ss2gy10 күн бұрын
Did you use those for a longer time? I just bought SSP sweet lab v2 and it feels like I'm getting so many fines that all my pour overs are clogging the filter. Wondering if that actually gets better with even more seasoning
@mycoffeeshow1119 күн бұрын
@@Max-ss2gy well, I gave up with 64mm LS for espresso but 83mm are currently my favourite SSP. I would say it took 7-8kg of coffee to season them fully but it is difficult to say precisely how much it takes.
@Max-ss2gy9 күн бұрын
@@mycoffeeshow111 very interesting! Thank you. I'm actually currently running them in my ode 2 and can actually grind espresso fairly consistently. But I'm seeing more problems with filter brews and clogging. But it seems to be getting better with every brew I make.
@mycoffeeshow1119 күн бұрын
@@Max-ss2gy as someone mentioned before, there are few versions of 64mm LS burrs, and mine is simply not good for espresso but great for pour overs. Regulated rpm on DF83v helps a lot with the overall results.
@almn9o0ri10 күн бұрын
Please i need the londonium profile
@mycoffeeshow1119 күн бұрын
@@almn9o0ri londinium is a relatively easy profile to dial in and the results are often very good.
@ravelly0710 күн бұрын
30click per cicle Is like Timemore ESP, Is not?
@mycoffeeshow11110 күн бұрын
@@ravelly07 I haven’t had T ESP but it sounds plausible. My new MHW I am testing now has 60 clicks per revolution.
@ravelly0710 күн бұрын
@@mycoffeeshow111 which one? 😱
@itamarkas10 күн бұрын
the intro music....SO CRINGY!!!!
@mycoffeeshow11110 күн бұрын
@@itamarkas the rest is even worse 😛
@itamarkas9 күн бұрын
@@mycoffeeshow111 <3 all with pure love men!
@mycoffeeshow1119 күн бұрын
@@itamarkas thank you
@julianpark9310 күн бұрын
The cafec light roast filters are the worst. I got super frustrated. I just use Cafec Abaca or Kono papers
@mycoffeeshow11110 күн бұрын
@@julianpark93 yeah, I always liked other Cafec filters but those are so annoying.
@Howie-bz5pe10 күн бұрын
Perfect timing thinking of a q air for my aeropress travel kit.
@mycoffeeshow11110 күн бұрын
@@Howie-bz5pe I recorded it just for you 😛
@Howie-bz5pe10 күн бұрын
@@mycoffeeshow111 finally a video that I don’t have to cry about no breville support 😂
@mycoffeeshow11110 күн бұрын
@@Howie-bz5pe btw I asked MHW about smaller Impact tamper. It is coming but nobody knows when 😛
@Howie-bz5pe10 күн бұрын
@@mycoffeeshow111 enjoy your vacation. I have my vacation coffee set aside I guess I’ll need to pack lol
@mycoffeeshow11110 күн бұрын
@@Howie-bz5pe thx. Have a good one as well!
@FaithAndCoffeeBean10 күн бұрын
I have a Timemore c3 pro as my daily driver for espresso and I love it!!!!
@Filhodopaulo10 күн бұрын
my hero
@mycoffeeshow11110 күн бұрын
@@FaithAndCoffeeBean maybe that Pro makes all the difference. It is definitely a solid choice in this price range.
@dkedavid10 күн бұрын
It's not a proper grinder comparison review unless it has the double-helicopter outro.
@mycoffeeshow11110 күн бұрын
@@dkedavid you are absolutely right. Not sure why but everyone else does it and so do I.
@garrysutcliffe625410 күн бұрын
Kingrinder k2 is easily the best at £30 , grinds all way to Turkish coffee
@mycoffeeshow11110 күн бұрын
@@garrysutcliffe6254 can’t beat that price
@n6rcan10 күн бұрын
Hahahaha that was Hilarious! Asking for refund😂 Glad I went to Cafec T-90.
@ExtractionFaction10 күн бұрын
Haha!! So excited for this video!
@mycoffeeshow11110 күн бұрын
@@ExtractionFaction thx. Should be a good one.
@philindeblanc12 күн бұрын
Jack! .....ALL burrs are parallel :-) Some are vertical, some are horizontal. xoxox. I get the DF83V in a few days!
@mycoffeeshow11112 күн бұрын
@@philindeblanc yeah, I was waiting for someone to point it out 😛 Congrats on your new purchase. Please let me know how you like it.
@philindeblanc12 күн бұрын
@@mycoffeeshow111 LOL.... Thanks. I was reading a grinder reviewer named Tom, I think he is in NZ or Australia. His video, like almost everyone else, says all the great things on the grinder. Then today, I find his extensive review in writing on different grinders. Reading that it covers grind adjustment dial, that no one is covering, and is likely the most important feature. And I am hoping I dont have these issues, but tis making me think that if I do, I refund it for a DF64V or another one NO ONE is reviewing, the G64 variable from GZZT or iTop. under $375. I guess the reviewers are not getting any sent to them to review...LOL. Cheers!
@mycoffeeshow11111 күн бұрын
@@philindeblanc what are your worries about it? I have recorded good few videos with DF83v and I thought I mentioned most of the things both good and bad.
@philindeblanc11 күн бұрын
@@mycoffeeshow111 In the "What I dont like, the last point about larger burrs, and the ability to dial back in. Though he consults with another person and there is a finer to coarser process, my biggest concern is to be able to repeat the previous grind setting.
@kristoforusranandiasuliset373613 күн бұрын
Is comandante C60 already gold clix?
@mycoffeeshow11113 күн бұрын
@@kristoforusranandiasuliset3736 yes it has gold clix
@kristoforusranandiasuliset373613 күн бұрын
@@mycoffeeshow111 compared to Kinu M47 Classic, which one is the best overall? I've seen James Hoffmann's video about hand grinder comparison that even Comandante C40 or including red clix is better for filter coffee, but he chose Kinu M47 Classic for best overall (Even Kinu M47 was better for espresso than pour over, but there's also pour over Burr for Kinu M47) (if I'm right)
@mycoffeeshow11113 күн бұрын
@@kristoforusranandiasuliset3736 I am a big fan of Kinu - one of the best espresso hand grinders but not that good for pour overs. I would never really recommend C60 unless you are a big fan of Comandante and don’t care about the price.
@robertobrandoli446214 күн бұрын
I can't find Indian coffee, is it possible? The one with barrel-aged whiskey...
@mycoffeeshow11114 күн бұрын
@@robertobrandoli4462 I can see one on their website:www.subko.coffee/products/the-spirit-series-cask-barrel-aged-lot-sv09-medium-roast-pan-india
@josuevillalonjorquera371414 күн бұрын
Thanks a lot Jack for this video. It really helped me to calibrate my K Ultra
@mycoffeeshow11114 күн бұрын
@@josuevillalonjorquera3714 thank you for watching!
@AnskarKong14 күн бұрын
You know what? Most Chinese brands have stopped making flat base tampers because most casual users in China prefer the ripple or waffle pattern simply for its appearance. They don't know much about extraction and think these patterns are more 'special,' so they tend to buy them.
@mycoffeeshow11114 күн бұрын
@@AnskarKong thank you for the info. Now I get it.
@Thomaskaloz14 күн бұрын
How many clicks on c60 ?
@mycoffeeshow11114 күн бұрын
@@Thomaskaloz I sold it long time ago so don’t remember exactly but something around 15-18 would be my guess.
@Thomaskaloz14 күн бұрын
@@mycoffeeshow111 ye ye they suggest over 33 for aeropress but doesn’t working I have tried many recipes
@mycoffeeshow11114 күн бұрын
@@Thomaskaloz Aeropress has a very wide range so you can experiment. How do you like the grinder anyway?
@Thomaskaloz14 күн бұрын
@@mycoffeeshow111 very good so far have it one week
@AnskarKong14 күн бұрын
hello , thx for the video ! did you try with and w/o paper filter at the buttom at wafo ss ?
@mycoffeeshow11114 күн бұрын
@@AnskarKong thx for watching. I don’t really know why, but I am intrinsically reluctant to use paper filters for espresso. I know that it might improve overall results but I don’t like the extra hassle. Still, Wafo has become my favourite basket ever.
@mryoyo774114 күн бұрын
I tried honey tow times i find it hard to deal with it.
@mycoffeeshow11114 күн бұрын
@@mryoyo7741 it can be tricky but it is often delicious.
@mryoyo774114 күн бұрын
@@mycoffeeshow111 i will give another chance just tor you 🤣
@ferologics15 күн бұрын
exactly the comparison i was looking for.
@ferologics15 күн бұрын
mainly because you have a lot of good info on the pesado itself, which this wasn’t supposed to be about but it was really useful for me
@mycoffeeshow11114 күн бұрын
@@ferologics thx for watching. I have a dedicated Pesado HE video as well 😁
@mrgazillions16 күн бұрын
"The best coffee youtube channel nobody watches". Your comments in one of the videos was so funny. Jack keep the coming , your videos are great and more authentic than the big productions from the other guys.
@mycoffeeshow11115 күн бұрын
@@mrgazillions I said it long time ago and it is still true 😛. Thank you very much for your support!
@stevegee21816 күн бұрын
MHW also has a 4 base Impact (force tamper) kit. It has the other wood top handle. This kit has the flat, waffle, convex, rippled bases that screw on.
@mycoffeeshow11116 күн бұрын
@@stevegee218 I have seen it on their website. It is a bit different. It only has 3 springs New tamper retracts after hitting tamping pressure while the previous one just clicks when you get to 30lbs.
@niro75016 күн бұрын
I apply the alcohol to my mouth. This is the way
@mycoffeeshow11116 күн бұрын
@@niro750 that is what we do here 😛
@mrgazillions16 күн бұрын
Keep the videos coming
@mycoffeeshow11116 күн бұрын
@@mrgazillions will do. Thx for your support!
@jimawhitaker16 күн бұрын
Very helpful. Thank you very much...
@mycoffeeshow11116 күн бұрын
@@jimawhitaker thx for watching!
@DoreK17 күн бұрын
It will be a hit if they introduce a flat version. I will never buy ripple tampers. It is not practical and does not have a positive effect on extraction (in fact, it is the opposite).
@mycoffeeshow11117 күн бұрын
@@DoreK hopefully at some point there will be a version with flat base. They left a comment here, explaining why they went for ripples.