#Newtype

Speed Build of the "MG MS-07B-3 Gouf Custom" (with custom L.E.D Lights) from Bandai . As always thank you all so much for your patient :3
Looking to forward seeing more videos?!
Stay tuned and be sure to subscribe:3
To help me out, make sure you enable your subscription notifications on KZbin! You can do that by going to one of our videos and clicking on the grey bell, located near the button that says your "subscribed". That will ensure that you'll see all new videos.
PATRON: / otakubuilder
EVAN DESIGN L.E.D. : www.modeltrain...
Background Music:
epidemicsound : www.epidemicso...
Artlist: artlist.io/
MODEL KIT:
NewTypeHQ: newtypehq.com/
AS ALWAYS THANK YOU FOR SWING BY

[@joshfaulkner2686]

Obligatory "this is no zaku, boy! No zaku!" Now that that is out of the way, great work as all ways my dude!

[@jett1007]

aaargh about to comment this!

[@krigsy7610]

I imagined Ramba Rall crashing through the wall when Otaku Builder called it a Zaku and screaming this 🤣

[@mn4a15]

Dude, I came for the model and stayed for the music. Good job.

[@tajaygordon9358]

I love that you’re revisiting old kits or rather you go where the passion is. It points me to looking at kits I never considered before. I followed your paint guide for my proto zero mg and it came out great so far 🙏🏾 so keep on sharing the content!

[@RedWolf777SG]

30:58 THIS IS NO ZAKU, BOY! NO ZAKU!🤣

[@ghostmonkeycustoms3766]

For an old 1.0 kit, it's fun to build.

[@akuma3158]

Fun Fact: This kit shares the exact same knee joints with the MG Kämpfer. (they are very limited in posability and extremely fragile) It would be fun to see you build and paint the MG Kämpfer, such an old gem of a kit.

[@jonatassilva2605]

Wich is ironic, since both in universe, are geared towards close/short ranged fights, so they would have great joints and articulation XD

[@slurpeexyza17]

You ended up GOUFING on this project???

[@varulvsmamma]

"Hey whats going on my Zakus and Zakuettes"

[@kadesoutherland3648]

Ive never noticed how gyver this mobile suit looked until you said it and now I can't unsee it

[@jonathontritto1990]

I cannot stress enough how underrated you are my friend. I wish nothing but utmost success for you.

[@rob3879]

I absolutely LOVE how you finished the 08th MS team kits!!! They look like they jumped right out of the anime, insane! Just the right amount of weathering effects, your attention to maintaining the color patterns, the LED additions. I would die to have these three displayed together, well done!!!

[@TheVanillaQueen]

Space Balls is a good movie to watch too much of. Mel Brooks is one of the grwatest comedic geniuses to bless mankind.

[@jerrybot3000]

Yay, more Zakus, finally. Zaku 2 MG 2.0 is great. Loved that kit so much I bought two.

[@tydshiin5783]

30:58 Me: This is no Zaku, boy!

[@KelgaCreations]

Great job on the Gouf Custom! MG Gouf Custom Ver.2.0 is way overdue, the Gouf Ver.2.0 came out in 2009, most of the foundation for inner frame is already ready.

[@jouanart]

Never been a fan of Zeon Mobile Suits but its portrayal in 08th MS Team and one of the best tactical battles in Gundam made me fall in love with it. Already have the HG version. I need this one now too.

[@naesneumantg]

I rarely comment on videos but I have to give you credit because credit is more than due. Keep up the great work; truly inspiring!!

[@highhunter1st]

The goufs eyes lighting up love that way to introduce the kit keep up the good work as for the zaku thing I chuckled a bit.

[@arbitScaleModels]

Wow really nice photography there at the end, what a trio. Your painting and weathering has really improved over the last year. Great job. I'm gonna follow your steps on my next Zaku.

[@jonatassilva2605]

This is no Zaku boy, No Zaku!

[@chalinp4886]

You got down building this gouf👏

[@joshfaulkner2686]

Would love to see an HMM shadow fox in a custom color scheme, or perhaps any mobile suit you are passionate about enough to deviate from anime accuracy and delve into a more personalized look. Keep up the good work!

[@RockSensation119]

Love your build videos man, ive discovered a lot of good music as a nice bonus!

[@johnP0908]

that looks awesome! what an underrated channel, you deserve more views and subs.

[@theMadMan74]

Fantastic work! Would love to see more of your work in 4K 👍

[@redcomet1717]

Great work bro this was a joy to watch

[@ricky1022]

they were supposed to make a RG of the gouf in 2013 but for whatever reason they didn't :( but a 2.0 of the custom would be sick

[@mistaj19]

Dang that looks fantastic, love it.

[@nightmare69metalmatt52]

Killer job some that mono eye

[@trietphan2702]

My dude, MG Providence 2.0 please!!!

[@mikeweiss790]

came out great . but i cant beleive he didnt get rid of those seam lines on the shoulders..beautiful job though..

[@papaarmo5028]

I've noticed on a lot of kits that guys say they cant hold the weapons or something similar I've never had that same problem

[@Octo-Genius]

You gotta do a Z'Gok sometime, they're even more intimidating and unique than the Zakus, and super iconic.

[@RobotoMK3]

I have some recommendations for zaku type kits if you want to work on them. There is the MG Psycho Zaku ver. Ka, MG Johnny Ridden or Shin Matsunaga Zaku ver. 2.0. Maybe on the simpler side, there is the RE/100 Efreet Kai and the Zaku II Kai

[@kevinggtv]

Awesome love it how you cuztomize it

[@Darksiege357]

Just bought this Kit as my first one, and it seems a bit daunting to create

[@oooppiikkk]

I notice you always just wrap the excess light cables instead of cutting them shorter. Is the non-conductive coating too difficult to sand off?

[@akron2763]

Ide love to see this with the conversion kit

[@thebeluvdtrex]

I been doing Gunpla for a coup[le of weeks tho but I keep feeling like I need to take it to another level...

[@chives6329]

Im terrified of early 2000s kits

[@calebbrittain5778]

You wouldn't happen to have where the direct places to drill on the parts. I'm wanting to try to do the LEDs similar to how you did them on the video cause it be pretty dang cool.

[@calebbrittain5778]

or any helpful custom LED installation guides that you learned from.

[@xxnike0629xx]

30:27 I'm surprised Bandai hasn't released a Ver2.0 for the mobile suits from this series. Perhaps we'll eventually get things like: - MG RX-79[G]Ez-8 Gundam Ez8 [Ver2.0] - MG RX-79Ez-8/HAC Gundam Ez8 Heavy Armed Custom - MG RX-79Ez-8/HMC Gundam Ez8 High Mobility Custom - MG RX-79[G] Gundam Ground Type [Ver2.0] - MG MS-07H-8 Gouf Flight Type (Norris Packard Custom) - MG MS-05Q Zaku I (Norris Packard Custom) - MG MS-06JC Zaku II (Norris Packard Custom) - MG MS-07B-3 Gouf Custom (Norris Packard Custom) [Ver2.0]

[@rx-93nugundam20]

@xxnike629xx Why do you even give a damn on things you hate so much, with all of your heart? That's why you're suffering so much, you love wasting something: time, effort, money. And you also really love repeating your mistakes... Are you a masochist? If yes, then that's not good. You need to consult a specialist. Also, why don't you go back in your *BOX* fort and try to build a kit from it, maybe you discover that you can finally overcome your *COWARDICE* towards building a kit again. Just _maybe_ ... 😐

[@Spicy_Magma]

Saw this at a store for $63 aud. Should I get it? The only thing I don’t really like are the screws

[@michaelt.lancaster9776]

The only thing I hated about this kit is the design of the hands! Please, Bandai-Hobby! 2.0 this one!

[@bigpinkstudios]

16:22. Uh oh, he goofed on the Gouf.

[@emanyu7556]

awesome video as always...but now I need to ask. the background music you used for the first of the clip around 4:42 - 7:42 part. Who is it? love the tune

[@Raigoth]

Do you only use acryllic paints? Im gonna be starting to airbrush soon and im just curious.

[@tristanmojica89]

do a zaku pls

[@darkmard]

Awesome build here man! One question though, how did you get the clear cockpit part? As far as I understand this kit's cockpit was an opaque yellow piece, not like the HG which is a clear orange.

[@darkmard]

sorry just rewatched the video where you show the runners and the clear piece is there. Glad to see that since I'm waiting on this kit to arrive here in a couple of months

[@asmariamoon]

"I end up goofing on this project." It ain't called the Gouf Custom for nothing.

[@stowlo]

We’re you spraying the mr weathering color? Did you thin it? Did you like the results vs brush and Solent?

[@maskedmaverick]

I've always ran some kind of thinner when airbrushing with the Vallejo Primer, do you have issues with it clogging? I'm curious. I'd like to skip the step if I can.

[@M0A0R0k00W0Y0L0D0E]

dude when are you gonna make a MG Geara Doga 🤨

[@KenwayTheBonker]

@1:50 This Is No Zaku boy, No Zaku!

[@RiezanC]

"This is no Zaku boy!" Also it's pronounced more along the lines of Guff.

[@Rob_Teh_Builder]

Norris**** Not Norm Packard lol

[@KrimsonWing]

31:00 That’s no Zaku boy

[@samuelahn4320]

what are the names of the two other gundam kits used at the end of the video??

[@elgatoire21]

What gage of wire do you us for the wiring

[@wylankaochari5588]

second

[@fapchan4474]

There is a 2.0 gouf kit

[@guillermocruz7989]

first

[@ChrisDeger]

This is no Zaku Boy NOOO ZAKU

[@Sirmoshi1]

It looks great ,but ... all i can see is those seam lines on those shoulders man ,10 mins some Tamiya extra thin cement and a bit of sanding and those would have been gone lol anyways keep up the great work !

[@MrAngelofflames]

Had the HG when I was a kid. Don’t know where it is now

[@charliebackus2394]

Third

[@meofjack9644]

( new type tools accessories and tools they have it lol more like they sold out and have a hard time restocking due to the pandemic and everyone getting sponsored by them and everyone getting into the hobby. 😂

[@charliebackus2394]

Hi

[@cotto1hunded]

Another great build with horrible music 😁