New Square Body Chevy Dump Truck is a BEAST!

HUGE THANKS TO:
Hummel's Auto Body - Mifflinburg, Pa
HT Performance - Middleburg, Pa
Rough Country
The Seat Shop - Use Code "TLR10" for 10% off
Kodiak Truck
Joe's Auto Parts - Sunbury, Pa
Mictuning
Merchandise: teespring.com/stores/top-line...
Follow me on Instagram @TopLineRacer
Email me: [e-mail]

[@tylerparadis2290]

Your not gonna believe me but that’s my dads old work truck that truck worked for the city of Norwich in Connecticut that was his personal truck at work.That is literally his truck I know cause of the dent in the passenger side fender he hit a telephone pole with it an caused that dent I can’t believe that truck made it to Pennsylvania so cool

[@TopLineRacer]

Do you have any old pictures? If so, send them over to me on Instagram.

[@tylerparadis2290]

@@TopLineRacer I have a few I’ll send them over

[@Ramcharger85]

These trucks i grew up on. My dad had a C30 w/454 and automatic he bought at his work was giving. Part of the reason Iike flatbed dualies. ❤

[@scotalvey4053]

Do a tune up replace the carb an fuel pump an a rv cam be as good as new

[@chevylandt.v]

Gotta love them squares they are all a beast. Put some glass packs and a cam in the 454 swap.

[@jboone8561]

That's a deal for sure. You have 2k with axles and hydraulics.

[@slabdaddy4209]

I love that square body with a little work she'd be sweet!!👍👍2000 was a good price

[@timedwards8225]

I used to work in plumbing installing leach Fields I had to drive one of those before if you idle it down so when you go to use Hydraulics you can do it calmly and graciously

[@DavidJones-hl5om]

Make it Bad ass Lifted 454 With headers Fuel injection Paint job New truck Bed, Interior the works. But for winter use just make it run better

[@robertl5168]

Thought you had my truck at first glance. I have a 84 k20 flatbed, 6.2 diesel. It is the same color with my high dollar paint job. Eight cans of blue Rustoleum spray paint. I have two black strips down the hood. Doesn't always want to start right away but runs good after I get her to start.

[@jesseleesamples]

These are my favorite trucks I’ve owned and built tons of em my whole life and 2k is a solid deal for a 4x4 dump like that. You could probly just about part out the running gear for that much. I know a guy who had one with a 6 inch lift and 35’s and it looked bad ass. I’ve always wanted a dump truck too and that’s pretty much exactly the one I’ve always wanted to get

[@jeffyrocks3564]

idea you take the cab and fenders and bed off the white truck and you put the the squarebody on the white trucks frame and use the white trucks moter

[@andrewmckenzie6551]

Awesome, love my ‘79 k10 with a 350 and sm 465

[@that11gmc36]

Get u a good 4 barrel carb and it will run a ton better.

[@dinotudisca3821]

The grill and headlights bumper in front are 81-82 era. Many of those cab and chassis were 4:56 geared

[@Saan455]

Square bodys are the best trucks ever

[@cjwebb454]

I got an 85 just like it they are the ultimate work truck and beasts

[@donovanhertzog4293]

The pto on my 89 c3500 wrecker when you lift up even if its all the way up sometimes it needs that extra "pull" to engage. My rollback is the same way.

[@1SeanBond]

Looking forward to finish watching this post!! So far a Super Awesome job Bro!

[@TopLineRacer]

Thanks man! Hope you have a great holiday!

[@1SeanBond]

@@TopLineRacer Happy Holidays my Friend Luv&Peace to you & your awesome family Bro! Cheers !🍻

[@brianeastman3547]

Sweet badass ride man, keep up the good work guys

[@windyshillhomestead5082]

Awesome video! I live in pa too and I’m picking up a 76 this weekend. I saw farm use on the back, did you register it as a farm vehicle? And did you have to get it inspected?

[@blakenissan07]

What oil do you use for the pto dump bed. Transmission d?

[@stubbysgarage]

I'm 22 and I honestly hate EFI. I can rebuild and tune almost any carb and you'll never have a smoother running engine than a good tuned carb. EFI is just to much to go wrong and to expensive to maintain

[@_tyy8121]

Couldn’t agree any more.

[@ryanheller7072]

Make sure to grease all the joints on the latch for the tailgate i work at a small weld shop in southeast Wisconsin and we fix alot of dump trucks that the latch system seizes from rust and lack of grease

[@WildhurstLodge]

When you have the box up use a 4 ft 4x4 Or bigger lumber to lay across the frame and wedge it up to the box and lower it till it hits it, like a door stop, then it can’t crush you:-) and as you lift your skid boom tilt the bucket forward slowly to help keep it level

[@TopLineRacer]

For sure. It's always a little scary getting under stuff like that.

[@covenanderson5123]

Build a custom flatbed for that think that’s be sick I mean the old one had rust anyway

[@lh98]

I just bought a 98 C3500 that’s 4x4 (thought only K is 4x4 but title says C3500) guess the transfer case was added afterwards? 350 gasser auto with 9’ fisher plow. Needs some work but she drove 1.5 hours home over a mountain. 3k don’t think she’ll be inspectable but she’s should plow the homestead. Curious how much weight I should put in back for plowing ballast and traction

[@imtukin17]

I don't think the wheels from the black dually will work on the K30? I believe the IFS front hubs have a smaller center than the lock outs on the straight axle, so they won't fit. Just something to check.

[@xKingdoms]

My uncle has 3 mint custom cabs just lying around I really wanna buy one

[@reggiekray270]

Etch-a-sketch design sweet truck she will have her uses

[@k.a.d.msrt8326]

Finally a squarebody! Yesss

[@UnblockedOne2]

About the same condition as an 85 F350 dump truck I just bought. Thankfully, mine has a 460 & runs perfectly.

[@CHEEKYRON123]

Rebuild like u did with the duramax with a 6 to.8 inch lift n the 454 would be awesome

[@brettdearing2898]

You should put a cam in the 350 and a couple other things and it will make plenty of power

[@trevordudley4140]

I say redo dump bed, put in the 454, and lift it.! I'm with you on that, would be absolutely sick looking.

[@j.j.clingman4083]

Oh one more thing is mine has the death wable but I found out that the bell housing on mine is cracked!! Have a new bell housing but have not swapped it out yet!!

[@countryboy5668]

I’ve rode in a c20 with a stock 350 doing 100

[@_tyy8121]

Loved the C20’s

[@BAKEMAN87]

Let's see some more videos of this Square!!

[@johnbowman6371]

Y’all should put a 12 valve Cummins with a 5 or 6 speed manual in that ole square body

[@8t7_foxbody99]

1989 k5 blazer front headlight and grill assembly and lift kit with new blue paint. (Replace the cab as well!)

[@dyalnwinchester665]

I'm 21 I've always had carbs and they are always reliable if you know what ur doing.

[@JohnSmith-kz1ll]

Tune up and timing she will be flying down the road. A buddy that has one pulls his small excavator and skid steer with his. It's a beast!

[@noahlarsen7368]

"Its gettin hot in here. Oh copyright" 😂

[@arthurshortlidge7188]

Is that a cab and chasis or a production truck with a dump bed put on

[@grg818]

23:47 is that a cts-v in the background ? (i have a 2012 ctsv coupe)

[@TopLineRacer]

Unfortunately just a regular cts. I'd love to buy a V someday.

[@offroadchamp1690]

@@TopLineRacer put the 454 engine in the square body

[@Beandiptheredneck]

I used to know an old guy who used an almost identical Chevy to haul firewood, except his was a 454, also a clapped out turd lol

[@TopLineRacer]

454 is definitely a better option.

[@robertmacdonald4518]

Yeah that front end is either 81 or 82, had about 10 of these various square body’s or was swapped in accident? But that wiper switch on dash is early 80’s as well. What axle ratio is it, I had a 86 with 4:56’s dump truck 55 was all it really had got to that speed quick. It’s around 160hp and high 200 ft lbs stock I believe.

[@TopLineRacer]

I'm not sure on the axles, ill have to check it out.

[@SchnelleKat]

Look at the title again, If it has Wipers on the Colum it's a 1984+ if its on the dash it's 1981-83. Those headlight bezels, bumper and grille was only 1981-82

[@coganwatts7054]

That’s what I was thinking as well

[@SchnelleKat]

@@coganwatts7054 I already knew all of this because I have like three or four of these 1981-82's

[@crushingvanessa3277]

Just needs a good choke adjustment. I like carbs but it's so hard to find someone who can set one up properly. Give it a tube grille and a very 1984 paint job. Or send it to the guys at the Pakistani Truck channel, they'll rebuild it and make it pretty.

[@tallgeeseheavy5311]

My favorite channel🤟🏾

[@TopLineRacer]

Thanks man!

[@kenworthcustomlogisticstru8096]

You should restore it and added a lift kit with some 37s tire also repaint it a very nice color.

[@nathanhowton1104]

I think you just need to work on the carb those trucks are vary reliable with carbs

[@Beandiptheredneck]

Dude lift it and put the 454 from the OBS in it 😝 that would be sick

[@TopLineRacer]

I'll see what we can come up with 😂

[@snoopysrc]

@@TopLineRacer do a 572 chevy big block and lift that bitch up

[@codygiesbrecht38]

Dump truck totally needs a lift kit. Also can’t wait for tho Obs duramax swap!

[@user-te6rb5to8c]

What did the skid steer run your brother? I like it better than truckmasters

[@TopLineRacer]

I don't remember the exact cost but similar ones run about 12-15k depending on hours/condition.

[@chadh2414]

I got a 75 Dodge more or less the same deal only a 120 hp gears are stupid low but it's not designed for speed but man it will take a load of whatever wherever you need to go

[@shauncry1917]

Your reliable for everyone’s actions tlr

[@jameslathrop6074]

You have the motor and tire and rims already it will make a cheap build for you but you don’t want to do something to loss the usability of the truck

[@matthewhancock4889]

Do the body work and put the 454 from the dually in it and make it a good truck for around the property

[@stephenvanover1718]

Leave the carbureted I have a 83 gmc 1500 with 350 cam run amazing fast had 6.2 Diesel but took out when I bought it and the dash u could get leather vinyl and just vinyl over it look decent cheap

[@danielfarnham1714]

1:31 I'm laughing because I'm from new hampshire we're on the day-to-day basis you see truck that the cab is ratchet strap on to the frame driving around.

[@TopLineRacer]

🤣🤣

[@39ctg]

That cab still looks decent. That truck looks to be in above average shape for a K30 C&C. The frames on all of those are so rotted out and cabs are all held down by straps. You actually have a diamond in the rough

[@TopLineRacer]

Thanks man! I'm pretty excited about it.

[@chrisgosselin6399]

I'm jelly of that gm d60

[@logansmith630]

Dump truck build!

[@tallgeeseheavy5311]

Could we get some TLR shades

[@TopLineRacer]

Working on some merch soon!

[@hollyschlag7681]

Keep it the same height and Cummins swap it

[@bradleyhazelwood462]

Hey i saw your video and and after the truck hits 1hundred thousand miles it resets back to zero and does it again i have 2 squarebodys one is a 1982 custom deluxe and other one is a 86 sierra

[@TopLineRacer]

They do rollover but my guess is that it is accurate because I believe this was owned by a college from new and generally those vehicles have very low miles.

[@metalfire4257]

I'm early as hell I'm ready for this video

[@TopLineRacer]

Appreciate it!

[@dancurrier6421]

rebuild the dump bed on the truck and take of the carburetor of change it to fuel injection

[@willgreen3665]

Brother i hate to tell you but you gotta wind that sucker to the moon.. Your short shifting the hell out of it and your looseing so much power

[@TopLineRacer]

Haha I know but I can't film when she's making that much noise 🤣

[@mikescott6647]

Fix this ol girl up, it's sweet! Y'all are funny and good peeps

[@TopLineRacer]

Thanks!

[@FAroundAndFindOut420]

definitely think you should put the 454 in the dump truck.

[@WielandBeneyDieselPowers]

You need to get jegs long tube headers with glasspacks

[@phillipgardner5836]

What a unit lol

[@daviddzedzy9194]

just got a barn find in lancaster pa,same 1 as u got mine red ,paid 500,00,,need it slave cylinder,has 90k on it lot deal out there need a bed sell u 4 that truck

[@Eraserhead1]

Send it steve has a guy with all kinds of these trucks for parts thats were he got the cab for his flatbed

[@TopLineRacer]

Yeah, that guy is actually very close to my house. I'm gonna hit him up pretty soon.

[@Eraserhead1]

@@TopLineRacer awsome i think this will be a cool build. A duramax woul fit in there nicely lol. Cant wait for the build to start

[@montyd9010]

That is a good deal

[@covenanderson5123]

Do a 4 inch lift

[@backwoodsdurmax5295]

If it was me I would do a 8.1 with the zf6 6 speed or a 12v Cummins 5 speed

[@stonyrun]

Rockwells and 54" tires

[@jekori6225]

You should try to rebuild the engine and cab

[@samsquires2877]

EFI for the win

[@tallgeeseheavy5311]

Bag it

[@landonwoods917]

Put a ls and a 6 inch lift with a flat bed and gloss black body

[@nickolasnelson1059]

Please do 6” lift kit on the truck it would be sick

[@christopherzawadski8458]

It’s gotta keep the patina

[@stafford_4.023]

Please build the square body

[@diddycateye6754]

Lift it and put 454 in it

[@jesseleesamples]

Y’all made me so nervous gettin under that bed with all the snow still in it, please don’t do that again lol. If you need to add more again you could bring the skid steer over and set the bucket under it as a safety

[@tadheath5856]

Santa is real you guys...I told you!!!!!!! He brought the truck for them early for the content...thank you Santa Claus!!!!!! 🤣😂😂🤣😂😂🤣😂😂🤯🤯🤯🤯 I would put a double stabilizer on that much weight. Then a 650 Edelbrock ....they run great on those 350's..had a stroke motor in my 85 Toyota with that setup....

[@jeremybarnes5320]

You have 4.56 gars. Really slow (off road haul/tow gearing) delete the smog give it a tune-up check out the kingpins for the death wobble and replace your steering dampener also run premium fuel and pump that idle up is just a screw on front of the carburetor just a tiny bit so it can stay idling

[@ATGray-uw3xr]

8.1 liter and 5speed swap 6 inch lift.

[@willgreen3665]

But sweet truck.. Is swap it and put a newer manual transmission in it... Or keep the granny low

[@benjaminzahrobsky7281]

Running on about 6 cylinders at idle

[@ATGray-uw3xr]

8.1 liter 5 speed swap. 6 inch lift would be cool. Don't do the typical ls swap

[@ropeyzkittlez9703]

i drive all my vehicles home plate less i useually toss insurance on it if i plan on keeping it, drove my tundra 3 hours away way down in pa all the way to ny no plates passed 3 cops that i seen lol, just drove a dump truck back another hr and half, traded a harbor freight welder post hole digger and a xbox for it, 04 chevy 3500 85k, 3500hrs, ruins, drives ,stops dumps 4x4 lol, have $600 into it with hole new front end

[@Carla-tz7qw]

A Detroit diesel would be killer in this truck.

[@jameslathrop6074]

That was a good price just put a floor in it so it will dump easily

[@spencerx7684]

Put the 454 in it from the obs Chevy

[@austinslease1721]

Should be able to drive that truck without the clutch fairly easy. Learn to float gears much faster than double clutching

[@that11gmc36]

Hauled it home thats what they done lol

[@j.j.clingman4083]

Hey you want to sell the dump truck?? I also have a 1984 Chevy 1Ton 4x4 4speed manual but mine has a big block!!