NIGHTMARE VAN FLOOR INSTALL | It All Went Wrong - No Experience Van Build

[@WillsWhereabouts]

Safe to say the flooring was a ball ache but thankfully a managed to get it done and I’m relatively happy with how it came out. Lots of lessons where learnt along the way hah. This isn’t my finished floor but just the foundation to build from, further down the line I’ll put some vinyl down to give a nice finish. Let me know what type of videos you want to see me create along side these and thanks for your continued support! 😄

[@josephbayford8310]

Came out looking great in the end, and don't forget at this stage most of your works getting covered up and you'll never see it. Don't doubt you're doing a fine job, keep it up

[@Ellie-we5rq]

Looking good Will. Our van has a Lino on top of the ply. It’s thin and also helps with the sound. Easy to sweep too.

[@THEBESTGTACONTENT]

I'm enjoying these van builds more than the stealth camping at the moment good job ⛺👌

[@IMP3TIGO]

Floor looks great overall. Really interesting way you determined the shape using that contraption you made. Still not sure how it works. Only negative is that you won't be able to stand up fully inside the van.

[@Slikx666]

When we make mistakes we can look at them and feel like crap, or we can learn how to cover them up. If you were to see the mistakes made by the prop builders in the film industry and the way they hide them you would be amazed. But you're learning and there will be mistakes, the next van will be better. 👍😃

[@msives]

I love the fact you make mistakes and leave it in the video. Compelling authentic and totally genuine. Well done sir.

[@WillsWhereabouts]

Thanks Matthew

[@NicholasCali]

Agreed this makes him very unique from others, i also made almost all these mistakes myself and it is interesting to see someone else make the same mistakes! Overwhelming project but keep up the good work mate!

[@mitchellcampion3880]

My van has so many imperfections, but i built it with my own hands. Nobody can take that away from you! Its your creation!

[@leoh.7160]

Cardboard is much easier to use as a stencil. Trace your outline onto the cardboard then transfer it to the wood. Then cut.

[@chox2001]

There must have been hundreds of us shouting this at the screen. The only thing I would have done other would be to keep factory edges wher the boards meet. He will know for future I’m sure.

[@xtrax38]

@@chox2001 I was one of the thousands shouting use card board 🤣

[@ledicarusmedia]

@@chox2001 LOL yes, as soon as he started marking the wood I was cringing "Nooooo use cardboard!!!"

[@WillsWhereabouts]

Hah I after reading the comments I can now see that cardboard would have been a better way to go. You live and you learn I suppose!

[@ledicarusmedia]

@@WillsWhereabouts Yup, some people get to make the mistakes so the rest of us don't ;)

[@toddcouchman4344]

I generally don’t watch build videos but I have thoroughly loved watching yours. Your honesty and ability to laugh, and cry, at yourself is awesome. I have laughed, and cried, along with you. Thank you for your channel and your wonderfully honest approach.

[@WillsWhereabouts]

Hahaha thanks for crying and laughing with my Todd I appreciate it!

[@roliquerobeeck2979]

On the side door part, that is a bit screwed up, I would use an aluminium profile to cover it up. It also can work as an reinforcemend👍

[@396771919]

Was thinking the same myself when I seen it

[@alanearle2353]

I was gonna say exactly the same thing too 😉

[@WillsWhereabouts]

Thats what I plan to do to cover it up

[@peskyparttimers8239]

@@WillsWhereabouts Have a look at Aalco or Commercial Body Fittings, they do various different profiles for finishing floor edges. Will neaten it up and stop it going all splintery. If you need a long straight cut across a panel, clamp a piece of steel or ally angle to the panel to run the saw up against. Those clamp on saw fence things aren't a great success, buggers for coming loose....

[@bbmchotmailcom]

Could he have flipped the wood? couldn't see if it was symmetrical or not.

[@iwanwilliams4526]

Mate, your efforts are heroic. You should pitch your efforts to a production company for a series on BBC3 or BBC4. Your personality shines through, and your approach to mistakes is inspirational. Thoroughly enjoying your videos . Thanks, pal!

[@BobsYaUncle-z2h]

Just hide your mis-cut with some edging, you'll need some anyway to make it look flush.

[@WillsWhereabouts]

Yep thats the plan

[@theworth123]

I've been a builder most of my life. Started as an apprentice ship's carpenter 1969. And fitting out a van with all those curves and notches is a nighmare for the best of us... Yet for many people '''oh. carpentry is easy'' well it is when you're watching a pro, but doing it is a different story... Like watching your learning curve, you're doing well!!!

[@396771919]

I'm a chippy myself and it's deffo hard to do when u never did it before but your getting there. Forget about the guide in the skill saw and use a straight edge and clampit or screw down. But it's great entertainment

[@WillsWhereabouts]

Thanks Sean lessons are being learnt every day hah and thanks for the tip on the guide I'll scrap it next time

[@Chobz96]

As for finished flooring i would suggest: Palio core (thicker) or Palio click (thinner) panels as they are used in bathrooms so i believe in van would be great as it be better if you get any water in on a rainy day or something.

[@rdwilander]

brother Will, new subscriber here. I feel your pain. As an experienced DIYer ( I actually built my own home), your reactions as things go sideways mirror my reactions exactly, including the frustration swearing and the thank you Jesus relief prayer. Don't be too hard on yourself and remember "You are building a van-not a grand piano"....it helped with my OCD moments

[@rasyidyazid]

Cant stop watching this. The commentary on the video and about the mistakes are just bingeful to watch.

[@RustyRoseAdventures]

Nice work will! Defo glue it down as all the kitchen and bed will hold it down. Saves you drilling through the lovely floor of yours!

[@joethomas7585]

Its okay mate. It does not need to be perfect! You won't see any of those gaps. You've done great! Don't let a little ocd annoy you. Done is the new perfect 👍🏻

[@ivorwelch8446]

As a chippy, small gaps will not matter as you will have a floor covering of some sort so don't beat yourself up over some small gaps between boards , you get to know what tolerances you can "get away with " dependant on the actual job you are doing, with certain things a mm or two gap does not matter, however if , for instance, chopping in a hinge on a nice oak door then you really do have to be spot on., really enjoying your videos

[@fairysrreal180]

Will make videos of you buying the materials for the van to caravan. Can't wait for your next upload mate.

[@ChrisTheButcher]

You know what buddy your doing a great job considering you've never done it before😉

[@WillsWhereabouts]

Cheers Chris, I'm getting there

[@hawkkim1974]

it's all right as long as it doesn't fall apart. Perfection is just an unicorn.

[@catherineferguson7388]

Bless you Will, your getting there, I stuck my thermal sound proofing on my wood and then put a thick carpet on top of that, my flooring is so warm. I do enjoy your van building videos, it gives me some ideas, we learn by our mistakes, keep going Will. Your next stage is near. Take care xxx, can’t wait until next week. 🚐🚐🤟🏼✌️💕🇬🇧

[@jasmine-oliviarose1908]

That's a flippin great idea, fanks Catherine 👌🏽

[@martinalloway6980]

I’ve learnt that my biggest problem is me. I need to get every job sorted, with the right tools, space, time and fore-thought. Otherwise I get distracted by something and fuck it up. You’re doing great mate. Just realise you won’t win them all so the wins are more the sweeter.

[@leahsweetland6480]

I’m less worried about the safety glasses now and more worried about you cutting off a finger. But your hard work is paying off! It looks great!

[@cate4016]

I enjoy your series so much because it's so real. Love seeing the highs and lows.

[@pennyarts886]

So smart of you to create so call "mechanic pencil". 👏👏👏👍Love your video ❤️❤️❤️

[@diwarburton5369]

I’m very impressed with your perseverence and patience, you are showing it as it really is. Well done so far.

[@R93-e5n]

“Tight as a nuns you know what” You must be pleased that flooring is done 👏🏽 The van is coming along very nicely

[@zianeshkasparen4358]

Thigh as a nuns what? I do nooot have a clue. 🤔 🤣🤣🤣🤣🤣🤣🤣🤣

[@WillsWhereabouts]

haha I'm glad I managed to get that job done

[@R93-e5n]

@@WillsWhereabouts hats off to you bro you’re doing yourself proud! Can’t wait to see the rest of development & the adventures you got planned for future 👊🏽

[@bigbenskeys]

I'm in the middle of a self build as well and can totally relate to your struggles. Thanks for your brute honesty in your videos... certainly cheered me up, laughter is good for the soul 🤣

[@tommythomson3050]

Good to see you have a good quality drill and bits now

[@goldiebear4050]

Good to see you Will. You're moving forward making progress.

[@WillsWhereabouts]

Slow but steady

[@vertron]

Looking forward to the stealth camp videos in the van!

[@WillsWhereabouts]

Coming soon!

[@steveantrobus1825]

Hi mate, I’m a joiner, and you did a cracking job on the floor. Well done mate 👍🏼

[@jake580]

As another week of work approaches and the kids are in bed, I look forward to the van build videos as an escape for a while. Will, I'm sure the most of us have made mistakes as non professionals. I know I have. Showing you're not perfect give a true insight to van builds, not the rose coloured glasses view some channels have. Keep it going matey.

[@hugokeys602]

A resounding "YES" to your question! We are indeed enjoying the van build videos!!! Keep up the GREAT work!

[@WillsWhereabouts]

Thanks very much Simon

[@tooyoungtobeold8756]

Excellent and amusing (to me) video. Trim the piece you cocked up with either right angle aluminium or wooden strip. Looks neat and hides the mess. My workmate has loads of saw cut in it. It adds character.

[@footballpicks1851]

Great videos and great channel mate. It’s so nice to see someone converting a van who isn’t a pro at woodwork and conversions and is learning on the go it makes it feel so much more relatable and achievable

[@sandraolano3555]

Hi Will...youre doing great, patience is a virtue and never give up, you can do it and youre gonna finish your van conversion with success...keepsafe

[@WillsWhereabouts]

That's the plan!

[@tomblatch1594]

Great job Will! Don't sweat the finer detail - you're not a pro and filler is your friend. No doubt the end result will be excellent!

[@zianeshkasparen4358]

I ❤LOOOOVEEEE❤ the van built. It is a part of your next leg of stealth camping vids. The Preeee-Lude of what is to come.

[@biking-northwest]

Top tip to fill the gaps in the wood, mix sawdust with pva glue until its a thick paste and fill the gaps.

[@16vKarlos]

Will, the bit that you’re unhappy with on the sliding door, cut out the first 6 to 12 inches and fill it with an offcut. This way, it’ll have a nice edge and the bit that you’ll see mostly will have a straight edge, plus it’ll still be strong 👍🏼

[@vetworker]

Mate I think you’ve done a cracking job. All this hard work will be worth it. 👍👍👍

[@amystravels]

I am massively enjoying this series as someone who is keen to do their own van conversion with no experience! Thank you ☺️

[@Melmc1403]

You did great for someone who doesn't work with wood. Good on ya! Loving watching these videos x

[@markcash3852]

These videos are fuckin quality just really genuine. I only found your page yesterday and stayed up till past 6 just watching them quality videos

[@joeclow6563]

Just come across this video and your mistakes are brilliant, I love the fact that it happens to everyone. Cutting through the table was pricless

[@ppetercorbett]

Thanks for sharing all of this. Some of us are learning more from the mistakes than anything else! Keep up the great work!

[@martinlindholm3125]

Dont be so hard on yourself mate, it's a learning process and you are doing great! I'm convinced the end result is going to be great. Thank's for the entertainment, cheers!

[@IRVisionPrints]

It’s definitely worth sound deadening the floor, you made a wise choice

[@glennloof8296]

Tjis is the best series i have ever seen. Hats of for you 🤘🤘🤘🤘 Great love from Sweden

[@xmoreghostx]

I think it went pretty good seeing that you were winging it the hole time

[@multipreach2674]

Doing a good job lad, attention to detail you won't go wrong.

[@kinross24]

Well done. Could save an eye but your also setting a good example to others

[@Life_In_The_Old_Goat]

Im crying watching this as you making it sooooo entertaining 😂. Just about to embark on my own conversion and these videos are so helpful. Thank you for sharing your experience in a truly unique way!!! 😀

[@flyingmalkie4346]

For scribing, but material upto the shape, in the orientation it will put in, like is done in video. Use measuring tape and measure at the widest/furthest wood to shape distance, leaving few mill for pencil to scribe just at the very edge, where the widest measure is, lock the tape, with pencil in corner of tape and the body, then keeping the tape measure facing the same direction, start at edge and let the tape lightly run along while scribing on wood. In case of above video, it wuld scribe the two corner areas far into the wood, and the middle wider portion will be very close and on the edge of the ply I know this is simple but i like mansplainin

[@bogdanbaciu5381]

We want to see even MORE van build! Can't wait to see what the end product will look like - love your channel and Forest Forest's. 🤜🏻🤛🏻

[@WillsWhereabouts]

More to come!

[@h.bsfaithfulservant4136]

Well done Will 👍. I would like to see you take a short holiday in the van asap just to have a break from the build. You have earned a breather already 👌😀

[@WillsWhereabouts]

Haha this is the plan very soon!

[@mcimon91]

Woohoo!!! That darn floor is down! Can't wait to see what's next!👍👍👍

[@algonsalves8932]

Great job on the floor don't beat yourself up with the small stuff ! Your doing great ! From USA

[@JULIA-vm4rb]

I think it looks wonderful!!!! You should be very proud of your self

[@hughjampton1561]

Outstanding mistake maker, i dont feel so bad about my non existant skills anymore. Well done for completing it with more patience than I have.

[@busbuilduk1397]

Mate dont worry about little gaps and things not being quite right when you put all your trims and edging on it will look great

[@campervanchris4171]

LOOOOOOKS GREAT !!!!! dont be hard on yourself its looking fantastic !!!!!! loving this as i'm going to do my own van !!!!!!

[@dannywhitaker7091]

Good effort man! It does look good, steady progress. I hope you stick at it!

[@abou824]

Good to see that you're doing ok and staying motivated Will! Love watching your videos so much

[@WillsWhereabouts]

Thanks mate appreciate it

[@jenny.barter]

Looks great buddy,been really enjoying watching the progress you’ve made,can’t wait till it’s all finished

[@chriswilliams9832]

You should have just called the small gap between the boards an expansion gap 🤣🤣

[@knightmayre]

Mate, this is a great journey from a viewers perspective. Especially as you're learning as you do it as most of us would. Great content bud

[@bfgsteve6146]

Still proud of you, keep it going, doesn't matter how long it takes you!

[@WillsWhereabouts]

Thanks Steve

[@21stcenturycaveman33]

This was a brilliant vid, Very informative and entertaining and honest. Well done Will. You're a very inspirational chap. You deserve every one of your subscribers and all of the praise from your viewers. Well done mate. I'm following this series with interest as I will be doing my own conversion and YT uploads early next year n my own channel. Take care, Respect, Des.

[@mphigham1963]

Aw Will, I`ve not been up long and I`ve been sat here watching this video pissing myself with laughter. Roll on the next one Pal !

[@TravelTrollsTV]

Proud of you buddy. Great job!

[@tacticaladvance]

I have built a van myself to a very high standard. You do not need to go this far with sound deading. Wall yes, the floor no, once you place the floor down and insulation it acts as the deading. I 100% LOVE your videos please no hate. I went over kill as well with my build and I no know it was to far lol. If you want to see a high-tech van build to a hole another level PM me, I went over kill lol. I would also be happy to help out.

[@beckwithwoohoo]

Far more useful to see mistakes being made. I'm a week into my first project gathering information still and this has been a great insight into the pitfalls of the process. Cheers dude !

[@stevedines2636]

Well done Will keep @ it, just think about the ‘End Game’ 😎

[@GG-jq9hb]

That little EasterEgg in the Squarespace ad haha 🐕

[@carlingcuz]

Love your honesty as you could easily have edited some of the mistakes out. All this hard work just means you'll enjoy it more when its done !!

[@WillsWhereabouts]

I think so too

[@dannib69]

Use a edging bit to cover it and help protect the wood getting in and out the van

[@alcoholiday6954]

Good video Will, I like the way you show everything, warts and all. If I ever get round to doing a van build I would definitely use your videos as a template. 👌👍

[@WillsWhereabouts]

Thanks 👍

[@brianjoseph3818]

Another good video look forward to your next way love the way your a genuine guy keep up the great work

[@danimalthemanimal5124]

Sometimes, conjoining factory edges is not possible, or at least problematic or wasteful. TIP: Contour the wall edges as needed, and use a square to keep your genius homemade scribe exactly perpendicular while it follows the contour of the wall. Once the first wall is scribed and cut to fit, scribe and cut the opposing wall, BUT allow the two floor pieces to overlap down the center line, or middle line. Once the opposing wall's piece is cut, and the two flooring pieces are overlapping down the middle, SHIM UP the floor board CLOSEST to the metal floor with a long strip of scrap of uniform thickness, and the top piece will rise, too, as you lift the board under it. Mark the upper piece with a straight edge or chalk line, where you want the seam to be, then set your saw "cut depth" such that it will cut through both flooring pieces, but not your metal floor, of course. When the cut is finished, and you pull out the shim and leftovers, both flooring pieces will smash together snugly and perfectly, no matter how wiggly your final cut was.

[@nicholashardy8735]

Use building paper to trace a template. Its what we use in bathrooms for fitting vinyl

[@jonno8o726]

Not a big deal you can cover that up with a piece of angled metal then it'll protect the edge too, it's looking great so far though so keep up the good work mate 👍

[@roberts546]

Love it,not many people would be as honest as you and your cutting skills, 🤡😁👍👍

[@markstevenmark]

Great video, loving the content, looking forward to the next one. So gr8 that you are keeping it real.👍💗👍

[@waynemcintosh3025]

Stay with it! You are doing a fab job. Think of the benefits at the end👍

[@frankintx699]

You are doing great on this Van as a DIY project!

[@WillsWhereabouts]

Thank you!

[@vyper8984]

Will I am loving your content, I too get frustrated with myself if I mess something up but always think to myself that I’m only human none of us are perfect but I love the way you say to yourself “fk it I’m carrying on” I can understand how the gap in the back floor panels may bother you but your bed will be covering them up mostly and you could always get either storage for under the bed or a rug so you won’t see them once the build is finished, I have to say your doing a great job better than I could do that’s for sure 😁

[@garyc1913]

The floor looks great mate. Worth the stress, I was expecting to see you cut through one of the batteries you was using 🤣

[@WillsWhereabouts]

Hahaha thankfully not

[@sharkamov]

Re. your sawing & joining; _never_ loose sight of the fact that _no one_ manages to make an omelet without cracking an egg or more! . . . 👌

[@VelvetElvis8]

Keep up the good work Will! love the van build series!

[@FieldviewAdventures]

Brilliant!!!! Love watching you will keep up the content and your doing a great job on the van

[@purajitbiswas635]

You're very hardworking man keep it bro💪💪💪

[@fpoiana]

Will, these episodes are a joy to watch! Keep them coming!! Cheers from Argentina. Fede

[@davegoodridge8352]

Honestly you’re doing a great job!!

[@oscaryjavita]

It's looking awesome, Will. Good job 💪🏼

[@markbarlow4918]

Searching "dogging" on squarespace!!! Classic humour!

[@Deanrwp]

Hi Will, I think yips are doing a Great job 👍 on your Van build, Yes things will Not always go according to plan, but your doing all of this as you go along! Once this is all finished you can look back at all of what you have achieved! I am loving all of your videos 😊

[@WillsWhereabouts]

Thanks very much Dean

[@cbolt4492]

Fair play to you, I've made all those mistakes and probably will make them again 😎

[@englishkernigit8294]

".. cross your bollocks.." 😅😅 Nice! Well done though matey. You seem a hell of a lot happier

[@WillsWhereabouts]

I'm getting there, always ups and downs

[@stebishopnomad1838]

Use a compass like you used at school with a pencil in the end to scribe will never fails