Nissan J2534 Ecu Programming

[@gruvygraphics9984]

what chord did you use to hook the car up to the laptop?

[@mechanicmatt871]

Thanks for taking the time to walk us through the programming process, I have thought about maybe getting into this some time. This definitely helps. Cheers Matt 👍

[@JLsAutoSolution]

No problem matt, its not easy when you first start programming.. and even nerve racking when you first perform a ecu update.. but alls well thhat ends when.:)

[@tegnoresiente]

Excelente video. Quick question 2020 transmission works on 2013 pathfinder some one told me I can do and programmed and it works but I trying to make sure before buy and switch transmission

[@stanleygrant2871]

Thank you so much for this information, I have a 2015 Nissan urvan nv350, 2.5 turbo diesel. I have a issue where the ecm lost memory of injector codes. I took it to the dealer they put them back in but 2 wks later they are gone again. So I am going to purchase a new ecm but it needs to be programmed. So I am thinking about the program, but thank you so much for tutorials

[@JLsAutoSolution]

Glad it helped

[@nazandjennkhan805]

I'm curious about the "j2534 programming device". In your video, you have a cable with red ends from your laptop. What is the cable you are using? Thanks?

[@JLsAutoSolution]

that is the autel USB B cable

[@smalls7446]

I have a 2010 Infiniti M35X. It looks like most of the vin was erased and the key fob wasn't properly programed. It's doesn't start or crank. I just ordered a new Autel Im508. Any suggestions or guidance will be greatly appreciated.

[@JLsAutoSolution]

make sure you have the proper key for the vehicle, as Nissans are temperamental. also make sure there is no other issues on the vehicle

[@smalls7446]

@@JLsAutoSolution Thanks for your quick response. I actually figured out the issue,the key reader was defective. I replaced it and programmed my keys and it started right up

[@curtisyoung4028]

Awesome video thanks there is not many will go through these steps you have done. Do you have any other reprogramming videos like this?

[@JLsAutoSolution]

thank you

[@danman9017]

cool you got a teaching job also,you will be a good teacher

[@JLsAutoSolution]

thanks Dan, purolator was beginning to look temping also lol, but i only work 30hrs a week with the school then the rest of the time iam off lol🎉😁 thanks for watching.

[@MarioHernandez-bn6pm]

Will the maxi flash VCI that comes with MS909 work with nissan software too

[@JLsAutoSolution]

As long as it's a j2534 yes. But it has limited functionality with the OEM software but ok for the reprogramming software

[@MarioHernandez-bn6pm]

@@JLsAutoSolution thanks. Do you have any videos on how to connect to the j2534 to our laptops. ?

[@francisconevarez8788]

thanks for the video, i do not get the unpack application when i download the file. has the other 3 files that you have in your folder but not the unpack. have you ran into that issue

[@badboy8739]

I have to change my instrument cluster. Can i adjust the mileage on the cluster with this software?

[@saibabupodala6297]

Thank you for sharing your knowledge

[@Sic3r]

So just to confirm does the 1 day sub C-3 + r2r work with the j-box? I have the same j-box from autel

[@JLsAutoSolution]

yes it does

[@ntanovastecnologiasauto2136]

Hi, where I can get the Nissan J2534 ECU Reprogramming Software? I need just make one ECU update.

[@MarioHernandez-bn6pm]

He literally shows you how to do it in the video

[@OQureshii]

Do you know if you can calibrate a distance sensor for a pathfinder with this? Can you erase any trouble codes too?

[@JLsAutoSolution]

this program is only for programming and can not erase dtcs. as for programming distance sensors, which do you mean, The ultrasonic sensors in the bumper?

[@OQureshii]

@@JLsAutoSolution Yea, I went in to a small ditch and that got damaged. So I replaced the sensor but I think the DTC needs to be cleared first. Does that sound right?

[@wasatchm]

do u have to be a licensed mechanic or licensed nissan dealer to purchase these items from nissan? thanks

[@JLsAutoSolution]

No need, just have the proper tools to do the programming

[@loreto220ify]

Is this the same process to program a used transmission replacement on a nissan

[@JLsAutoSolution]

no. there will be resets and relearning

[@loreto220ify]

@JLsAutoSolution thank you do you have any videos on that process ?

[@YahyaAbbasi-m4o]

Can you use the tool to reprogram a pcm?

[@ansautomotiveinc2891]

Hey great video. I wanted to know what is the benefits of using either Ners or consult 3 r2r. over each other? And which would be the preferred choice when doing a reflash. Thank you

[@JLsAutoSolution]

the r2r can only be used with a cardaq mongoose or the cardaq 3 so for basic tcm/pcm programming you need the ners software. thanks for watching

[@chrisingram7277]

Interesting, never really thought reprogramming a car would become a necessity to remove a check engine light. Glad you got the teaching job.

[@JLsAutoSolution]

yah there are time when you get erroneous dtcs that just pop up lol.. it happens quite often on newer vehicles, but you normally don't see it after in dealers after the warranty periods are done. thanks for watching chris.

[@AlbertLantigua-g6k]

I have consult lll plus but how can I conect tmy maxiflash I don't have the J2534 software how can I get it?

[@JLsAutoSolution]

you have to dowbload autel pc swuit that will install al the drivers needed to use with oem software

[@chownzi2461]

Where can I buy the tool

[@NASSTRACINC]

Thank you!, So the Maxiflash pro j2534 will work with the new version? i heard to do programming and live data it will need Nissan Orginal passthrough

[@JLsAutoSolution]

you can get the mongoose for nissan from drew technologies and it will work with the consult 3r2r but to what extent?????? thanks for watching,

[@NASSTRACINC]

@@JLsAutoSolution Thank you!

[@Julicauto]

You can not do it with consult 3 plus? You have to pay $350 then/$450 now to download NERS and program a blank ECM for Nissan? Today I paid $40 for 24 hours access consult 3 plus 2r2 to program a 2018 Altima ECM and didn't give the option for programming or reprogramming. Do you know why? Thank you.

[@JLsAutoSolution]

I believe you need the new ners at 450$ for the 2018 models. it does suck but that's what it is

[@mmosienko]

Hi.Can a used ecu be reprogrammed? It is possible to use the ecu to replace

[@JLsAutoSolution]

yes, but only on certain models, you need to verify if the vehicles ecu is a (otp) One time Programming.

[@spleafplayzyt8078]

Does this work for Infiniti as well I have an 05 G35 and just replaced the TCM I need to reprogram it

[@JLsAutoSolution]

yes it works for infinity as well.

[@spleafplayzyt8078]

Can I just use a regular cable or do I specifically need the J2354? I was wondering if I can just program it from the software from my laptop once I get it but I’m having trouble finding my ECU # when I type in the first 5 or the last 5 vice versa no options popping up. I’m stuck!

[@JLsAutoSolution]

@@spleafplayzyt8078 send me a pic of the ecu number and I'll have a look. Send it to my email

[@CS2_Bernadotte]

Please Is it useful with Openport 2.0

[@btbuildthings]

Got a question for you. I have a used Nissan ECU that has a lock on it. I tried to reprogram the VIN with my Maxisys Elite to no avail. Will the Nissan Tool help me with this?

[@JLsAutoSolution]

it might.. but im not 100% certain. the vin should beable to be changed but if the aftermarket cannot do it I would try the oem software first.

[@btbuildthings]

@@JLsAutoSolution which nissan module will allow me to change the VIN and reprogram if needed?

[@drewg37]

Can this kit clone a keyfob and turn on a car??

[@JLsAutoSolution]

No sorry. It can only program and reprogram ecu and tcms

[@DarrenBoxhall]

Hey mate. I deal with Nissan patrols and use Nissan Data Scan to adjust timing and do work support ect. I really want full functionality of the propper Consult program. Is there Anything out there, software or scan tool that does what consult 3 does?

[@JLsAutoSolution]

Buy the mongoose for nissan from drew (500$ cad) and then purchase the consult3 r2r- its not perfect but it still works(

[@DarrenBoxhall]

@@JLsAutoSolution thanks mate

[@kwenmadeit]

Hello I own a Nissan Sentra and the ECM needs to be reprogrammed is this %100 guaranteed to fix it?

[@estatesrecords]

Hi, congrats on your new job. Do you think the VCX Nano could have done this as a J2543

[@JLsAutoSolution]

yes it could have as long as the vx manager is installed.. i have videos on this.

[@diegoffmusicvevo6201]

Hello, is there and special criteria for purchasing nissan programming software?

[@JLsAutoSolution]

just pay for it, its open source for j2534 devices.

[@Dunkex99]

Is their difference in the steps when reprogramming the tcm?

[@JLsAutoSolution]

no, you just need to select tcm programming

[@Dunkex99]

@@JLsAutoSolution I bought a refurbished valve body and when hooked up to my scanner I get the ecu part number but when I put it in to the Nissan tech page to get the files nothing shows up

[@JLsAutoSolution]

@@Dunkex99 you should on need to do relearns with your Diagnostic scanner.. since the TCm was not replaced.

[@Dunkex99]

@@JLsAutoSolution my car is an xterra that has the transmission radiator problem. The valve body I ordered came with a tcm

[@ladywizard4299]

WHAT TYPE OF CHARGER MAINTAINER DO YOU USE?

[@JLsAutoSolution]

i actually made one, i havent show cased it yet.

[@kwenmadeit]

Hello I own a Nissan Sentra and the ECM needs to be reprogrammed is this %100 guaranteed to fix it?

[@kwenmadeit]

It’s a 2004

[@JLsAutoSolution]

as long as all the diagnostics have been performed, then it should.

[@RcSpecialistKid]

When i go to the x86 programming files the nissan reprogramm file isnt there do you know what i have to do?

[@JLsAutoSolution]

did you download it if so check your downloads file and also check the downloads section of the the web browser you should be able to locate it in one of those places.

[@iankelly2110]

well done bud another Paul Danner

[@JLsAutoSolution]

thanks ... I'm a couple of years off from Paul Danner, maybe one day.

[@wedolocksmithorlando]

can be i use used ecu?

[@JLsAutoSolution]

Depending on the years yes. you can program from a scan tool, with the newer years you might need to clone it or get a new one.

[@gtautomotive22]

This is very cool. Do you program all kinds of cars?

[@JLsAutoSolution]

I try my best lol..

[@mfsperring]

First off congratulations on the going full time on your own and of course the teaching. From my point of view that can only mean good things for future videos. One question. In some other videos I've seen for reprogramming they talk about partitioning their laptops for different manufacturers. Has that been your experience?

[@JLsAutoSolution]

I've seen that also but I have yet to have any issues, I even use the fords fjds and Mazda's j2534 software on the same laptop with no issues(yet lol). I was just thinking of having external hdd's for each, keeps it cleaner, and les partitions will keep your computer running smother as it does not need to look in other drives in order to operate properly.

[@mfsperring]

@@JLsAutoSolution you should get Gibby to try that first. 🤣

[@josephgomez5557]

awesome video!! few questions what application are you using to unzip the program files ex: (winrar) i believe its called ? also lets say we finished programming a ecu for a nissan do i delete the old files DAT CSV FILES before i do another nissan or infiniti ecu or tcm module? or will the new files overide what was previously in nissan software. thank you so much keep up the great work!

[@JLsAutoSolution]

keep the files so you dont have to purchase them again.. copy and and paste when needed.

[@SpringvisualTk]

Thank you very much for the video. Wanted to ask, is this procedure used also to sync a used ECU to a diffrent car which had a faulty ECU? I think that also ECU cloning is sometimes used for that instead of programming with OEM software, and is done tuning software like KESS or KTag, but I'm researching both as I'm not sure if cloning won't pass over the problems of the faulty ECU to the new one. Very much appriciated if anyone can throw a bone, a bit of a newbie to programming, since our locksmiths focus on Immo only, but we had many request to fix a car that won't start due to an ECU replacement, and obviously it's not to do with the immobilizer, thanks again.

[@JLsAutoSolution]

I have another video coming out doing exact what you are asking. As for kess a ktag ktag is used for on bench programming with a bdm and kess is used with the obd2 port, now from my knowledge if you use kess to copy the data there is a possibility that the checksum will no be performed which then you will need to use ktag in order to perform the checksum on the file befor installation. As for immo issues- it really depends on the vehicle. some can be relearned very easily while others are a little more complicated. thanks for watching

[@marstedt]

18:17 - Instructions were to turn the car ON after 1 minute, THEN click [OK]. FYI 18:55 - Results (you had me worried)

[@marstedt]

Can you pin a comment regarding the DTC / issue that required this update?

[@fernandohood5542]

Nissan NERS is dead as of August 2024.

[@JLsAutoSolution]

thanks for the update.

[@godbound]

Why do u mention it if you going to hate