You were supposed to lift the black tabs on the orange and yellow connectors. They are locking tabs. They don't melt when the airbag deploys
@cmhgarage50984 жыл бұрын
Need reset the airbag module or only eraser code with scanner?
@xSUPERoMANx4 жыл бұрын
these types of steering locks create a lot of people stuck . thankfully these are straightforward to spot and the revised part is not very overpriced . There is a do it yourself on it over at my channel as well .
@Jude13able Жыл бұрын
Oh my goodness you did this without having the battery disconnected. I noticed this when I saw lights on the display. And you always replace the entire wire when dealing with the airbag. And you didn't show a check to verify that the airbag was working. And you was working in front of the airbag.
@demetrasharris19553 жыл бұрын
Where can I get an Airbag for my 2009 Nissan Altima?
@chinoantrax5714 жыл бұрын
If I change the entire steering wheel while having the battery disconnected will that cause any problems ?
@DULLAHGOSOHARD4 жыл бұрын
No that's how i would recommend you do it
@danieldwyane60236 жыл бұрын
Hey, thanks for the helpful video but i have one question. Did you have to clear the 'Air bag diagnosis sensor unit' in the center console? If so how did you do it. Thanks for your help
@DULLAHGOSOHARD6 жыл бұрын
daniel dwyane I had to replace it because it store the code permanently but there might be some where you can take the computer to get it flash
@danieldwyane60236 жыл бұрын
thanks man
@gpaulwelch71275 жыл бұрын
Dullah Goso hard my airbag dose them check it out
@drwatson12344 жыл бұрын
On my 14 Sentra, I could push on the metal clip but I cannot get the airbag to release. I can feel the clip being squeezed but the airbag won't come out.
@Rawbuterbrod4 жыл бұрын
Same with my 2017 nissan altima. I push both the metal clips but it wont come off
@drwatson12344 жыл бұрын
@@Rawbuterbrod I ended up taking a flathead screwdriver and cutting out an indentation in it to allow me to move the pin in and also to the side and that worked. The trick is not just pushing the pin in but also moving it out and away. I also ended up popping the other side back in and then working on the difficult side. Takes time and patience.
@Rawbuterbrod4 жыл бұрын
@@drwatson1234 I ended up getting those pins off but the actual airbag wont get off for some reason.
@SpaceAtomz Жыл бұрын
@@Rawbuterbrod I had my friend sit in the seat while I pushed both pins in at once, and they pulled. It came out after that. Sometimes the pins just can’t be pushed one at a time
@monsterd56843 жыл бұрын
Thanks for the vid
@edwardgiusti21569 ай бұрын
Thanks!
@Miltown.Tarzan2 жыл бұрын
Is this the same for the 2009 Nissan Altima coupe ?
@lisandrofernandez15036 жыл бұрын
Alright alright!!
@DULLAHGOSOHARD6 жыл бұрын
😂🤣😂
@alialhamdani16214 жыл бұрын
Thanks man it is help a lot
@isaitocrts10 ай бұрын
He has power still on the car 😮? I don’t know about that 😅
@mosdiq8232 жыл бұрын
Thank you
@tonym36592 жыл бұрын
Appreciate it!
@Nolan.Gurule Жыл бұрын
I’ve been at it for two hours no luck
@crecimiento5tagxАй бұрын
You don’t suppose to damage the Airbag Connector. Do is just lift the Black clip & removed.😢😢😢😂😂😂😂
@kahlilsalter78584 жыл бұрын
which wire is for cruise control? should it work no problem when everything is all hooked up?
@DULLAHGOSOHARD4 жыл бұрын
It should work no problem when everything hook up
@SpaceAtomz Жыл бұрын
If you’re only taking the airbag out you shouldn’t even mess with the cruise control at all
@rajaemalcolm18910 ай бұрын
Where did you purchase air bag
@tarsautorepair87665 жыл бұрын
Did you replace airbag sensor by the front end ? Did you unplug battery when you installed new airbag ? Why replace airbag connectors if they didn't melt ? Thanks
@DULLAHGOSOHARD5 жыл бұрын
No i didn't replace the front impact sensors because the computer did say that they were bad, i didn't disconnect the battery but i recommend that you unplug the battery when working on your air bag system, i replace them because the connectors broke
@tarsautorepair87665 жыл бұрын
@@DULLAHGOSOHARD thank you
@carloschabaquel11185 жыл бұрын
@@DULLAHGOSOHARD did you have to replace the module after the airbag and seat belts? thanks
@DULLAHGOSOHARD5 жыл бұрын
@@carloschabaquel1118 some time you have to replace the module after a crash
@igahpoploc5 жыл бұрын
Hi, can you please clear my doubts on upgrading the steering wheel. Can I upgrade the steering wheel of a 2015 Nissan Qashqai (same steering wheel as in the video) into a newer (2017, 2018) Nissan Qashqai flat bottom steering wheel? The new steering wheel comes complete with airbag. Will it be a direct swap? Thanks.
@kakesmungra33783 жыл бұрын
Did you manage to find out?
@SpaceAtomz Жыл бұрын
@@kakesmungra3378 You can, as long as you get the wiring correct.
@Nolan.Gurule Жыл бұрын
Does it got to be on?
@fulgencioduremdes6365 жыл бұрын
asking the same question as boss cadillac
@donaldpimentel86194 жыл бұрын
I don’t understand why you can’t unplug the deploys one and plugged the new or used airbag? Why do you have to cut the wires?
@donaldpimentel86194 жыл бұрын
Got it. It melted 👍🏻
@LillianWargo9 ай бұрын
No not melted. Broken. Lift the black tabs it unlocks them and they pull right off.
@leoedwards95313 жыл бұрын
Fire
@gpaulwelch71275 жыл бұрын
What if the wire colors are not the same color can you just hold plugs up an hook the wires back together
@DULLAHGOSOHARD5 жыл бұрын
The plug can only go in the correct socket
@gpaulwelch71275 жыл бұрын
So if I hold both plugs up an wire the new ones the same its good.
@DULLAHGOSOHARD5 жыл бұрын
@@gpaulwelch7127 yes you should be good as long as you wired it the same way as the old one
@gameruppowallon15726 жыл бұрын
how much it cost?
@rayonwilliamssportsandfun21065 жыл бұрын
🇯🇲🇯🇲🇯🇲 ok bossi .. tell mi one thing yu think a Nissan like that with a burst airbag can be a good car still ? Or the hit will mess up the engine
@DULLAHGOSOHARD5 жыл бұрын
It depends on how hard it get hit
@rayonwilliamssportsandfun21065 жыл бұрын
@@DULLAHGOSOHARD so it can fly wit a minimal hit ? And ntn nu do the engine? Even if the bar at the radiator bend ?
@DULLAHGOSOHARD5 жыл бұрын
@@rayonwilliamssportsandfun2106 yes
@rayonwilliamssportsandfun21065 жыл бұрын
@@DULLAHGOSOHARD can be a good car still ?
@DULLAHGOSOHARD5 жыл бұрын
@@rayonwilliamssportsandfun2106 i really cant tell you that from here boss it depends on how bad it crash
@amirr22162 жыл бұрын
you was wrong bor you break yellow and orange witch you can click black top and remove with out break u r funny wrong 😡😡😡😡😡😡😡
@muayyadkhali12824 жыл бұрын
Hi. how i know the airbag capsule is trigerd please. regards
@DULLAHGOSOHARD4 жыл бұрын
Just by looking at it you will see the bag hanging or missing
@bosscadillac58005 жыл бұрын
Did u ever do the seat belt unlock video and module reset
@MrNate-jd1nc5 жыл бұрын
Thanx
@orangeblueandlavenda5 жыл бұрын
So basically I could just open it up and cut the wires
@antoniostewart93025 жыл бұрын
orangeblueandlavenda no one of them is connected to the horn !!
@zacharypetree5 жыл бұрын
I had this done to my car but they made my wheel crooked. How to I straighten it out?
@DULLAHGOSOHARD5 жыл бұрын
Make sure the wheel straight the take off the steering wheel and set it straight and put it back on
@zacharypetree5 жыл бұрын
How to I set it straight? Is there a bolt?
@DULLAHGOSOHARD5 жыл бұрын
They installed the steering wheel with the wheel turn or they installed the steering wheel without making sure they center it
@DULLAHGOSOHARD5 жыл бұрын
You have to park the car make sure the wheels are straight then remove the steering wheel like in the video and then make sure you place the steeing wheel in the position it would be when the wheels are straight then put it on and tighten the bolts
@zacharypetree5 жыл бұрын
What size bolts
@sfnauto3 жыл бұрын
🔥🔥🔥
@MegzRides4 жыл бұрын
thanks for this informative video. Can you confirm if the steering switch controls of altima and np300 navara are the same fit and wiring?
@DULLAHGOSOHARD4 жыл бұрын
I dont know about that one
@outoftime104 жыл бұрын
What year is that Altima ?
@DULLAHGOSOHARD4 жыл бұрын
If your steering wheel look like that its the same procedure no matter the year
@user-yg1kj7eg4j9 ай бұрын
@@DULLAHGOSOHARD Why couldn't the native wires be used, but had to be cut off and twisted anew?