TorqueFlite A-727 - 1969 Dodge Charger 500 Rebuild

Nick's Garage Gear Shop
teespring.com/...
-----------------------------------------------------------------------------
Nick's Garage Patreon page. Thanks for your support!
/ nicksgarage
-----------------------------------------------------------------------------
Nick's Garage is on Instagram!
@nicksgarageofficial
-----------------------------------------------------------------------------
The 727 automatic transmission has become legend among muscle car lovers all around the world. Tonight, Nick is staying late to show us a little of what goes in to refreshing and re-assembling this iconic auto component. And this transmission is all the more special, as it comes from the 1969 Dodge Charger 500 that Nick is restoring for Eugene.
-----------------------------------------------------------------------------
Nick uses lots of tools.. here are a few.
NewAge Cabinets
amzn.to/3o2qdOH
Sunex Worm Drive Engine Stand
amzn.to/3ojkD9o
Moroso Carburetor Drain Cup
amzn.to/3ic2yav
Lincoln Electric Handy MIG Welder
amzn.to/3lWTgBo
Moroso Jet Tool
amzn.to/3n0k1q0
Holley 36-181 Jet Assortment Kit
amzn.to/33bcgWe
Alert magnetic work light
amzn.to/3qe6dtE
ProLite hanging work light
amzn.to/2HDBp3U
Nightstick LED Rechargeable Under Hood Work Light
amzn.to/3klp6cB
-----------------------------------------------------------------------------
Nick’s Garage is created with passion, and the following gear.
GoPro HERO7 action camera
amzn.to/2HAfCtv
GoPro HERO8 Action Camera
amzn.to/3cDf7u5
GoPro HERO9 Action Camera
amzn.to/34s5fjl
Insta360 ONE X2 360 Camera
amzn.to/3GsP9ba
Canon XF400 professional camcorder
amzn.to/2EF0ABE
Canon 90D DSLR
amzn.to/3jaRZ8F
Manfrotto Befree Travel Video Tripod
amzn.to/33amqXm
Manfrotto Xpro Aluminum Video Monopod
amzn.to/33bpSAE
Rode VideoMic Pro+
amzn.to/2GaVJIR
Rode Microphones Wireless Go
amzn.to/2EEcV99
Saramonic Blink500 Pro Wireless Microphones
amzn.to/3j2IARZ
Zoom F1-LP Lavalier Body-Pack Recorder
amzn.to/2S2WiXS
Zoom F2-BT Digital Multitrack Recorder
amzn.to/374pKUS
Lowepro ProTactic Camera Backpack
amzn.to/3ib7End
Lowepro Multi-Purpose Backpack
amzn.to/2EDA63o
Nanuk 970 Waterproof Hard Case
amzn.to/34s8xmD
Dinkum Systems ActionPod PRO
amzn.to/2S8dFqo
DJI OM 4 Gimbal
amzn.to/346O6LH
Lume Cube Panel Mini Video Light
amzn.to/3ibSgqS
Lume Cube 2.0 Light
amzn.to/30bfFCw
Aputure MC Video Light
amzn.to/3cFcYOH
Litra LitraTorch 2.0 On Camera Light
amzn.to/348oL3Z
Apple iMac with Retina 5K Display
amzn.to/3i721ql
LaCie Rugged USB-C 4TB External Hard Drive
amzn.to/2EJq40S

[@randybehenna3081]

Nice an early morning vid from probably the best mechanic alive

[@NicksGarage]

Thank you Randy. Glad you are with us.

[@ericball6000]

he is.

[@bleesal]

I love this guy - simply the King of Mopar powerplants. Thank you Nick for sharing your incredible knowledge with us, right down to the 727 transmission.

[@thomascowart2634]

It's fun watching Nick work and I don't get dirty .

[@howardgarrett7865]

Every time I see that yellow charger it brings back memories of a yellow charger my dad owned that I learned to drive in Long time ago now lol

[@franklindreidsr518]

Good morning, everyone from West Haven, CT. Have a beautiful and safe day.

[@NicksGarage]

You too!!

[@petermontagnon4440]

My Father always told me , "Take your time!!!! That way you know that it is done right!!!" That advise never did me wrong!!!

[@OakLawnSpeedShop]

Mom always told haste makes waste…

[@eugenecastles7475]

Good morning Nick, and George, I've been up since 5 AM waiting for this video, Mopar in the morning, 727 time here we go!

[@NicksGarage]

Good morning, sir. We are very pleased that you are with us again. Hope you got some sleep!

[@danohstoolbox]

good morning eugene it is -9c hear in Ontario Canada

[@eugenecastles7475]

@@danohstoolbox Good morning Danoh, it's getting very cold in Ontario, have you had any snow yet? It was 4 deg C this morning here in Texas when I got up. Hope all is going good for you, everything is good here.

[@josephf593]

It's all slowly coming together! Before you know it your car will be at Indy, I've been following the build from the beginning.. congrats Mr castles, she's going to be a beautiful ride!

[@eugenecastles7475]

@@NicksGarage I'm always ready for another Monday morning episode of Nick's Garage. The getting up early thing is leftover from the military, even after all these years. You did a fantastic job on the video George, it like I was in the engine room with you watching the rebuild. I can't wait for part 2.

[@ewconway]

Automatic Transmissions are complicated and have tons of pieces. Hats off to Nick rebuilding this 727 Torqueflite transmission. 👍

[@davidrasch3082]

This episode is worth watching at least twice.

[@NicksGarage]

Thanks, David.

[@MrGardman]

Probably the best trans ever built. They were simple and really tough.

[@NicksGarage]

Right on. Even the name is cool!

[@98dodge360v8]

Ssshhh dont tell the Turbo 400 guys 😉

[@mikestackhouse9001]

Yes, the 727 was stout and when set up correctly, it could take all the pounding you could give it and still get you to the next race!

[@warrenpuckett4203]

Also light weight. Easy to work on. BUT there are two versions of inside parts. Don't mix them. Well you can mix the plates and clutches. You just be one plate and disc short of having a high performance build. Those are good for 340-360s but not good for 383/Hemi/440s. That is why the 4 barrel 69 Town and Countries are missing he engines and transmissions

[@blairestandley6224]

Brings back of Memory's my dad and I back in 60s and 70s thanks

[@NicksGarage]

These cars can take you to the next town, or they can take you back in time. Thanks for watching.

[@randybehenna3081]

More than welcome Nick I get to learn from the best who would not love it

[@NicksGarage]

👍

[@robertwest3093]

I have the utmost respect for anyone who can successfully disassemble and rebuild an automatic transmission!

[@elpuerco6059]

Nick, you know what really takes a long time to do? Doing it twice!

[@NicksGarage]

Hah! So true.

[@ryanclay959]

Iremember back in the early 90's when I got my very first car, a Volare Station Wagon, my first Mopar and I pulled the 318 C.I motor and the 904 transmission and I put a 360 C.I motor and a 727 transmission in my Volare with a race only 3rd stage shift kit and a C range cam, dual valve springs, double roller timing chain, headers with .....cant remember what the name of those mufflers is called but they where red tubes you could loik right through and they had baffels in them ....darn...glass packs or....it will come to my mind later, I put a high rise edlebrock 4bbl aluminum intake and 600cfm edlebrock carburetor and as a teenager I got a few too many speeding tickets back then.

[@NicksGarage]

Sounds like a wagon that could really haul the groceries! Cherry Bombs?

[@ryanclay959]

@@NicksGarage Yeah, Cherry Bombs sounds right. I built it to race in the Road Runner class at the local speedway but they changed the rules that year to the Road Runners had to be stock.... so I put the windows, wipers, lights, and all back in it and drove it on the street and before the rule was that if you won the race, one of the other racers could buy your engine

[@ryanclay959]

@@NicksGarage It took me a year to build my race car back then with high school and a part time job and I was wanting to race. I am not sure if that speedway changed the rule back to what it used to be? I enlisted in the military and have not been back to that speedway.

[@johnhillside9105]

I've, my gosh, gee. Thank you. A wonderful, experience with mechanical engineering design.

[@NicksGarage]

Glad you enjoyed it!

[@robertorhymes]

Nick's Garage has accepted the mission to rebuild Eugenes 727 transmission It means one thing It's The Nick's Garage Monday edition Nick is going on the attack installing a heavy duty clutch pack Sticking with the factory specification will ensure you're putting yourself in the optimum situation with no rattles or squeaks or unsettling vibration Getting ready for assembly Nick has an awesome memory He's got skills any car nut would envy Every component tried and tested put together the way Dodge suggested means this 727 won't be bested Eugene will be able to gently cruise and even at the track he can't lose His Charger 500 has got it all I can't wait for the engine and transmission install If your classic needs a fix you better give Nick's Garage a call!

[@NicksGarage]

Thanks Roberto, always impressive. Your skills with a pen, nothing short of aggressive.

[@robertorhymes]

@@NicksGarage Your content deserves an award I hope the rhymes are a worthy reward

[@eugenecastles7475]

Awesome job on your latest "Rhyme" Roberto, you really made my day, and you have an amazing way with words. I look forward to all of your "Rhymes". Keep them coming!!!

[@robertorhymes]

@@eugenecastles7475 Waow Eugene I'm just priviliged to witness the construction of your dream machine built by Nick and the team I'm chomping at the bit Looking forward to seeing the rear tyres lit Your Charger 500 is legit!

[@markszczepaniak5888]

Very impressive with your words, you must of been or should of been a car salesman, I sure you could sell to anybody.

[@georgedeas966]

John Cope makes top shelf parts for Mopar automatics. Cope Racing Transmissions built a 727 for me back in 2004 for my bracket racing Duster. I was very pleased. Good guy to deal with. Glad to see you using his parts.

[@griffittsgarage]

100% worth every cent!

[@ws678ta]

I did the same thing . Bought a good manual, did some parts research, and took my time. At 64 yrs old. Never too old to learn. I have rebuilt 3 904/727 's and they all work perfectly. No more repair shops, like Nick said....you cannot make even 1 mistake.

[@robertsanders6463]

Your favorite room, That is interesting because I worked for years in the clean room environment do helicopter component overhaul. Take care and stay safe!

[@Airforce1Gunny]

My 1980 Plymouth Volare had one in it. Worked great in the demo derby.

[@woolyhighlander7280]

I raced the same 727 for 22 years, first behind basically street Early hemis, then behind a 13.5 -1 Alky 392, and then behind a Blown & Injected stroker Hemi, and the only breakage was the front Pump Drive dogs, if I snapped the throttle in gear. Under load it took all the Power and sometimes burned Rubber right thru the lights. Those things are Tough !

[@n6mz]

Another Marvelous Mopar Monday! Thanks Nick!

[@NicksGarage]

You bet! Thanks for stopping by.

[@jimflys2]

Not only is this the coolest car channel, it is one of the finest examples of a music appreciation class. Where else could you hear George Bizet, shred guitar, jazz tunes, country, Latin? It's a musician's dream. Being one who plays and listens to everything, I can say this is a treasure. As I rebuild brass instruments restore old drums, I watch Nick do his thing. Fantastic. Mopar lover here.

[@NicksGarage]

Wow! Thanks so much.

[@christopherbiondi7397]

I am not mechanical at all. But I could listen to Nick for hours. Man is a wealth of information and his passion for these cars and his craft is contagious. He is a credit to his profession.

[@davsaltego]

You sir, are an artist. Watching you work is like watching any other fine artist.

[@mfc4591]

Nick is old school cool. Back when there was no You tube, no cell phone etc, we went to repair machines with hand tools and the parts plus the manufacturer's manual. Of course the man who taught us knew his job, but you cant remember everything, so the manual was your friend, do it right, as the manufacturer specified.

[@robertforget6369]

good morning Nick and team great story time have a great week grandson says good morning

[@NicksGarage]

Good morning! Thanks for watching together.❤️

[@jonclark8155]

I know some transmission guys. They say rebuilding transmission is like putting a puzzle together. Good job nick.

[@HammerHeadGarage]

Just goes to show you that sometimes it is better if you do it yourself. Great Job Nick. I enjoy shifting a transmission.

[@NicksGarage]

Sometimes!

[@jamesrobinson9062]

Nick is the the man they don’t make them like him anymore

[@madmanmechanic8847]

Nick here is and old school trick on 727s. When I graduated from Auto Tech School AAI in Glendale Arizona I went to work for Plymouth dealer and worked around Mechanics that had worked on the 440 six pack cars and Hemi cars new. And they worked on the old Monaco and Polara 440 Police interceptors . One of the techs told me back in the day they would pull the valve body down and pull the accumulator spring out for the piston on one two shift on the old interceptors . He told me it would make the one two shift firmer and quicker . I tried it an man did is shift quick and hard ! I rebuilt one of these a long time ago at school a student brought in a 69 charger and I rebuilt it at school I was surprised it actually worked . One of my instructors told me to use type F on the transmission he said that real expensive green ATF you buy for racing is just type F with a dye in it. Boy that was a long time ago.

[@billjamison2877]

Nick. I never had an issue tearing down or assembling an engine. Automatic transmissions are another story. I felt intimidated by all the parts, seals, etc. By watching you assemble this transmission, you gave me the confidence to give it a try. I've learned so much watching your videos! Thanks a million for giving new life to these classic cars! Bill Jamison from Linglestown Pennsylvania.

[@richardmoerke9329]

This is why you are good. You knew something was not right. Had that gut feeling! Look into it and over and into it and that’s right you fixed it. You fix the problem. You found and worked on a problem that you felt was not right. You say to me what is the big deal! You know almost every one out there would have put that together. If that snap ring is on it’s gone! This is the thing that makes you a true mechanic. NOT! !! Just a man that put parts together.

[@sgoldie3235]

“Every piece counts!”- nothing but the best from Nick!!

[@carmudgeon7478]

Nick being careful and thorough. That is why he is successfully building a trans that he does not have every part function memorized. If I didn't do my own, I'd trust him to.

[@anarac4445]

Nick you are a doctor of engines and transmissions.

[@captaindew3106]

in this world there are 2 types of Torque Flite trans there is a 3speed and a 4speed. the 3 speed are A904 and A727 and the 4 speed are A500 and A518. the A500 use the fluid pan of the A904 and the A518 use the fluid pan of the A727

[@thefinalroman]

There is a 3rd Torque Flite. The A413 3 speed....

[@TheDutchPathFinder1]

Love to see the Master at work. Hopefully there is somebody that can fill his shoes in time. Because this knowledge must not be lost.

[@CZ-kz7ug]

52:24 That look you gave the camera said it all. Your viewers felt it too. Your patience and reassuranace is what keeps customers coming back and gives you peace. Not rushing.

[@ericball6000]

Dr. Nick, glad to be here today, thank's for your how to video's, cheers. btw big Al is the best at doing a burn out.

[@NicksGarage]

Thanks Eric. Hope you enjoy what you see.

[@closertothetruth9209]

excellent intro Nick re diy transmission rebuilds we learnt the same hard lessons decades ago, bought the books followed the books and amazingly first time diy ever and it worked and for many years, i had my doubts being inexperienced , today we have youtube etc its even easier today.

[@79tazman]

I have rebuilt some 904's and 727 trans they are pretty easy to do and there is one book they have out that gives you step by step instructions and shows you how to do some tricks to it and how to build them even stronger then factory. I use the Raybestos kits and never had a issue and they shift great

[@NicksGarage]

Good job!

[@dominic6720]

wait what book is that?

[@Auggies1956]

@@dominic6720 dotto's!

[@warrenpuckett4203]

Also light weight. Easy to work on. BUT there are more than two 727 versions of inside parts and engine bolt patterns. Don't mix them. Well you can mix the plates, baskets and clutches. They will work behind a 383 2 barrel. (Also if the pack has the ASSEMBLED right feeler gap. There also is total gap for entire assembly (very important)) Also do NOT put it behind high horses and torque. You also will be just be one plate and disc short of having a high performance build. There are also different clutch baskets (drums) Those are good for 340-360s but not good for 383/Hemi/440s. That is why the 4 barrel version of 69 Town and Countries are missing the engines and transmissions. Also the disc brakes. 727 with bronze plates were either police or racing builds. A real factory race HEMI/440 will have those. I worked in a tranny shop in the 70s. IF you do rebuild a real police vehicle. Hint: Good source for the heavy duty build. The only thing for direction choice is Park, Reverse, Neutral and Drive. LOW is not an option. That is how to can tell it is not a replica. Also anything past D is locked out on the steering column. The column may or may not read that way. Some are locked out on the trans linkage. Nothing stinks like a old Ford FMX. It also likes to spit the special stink, burnt tranny fluid, on you, like a upset camel.

[@mansonmydog]

Great attention to detail Nick. I was 19 when I rebuilt my 727 in my 71 340 Duster with a manual reverse shift valve body. It worked perfect and wood chirp the tires in 2nd everytime driving normal.

[@pappy017]

Mornin Mr Nick! Have a Great Week!!

[@NicksGarage]

Good morning! You too, Pappy.

[@JoeCnNd]

your story about your transmission reminded me of when I was an 18 year old kid getting my car brakes worked on and getting robbed then as I drove out the sway bar starts dragging. I started doing all my car stuff myself from then.

[@MrMike-fm8bp]

Nick is the master of patience !!

[@LeeBlaske]

George, you've outdone yourself! Love the choice of Bizet's "Habanera" from Carmen for the snap ring section at 36:50. Castanets are pretty snappy. I'll need to show this section to my operatic soprano wife. Nick's Garage is not only a source of MOPAR info, but culture, too. ;)

[@NicksGarage]

Thanks for listening. 😁

[@jfk64kennedy95]

Nick, must be great pride when someone trusts you to bring their baby back to full glory....much respect

[@donlemme898]

Good morning. Great content. Learned more about the workings of this great design in one hour than Sifting through countless other sources. Patience, attention to detail, and the value of experience. All in one hour. I can imagine how Eugene must appreciate this video. Have a great week everyone.

[@NicksGarage]

Thanks for watching, and for your thoughtful comment.

[@eugenecastles7475]

You are right Don, I really appreciate this video on the rebuild of my 727. It's not often that you get to see your trans getting rebuilt. Nick's attention to detail is amazing, I knew that he would not leave that snap ring tight, and remove it to see what was wrong. Experience is priceless, you know when something isn't right. Good catch Nick & Manny.

[@nickpanaritis4122]

@@eugenecastles7475 . I have done many 727s. That little lock ring always has a gap. The issue was the ''Washer'' behind the new steel planetary was not sitting correctly.

[@eugenecastles7475]

@@nickpanaritis4122 Hi Nick, After your first attempt installing the snap ring, I figured something was not aligned properly. This was proven on the second attempt when the snap ring fit correctly, and had a little play, just like all of the others you have done in the past. It was a good catch, and I have done the same thing many times when something just doesn't feel right. Thank you for your attention to detail Nick, I know that the 727 will be better than when it was first built. I enjoyed this video very much, and can hardly wait for part 2.

[@darrylvanholton9056]

Just a trick I learned from a ford tech school. (applies to any automatic). Try to install the steel and friction plates with the rounded edges on the inner and outer teeth up. Theoretically, the rounded edges, (made when the plates were made in the die cutter), will allow the whole pack to apply smoother.

[@nickpanaritis4122]

Good info. Thanks.

[@C.S.Sensei]

You are a professional Nick, I'd rather you build my trans correctly, than be able to tell me what the parts are called. Knowing and doing are too different things. I love your attention to detail. 👍🇺🇸

[@bogiewheelman71]

Back in the day 🙃 of auto tech class a Dodge New Port had a 727 rebuild done . The road test did not go well as it would not shift in drive right . Every thing was spick n span cept the rear governor housing was over looked and the spool valve was stuck . It was cleaned out and put back in with out removal of the whole transmission and worked flawless again .

[@dontrufit7889]

Thankyou Nick, I enjoy these videos and Thankyou for allowing us to read your encyclopedia which I have none of this knowledge and it also can be passed on to future generations who want to learn this craft. A big thumbs up

[@jimgiordano8218]

Hey Nick, Your building a classic transmission listening to classical music, very cool. I have rebuilt my 727 in my International Harvester Scout II 4X4 adding a few tricks like installing a bolt in sprag and building the clutch packs to 426 Hemi specs, extra springs and clutches. Over my many years, I have also I have built 727's, 904's, C-3, C-4 and C-6 trannies, they are simple and fun. I am thinking about rebuilding the trans in my 2013 Toyota Sienna, The only pain in the butt part is it's front wheel drive and I don't have a lift, but that's down the road a piece. Plenty of time to think up something to get it high enough to get it out.

[@douglasb9105]

All of the sudden I have new respect when I jump in my car and just throw it in gear.🔧🔧

[@fpsmith466]

Howard Simpson (1892 - 1963) was the inventor of the Simpson planetary gearset which formed the basis of the 3 speed automatic transmission. Ford in the early 1950's was the first company to licence the Simpson patents, however did not produce the Simpson design until the introduction of its C4 and C6 transmission in the mid 1960's. GM licensed the Simpson patents in the mid 1960's with the introduction of the TM-400 and TM-350. However, Chrysler recognized Simpson's design, licensed and introduced the Torqueflite 727 transmission in 1956. Both Ford and GM tried to go their own way but relented once they realized the value of Simpson's design. An interesting era of automotive history.

[@nickpanaritis4122]

WOW. Thanks for the info.

[@jondoes7836]

As far as I know, the 727 transmission in my 1969 Newport is original and has never been apart. Works Perfectly.

[@mikestackhouse9001]

"I need another thou". It pays to check and re-check the fit of everything! By using the vernier caliper Nick was able to find the proper spacing. Good work boys! Loved this video!

[@rodrigocampos510]

Professor Nick, class is session. Dr. Nick is the operation room. ! Love it!

[@danohstoolbox]

good morning nick George and everyone else hope all is well with you

[@NicksGarage]

Good morning, Danoh! Thanks and have a great week!

[@danohstoolbox]

@@NicksGarage having great week sorry i missed the livestream i am just to busy in the evening

[@NicksGarage]

Not to worry, Danoh. We understand.

[@bullast2046]

So what nick means is a VERY thin layer between the case and tail housing.. You’re the MAN, Nick! Tell Vascili what’s up!

[@RestorationObsession]

The 727 is one of my favorite transmissions. Had one in a 73 440 Charger many moons ago. Miss it a lot!!!

[@bdubz5150]

I can't wait to see Eugene's finished ride. The suspense has been built up more than Nicks Challenger build. I used to own a Barracuda Mod top in that same yellow color. I had to sell it when I went into the Service because my folks were moving once I was in. I wish I still had that Barracuda.

[@russellbluewolf6427]

a good friend of the family is a transmission specialist and ive watched him many a time take apart transmissions and rebuild them..he told me if you take your time and pay attention to what youre doing, its really not intimidating at all..your video just proved him right

[@dreuxlescell3184]

Interesting piece of information about snap rings is that the crisp or non rounded side carries the pressure load of whatever the snap ring is retaining. You can feel the difference by rubbing your finger across the edge. The crisp edge faces away from whatever you are retaining. Find a new snap ring and check it out. I learned this while at tech school learning how to repair transmissions for the dough mixers you would see at a pizzeria or bakery. Pass it on!

[@spirosmaris890]

Beautiful mastronick.....🙂🙂🙂🙂

[@keithharden7844]

I was subscribed to precision transmission. I’ve seen enough of taking them apart. I wanna see them put back together.

[@jamesm9766]

Monday morning with nick 👍🏻👍🏻👍🏻👍🏻

[@NicksGarage]

Right on. Thanks for watching!

[@xbgtfella]

Hey Nick. Dont 4get part 2 of the segment. Love it.

[@bigbearvenom6145]

Glad you took that snap ring back out to verify snugness because that definitely was an issue their has to be some clearance for some growth expansion good catch. That could of caused fatigue cracks, premature wear, and metal shavings which could end up cutting internal seals.

[@mikestackhouse9001]

Big Bear, he knows how it's supposed to feel from doing it himself so many times in the past.

[@deanwharepapa8561]

Job well done Nick, your experience in automotive is priceless

[@vro1899]

I JUST found your tear down video yesterday! I'm rebuilding my Torque-Command 727 (the AMC version) this winter, and have been reading and watching as much as I can! This will help me greatly!

[@NicksGarage]

Right on! Welcome to the channel.

[@pauljohanson7643]

My old Motor Transmission manual says to use "Door Ease" stainless stick lubricant on those clutch piston seals for installation. I found a stick of "Door Ease" at a local parts store 35 years ago. It is kind of like a wax stick. I still have that same stick and use it on every 727 and 904 I rebuild. Just smear it on the lip of the seal and on the beveled area on the drum where the seal contacts the drum. I have real good luck sliding the piston in then. It works better then anything else I have tried.

[@nickpanaritis4122]

Door Ease. OK. I will try it. Thanks Paul.

[@richardjackson3557]

To do the seals use a thin fleeder gage

[@jumpinjojo]

Feeler??

[@nickpanaritis4122]

I have done so many times.

[@galegregory341]

Nick you're doing a good job on that training you can eat off the walls of that transmission it's so clean

[@richardschonk1095]

I love the 727 transmission. To me it is the best. You should watch the videos by Richard at precision transmission. He knows everything about transmission. He has over 40 yrs under his belt.

[@tomking1890]

Gut feeling on the snap ring works every time. Great decision.

[@Vetteman372]

You did good on trans,i have learned more today than 35 years at the ford dealership I work at. This is why 1 or 2 mechanics only do trans overhauls at dealerships

[@markszczepaniak5888]

Nick I must say I truly enjoyed this video since I also rebuild my 727's also, been a few years, but going to redue one soon, thanks for the refresher course and your personal techniques. My wife came downstairs while watching and told her look how good Nick is, even his wife allows him to use the salad bowl to soak his clutches in tranny fluid. Lol She didn't buy it. I think you may convinced some of the subscribers that they can also rebuild there own 727 or A904 now. Now they can save a ton of money also if need be. Best video to date! Thankyou.

[@nickpanaritis4122]

I try to as much as I can to help viewers do their own work at home. You have to see my emails I receive with questions on '' How To''. I answer as many as I can. Always a pleasure. Thanks for watching.

[@nickpanaritis4122]

By the way, it was a salad bowl at one time. When it was time to upgrade, took the old bowl to the shop and kept it for many purposes.

[@billyjoejimbob56]

Good to see you doing transmissions also! Not to nit pick... but... at about 14:10, the "low gear one-way clutch" you showed is a "roller" type with one round race and one race with ramps, one for each roller. "Sprag" type one-way clutches have elements that look like a figure "8" in cross-section and both inner and outer races are circular.

[@richdelgatto2522]

Eugene, well done on the 5 gear steel planet, esp with 500hp.

[@leksaku2]

Nice to watch a professional work. I have used a paraffin candle or ski cream to install the seals. Paraffin glides well and does not affect the composition of the oil too much.

[@patrickst-georges4008]

Wow now i know how it work, tank you nick. Perfect for the snap ring lol making sure it right fit in place

[@OlSgtLove]

Nick and Krew , just love the shows Nick . I love your shop and how well thought out it is . After the Army I turned wrenches for 30 yrs cars and Diesel trucks....I kept my ol 1970 GTO running ...I love the attention to detail you do Nick , that's where the quality and tricks of the trade are ...love the story on after 2 Trans failures yall said the heck with this and did yourself...smile ...now showing people a thing or 2 or 3 ..Love your channel, as I said before my Dad was a Dodge man and live his Chargers ...so seeing them in the shop brings back memories of Dad & me working on his car .... You have a great talent for showing ,explaining, and making it easy to love Nick's Garage!!! All the Best to you Nick ,Manny,Leo ,and the Rest of the Krew there .. 👍 👏

[@nickpanaritis4122]

Thank you Sgt.

[@91rss]

one thing a tech that rebuilds airplane gearboxes said, was when cleaning, the last clean is with acetone or alcohol so it gets other cleaners and their dried films off the wear surfaces, as they stop oil fron getting in and doing its job the best it can,, Bearings as well,, the room they rebuild bearings in is cleaner than an operating room as well..

[@timruiter5460]

Great video. I'll be doing the 727 in my Challenger. I've done Turbo 400s and C6s but the 727 will be my first.

[@eddiethedodgeman6758]

Nick I have been watching you for years now and sir you are the best. You are truly a car surgeon. Thankyou sir for passing on your knowledge. God Bless

[@mikesmart4967]

Mike smart Tulsa Oklahoma Nick you do a fantastic job on everything you do and I'm so proud of you but we also got to give Manny a pat on the back he's your other right hand man I'm glad you have him have a blessed day sir

[@411BLMPRO]

Thank you Nick!

[@thejeepdoctor]

I’ve been building transmissions for years. These are definitely one of the easiest ones to build. It is a simple but great transmission.

[@sparkomatic100]

Nick love your past experience stories... A wealth of knowledge! TY!

[@Charles-ui4rx]

No Nick you got to give yourself more credit than that man from what I can tell you're an expert on the 727 transmission

[@MikeJBlues]

Awsome lesson on the 727. Thanks Nick 😊

[@nathankerry3256]

Great video on 727 thank you nick for sharing what you have learned over the year's on how to rebuild a 727 an thank you George for be there to film this for all of us to watch awesome video like always an no better way to start off a Monday morning you guy rock an may god bless you guy's

[@coolestchannel4413]

Nothing like real tv here💪

[@scottkovacs7634]

Great show on the transmission Nick.

[@frankmoore159]

Can’t wait to see that charger complete/?the exhaust note I’m waiting Patiently

[@philhunt3908]

It was interesting to see how the transmission goes together never seen one apart like that thanks for the great video

[@tomquinn607]

Nick said it took genius to design the 727 automatic transmission. What's it take to understand it and rebuild it intuitively like Nick does? What a great video! Here we go!

[@nickpanaritis4122]

@Paul Dana . That is totally correct. If you can work with your hands, you can do it.