Nine-Layer Compass Rose Art - LASER CUT

[@daviddeking2676]

Really beautiful project! The color combination is great, a perfect fit for a nautical theme. Thanks for sharing!

[@poppystevenson134]

Beautiful piece of work!.

[@marekgodzisz5937]

Fanstastic job and project! Thank you very much!😉

[@DawnDBoyerPhD]

Gorgeous!!

[@usergoogle]

Good job 👍

[@MakingLemonadeCreations]

This is BEAUTIFUL! I love the color choices. Wish my OMTech would cut through that consistently! Great job on the frame too!

[@bumpythebronco3635]

Turned out great! the colors are really nice.

[@bradbrown2168]

Use have an impressive wood shop!

[@brynroberts9570]

Outstanding 😮

[@drbelt87]

Great work. Keep it up.

[@jayclinton1811]

Your work and presentations are great. Continued success to you.

[@kmchartrand99]

Great video sir! I'm just getting into laser cutting myself, and I would love to see more videos like this with how you tackle paint instead of stain. Keep rocking out the vids!

[@barzalou]

Keep going... That was very good!

[@quesiluu]

Great job!!! Can you please provide a link to the masking tape you are using? Thank you very much!!!

[@donaldtimmons7675]

Well done Sir, thank you for sharing!

[@dasg5805]

Great project! This came out amazing

[@DawnDBoyerPhD]

Beautiful

[@thehamlinwoodshop]

Fanstastic job on this video and project! Thank you very much!

[@chuckbrower1348]

Beautiful! Where can I find that file, I would love to try it.

[@cathymyers7831]

Beautiful piece of art.

[@umlooad]

Great outcome, very nice

[@JasonPeltier]

Very nice! That's a lot of work to put together.

[@billermiller11]

Epic work.

[@tvou37]

this is so cool! great work.

[@antitheist9976]

Amazing build mate, well done indeed 🙂

[@greatcakiness1230]

This is absolutely beautiful!

[@hmanohar7634]

wonderful

[@AllThingsJUDYTV]

That is beautiful.

[@scottmurphys]

Since KZbin got rid of PMs, I will try this and hope you are still keeping an eye on things. First, great video, I really enjoyed watching. Second, it seems that the link for the design is no longer valid. I am getting my first laser this week and would really like to try this design once I have kicked the tires a bit. If you see this can you reply with a new link? Thanks for the content! ~Scott

[@LivingFrugalAndPrepping]

That's very cool I love it.

[@rodrigorsg6916]

crazy!! 💥💥👏

[@Shakalowski]

How much material you spent to make it?It is awesome!!

[@gilbertpfaffsr1822]

Rustoleum 2X spray paint is the bomb.

[@EmmeBiFabLab]

Ciao, che tipo di carta hai usato per coprire i pannelli? PS. Bellissimo risultato!

[@owenjohnson5030]

Very nice. Can you share where you purchased the full sheet of 3mm plywood?

[@GETTR2024]

Awesome!

[@toddlacher89]

If you use a “stain wood conditioner” the second coat of stain will not dry as fast and will be easier to work with. It will stain more evenly.

[@gilbertboyer9936]

Great project, well done. A few questions. Why did you choose to paint it prior to cutting the work and was the masking done to protect against laser burn?

[@davycrochet9569]

Your work is awesome. I am new to this and, I have been looking for a layered compass rose file for a long time but, other than the one you built I have not found one I like. Sadly the file is not available.

[@thejwoglesby]

Nice! Curious as to where to get the birch plywood at a "reasonable " cost?

[@rbwoodcreations1039]

I trailer large loads of it back from north Carolina

[@myhoneyshandmade1077]

Nice project. How do you like the Nova 51/130? Mine shows up in the next 2 weeks

[@fredwienbarg5051]

Really nice! Tried to find the pattern on Etsy but no longer there.

[@WooderBoyProductions]

What are the sheets that are painted behind you in the bins?

[@Atr42Greasemonkey]

Would love to purchase

[@RennoFun]

Love it!

[@margaretfricke3629]

one of my favorite designs is the compass rose, and other most favorite thing is in layered design! Sadly, this doesn't show me how to make it. I was hoping to learn. And the ETSy sight you referred to is no longer there. So please help, I really want to go forward in accomplishing this!!!! Thank you

[@705richard]

Why did you apply tape before your cut

[@craignichols4634]

It keeps the laser from leaving black scorch marks. It’s a clean cut.

[@edwardsola4564]

Great video! Just purchased my first laser for my Longmill CNC machine. Excited to start learning and using it. One question on your staining technique. Why wipe it off? I use that same stain in semi transparent and never wipe it off. I apply with a rag and it looks great. Just a thought. Keep up the great work!

[@kimsaarunga989]

Good job.Where did you get the design for laser cutting of this compass? Much love from Nairobi Kenya

[@mitchellahlswede9384]

What masking do you use?

[@leewriter4656]

So you bought the design.

[@jimmyfavereau]

bEautiful RB

[@allanbourner4569]

The link for the files says you are not selling on Etsy!?

[@ra23works]

HI!!! Nice job on this project!!! I was wondering what is the Brand Nmae and Model of your laser? More power on your channel!!!

[@testingperson8413]

Is there a reason to NOT cut prepainted wood? The labor might be saved.

[@chaimaeelmanssouri1145]

That's amazing Great work can you please tell me that name of paper that you used to cover the wood after painted it ?

[@MrFredsterforever]

That shop isn't selling anymore. Know where I can find the file? My sister wants me to make her one.

[@piotrd9019]

What the model cnc you used ?

[@patricebastien3232]

Hi, I’m a 61 your old plumber who wants to retire but don’t want to stay at home doing nothing, so I was planning on starting a business with a laser and a CNC. What would you suggest on how to get selling or getting clients?

[@blakelandis2434]

Dang MaWoodshop is no longer on etsy. Any other way of getting this SVG?

[@gurudataa1865]

Great job..I am now getting to laser cutting...you.mentioned masking after painting the wooden ply pieces..does this prevent the scorching of the ply wood a d when the masking is peeled ..the paint comes off? ..what type of masking do you use?

[@rbwoodcreations1039]

Works like a champ... paint/stains stays with no scorch marks after peeling off the masking. I use the paper transfer tape rolls and they can be found on Amazon in 12" wide and 24" wide rolls.

[@souleymanesidibe9487]

Hi! This is à great job. I would like to know how the design is done on computer. Thanks.

[@franciscobaez1528]

I has been try to find 1/8 plywood that big .where you get It?

[@williamhbynumiii5269]

What laser do you have? I have a xtool d1 pro 20w. And how do you design your art? I’m interested in creating and not just grab files from Etsy.

[@forchettinastaff2626]

For sure I missed a lot on such kind of laser cutting experience, but why did you mask the plywood? And why you didn't spray color later after the cut? Just for knowledge.

[@jonsaircond8520]

Masking protects the finish from any burn marks. Finishing the wood first makes it a lot cleaner looking. There are so many edges no way to sain or paint afterwards and not look like junk. I spray my edges with flat black before I take the transfer tape off. Basically its a mess to color after its cut

[@kartikn_003]

Hii sir I wanted information. Which primer and color fits on MDF wood. What color are you giving?

[@captainron8221]

Where do I purchase the designs. Link is not valid

[@HimesMagic]

Damn it! I want those files but the link you have shows that seller isn’t selling anymore. Do you have contact info for them?

[@rbwoodcreations1039]

They sell them on a different website now. Google MaWoodshop

[@HimesMagic]

@@rbwoodcreations1039 funnily enough, I literally just bought the bundle from them from another site. Lol

[@joeljr.5286]

Never seen navigation or a compass being made like this before.

[@Z-add]

I'm worried about water condensation behind the glass making the glass foggy.

[@stegmeierj]

Hey brother the link for the files aren’t working, want to share the file?

[@bbasmdc]

This looks absolutely gorgeous - congratulations on a fabulous job. I love the way the final piece "pops" with the contrast between layers. Did you just go by gut feel, or did you have any rule of thumb for selecting layer colours? Thank you for a great tutorial.

[@jbouza09]

Looks real good !! What program are you using ??

[@unlimitedj06]

👏👏👏👏👏👏👍👍👍👍

[@MegaEmilius]

noooo...the file it s no more available on etsy....sigh sigh

[@martinduffy3835]

Do you have a link to the file?

[@blakeeldridge2466]

Where did you get the plans for that?

[@blakeeldridge2466]

8 months later I own my own laser and have made many of these beautiful projects!

[@xLucy_Hx]

Would you make a wall clock in a similar style?

[@rbwoodcreations1039]

I would think so... I'll be doing a mandala style layered clock soon.

[@TetraCNC]

I don't like the fact that I don't have that T-Shirt. The video - Great

[@BobBob-eh5sb]

Looks great. I really like the layered design. It gives great depth to the piece. Curious about the masking material. Is that a really wide roll of masking tape, or vinyl?

[@rbwoodcreations1039]

It's paper-type transfer tape for transferring graphics... works great for masking large areas.

[@BobBob-eh5sb]

@@rbwoodcreations1039 Ah, ok thanks. I’ll check out. And again, the Compass Rose looks awesome. I’d be tempted to keep it. You put a lot of work into it.

[@LionTree]

How do you price this?

[@dpeterson45]

Files no longer available :(

[@iwannaapple7190]

Is it possible to do that with the cnc by using a small bit?

[@rbwoodcreations1039]

Possibly, there would just be a small radius on the inside angles

[@LawrenceRinconLoRinKo]

How big is that piece

[@rbwoodcreations1039]

22" x 22"

[@nasochekokura]

which laser are you using?

[@rbwoodcreations1039]

Thunder laser Nova 51, 130w

[@bjgraph3215]

Hi i need to know tue machine details

[@patriot9560]

That masking material looks like Pallet tape from the screen printing industry.

[@glasgowjohn7831]

do you know of any other shop that sells such designs as mawoodshop is no longer trading

[@rbwoodcreations1039]

They're on designbundles.net now. Guess they left etsy.

[@glasgowjohn7831]

@@rbwoodcreations1039 cheers

[@punkeasy]

Ever hear of stereo?

[@jamest.5001]

Do you think it would be possible to make something similar, as a tile, for flooring or backsplash, from carved oak or ceder , by asking the moisture out of it, then use vacuum and pressure to get epoxy to soak into the wood, maybe paint the different layers with colored epoxy,. Then coat in a heavy layer of clear ? I do not know that much about epoxy, or wood carving, I ave see ppl make wood for knife handles and such, with an infusion of epoxy to preserve the wood, and seen epoxy tables and floors, and ppl making their own flooring from ply,. So maybe do a vacuum infusion, similar to carbon fiber and fiberglass, it could turn out to be nice or it could end in a big expensive MESS! Probably carve and fill with epoxy would be a safer bet.. I don't really care for the really crazy epoxy countertops, I like the more like ingle color stone looking floor and counters tops,. With accent pieces.. nice work, it's a great time to be a maker!

[@Ninjadave18]

I would have gone with a dark frame. Too much white.

[@joseperes777]

AWhy don't you cut each piece without paint and without masking.....and paint them later with spray paint?....and glue them later....to me this way is easier and faster

[@jondoe5866]

It looks nice at the end. but the instructions was not. Now you have figured it out. Delete this video and make a new one. We deserve the best. Please don't sell yourself short dont make poor habits like this. Dive back into and learn how to design the art. Be better. KZbin has went to crap after the ad change.

[@Laser_decors]

Bro you are using which software??

[@Laser_decors]

What's the dimension of ur laser cutting machine?

[@Laser_decors]

Kindly upload tutorial on working on software