TKS StarLord - Great Basher // Kevin Langlois // 1s Cheap

More on Custom TKS frames from home grown FPV.
TKS StarLord Frame bit.ly/35qwuMa
Rubber Bands bit.ly/35mpUpZ
CrazyBeeX v2.2 Main AIO Board
AliExpress bit.ly/3hAVpUw
Banggood bit.ly/2S4yvKm
RDQ bit.ly/33UrMVU
GetFPV bit.ly/3ostkQu
BetaFPV 1102 18000kv Motors
RaceDayQuads bit.ly/3xosx6C
GetFPV bit.ly/39XfxeE
BetaFPV bit.ly/3cIDM1R
Amazon amzn.to/3xjxf5i
NewBeeDrone BeeBrain Camera Mount
NewBeeDrone bit.ly/2T0pXEM
PyroDrone bit.ly/3hOfman
AliExpress bit.ly/3u73GCl
RaceDayQuads bit.ly/33WTUry
Runcam Nano 3 Camera
RaceDayQuads bit.ly/2UCSJcB
Banggood bit.ly/2MRGzIM
Amazon amzn.to/35m8GsC
PryoDrone bit.ly/2Stnxij
Caddx Ant Lite Camera (better image, smaller fov)
GetFPV bit.ly/2Ry7Kho
RaceDayQuads bit.ly/35qFSiA
Banggood bit.ly/3yk4maG
PyroDrone bit.ly/3cGoXwr
Gemfan 2023 Prop AliExpress bit.ly/2TAy7nG
Banggood bit.ly/3eUe7Vo
RDQ bit.ly/3yoC7HW
TKS StarLord CLI Dump (EMU Flight) bit.ly/2SGqNXB
🔥Daily FPV Gear🔥
► Goggles Orca FPV.One bit.ly/3eAgsBw 💣
► Charger SkyRC Q200 QUATTRO bit.ly/2KgUd8i
► 1s Charger HTRC X4 bit.ly/2RNav9O
► Radio I use the Jumper T-Lite bit.ly/3ohjEXp
► Best Micro Batteries!! 💯 GNB 💯
Banggood bit.ly/2PoJglo
Amazon amzn.to/2Xw5VPr
► RDQ Batteries (Made by GNB) bit.ly/2ZsCob5
► Adhesive Welder amzn.to/2IpKKHj
► Emax tape bit.ly/3airvyv
► Same tape from Amazon amzn.to/3iJjTrT
👌🏽Affiliate links 👌🏽
If you would like to support this channel please use these links.
► Banggood - bit.ly/BG-NB
► RaceDayQuads - bit.ly/RDQ_NB
► Emax - bit.ly/3sn3AGm
► GetFPV - bit.ly/3rnx05U
► Amazon - amzn.to/3iJjTrT
► Heli-Nation - bit.ly/H-N-NB
► BetaFPV - bit.ly/BFPV-NB
► AirBladeUAV - bit.ly/ABUAV-NB
If you use these links to make a purchase I may receive a commission, which helps to explore more products on the channel, at no extra cost to you.
👍Reward Free Patreon + Discord
► / nickburnsrc

[@bhongfpv]

I just did this as my first build. Except I threw it on the TKS echo 2.5" frame with 65mm bi-blades. Going to try it on rcinpower 1202.5 11500kv with 65mm tri-blades next. Thanks for the guidance nick!

[@MCsCreations]

Fantastic flying and review, Nick!!! 😃 Those little guys are amazing! Stay safe there with your family! 🖖😊

[@umbratherios5614]

small drones are fun because they make the world look bigger, which is needed if you are limited to flying indoors or in your own garden.

[@Lucas_Shaolin]

Yes please. A 2s vid would be swell.

[@dronereviewman9580]

1s and cheap make me happy.....untill I break it LoL!!! Great review and Great flying

[@tarkusxfpv8010]

Nice review Nick and thanks again ! Been flying mine on 1102 13500kv AVAN 4 blades lolll didnt try 18000kv yet for this one . Oh and the TKS ROCKET 2s is a blast !

[@NickBurnsFPV]

Oh, I thought you had the 18000kv motors on yours?

[@Cre8ionz.]

TKS himself ^^

[@Soulsurferfpv]

Great video and footage. Please do one for the 2s 👍

[@jarodfpv1099]

Just ordered the Rocket Race, should have added this frame to the order as well. Nice one Nick!

[@PanagiotisKampakos]

I prefer 2s than 1s. I built one with armattan frame skyryder 114, 2.7gr 1.5mm, 1103 11000kv motors,jemchu 1,2s fc, 2023 props, runcam nano3, xm receiver,,,, weight 33GR. With bluejay 48khz, my old nanotech 300mah gives me 4 minutes unbelievable flying experience(my best freestyle drone ever) 😊... I will upload video in the next days.... It's unbelievable because it is flying like my nazgul and nobody hears it. That's why I am so exciting!!!Nice video Nick as always!!

[@NickBurnsFPV]

Let me know when you have the video uploaded. I would like to see it.

[@Cre8ionz.]

Running Emuflight ? 2S 1103 11kkV JHMCU 1-2S FC 48 khz 2023 bi-blade or tri ?! RC Nano3 XM Rx 2S 300 mAh Nano tech 33 g w/o Battery 🔋 4 mins bashing ??

[@Cre8ionz.]

That's my 1S 3 Inch: Happymodel DiamondF4 1S 5A 200 mW BT2.0 1S 450 mAh GNB 4,20 V LiPo (~13 g) 1202.5 11.000 kV Caddx Ant TPU Canopy Emuflight 3.4 Elrs Ep1 (ceramic) weight = 40,7 g VTX set to 500 mW which it accepts (range is better) but I think it's 200+.. Maybe 300 mW idk ^^ ExpressLRS Configurator Settings + Drone Pictures drive.google.com/drive/folders/1wxea_yJJ0FRcP9-zau-C1d2wKNwLIJCH?usp=sharing Caddx Ant Canopy by AngryDonFPV (thanks a lot): www.thingiverse.com/thing:4498930 TPU Printed without support

[@PanagiotisKampakos]

@@NickBurnsFPV my pleasure 😊 kzbin.info/www/bejne/rJ2UpYSVqMR9fas

[@Eff917]

For the rubber bands you could try cutting up a bicycle tube to a few mm wide pieces :)

[@NickBurnsFPV]

That is possible. Not something I would spend time on though.

[@Cre8ionz.]

That's exactly what I did.. Much better than rubber bands :D And black color matches the frame instead of orange yellowish or red color rubber band

[@guambra2001]

Yes 2s would be awesome.

[@Cre8ionz.]

9:44 min - HM DiamondF4 1S 5A 200 mW has programmable LEDs - soldering is super easy if you flip it upside down.. Here's my Cli settings if you do build it upside down: set align_board_pitch = 180 # resources resource MOTOR 1 B06 resource MOTOR 2 B10 resource MOTOR 3 B08 resource MOTOR 4 B07 Check twice after applying ! (might only work on Emuflight and the HM DiamondF4) Quite useful to have a backup off all "diff all" on your phone (not just the 💻 PC)

[@Nspecthergadget2010]

Yes 2s!

[@trajanfpv]

Looks good Nick! Keep it up.

[@manuelsolano7525]

Nice fly Nick like the new moves.

[@matred3538]

All these 2" quads are great fun. Probably my favourite class ether carbon frame or in a whoop. Your builds look great, wish I could get the frames to the UK a bit easier. I'm using a Larva x frame as a fairly light 2" basher, it's great with 1102 or 1103. ☺️

[@NickBurnsFPV]

Thank you. Yes, it would be nice if we had easy and low cost world wide options. We dream

[@Cre8ionz.]

Maybe the HM Crux3 Frame (5.9 g) - I use it on two of my 1S 3 Inch Drones..

[@Cre8ionz.]

Happymodel DiamondF4 1S 5A 200 mW BT2.0 1S 450 mAh GNB 4,20 V LiPo (~13 g) 1202.5 11.000 kV Caddx Ant TPU Canopy Emuflight 3.4 Elrs Ep1 (ceramic) weight = 40,7 g VTX set to 500 mW which it accepts (range is better) but I think it's 200+.. Maybe 300 mW idk ^^ ExpressLRS Configurator Settings + Drone Pictures drive.google.com/drive/folders/1wxea_yJJ0FRcP9-zau-C1d2wKNwLIJCH?usp=sharing Caddx Ant Canopy by AngryDonFPV (thanks a lot): www.thingiverse.com/thing:4498930 TPU Printed without support

[@Cre8ionz.]

Range test: kzbin.info/www/bejne/oIKol5uolseFras

[@drewthatsme6212]

I feel your pain my friend! What build did you go for? I’d love to get one of these! I also might just get a crux 3 instead 🧐

[@8BiT_fpv]

LoviN that #TKS Starlord frame! Got the Drax put together again, my beebrain fc is having vtx issues, now have the iflight alpha a65 whoop fc on it, los in the house it flys so smooth, hopefully today I can get outside and fly it.

[@M.TTT.]

Wonder if this setup on a 75mm whoop would be any good, am probably going to be trying it since I ordered the motors. Otherwise, I'll go to this frame maybe.

[@NickBurnsFPV]

In many ways this is the UA85 a 85mm whoop.

[@RubyS.1]

Like the frame alot wouldn't mind if it had the bigger motor pattern for some options but looks fun.

[@NickBurnsFPV]

In some ways I wish 3 hole motors was limited to only 080x and smaller motors. The weight difference has to be super tiny.

[@djjump13]

Just ordered all the parts. Thanks for the recommendation 😀

[@NickBurnsFPV]

Were you able to find everything in stock?

[@djjump13]

@@NickBurnsFPV RDQ had everything, and the frame was in stock 🙂

[@NickBurnsFPV]

@@djjump13 Nice. I always worry about part availability these days.

[@djjump13]

@@NickBurnsFPV you wouldn't happen to have couple of pictures of how you mounted the flight controller would you? And what are motor screws you used? The ones that came with the motors from RDQ don't fit. They look like M2 and think they are supposed to be M1.5🤔

[@NickBurnsFPV]

@@djjump13 The screws I used to mount the flight controller are m2. Are you having trouble with the canopy? they should slide right through the fc holes in the frame. The screws to use with the motors should have come with the motors. What motors did you buy? Most 3 hole motor mounts use m1.4 screws.

[@haraldensminger7243]

I´d like to see the Nick Burns 2s shuffle with that thing ;-)

[@DAZprojects]

Hi, i want to convert my uruav uz80 to a 2.5 inches toothpick but i'm not sure if I should buy 18000kv motors or 10000kv, (these are the only two options i have). Thanks 👍

[@NickBurnsFPV]

I think going to 2.5inch prop on the uz85 AIO could be to high for the 5amp esc on that board. If you do pursue it, go low kv and low pitched prop.

[@sixtofive]

I just saw BetaFPV has a new 1s 12a aio whoop board that looks like it may have some good potential for over building small tanky setups.

[@NickBurnsFPV]

Yes, it will be interesting to see how this board performs.

[@jackhiggins574]

Guardians of the galaxy always great reviews

[@backyardr.c.channel4732]

I recently built a 1s tks rocket race using betafpv 18,000 kv motors and mobula 6 flight controller and camera with gemfan 2015 bi blades. Also gnb27 connector. Problem I am having is when I arm it the motors spin very slow until about 5 seconds is there an adjustment i can make? I am running the stock tune only thing I did was change motor direction on the ones that needed it.

[@Grumpy_Trev]

how come we dont have a tinywhoop part picker like pc part picker ???????

[@NickBurnsFPV]

That is an excellent idea. Now being a pessimist: how much time and effort would it take to keep up, and who decides which parts are "best" in the picker. Ouch, maybe that's why we don't have one...lol.

[@Grumpy_Trev]

@@NickBurnsFPV well pc part picker has a program which updates the price for all the items so you can find the cheapest and it’s down to you to decide what parts you want to build and even better you can put a list of parts and share the list so everyone can get the cheapest parts. I would be so much easier for you because you wouldn’t have to put so many links just 1. I’m probably going to build a very similar drone to this one thx for the amazing vids

[@NickBurnsFPV]

@@Grumpy_Trev I would still have to build it and the table data has to come from somewhere.

[@Cre8ionz.]

5:00 min - GOTG - Guardians of the Galaxy 🌌 "I am groot" 🌳

[@quadcopterchameleons9289]

So I have a question. I just ordered an uz85. My plan is to turn it into a 3" 1s baby tooth quad. I want to I stall an xm+ and a tbs unify pro nano. Will the motors and the boad work?

[@NickBurnsFPV]

I need to know what motors your planning to use.

[@quadcopterchameleons9289]

I was planig to try using the uz 1102 motors that come with it. My concern was that they wouldn't reach on the 3" frame with the plugs. Do you think they can handle the 3" props? I realize kabab uses 1150kv.

[@quadcopterchameleons9289]

After watching your video on the TKS race rocket, I changed my mind. I just order the race rocket frame. Thank you for all you work and informative videos!!!

[@NickBurnsFPV]

@@quadcopterchameleons9289 A quick note, the starlord and rocket race both run 2inch props. The starlord might be able to run 2.5inch, but when I tried it the prop was hitting something, but I couldn't diagnose what I needed to change to resolve that.

[@quadcopterchameleons9289]

Ok great, thank you. I was planing on using the gemfan 2023. Thanks again Nick for all your wisdom. Cheers!!

[@michel_76_57]

Thanks ! yes, let's go the 2s version ! Look, links of gemfan are the same as the FC 😅

[@NickBurnsFPV]

Oops. I have corrected that section. Thank you for bringing that to my attention.

[@fabianlujan6092]

Hey Nick, would swapping all the components from the Mobula7 1S Elrs to this starlord frame work or at least the board? What are your thoughts?

[@NickBurnsFPV]

It would work, I am unsure how well the motors will hold up in crashes without the prop protection. It could be fine, I just haven't tested

[@Cre8ionz.]

8:22 min - gosh I love Emax tape !! 😍 (5 € from BG is quite expensive, but if you only use it on a TP it's going to last forever)

[@sburnham3]

Nick you have so great review videos it's tough to keep track of your favorites. Was thinking a quick highlight of you favorite 1 or 2, for 2021 and periodically for 1s, 2s and woop vs 2, 2.5, 3?

[@NickBurnsFPV]

Thank you. That is a good idea. I often have troubles between deciding what is "best" for me, vs what might be "best" for others.

[@sburnham3]

@@NickBurnsFPV Was only a suggestion if you were looking for content ideas. I can see the potential conflict or competing interests 'float' , 'agile and quick' ,'time in the air', indoors, outdoors 1S,2S, BYO, RTF, BNF digital, analog ... I guess it can get out of hand rather quickly. A lot of great reviews out there , but when is review obsolete.

[@8BiT_fpv]

Yes let's see the 2s version!

[@GKW25308]

HOT TIP: keep your rubber bands in the fridge, they'll last MUCH longer without perishing.

[@nerdlands6595]

unless you also often have blackened thin onion rings in the fridge too

[@GKW25308]

@@nerdlands6595 LOL true

[@Bisdak.3475]

Hey Nick, as for us that don't own 3d printer or have access to, I find gnarlyfpv Sub Atomic motor guards works on 3 motor mounts, works on 4 motor mounts too using only 2 screws. As always awesome review.

[@NickBurnsFPV]

Ah good info. Thank you

[@rjrcnunn4908]

Not bad, $130 1s build. Is this better than buying a pre built for under or around the same price?

[@NickBurnsFPV]

Some really enjoy the building process and thus it has more value than a bnf. I think generally we aren't wanting something exactly like a custom build the bnf route is less expensive.

[@rjrcnunn4908]

@@NickBurnsFPV I think it's a really cool and simple build as far as putting it together. Might try a build like this soon. Thanks Nick

[@AGZFPV]

Hey Nick. On the rocket race 2s the only motors I can find are Happymodel 13500 kv 1102s. Would those work well on 2s with the props you show?

[@NickBurnsFPV]

I have tried those on 2s, we will likely need to use a throttle cut or we burn through the battery pretty quick. Its hard to get the 10000kv motors right now. I have purchased most of what I have from aliexpress.com

[@AGZFPV]

@@NickBurnsFPV ok, thanks for the info. I ordered them and will try them out. I guess the beauty with our hobby is they can always go into something else. Thanks for the information!

[@AGZFPV]

@@NickBurnsFPV I also found some 1102 10,000kv Hglrc Aeolus motors that I wanted to try at Cyclone fpv, so I will try them both and see what works for my flying style better. I don’t go as flat out as you, so having a throttle cut higher kv motor may work out, but now I have options though. Again, thanks for your help and I enjoy watching your videos! Watching your video on the 2s rocket race was very informative and helpful! Can’t wait to rip this 2s and my 1s as well.

[@joerunge3915]

woah I love this thing its so small 1s and so fast and agile

[@NickBurnsFPV]

It does well doesn't it.

[@anthonycadejr3995]

Is emuflight that much better than BF 4.2 should I switch over to emu I haven't changed esc either should I try blue Jay don't have much experience at changing firmwares I have beta meteor 75 insides on tks 75 frame what do you suggest thx

[@NickBurnsFPV]

I wouldn't want to say one is better than the other. EMU works better for me and how I like to tune and fly. EMU has included some micro specific features, which is near and dear to me.

[@Kingbob556]

SHEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEESH

[@M.TTT.]

sus

[@Kingbob556]

@@M.TTT. amogus

[@Cre8ionz.]

0:56 min - 💯 % throttle - I guess my 1S 65mm (modded BetaFPV Hx100 SE) has a bit more punch (running the PMB tune)

[@Cre8ionz.]

Have you tried 2 blade ?

[@Takeover738]

Will i need to buy my own screws for canopy and AIO board?

[@NickBurnsFPV]

yes, I would get m2 12mm length screws.

[@djs134]

For this setup do u think the race rocket frame for this 1s setup would be ok? I didn’t see the weight of the starlord frame alone so don’t want to add more weight. I mean they are both 2.5mm thick so maybe similar weight?

[@NickBurnsFPV]

Oh yes, A 1s rocket race will fly very very similarly to this 1s TKS Starlord

[@NicuIrimia]

Nick! get a bicycle inner tube and cut your own hundreds of indestructible rubber bands!

[@GKW25308]

Guardians of the Galaxy

[@porshacarroll9600]

Hey Nick Teddy here.. the site says these 1102 18000 KV motors can take 2s🤔🥴 is that true?

[@NickBurnsFPV]

maybe on a 40mm prop, but I certainly wouldn't on any larger prop.

[@zeroblade6599]

How does the 2s compare to the tinyhawk2race? Do you have that one? Or the 1s starlord to a th2race on 1s?

[@NickBurnsFPV]

In both cases the 2s has a fairly substantial performance increase.

[@M.TTT.]

Wonder how the 2" compares to the 3" babytooth

[@M.TTT.]

just saw in a past video you prefer the smaller.

[@preclubek8251]

can you fly this frame with 1002 19000KV?

[@NickBurnsFPV]

yes, but I would use biblades if on 1s.

[@SH-ry2xi]

Could I use my mobula6 HD FC and VTX with this motor and frame? Would it perform any better than a stock mob6 hd?

[@NickBurnsFPV]

you can, but without the prop protection the motor shafts will very likely get bent when crashed.

[@SH-ry2xi]

@@NickBurnsFPV isn’t that what you’re running in this video? I meant with the same motors and props as you are running, just the mob6 fc and vtx

[@NickBurnsFPV]

@@SH-ry2xi Yes, in that case you can use the mob6 hd fc. The vtx is part of the fc.

[@SH-ry2xi]

@@NickBurnsFPV awesome! All I need to get then is the motors, props, and frame! Thanks for the video and replies as always!!!

[@NickBurnsFPV]

@@SH-ry2xi Sure. Happy building.

[@manfromth3m0oN]

I'm quite interested in doing something with my tinyhawk 2, would a frame like this and some new motors (maybe designing a 3D printed canopy for the TH2's camera) be any good?

[@NickBurnsFPV]

The main board of the tinyhawk is going to be something we would have to overcome. I am not sure its worth it. The props are going to overlap the board in some way, and then as you mentioned a canopy design that fits somehow. The Tinyhawk board has the separate but attached vtx that makes canopy design a bit more challenging. If you really like to tinker it could be a fun project, I don't expect the performance to be the same as the weight will be higher and the prop thrust blowing on the larger tinyhawk main board.

[@manfromth3m0oN]

@@NickBurnsFPV Thanks for the reply, I guess I better get saving and put together something with more suitable components. If I can find a reasonably priced way to get a StarLord frame in the UK trying a build like yours seems to be the way I'd want to go

[@NickBurnsFPV]

@@manfromth3m0oN Unfortunately, shipping to the UK is likely about as much as a frame. :(

[@Cre8ionz.]

4:10 min - but how much fun EXACTLY ? ^^ :D

[@ho-xo8my]

Rubber bands. 1 bicycle tube give you hundreds.

[@tonhabraken9339]

Yes.. show us the 2s!

[@lazyhug1230]

could i use this to replace mobula 6 frame

[@NickBurnsFPV]

Yes, and kind a no. Will the parts fit on this frame yes. But its no longer a prop protect quad, and the 1mm motor shafts of the mobula 6 will likely bend or break on crashing.

[@Cre8ionz.]

@@NickBurnsFPV 1,5 mm needed (1mm ducted - Eachine Trashcan broke 5 times.. Switched to 1.5 mm no problems anymore)

[@MrCrowleyandhisdrone]

Great vid. Thanks for sharing Nick.

[@MrCrowleyandhisdrone]

How does it handle in the house?

[@NickBurnsFPV]

lol You really want me to push my luck don't you. :)

[@MrCrowleyandhisdrone]

It's inevitable. Push it.

[@KaizerTest]

Hey Nick awesome flying as usual. So these Flight Control AIO boards have the FC, receiver, and VTX in one board? VTX too?

[@yumahase]

Yeah, I have the exactly same FC on my StarLoad frame (except I use it for 2s) and it's got FC, ESC, SPI Frsky receiver, and VTX that supports 25mw-200mw.

[@KaizerTest]

@@yumahase Pretty awesome! I'm still kinda new. I was under the impression that a VTX was always either piggybacked to a camera or as a separate unit. Cool. does these come with FLYsky protocal receiver built in as well?

[@NickBurnsFPV]

There is a flysky protocol version, but its not as popular and often not carried in US store. The banggood link in the video description for the crazybeex should have a flysky version.

[@timrodriguez1]

🤠👍

[@curlymaplebandit3107]

Hey Nick, moved to fpv from photo drones, been flying a mob6 hd. Betting I had 15 hrs on her before moving her internationals to a mob 7 frame. Have crux3 on the way as well. Am a retired aircraft mechanic and I’ve got the itch to build something, but not feeling confident enough to just start ordering parts! Is/are build “kits” available? If so, any recommendations? Thanks for spending the time on these videos, they’ve been invaluable.

[@NickBurnsFPV]

There are a few kits, in the micro quad arena they are far more limited to my knowledge. The kits that come to mind aren't sold in the US. We have to go to Banggood or AliExpress. The two kits I am thinking of are the UZ85, and the UZ80. Both are "plug in play" meaning we don't have to solder. There are other kits that have been released a while back that do have soldering, the tyro79 is one I can think of in the moment.

[@curlymaplebandit3107]

@@NickBurnsFPV thanks Nick. That’s kinda what I figured. Will give it a bit more time, feeling just knowledgeable to be dangerous at this point ( just to my wallet).

[@NickBurnsFPV]

@@curlymaplebandit3107 lol, this hobby is dangerous to our wallets :)

[@DougEfresh.]

It's cool but I get so tired of 3-4 minute flights. If I can get closer to 10 minutes then I get excited. Things are moving in that direction it seems with technology getting better and components improving. I'm thinking about getting rid of all my stuff that can't get at least 6 minutes and that's alot of fun drones and alot of money, but it is what it is.

[@NickBurnsFPV]

Keep in mind when comparing flight time flight style plays a huge role. If we are flying with less camera angle, taking fewer 180 degree turns and fewer punchouts, greatly increase flight time. I don't think this combination on the battery I was flying will get 10mins, but likely closer to 6mins if we are avoiding many of the items listed to some degree, with two batteries we would get 12mins.

[@Cre8ionz.]

9:35 min - remove all 4 motor Plugs - on the board and the motors and you save around 1 g of weight - but most likely it's not worth the time - because the TP will end op in a tree sooner or later :P 😂

[@davidanderson6222]

It’s seem to have good enough zip for 1s. Don’t think you need 2s, might fly heavier May have to build one. I can make many 1s batteries. Lol. Btw , I can solder these lil buggers in my sleep now 😵‍💫

[@NickBurnsFPV]

Did you see the TKS Rocket Race on 2s? Here kzbin.info/www/bejne/l5mbhJSegbWGaLs

[@MrLaserpowered]

Let's see 2s !!

[@NickBurnsFPV]

I should have flights I can put that together.

[@StuckOnAFireHydrant]

How long does the gnb27 connector last when compared to something like the bt2.0 or ph2.0 connectors? I recently made a post in r/tinywhoop just to see how often people need to replace their ph2.0s to see if there is a longer lasting option out there.

[@iamnobs1462]

the problem is in ph2.0 if you have the rolled pins the dont last long

[@NickBurnsFPV]

I haven't found a need to switch out the GNB 27 or the BT2.0 connector yet. As imnobs commented, ph2.0 tends to break down, we haven't see the same with GNB27 or BT2.0

[@Cre8ionz.]

Link to the poll ?

[@Cre8ionz.]

Get XT30 for a TP - KababFPV said it So do it 😂 Also it's cheaper (XT30) - BT2.0 is expensive and you can't buy GNB27 ??!

[@kevinsmith9420]

Work, work, work. Somebody has to do it!

[@alexmoil6256]

dear, perhaps you can help me. I have this crazybee, but the video signal is very bad... an idea ? good video

[@iamnobs1462]

try change the antennena and the goggles antenna also

[@alexmoil6256]

@@iamnobs1462 googles work perfectly with 5 other drones. I had try to change the antenna nothing better (Cu antenna for a new cu antenna) from an other board. Thanks for help

[@NickBurnsFPV]

Sometimes the antenna length can be off. I believe we need the exposed portion of the vtx antenna to be 12.9mm.

[@alexmoil6256]

@@NickBurnsFPV mine is 15mm long, and not large

[@alexmoil6256]

Do il need to cut it ?

[@Aar0n2009]

Nice review man!

[@bay3287]

Why the gnb27 connector and not a bt2.0 or a xt30?

[@NickBurnsFPV]

I have more batteries with GNB27 than bt2.0 or xt30. We can certainly use those as they are both better than ph2.0

[@bay3287]

@@NickBurnsFPV ok that makes sense and thanks for the clarification

[@NickBurnsFPV]

@@bay3287 no problem.

[@morpheusone7755]

Brilliant style on these I want to do a small 2s version for this elrs system, I can't find these mini toothpick style frames anywhere where I am I'm easy but a larvax style uz80 style is what Id like , I have two whoops I want to convert, a 1s 65mm and a 2s 75mm. I use bangood usually for some things, but it's a bit of a wait isn't it.

[@NickBurnsFPV]

The wait is hard. Maybe these will become more popular and someone will start carrying them to a distributor you have easier access to

[@tonhabraken9339]

Those rubber bands!!! ;) ..

[@valden]

Curious how those bands compare to the ones on fpvcycle. I have a bag of those ones and they are decent

[@NickBurnsFPV]

Not sure. I looked to get some of those, but ...."sold out".

[@valden]

@@NickBurnsFPV indeed. Appreciate the recommendations I'll have to pick some up

[@Cre8ionz.]

Use bicycle tubes ^^ Cannot destroy them ^^ 3€ here in Germany 🇩🇪 for a tube and you can cut like 9⃣ 0⃣ 0⃣ 0⃣ out of it 😂

[@Cre8ionz.]

Don't wanna be a Patron, just wanna donate a few bucks - PayPal ?

[@NickBurnsFPV]

Its okay. Nothing needed. This is my hobby/fun time.

[@Cre8ionz.]

@@NickBurnsFPV okay hmm.. Never try'd Patron.. Let's see..

[@iamnobs1462]

where can i find that canopy ?

[@NickBurnsFPV]

Its the newbeedrone beebrain canopy. I have four options linked in the video description.

[@AndresRodriguez-sb6ef]

First let's go

[@Kingbob556]

SHEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEESH

[@yodayedi2325]

.

[@cliffandrews]

🚫AliExpress and Bangbad🚫

[@NickBurnsFPV]

You don't like either? Good or bad the manufacturers seem to prefer AliExpress.

[@Sully365]

Guardians of the Galaxy

[@NickBurnsFPV]

Yes, I so couldn't come up with at in the moment. I left as its more fun to have it than record again to clean it up :)

[@Sully365]

@@NickBurnsFPV Been there :)