New Swiss Tech Uberall Multi-Tool Is Here!

[@namelesske]

This was missed opportunity for Leatherman to create a Mini Wave to replace the Micra back then.

[@hvacbudget8600]

@@namelesske Agreed!

[@hellsing56666]

It s call the Leatherman juice 😅

[@namelesske]

@@hellsing56666 That was bigger, and nail nick operated nothing like the Wave.

[@hellsing56666]

@@namelesske the wingman and leap were smaller with outside tools.

[@seanrobinson6407]

I agree. But the SOG PowerPint filled that void for me and I grew to really like it. Full sized wave for chore day/outdoors minis like powerpint for edc.

[@Motion_0112]

For me, the reason I think the scissors don't work that great on the Power pint is because is a left handed type. The position of the two parts that make the scissor is inverted compared to a right handed one. This affects a fair amount on how well it cuts because if you use it with the wrong hand, the way the force is aplied it separates the cutting edges instead of closing them.

[@TopDog8762]

Interesting, I am going to have to try it left handed. thanks

[@PedroLoyola]

pushing the lever with the index finger instead of the thumb also makes it better, I believe

[@mr.crumbles2557]

It also doesn't open very wide, would take a simple shortening of the spring bar

[@BX138]

I made the same observation

[@TopDog8762]

It good to see all the new models coming out. But I don't see this even coming close to replacing my Power Pint.

[@hvacbudget8600]

@@TopDog8762 Agreed!

[@dskennels210]

I got this and imo it's a step below the squirt and powerpint probably on par with Gerber dime .

[@ToolTechGeek]

I like the file on handle solution, any tool could do the same. Moreover I guess we could always superglue sandpaper to a handle and mimic that function.

[@hvacbudget8600]

@@ToolTechGeek True.

[@mattyvlietstra5017]

​@@hvacbudget8600it's a cool tool. I like it

[@nathanclaytor4083]

Straight edge scissors are for paper. Serrated scissors are generally used for cordage, just as well as a knife blade. I know most people will use what they have on hand to get the job done and basically multi tools serve that purpose, as a backup tool. Any multi tool without replacement wire cutters I wouldn’t purchase. However I find these an acceptable first time tool possibly.

[@marsbase3729]

Good point, the serration helps hold thick materials without them sliding the scissors. Also the amount of play between the blades affects the limit to what it can cut. You probably know this but just thought I'd add a little for others who read this. 👍

[@marsbase3729]

This would be pretty cool if it had better scissors and also flat head screwdriver/pry tool. I had the Gerber dime for years before upgrading to larger Leatherman clone with hammer/glass breaker end, it's doing great so far after about a year. Anyway the Dime was cool for what was but couldn't handle a lot force on the pliers due to it's size so I upgraded. But it's pliers were great for removing splinters I would sometimes get from pallets at work. In fact they made the tweezers obsolete. So if this tool has enough precision with it's pliers it could substituted a flathead in place of the tweezers.

[@hunterricard]

[swiss tech fanboy here] despite some negative reviews on the überall, i love it. im a huge fan of all swiss tech products (especially their black g-10 würdig knife), but i will say-i compared the überall to the leatherman squirt and there is definitely competition. dont get me wrong, i love leatherman just as much as the next guy, but i wanted something new. my squirt does the job for me almost all the time but i wanted something just a tad bigger without going into a full sized multi-tool. i think for the money and size and weight, the überall does a good job at keeping it simple and convenient.

[@Quizerno]

They need to start doing clones of the Leatherman Juice series. That's a form factor that has not been explored much.

[@KevinHamilton-c3u]

It almost looks like they are actually trying to compete for the whole left by leatherman for the squirt and such instead. But like you say it is a little larger.

[@RICH21716]

What a waste of space those tweezers and carabiner are, they would have been better off with some kind of flat head screwdriver. $30 seems a little high too .... this one's a pass for me.

[@haakonr1]

I’ll likely buy this and mod it. It’s the closest thing to a Juice S2 replacement I’ve seen. This with better scissors, a long reaching mini flat head (like on the PowerPint) and a larger flat head for larger screws and prying - and this would be just about a perfect lightweight EDC MT for me. Lengthwise the Power Pint is just right, but it’s trying to do too much for its size. All the tools make it bulky and heavy.

[@lukedogwalker]

Victorinox could muller the competition in this size class, with scissors and small phillips head drivers that work, and scale tools that are worth having (the tweezers, but also the pen!). They already have small scale pliers they could enlarge as a basis, or they could scale down the Swiss Tool. Either way, they could capture most of the small keychain plier-based multi tool market, given that Leatherman has resigned from it and left a big hole to fill. This market is very broad: every demographic carries keys.

[@hvacbudget8600]

@@lukedogwalker I agree! Victorinox could make a great mini swiss tool!

[@D2G10]

They should have added a replaceable bit driver alas next tool or Leatherman and this would have been a awesome tool. I wonder if it cand be modded to add it.

[@Wastedragon]

Doesn't bit driver implies bit set next to it and thus destroys the idea of a compact mutitool itself?

[@D2G10]

@@Wastedragon no it does not. it will come with only one reversable bit. But will also allow you to put whatever bit you need the most to carry. Also the flat bit set is very small in size. This is not a keychain.

[@ToolTechGeek]

The phillips may be able to fit in one of those square to hex adapters to use a bit set. Would be interesting to check if it fits.

[@D2G10]

@@ToolTechGeek I would try to replace Philips with in an actual flat bit holder from one of the NextTools

[@djd-fect1076]

Lol lost me with the para cord. I will stick to roxon lol ty great video

[@Errcyco]

$30 sounds fair.. I like the pocket clip too, nice touch.

[@haiku-dude]

The primary reasons to get a PowerPint are the 1/4 inch bit holder, size, and powerassist plier heads. This tools looks to have neither. IMO, the Nextool mini Flagship would be better then the Uberall. Am I missing something else?

[@hvacbudget8600]

@@haiku-dude Probably not. It isn't exactly what I was expecting.

[@KungFuTweety1]

Strip out all tools and sell pliers as is as a complimentary tool to a Swiss army knife.....

[@RpMcMurphy_]

I welcome all attempts. However I’d pass on this one.

[@kastapostgard5306]

Happy with my mini sailor

[@maxlvledc]

I just ordered mine!

[@hvacbudget8600]

@@maxlvledc Nice!

[@edwardfletcher7790]

LMAO 🤣

[@BX138]

The Powerpint is an OK tool, but it has three main things that are a dud. First, the pliers aren't precision pliers Second, there's no large flathead screwdriver Third, the scissors are left handed.

[@marksaint2936]

Still think the Powerpint out classes this offering.

[@hvacbudget8600]

@@marksaint2936 Definitely!

[@TheBentastic]

It's not for me. I'll stick to the Nextool mini sailor. I was kind of surprised why you didn't compare it with the mini sailor.

[@hvacbudget8600]

@@TheBentastic I may do that in the future. I was hoping it would be about 1/2" larger frame size.

[@tuzu1758]

I have three SOG. One by my chair, one in my EDC, and one in my travle bag. I tested several types the SOG filled more options then the others. Just don't break a part. Got zero assistance from the new owners of SOG.

[@hvacbudget8600]

@@tuzu1758 That's unfortunate!

[@BuckfastWarrior]

Man I really wanted to like this, might pick one up anyways for the size and aus-8 blade but so much space wasted on tweezer and extending clip. I like having tweezers in a multitool but it should be more like the gerber dime where you forget it's even there not take up half of one side and the extending clip is kinda cool but not actually useful. A flat head, a file, even one of those sim card ejectors would be more useful. Nvm wallmart exclusive...

[@CDXRK]

To be honest im alittle disappointed, this seemd like a dream come true but the density of tools in the PowerPint just blow this out the water for me. Real shame because this looked awesome, atleast there going in the right direction.

[@hvacbudget8600]

@@CDXRK I feel your dissapointment!

[@dherd]

Wanted to buy one until I saw those scissors “function”

[@tubezv]

What is pliers' thickness ?

[@hvacbudget8600]

3/16" or 4.7mm

[@tubezv]

@hvacbudget8600 thanks thanks

[@kathleensmith370]

Where is swis tech made? Juhvon last night said swiss tech knives and tools are made in USA- my info was China?

[@hvacbudget8600]

@@kathleensmith370 Swiss tech started out as a US company but was bought out by a company based in China. As far as I know only the heritage is connected to the U.S. at this time.

[@StefanKaizur]

my leatherman juice s2 just blew up.... found your channel looking for something to replace it with

[@hvacbudget8600]

That is unfortunate! This is a neglected multi-tool segment. My favorite option would be the Leatherman Leap you can still find used. Then the Sog Powerpint or the Roxon M1. The Gerber octane is larger but still lightweight. The Gerber crucial is an option as well.

[@StefanKaizur]

@@hvacbudget8600 I appreciate you.

[@jihangjiang4635]

don think gonna pay 30 for that scissors. 20 maybe?

[@ArtisanVaquero]

🎉🎉🎉good🎉 stuff

[@ruthlesssavage351]

Nice!

[@adawolf9483]

Once again, like in aaaaallllll the reviews of the powerpint, the scissors ARE LEFT HANDED, using the right hand without thinking makes them underperform.

[@hvacbudget8600]

@@adawolf9483 I actually did use mine left handed with the same results, off camera.

[@TylerSnyder305]

I think it's actually a very ideal size, but that size would be the only thing it has going for it. I suppose my opinion holds little water since I won't buy Chinese or Taiwanese multitools regardless, but this thing is just a major failure in design. The size is ideal to me, but they have too much wasted space. Not only by having that carabiner and plastic housing for the tweezers but also by having 2 tools on the outside and the rest on the inside. Just pick one or the other to avoid wasting space.

[@hvacbudget8600]

@@TylerSnyder305 It seem like almost a hit design wise but not yet there.

[@edwardfletcher7790]

The first multitool ever without a flat blade screwdriver !! But, you get a big STUPID pointless clip and an insane price.....SIGH

[@gonzgoesdumb]

Maybe a good first multitool for a kid who’s interested

[@edwardfletcher7790]

Buy them a Gerber Dime or Mini Sailor

[@richardhenry1969]

Big pass on that one.