Today, we'll take apart the Spyderco Tenacious lightweight, and do our best to get it as dialed in as we can.
Пікірлер: 62
@pugchronicals1374 Жыл бұрын
#1 TIP ON CENTERING THE TENACIOUS NEVER TAKE IT APART!
@p.r.parasztragu36904 жыл бұрын
Love how he reaches for the compression lock at 9:40 😄
@mrsw9164 жыл бұрын
Your surprise at there being 4 washers present reminds me of the first time I took my g10 tenacious apart...and found 5
@Antimonyish3 жыл бұрын
I emailed them about that, back then they were using washers to make up for tolerances and center the blade. You'll notice that the liners and especially the lockbar is much thinner on these newer Tenacious models. They look like crap on the inside to be honest.
@chimchu32322 жыл бұрын
Mine only had 3 lmao. Still works fine and it's close to centered. Just a beater knife for me so it's not a big deal
@spdk19944 жыл бұрын
Hello there Nick, first of all thanks for your amazing work and amazing channel, keep up the good work. Regarding the centering problems of the spyderco tenacious lightweight (also the g10 version) I found out that usually the problem is a bend in one of the two steel liners. Mine had the show/presentation side inner liner completely bent/kinked outwards and straightening it back up solved the problem and centering was perfect. Again, thanks for everything, have a wonderful rest of your day, bye now.
@nemo99193 жыл бұрын
Thank you for tip
@zvonimirbertic25314 ай бұрын
Haha....it worked. Thank's. 🍻
@col81794 жыл бұрын
Watched KZbin for as long as I ca remember and I’ve decided this is my favourite channel of all time. Thanks you taking the time to do what you do Nick.
@AlU-yp1mj7 ай бұрын
I’ve got two Spyderco Tenacious knives. Disassembled both, reassembled them and no matter what I try to do. The blade centering strongly favors the non lock side identically.
@coreystafford70084 жыл бұрын
Spyderco has decided that “light weight” markets better than calling it FRN, I can’t see why else they’d call something like this “light weight”
@pitiedvod4 жыл бұрын
So much this. Compared to the LW para3, the new light weight versions don't really compare as all they are, are swapped over scales from G10 to FRN.
@tehloling14 жыл бұрын
I just hope we can get a lightweight resilience at some point.
@tehloling14 жыл бұрын
@@nonamnonam5332 Yup
@shnider1564 жыл бұрын
Good video Nick! Got one of these in full black yesterday went to change the clip over to tip up right and one of the screws just fell into the hole as there were no threads present. Was hugely disappointed especially as paying nearly 80 dollars for this in the UK. Quality control on these knives is getting worse in my opinion. Now the bother of having to send it back!
@yonatansela417010 ай бұрын
you saved me thank you very much
@clintonlewis12614 жыл бұрын
Thanks for advice,I've bought watches and knives on Amazon!👍
@AnelTheFirst2 жыл бұрын
Just got a tenacious. It's my first spyderco and really like the shape and feel of it. But it's sooo stiff. If I loosen the pivot, the blade gets of center and is pretty much touching the liner. Tried everything but can't make it better. What would happen if I only use one washer per side? Then maybe I can tighten the pivot down so the blade is centered and still have decent action.
@clive-t.m.d79552 жыл бұрын
This is the antidote to buying a knife that you don't really need - thanks Nick for showing us reality 👍 Shocked by the poor quality control and generally (given the price) unsatisfactory nature of this Spyderco product 😝 Disassembly gives you the (sometimes ugly) truth, no question.
@centermass34543 жыл бұрын
Great video. A link to the bit drivers you were using ? I just ordered the 10 Wt. Nano oil per your suggestion in another video. I am having trouble centering the blade in the frame of my Tenacious and acheiving the desired tension at the same time. Any suggestions ? I have had it for 3-4 years, I guess that means no warranty. Should I take it apart? Do I need new washers ?
@NickShabazz3 жыл бұрын
nickshabazz.com/tools
@dray18424 жыл бұрын
I cringed everytime that bit slips in the screws
@stossbloszka14144 жыл бұрын
Indeed, not much care and precision here, all work done in a hurry, is the passion gone?
@NickShabazz4 жыл бұрын
This was filmed during a tough time for me. Don't worry :)
@IamTheInsideOutsider4 жыл бұрын
@@NickShabazz I hope the tough time didn't last long.
@SpyderTime4 жыл бұрын
@David Spyderco Tenacious family of knives had soft screws 10 years ago and they are still soft even though the prices have gone up. Also the lightweight designation, why bother it`s only half an ounce lighter.
@victorcurtis64003 жыл бұрын
I wish he’d let us know what he thought of the centering.
@maxsokolov7863 Жыл бұрын
Hey Nick, thanks for the video! Could you please tell what torx size needed to disassemble Tenacious lightweight?
@michaelafton9916Ай бұрын
6 and 9
@bayleyanderson98484 жыл бұрын
So can you put aftermarket tenacious scales on a lightweight then? Normally you cant put regular scales on a lightweight such as the para 3 but with the scales being the same does anyone know?
@mrsw9164 жыл бұрын
The liners do look similar to regular Tenacious liners, but I think you'd have to just give it a shot to know. It does not work on the Para3 LW due to the fact that there is actually only one liner, unlike the original Para3 which has two liners
@edcgearpocketknife4 жыл бұрын
Usually spyderco uses a hole bottle of lock tight on there screws I’m surprised it came apart that easy. But that is strange you had trouble with the centering.
@redneckmetalhead19313 жыл бұрын
Gonna have to do this to mine tonight. Hit the pavement at work and skidded across the sidewalk, now it's nowhere near centered, and the action makes is really difficult and annoying to open, because of it
@oscarrodriguez21692 жыл бұрын
Were did you get the tools ?
@diribastabasta3 жыл бұрын
How oftwn should we do this?
@chfa34 жыл бұрын
🤘
@calebcluff99042 жыл бұрын
I have the same knife but they only gave me 3 washers. Really confused, and sad cause now i cant find a single video showing me how to put it back.
@fitdadexperiment-3eight7973 жыл бұрын
Got a tenacious (my first spyderco) with the lightweight scales. Hated them. Took them off and put on some Micarta scales. Reassembled the knife as it came apart but it is nothing near as smooth as it was when I first got it. More than likely operator error but still very disappointed.
@bernielomax47025 ай бұрын
Is this mayor quimby taking apart a knife?
@Chaosgoat3 жыл бұрын
Mine came tight as hell straight from the box. Weird.
@flytdigforhelvede39614 жыл бұрын
What screwdriver is that?
@bback743 жыл бұрын
Not sure if you got your answer but it looks like screwdrivers from www.ifixit.com/ Have a few products from them myselves - not used on knives (for now) though.
@flytdigforhelvede39613 жыл бұрын
@@bback74 i already found and bought one. Thanks though.
@liamroarke79914 жыл бұрын
So this is basically identical to the regular Tenacious, except with FRN scales. Misleading much??
@VanessaDaiana232 жыл бұрын
Si algo funciona no lo arregles.
@RbgHebrew14 жыл бұрын
Simply close the blade and back the pivot out till almost free then tighten back to normal then loosen with micro turns to center that blade. And Stop using so much lock tight. The more you use the tolerance on tension get thrown way off
@incognitusmaximus21185 ай бұрын
What is the purpose for the second hole above the pivot ? Any idea ?
@wake7773 жыл бұрын
Based nick shabazz?
@olzhaskaupbay79034 жыл бұрын
no first impressions? Dansgame !
@NickShabazz4 жыл бұрын
Robert Ryan full review airs shortly :)
@Satanthony4 жыл бұрын
a lot of people attempt to take apart a knife, do it wrong, then order a knife from amazon and replace it. You make disassembly look too east. I blame The Nick.
@gitarthakalita14 жыл бұрын
♥️🔪
@centurionmcjk43914 жыл бұрын
lightweight spyderco persistence? Lol
@poisonousnut4 жыл бұрын
i hate my Tenacious LW. sent it back to Spyderco to try and get the action and centering fixed. they said they couldn’t do anything since i opened it up. so it still has TERRIBLE centering and a TERRIBLE action. i love my Para 3 but i’m done with cheap spyderco’s. they obviously don’t put the same effort into their budget knives
@taddy_mason2054 жыл бұрын
bud they took the regular tenacious and put different scales on it and decided that was an upgrade. LOL
@CNYKnifeNerd4 жыл бұрын
Soumds like you damaged the washers. Perfectly reasonable for them to not help you, since the damage was caused by disassembly. Theyve never refused a warranty issue for me, and i always tell them ive opened the knife. Then again, i can reassemble a knife without breaking anything, and dont blame manufacturers for my mistakes. You should have just emailed them and asked for new washers. As long as youre patient, and not a dick, they send them out with no charge.
@poisonousnut4 жыл бұрын
Eyedea315 ok...so the knife arrived to me from Blade HQ with the blade nearly touching the liner. the blade also required two hands to open due to the pivot action. i’ve been taking apart and reassembling knives for a few years now. your assumption that damage was caused by disassembly is incorrect. it arrived in this condition. if you watch all of this video you’ll notice he had similar issues with the centering. one question for you Eyedea...how many quality knives do you own that require 4 washers?
@smalls034 жыл бұрын
@@poisonousnut try sending it back to Bladehq
@Baaddu4 жыл бұрын
You think tip up carry is the only way because you have never sliced your finger open on a partially opened blade....
@rcjoe4062 ай бұрын
Its almost like they designed it to be off centered just to make you buy the real deal very sad for 60 bucks
@williamzwuck15624 жыл бұрын
Nick we're there cracks near the lock bar. Even if they were imperfections in the metal it could lead to cracks and lock breaking. Why didn't you mention this during video. Spyder expects a premium price........off center blade,problems near frame lock. Can't say I'm impressed with Spyderco or you with this video.
@hohanrodanrodan96244 жыл бұрын
Looked like scratches to me. Maybe why he didn’t think much of it.