New parts for the 2001 FXDX! - Vlog 54

#thrashinsupply #harleydavidson #mikuni
Making progress on the 2001 FXDX! But first a look at our new softail brake arm, a visit to our friends over at Mikuni, and of course TACOS!

[@neilcorey2900]

Steve is amazing. The shop that installed my HSR 42 used the Harley choke cable without switching to the Mikuni part like he showed Juan so the choke was always on. I brought the carb to Steve in a box and he showed me the problem, asked about my bike and recommended different jets and needle settings. He gave me the parts for free! I installed them and the bike rips. In 5 minutes he diagnosed and fixed a complicated problem that my shop could not. I knew something was off when the tuner that installed it said that you never need to use the choke with his setup. He had been making this mistake on everyone's bikes.

[@joynerseaman8211]

I will fly from NC to buy that green dyna fix it up and ride it back to NC. Let your friend know!! Yeah pretty serious. Y’all can film it and everything. Throw on some Thrashin parts for the trip back!!

[@BananaMan730]

Lying just for clout smh

[@russellseaman3509]

Based

[@joynerseaman8211]

@@BananaMan730 just down for the road trip of a life time. I miss SoCal😢

[@Josh-rp5qn]

Oh I know you will actually do it haha they would get great content with 😂😂

[@jaimegonzalez5650]

I would like to see this 😎

[@paulherrmann6862]

I used to work next door at the plumbing supply shop, Larry and Joes. Your videos keep brining back memories.

[@speedpig513]

I had no idea Mikuni was still thriving, that's awesome! Good to hear! Thanks for sharing!

[@Tofuandtwowheels]

How good was seeing the mikuni factory.

[@randyvanvliet226]

16:50 Look at that pipe, and then look at the pipe HD put on the 2018-2021 HD Sport Glide with the 107 CI. Almost identical in length. There is something very important about the length of that exhaust pipe and the amount of both back pressure and Horse Power that it makes. Think hard before you change out your double barrel shotgun pipes or shorten the length of your pipes with aftermarket exhaust systems.

[@EngineeringGoneWrong]

True, only thing that stinks though is the loss of cornering clearance. It's a tradeoff

[@brandonmacon3317]

Can't decide which one of them 3 bikes I like most..... 🤔... I'll take all 3 🤩

[@redbone6940]

Can't wait for part 2. Great vid. Thanks Bros.

[@twocupstwodrams7535]

Thank you for sharing, tacos are great, but this moment might be more significant to riding a motorcycle. Ride Free

[@guest4002]

Seen the guys a few mins ago lol just got done repairing my dyna & mega exited to put some trashin accessories on mine 😍 Saludos 818 boys

[@PistolPeteHD]

Sign me up for that brake arm for sure!! Thanks for the Vid guys

[@adamhill2788]

Juan in his natural environment 🤘🛵 I prob paid the electric bill at Mikuni back in my mx/sx days!

[@nickteague4376]

You guys need to make a trip to Tacos El Gordo. There may be one in the LA area but definitely is one in San Diego. Best pastor I have ever had !

[@genisys0069]

Lol, love the way he makes it seem that Juan is a genius, That stuff is easier than you think bro. They teach that stuff in junior high now. Catch up with the times dude

[@justintegge2391]

YES... looking forward to this build. I have a 01 fxd that needs fresh looking upgrades

[@THRASHIN]

Get ready for the next vlog!

[@jessellamas3309]

Super dope!!! Been waiting for a brake arm!

[@brandonmacon3317]

I still do the double click even on fuel injected bikes 🤩

[@daleclarkjr]

Dam another fire 🔥 vlog!! Let’s get it boys 🤙🏽

[@tackleboxbrad2988]

Nerding out! I love the r & d! Juan, you have my dream job. I got my degrees and certs to go down a similar path but that’s not how it’s all worked out. Still made it into the industry and have my own 3d printer and laser for my side hustle making bike/lifestyle related goods. Y’all are such a great group and I hope to cross paths someday!

[@narule2695]

"That was good porno shot I mean Pano shot" Jeez Juan 🤣🤣🤣🤣

[@jimbeam4111]

Lol. I program those scanners and cmms. Exactly correct about what it takes to do that job

[@THRASHIN]

Right 👊🏻👊🏻

[@sobelowtriplefo5623]

I'm from reseda but now live in las vegas feels like im home watching your vids used to drop by your shop in canoga to get fresh gloves you guys were hella friendly n usually busy, unfortunately i was left paralyzed from an accident in 2021 i miss riding like a mf, maybe one day ill regain the ability to ride who knows, i still use thrashin gloves to push my wheelchair cuz they help with grip n look dope asf haha, keep up these videos they make my day

[@randyr6642]

GOOD LUCK WITH YOUR RECOVERY , HOPEFUL YOU WILL RIDE AGAIN!!

[@sobelowtriplefo5623]

@@randyr6642 Thank you God willing.

[@sapper99]

That was a great vlog. I really like the behind the scenes content with your industry partners. 🔥👊

[@Berverlyhillbillie93]

trippin cheek is the best

[@Papo.7601]

Love the partnership between you and Juan wouldn't want to be around you guys after so many TACO'S LOL keep making great videos

[@cthompson594]

HEY LANCE AND JAUN when are y’all gonna make some mid controls for us bagger boys?????????????????????????????????????????????????????????????????????????????????????????????????👏🏼🤟🏼🤘🏼

[@byronr5502]

I bet Gabe's shorties are easy pull lever of some kind.

[@Calvinmob681]

I'm getting another FXDX and I'm going to try and order the same parts you put on yours.

[@mckane2]

Cabeza= head Cheek= cachete Not the same. Awesome vlogs, keep it up. 👍🏼

[@THRASHIN]

I think we were just trying to get cabeza

[@dayvon6015]

Hey Lance and Juan, any possibility on getting your floor boards, shifter and adjustable break lever for Indian challengers ? Love what you guys do !

[@alfredomiranda7002]

Juan is next level 🔥.

[@theodoreroseveltadept5272]

Barbacoa tacos are the best!

[@EngineeringGoneWrong]

I stopped counting I've scraped so many parts on my Sportster haha

[@jerricolaboy9305]

That DX needs some motor mounts. I seen that shake at 10:14🧐😂

[@THRASHIN]

Haha 100% in due time!

[@koolaidacidkilla179]

This is a great channel. Always tacos! Throw a s&s two throat on there.

[@anthonyfxbb9040]

Mikuni ftw!

[@stocksucks5984]

Looks like those tennis shoes will be good to wear sliding and scraping down the highway footless!

[@THRASHIN]

Life’s dangerous.

[@jimknapp4606]

Sitting in Aberdeen SD, watching your vlogs eating taco John's tacos.....could be better they are about a 4. See you later 😂

[@THRASHIN]

Lol! Right on

[@jbbrix1]

G’day Thrashin crew, can’t wait to see the brake lever on the market as I will be getting one, I know you guys haven’t finalised the design, do you think you can make the long arm of it adjustable for better height for braking or slightly have bend on the arm to give it a lift. Just a thought as I have a fxlrst and have all Thrashin risers bars pegs and floor board.so yeh you could say I’m a fan!!! Keep up with the vidz luv em, from OZ

[@jakeb.1318]

No broth to dip the birria tacos in? Miiiiiiid

[@ownda22]

you should try taco de cesos, which is brain!

[@damerkman]

Juan the cartoonist!

[@dominicerickson4490]

fuck yeah sick vid hope to ride to yalls store when i get out the army

[@unpocoloco3343]

Are you guys planning on going to Daytona Bike week?

[@03roadking]

😎👍

[@guest4002]

Damn juan looks familiar asf did he go to cphs

[@hunterhoward1994]

I would like to just come out ride around and eat some tacos with you guys!

[@hybridEP3]

I feel cheated we didn’t get to see part 2 😂

[@THRASHIN]

Get ready, part 2 gets good!

[@rickyhernandez995]

💪🏽💪🏽

[@shockley7500]

Do you have a solution for the dyna lowrider riser mounted indicator lights?

[@THRASHIN]

What year?

[@shockley7500]

@@THRASHIN 07'

[@josephlancaster7057]

You guys should ride down to Fullerton and try tacos Los cholos. Their tacos are next level!!

[@EpicKook]

Two Thousand Juan Harley Dyna

[@jaimieparsons3294]

What size is that mikuni? Could use the part number.

[@Webbrace]

42mm, part number 42-18 kit.

[@omw2fymom76]

Cabeza tacos are the bees knees

[@DuniaHanyaSementara]

✅

[@Money_Well_Wasted]

😎😎😎

[@weslytton-lk2zm]

“That was a good porno- pano shot” - juan, 2023

[@billyflanagan9657]

Dyna's suck compared to a fxr. I had a 1985 fxrs low rider it was so much nicer than my DYNA fxdx. Harley should have never stopped making the fxr

[@THRASHIN]

Well now you can buy a softail 😜🤣

[@billyflanagan9657]

@THRASHIN SUPPLY Building a motorcycle on a fxdx frame is like building a home on the San Andreas fault. Harley said they stopped making the fxr frame because it was too difficult. Omg what a stupid excuse. All the guys on unknown industries also prefer the fxr

[@California__Kid__]

That bike is gonna be sweet! I just posted a video of my LOWRIDER ST after modifying it. Check it out if y’all get a chance ✌️

[@KG-theknickerbockerkid]

0:55 is that a TI-83 graphing calculator? If Math and Physics teachers actually showed how this knowledge could be applied to things like motorcycles the world would be a better place. Assume Part 2 is going to be at the machine shop. Lets go.

[@liamfoley4452]

I’d love to see you guys come through and do a skinny tire Bagger build and make some parts for the earlier baggers. Love the content boys

[@kevinbausch5230]

Hopefully legend suspension comes on board, a chain drive is a must. Look out lance, the Juan is taking over. Love the products and videos.

[@mickeyking92]

Come on Lance, surely you know that a 1992 FXLR is an FXR model not a dyna!!!!

[@GawgaCracka]

Had a Mikuni carb on my 05 Nightrain, loved it, actually just bought a Mikuni throttle body for my '14 Street Glide, Mikuni are always up to some kind of Badassary!...You Guys do the coolest shit, Rubber Down Guys🤙🙌

[@chriskaercher5201]

Had a 42 m Mikuni on my ‘02 Roadglide (with Pingel petcock, KN filter and Reinhart pipes). That 88ci rocked!🤘🏻🏍️

[@russellbonvie4333]

Have you guys out there having the problem we see over here on the east coast That the roads are being washed away if so could you show us the mud slides and wash outs so we can see your mishaps that your having

[@CESMOBB]

Yo Juan u gotta take our boy to get some tacos de lengua!

[@shmole3884]

you guys should really consider making things for the old evo bikes very underserved market

[@riding2nowhere]

Do they have parts for my 2004 Yamaha Road Star Venture 1300 ???🤔

[@camerongibbs3187]

You guys HAVE to ride down to Escondido and try TJ Tacos, They’ve the trumbo and are the best tacos in all of CA!! I eat the Al pastor at least 3-5 times a week, I promise it’s worth the ride! 🤘🏻

[@jaredbrooks1196]

The mikuni bikes were sick for old school rnd bikes sad to see then just sit there in the dust they need to be used and rebuild but still cool to see them 😎

[@nooowayyjose]

3:49 wait?! How many years Juan? 😅

[@KG-theknickerbockerkid]

24:00 shocks working but a little rough bump

[@ralphhammond1107]

Fun one guys!! 🌮🌮🏆🌮🌮 keep up the taco reviews plz!

[@steveechaa3744]

Love these videos! Also they always make me want tacos lol

[@BrewTownBiker]

It must be Tuesday😀

[@jerrytaylor2743]

Great video guys

[@GreatApe1013]

What up🙌🏾✌🏾

[@chrismacharro1560]

Thats fuckin sick got to pull a mikuni right off their shelf!!! GET IT!!!!

[@THRASHIN]

Can’t complain!

[@JerBear_1989]

What mikuni I did you guys run on that fxdx??? Just pick up a fxdx as well so looking to do the mikuni set up on it

[@THRASHIN]

42mm

[@andrews.7027]

Im not an expert, but i thought cachete tacos were cheeks and cabeza tacos were cow brain?

[@THRASHIN]

Fuuu I dono… hahaha but either way it wasn’t my favorite 🤣

[@dagkarlsson7182]

I know this doesn’t apply to mid controls on a lowrider S but on a lowrider S with forward controls the break lever is to low to be useful.

[@ntdfmaverick]

Pretty cool, thank you for sharing this stuff! In my world, that new bike is already 90% good to go!

[@coasttocoast1180]

Sup Juan much respect on your skills behind the computer 🤙🏽💯💯

[@jonz5978]

Great video. Mikuni tour was rad. Thank you

[@rebel_ltz]

That old dyna is super rad!

[@THRASHIN]

100%

[@wickedchivo1399]

In Texas we call it Barbacoa and it’s pretty much a staple as far as tacos go

[@GiancarloFloyd]

More Of this please!