Excellent video. Ivan. I learned the hard way in my younger drive ability days. Before I blame misfires on fuel or ignition. I check relative comp with trigger with amp clamp. FLS in tailpipe,intake vacuum,crankcase pressure, both running and cranking. One test may find something that another test may miss. Wishing you and Evans all the best
@stephleonard25447 жыл бұрын
Mark Ferraro After the comment "another fault introduced during the repair process" I was belly laughing for a good half hour, then I read your comment and broke down again. Before starting the engine I thought this was a serious video. Clearly some sort of joke. Once the engine started I was clear what was wrong. Good funny video. Love. Just hope it isn't really customer that had to put up with the initial garage incompetence. WOW WTF well funny. Some divs about.
@baxrok2.8 жыл бұрын
Nice quick diagnosis Ivan. Very cool that you got to meet another subscriber. Thanks!
@Autofixpals8 жыл бұрын
Nissan doesn't give misfire counters even in the factory scan tool (consult 3+)..i work for Nissan. Awesome video keep up the good work.
@stephleonard25447 жыл бұрын
Auto Fix Pal don't need misfire counters when you can fit a broken second hand engine to speed your diagnosis.
@GeraldThomasphotojunkie8 жыл бұрын
They didn't shoot the parts canon at it, they fired a parts cruise missile at it!!
@ericcorse8 жыл бұрын
LOL
@GRowe19788 жыл бұрын
That car endured a full on parts assault!
@cojones85188 жыл бұрын
Nuke it from orbit. Only way to be sure.
@Mabeylater2937 жыл бұрын
Yup too many substandard parts too I bet.
@Born_twice.5 жыл бұрын
😂😂😂
@ahkillez645 жыл бұрын
Love diagnosing stuff and using the scanner to pinpoint problems without replacing every damn part hoping to finally fix the problem
@openeyes-4114 жыл бұрын
Dude you make house calls like a doctor from the old days - THAT ROCKS!!! 😎👍
@dfields95114 жыл бұрын
Excellent diagnose. the 3.0L v6 older engine I think is better engine I think. I have one 205k miles, 19 years old, just now started having issues, misfire , it was #4 coil and changed all 6 plugs also. now its the trans P0744. been working thru that. Did ATF Service with Valvoline Synthetic ATF and Lucus its been alot better going to change the ATF again after 5K miles to get more of the old ATF out, since its black again already. been doing good I had to clear the code 4-5 time now its been 500 miles since last time I cleared code and hasn't come back. suspect it was sticky TCC solenoid and shift solenoid(s) . That sounds like a broken valve spring or lifters issue
@billyr98408 жыл бұрын
Wow , what a adventure that was ! Nice diagnostics ! Like the on the fly Cylinder Drop Test ! Nice !
@fieldsofomagh8 жыл бұрын
That was one mean diagnostic session.The relative compression test got to the core of the problem.Very handy turning the injectors on and off with the scanner.I also liked the coil and injector wave form.Can't whack a car doctor who knows what's up with the patient !
@PineHollowAutoDiagnostics8 жыл бұрын
Thanks Tom. Looking back at the case study I probably should have started with the compression test, considering how terrible the engine sounded mechanically!
@skunnysss7 жыл бұрын
@2:59 - yo I swear that maxima dude's doppelgänger walked by right behind them!
@denos.26884 жыл бұрын
skunnysss - I saw that to. L.o.L
@charlesvernon54505 жыл бұрын
I would check for exhaust manifold leaks on 4and6. Not enough back pressure can cause misfires too. If he's using the same exhaust system that is
@lastfirst51547 жыл бұрын
You guys have the same personalities. Awesome diagnostics. I will use that info on my 97 maxima. Or at least the methodical train of thought in the diagnostics. Process of elimination. Thanks guys.
@stephleonard25447 жыл бұрын
Last First LOL
@joe2mercs8 жыл бұрын
Eric O at SMA did a loss of compression study on a Honda V6 recently, just one cylinder was bad (from memory cylinder 4, front on passenger side). It might have been a help to the customer to determine whether the compression loss was due to valve seating issues or worn piston rings but in the absence of a smoke machine or compressed air you did a great diagnosis Ivan. At least the customer now knows that all the engine ancillaries work.
@PineHollowAutoDiagnostics8 жыл бұрын
Definitely not worn piston rings...that compression hump was missing entirely. Plus all the valve clatter was a big clue ;)
@willemstreutgers11548 жыл бұрын
Might be a broken valve spring or clogged valveshaft.
@deepsquat6008 жыл бұрын
All that part swapping for no reason ..killing me.... I had a friend do that a few years ago ..he finally just bought a new vehicle.. but swapped out all but the computer ..all because he didnt want to pay my friend 100$$ to diagnose LOL
@willemstreutgers11548 жыл бұрын
Partswapping without good diagnosis is only afordable when you have a tree in your yard on which greenback's are growing.
@alkalineph94465 жыл бұрын
This customers experience is the reason why customers do not trust mechanics and want to see EVERYTHING!
@GeorgeDekker8 жыл бұрын
For clare, umbrella comes to mind. cool video!
@johnmckamy63988 жыл бұрын
man I feel sorry for this guy , they screwed him hard
@willemstreutgers11548 жыл бұрын
Me too
@volvo098 жыл бұрын
that was cringing to watch, those prior repairs were brutal! I really hope that customer will get their money back or get their original engine back... every step of the way that person was hit with incompetence and a lack of knowledge. someone suggested a throttle body for a misfire? a shop throws an engine at it without verifying compression! and let's it go without doing the same, AND with that sound! holy crap!! that's the kind of work that gives Indy shops a bad rep!!!
@PineHollowAutoDiagnostics8 жыл бұрын
Customer might have done a lot of the work himself too...but yeah what a mess!
@infinity3jif8 жыл бұрын
i don't even wanna know how much money was lost in this car
@pilskadden8 жыл бұрын
Wow. So many parts swapped and messed around with by incompetent mechanics. Car was repaired to death it seems.
@jorgeboyas22554 жыл бұрын
This video is a classic! The first two minutes of start, "I love it" Cannon...
@moadeebjudahbenisrael20308 жыл бұрын
There are some good shops in the metro area but they are few and far between,Hacks as some subs call them are every where in the area. Lived there 25 yrs of my life.Go get your money back for that motor or sue them
@leoflores32277 жыл бұрын
Hey awsome video brotha! I had the same exact issue and sound coming from my 2003 nissan altima 3.5. Just by hearing it I know the timing chain or the timing chain tensioners are bad. Nissan has a bad reputation for their timing chains going out. The timing chain causes a lot of random misfires.
@stephleonard25447 жыл бұрын
Leo Flores LOL exactly the same problem. WTF you had a misdiagnosed injector and mistakenly paid for a broken engine to be fitted. LOL
@armandonika8 жыл бұрын
Holy shit he bought it twice with what he spent on parts 😂😂😂
@newamsterdanm3 жыл бұрын
ke mamada panxito 😅🤣😂
@Krillekris8 жыл бұрын
Nice of you to help a brother out. But I feel sorry for the guy.
@NextLevelAutoDiagnostics2 жыл бұрын
Wow....a 5 hour drive to help out a subscriber! Ivan....I didn't know u made free house calls.
@SmittySmithsonite8 жыл бұрын
I think they make a laminate that will stick on the screen that cuts glare. I remember seeing it being sold for desk/laptop computers. Can't speak personally to how well it works, but from the pics I saw of it, it looked like it worked pretty good. Easy and cheap enough solution I guess. I feel bad for Evans - that garage took him for a ride. Mechanics like that give all of us a bad rap. That garage should work for the government - 2 peas in a pod ...
@PineHollowAutoDiagnostics8 жыл бұрын
Actually Evans is the mechanic of last resort in this case, not the owner of the poor Maxima ;)
@SmittySmithsonite8 жыл бұрын
Ahh, 10-4 - thanks for the correction. Sometimes my comprehension skills are lacking ... :)
@WiitRiic2 жыл бұрын
My 2008 Nissan is having the same issue. I have replace all spark, and Ignition coil. I have also clean all fuel injectors. Now it's running lean, and is still misfiring at P0303 and P300. What could I do to resolve this issue? Please advise. Thanks
@wyattoneable8 жыл бұрын
Nice work on that one Ivan. It's always fun to meet subscribers. Too bad the outcome was not better for the guy. Maybe some kind of cardboard shield would help to reduce the glare?
@davesministry77898 жыл бұрын
Good job, in minimal amount of time. Danner would be proud. Keep going.
@cccdetective7878 жыл бұрын
Hi Ivan I enjoyed the video too bad about the swapped engine. As far as the glare issue I have a smoked plexiglass screen I cut from a damaged boat windshield, I glued a couple of velcro tabs to the top of my laptop and the edge of the sheet. When i sit outside I attach the plexiglass screen to the edge of the laptop and prop it up with a plastic prop stick. Works great as a shade and best of all did not cost an arm and a leg. Hope this helps and you can find something suitable. Brian & Shotty
@Travisfromoregon8 жыл бұрын
Can you live stream the verus screen to your laptop, and then display as a pop up?
@Gene_spade244 жыл бұрын
Lol... That guy Evans works on my Genesis. Excellent mechanic
@W.Khairi5 ай бұрын
If u checked the head gasket on B2, It might have helped,The minute he said it smoothes out off idle, I knew it was a valve problem. Most probably the used engine was originally replaced because it had overheated.
@JOHNPHUFNAGEL8 жыл бұрын
3M makes a screen protector/ antiglare for around 30 bucks if I remember right for laptops and universal cut to size
@sandyande8 жыл бұрын
thanks Ivan, one way to combat glare is to do screen recording on the verus like the master scanner danner, but then again that requires more work! cheers sandy
@SteveRobReviews8 жыл бұрын
WOW this is what happens I guess. Not a nice ending for the poor guy at all.
@kdmq8 жыл бұрын
Where do hack shops get all the parts cannons cause surely they replace those too?
@skunnysss7 жыл бұрын
Great video. Thank you. Liked & subscribed!
@lrdisco20058 жыл бұрын
Feel sick for the customer, at least he knows who to call in future.
@garyskidmore14508 жыл бұрын
Snap On should offer a hood for it's scanner? Google tektronix hood I used two different hoods testing and repairing MRIs world-wide. The oscilloscope and spectrum analyzer hood would be too small for your use but you'd get the idea.
@jasonfromm56372 жыл бұрын
Are u gonna come back to Brooklyn, would be gracious for a top notch diagnosis on my 15 pathfinder
@OliverKoolO2 жыл бұрын
Nice work
@abdouallahuniverse56895 ай бұрын
After trying regular tunup (spark plug, coils), they should try valves adjustment if it dosent has automatic jydrolic adjuster, after that check timing, xheck VVT if it has one.
@ozzstars_cars8 жыл бұрын
A $50 pop up portable tent, sets up in 1 minute. Keeps the rain drops off also.
@PineHollowAutoDiagnostics8 жыл бұрын
That's a good idea...any specific recommendations?
@ozzstars_cars8 жыл бұрын
Yes. A 10' x 10' is light and easy to set up solo. I will message you the link. And for the rest of those wondering, I dont sell pop tents, I work on cars as a serious hobby
@arciefan8 жыл бұрын
The recommendation I would give is consider getting your own shop. Does not have to be some modern building inside the city. The shop I go to is built outside the man's house and very successfull because of their honesty and good work reputation. He is approaching retirement age and still working some but mostly his son runs it. Most times I go there , I see a half dozen vehicles there for service. Just my opinion, but would love to see you in a controlled environment as the owner / operator. Most people don't mind paying for good service, others want something for nothing or close to it. Just my opinion, and talk to Eric O and see what his advice would be.
@ozzstars_cars8 жыл бұрын
arciefan the question has nothing to do with what you wrote. Have a nice day
@arciefan8 жыл бұрын
The recommendation I wrote had nothing to do with what you wrote. Wasn't questioning your suggestion at all. Maybe I should have written it on its own as to not rile you. Since I'm unable to move it, accept my apologies. Was not aimed at you.
@BigDog500018 жыл бұрын
Who needs diagnostics when you can just fire the parts cannon at it....
@crcdesign98867 жыл бұрын
Big Dog50001 the sad thing is a lot of people are like that and will justify themselves to the hill just because they don't want to pay a diagnostic fee. I see it a lot with some new customers..It's hard to break them away from the AutoZone/Advance Auto parts changing me mindset.
@jasonhardison71037 жыл бұрын
Big Dog50001im totally stealing parts cannon from you.
@breegarneau26216 жыл бұрын
ive had so many things cause a misfire on my 99 maxima its hard to keep up. mass air flow sensor, plugs, coils, orings , bad fuel but never had a cylinder drop nevermind 2 of them in a bulletproof vq engine check other shit man
@openeyes-4114 жыл бұрын
3 words: Timing Belt Failure... He's got compression issues on 2 cylinders, and (on my phone) the valve train sounds like shit - and this is an interference engine...
@JB-zy4me6 жыл бұрын
Hello sir I have Nissan Maxima 2006 I had miss fire then my friend replace spark plug and one coil now my idle is high I replace trottll body still having problem please any idea for me
@westtexas5018 жыл бұрын
Mr Ivan do you have any videos on how to perform a relative compression Test ?
@aaroncuthbert3788 Жыл бұрын
However, what was the initial middle cause?
@pdv91843 жыл бұрын
This Vid reminds me of dealing w/ a 96 buick /GM 3100W/ ax 200k . I watched a Video where a guy intentially blows up his 3100 engine. Its a tough call people. I Recommend watching "Death of a Salesman".
@yoshiko1307 жыл бұрын
Subscribed! Thanks to Eric O & I have a Nissan but what shop replaces an entire engine without doing a simple compression test?!
@user-qr6zh9ev8k4 жыл бұрын
So many things could cause this most of the time it’s coils or plugs or o2 sensors and cats cause it to run rich. Those are the easiest fixes some of the bad ones are timing chain problems like jumped or the rear housing leaking oil Nissan is a love and hate relationship
@LetsPlayDaPc7 жыл бұрын
hum what about the valves that sounds stuck open ...
@pierrebrunet15296 жыл бұрын
For your glare did you try a anti glare glass that they use on picture frame over your scanner screen ????
@lovetolearn52538 жыл бұрын
Wtf I can't believe someone called just listen to it drag it to the back and put it out of her misery 9.01 pm time of death
@loebruce4874 жыл бұрын
Try the big three upgrade all of your grounds must have top notch grounds,it did wonders for my 02 maxi
@johnaranjo20594 жыл бұрын
first of all replacing only 2 coils was a bad idea, should always replace the lot. is there oil in the spark plug tubes? common on these
@NN-gy7xl7 жыл бұрын
poor guy . get the old engine back in or get shop to pay for cylinder head job after u do leakdown test. just bring it to eric o :)
@sonsautomotive8 жыл бұрын
are the injectors bank fired? just wondering why the injector power balance seemed to show all cylinders where working?
@PineHollowAutoDiagnostics8 жыл бұрын
Good question...and I don't really have a good answer to that unfortunately.
@tiennguyen-nq7me7 жыл бұрын
Nissan Maxima Misfire case study: Staten Island Express Ep. 5.1
@jgeorges30618 жыл бұрын
IVAN,thanyou for all the videos and info u show keep it up and cheeeeeers.
@rejmonwilson8 жыл бұрын
I had a 2002 altima what a piece of junk!.good luck get rid of the car, bring it to South Main Auto. Eric will fix it!.
@opel-ll6gz8 жыл бұрын
у вас там что нет простого компресометра, открутил катушку, воткнул крутанул увидел, сравнил с нормальным, сделал выводы, делов на три минуты, тем более что нерабочие цилиндры спереди и это просто удобно сделать. А вообще интересный у вас там подход, отличается от (русского). Мы мыслим по другому
@anyheck8 жыл бұрын
You can try a polarizing filter to reduce glare, but it may also interfere with the LCD as they are polarization based. Otherwise low tech a shade, or high tech screen capture software.
@suzannepratt79876 жыл бұрын
I have the same car and the same noise I had the cylinder and spark plug change and it Still sound bad could it be I need to change all the cylinder and spark plugs..
@trainer20188 жыл бұрын
Hi Ivan couldn't really tell from the glare but where was the ignition synch at in relation to TDC? I thought it looked off but the glare got in my way.
@PineHollowAutoDiagnostics8 жыл бұрын
That's because the sync was on cyl #6...one of the ones with no compression lol
@trainer20188 жыл бұрын
Cool, screen had so much glare I couldn't tell,lol.
@rcchar8 жыл бұрын
How about getting a cardboard box. Put the Varus inside the box and us the flaps to help shad the screen?
@rubengarcia69205 жыл бұрын
Coils coils coils lol always the ones under the intake😂
@coollasice41758 жыл бұрын
If the "repairs", changed engine, injectors, coils, throttle body, etc... does not fix the problem, how can the customer be obligated to pay for all of that since it didn't fix the problem? Doesn't the repair shop have to pay for it?
@PineHollowAutoDiagnostics8 жыл бұрын
Good question...I think the customer did a lot of the repair work himself. The repair shops just "guessed" at the problem and told him what it "might" be. So in this case I don't blame the shops at all since they didn't perform the work!
@crcdesign98867 жыл бұрын
motoYam82 totally agree. I get people like that sometimes. They try to pick your brain and then go do the work themselves.
@evanfinlayson5114 Жыл бұрын
2014 nissan maxima sv when warm or after one hour driving begins to idles high and battery drains then limp mode anyone please help
@PineHollowAutoDiagnostics Жыл бұрын
Need a code scan
@alipsettphoto6 жыл бұрын
To minimize the glaze see if you can get a circular polarizer filter for your camera.
@ianlevine2738 жыл бұрын
Sometimes a good fix on the screen glare is to set it inside a cardboard box turned on its side.
@renewedautodiagnostics65258 жыл бұрын
there are really nice anti glare screen protectors, i would definitely put it on
@Adam-bw4lw8 жыл бұрын
Nice,a can of engine restorer could fix it lol
@MrPigganning2 жыл бұрын
How do we get in touch with you, for working on cars
@PineHollowAutoDiagnostics2 жыл бұрын
Website
@clide425 жыл бұрын
How can I get in contact with you other than on KZbin
@naushadali955 жыл бұрын
super video.
@egyMag19905 жыл бұрын
i wish if you could upload your videos with better quality like scannerdanner
@robertvincent56783 жыл бұрын
The cat's on all those 2.5 and 3.5L were junk and known for clogging and P0300👌
@codycarson52168 жыл бұрын
Hey Ivan they make a privacy screen protector for tablets that is mat that should minimize the glare
@cojones85188 жыл бұрын
Well that sucks for the guy. Guess a leak test or smoking it to see which valve(s) are leaking. Then it's a question of a valve/head job, swapping the engine back, or getting a new car. As far as the glare, you might could get a couple blankets or beach towels to throw over the windows to block the light for in car shots. For outside put the scanner in a cardboard box and cut three holes in it, one small one for the camera, one small window to look through, and one large one with a cloth over it to reach through to operate the scanner/computer. Dorky fix I know, but best, cheapest options I can think of off the top of my head.
@ronaldopanaligan69754 жыл бұрын
Why is he even doing a compression teat when he know the misfire is not engine related. Why don't he figure out the cause of the misfire which I think is fuel delivery issue since it is P0300. A cylinder specific on nissan cars is usually faulty PCM, how do I know? because I rebuild car computers and nissan vehicles are notorious for bad ignition driver IC and also although not related to misfire they are also notorious for bad idle control solenoid driver IC which shorts out due to overloading cause by stuck solenoid
@chungaleta12348 жыл бұрын
Nice vid. One question which may be stupid though.... Why not make a manual PSI compression test with the gauge? Just to see how bad they are.
@coollasice41758 жыл бұрын
*Absolutely.*
@PineHollowAutoDiagnostics8 жыл бұрын
0 psi...or very close to it.
@nathanrspain8 жыл бұрын
Definitely bent valves
@chungaleta12348 жыл бұрын
Ohhh I see. Didn't know you tested them. Poor owner.
@coollasice41758 жыл бұрын
The injector drop test showed that the engine slowed down the same when #4 and #6 were disabled, so their compression might have been similar to the rest.
@dhestondh6 жыл бұрын
Intake manifold gasket
@stephleonard25447 жыл бұрын
Why didn't they change the gearbox? Won't that cause that misfire? Also sometime rear bench seats can have a coronal effect causing inferometry and misfires can be produce via smelly pooh pooh reason. I you attach the scope positive to the cars antenna and scope negative to a dowsing rod held in the left hand while wearing protective hearing defenders you should be able to find all the faults making millions
@PineHollowAutoDiagnostics7 жыл бұрын
Drugs are bad...mmmkay?
@rachellocks16233 жыл бұрын
Maybe 4 and 6 cables crossed up?
@trippplefive6 жыл бұрын
dude needs a gopro strapped to his head so he doesn't have to carry that camera.
@cars9298 жыл бұрын
Yep to minimize glare i set the screen to the brightest setting
@PineHollowAutoDiagnostics8 жыл бұрын
That's as bright as she gets!
@jimmiemiller50553 жыл бұрын
out of gas?
@anajay788 жыл бұрын
Sounds horrible.
@amandavanallen88794 жыл бұрын
I desperately need help with my 97 Nissan Maxima!!!!! #4 misfire....
@markusdd58 жыл бұрын
Honestly, these Snap-On Scanners seem like a huge rip-off to me. I don't know how in the world one would engineer a professional tool for in-fiel use which has a glare display. And the User Interface is an absolute mess too, you have to go through a thousand menues to test all injectors it seems. That thing is not worth more than one of the chinese Autel things. Actually I think a Picoscope and an Autel is better equipment than that thing... Nevertheless, a great case study as usual Ivan!
@PineHollowAutoDiagnostics8 жыл бұрын
The Verus does shine in saving time and saving data...a true all-in-one tool.
@markusdd58 жыл бұрын
true, but the price seems ridiculous for what 'simple' mistakes have been made when designing that thing. I mean a bright non-glare display is no magic these days, so I don't get why they would use such a bad unit in there. And when I remember how many times Eric O's Verus broke...for 10-15k you should be able to expect something better.
@PineHollowAutoDiagnostics8 жыл бұрын
Oh mine is a 2008 model and I got it for a grand lol...definitely wouldn't buy a brand new one! Those are way too pricey!
@markusdd58 жыл бұрын
Ok, 1k for a used one is probably a good deal. How much do they want for updates?
@Dee-sq5sb5 жыл бұрын
He should have kept the first engine in the car
@williamwhitehead83625 жыл бұрын
Make a shaded box for the skater!
@andrewvillanueva42226 жыл бұрын
Made that is a bad engine. That sucks. Bring the engine back.
@ahkillez645 жыл бұрын
No parts can fix the motor except a rebuild or another motor. Motor is busted
@darrellbailey19717 жыл бұрын
Use a pop up tent to film under
@christophenchare79945 жыл бұрын
J ai une Nissan maxima automatique qui démarre bien mais n accélère pas