NISSAN ROGUE TRACTION CONTROL LIGHT (SKID LIGHT) FIX!!! NO DTCS IN THE SYSTEM.

[@saulrodriguez6055]

I have a 2013, exact same problem with the 2 lights on, no issues found after scan and it got fix with this video... Thanks a lot for sharing! Much appreciated 👍🏼

[@richardcowan996]

Hey brother I have one that has me stumped where was the fuse that you had to replace

[@wrichardwilliams]

I have a 2011 - Same question.

[@icmonstahs]

Did it prevent you from accelerating?

[@journeyman138]

I don't understand why people have to ramble so much. You seem like a great guy. I trust that you ran to check for error codes. You don't have to show that here. For everyone else, start at 2:46 to go directly to the fix.

[@melniksmotors]

There's always be haters. If you do not like it, move on. Life goes on right. Look for someone else's video. If it's not helpful. I did the best I could. I do not have professional cameras or camera crew. I do not read script.

[@journeyman138]

@@melniksmotors - I don't hate you. As i said, you seem like a really great guy. No digs on your camera either. You are just a nice guy trying to do the community a favor. With that said there are a lot of people that start off slow and go to left field, then to right, before finally running the bases. I was literally going through the first 2 minutes saying aloud; "Show us the fix." So not a hate. Just a suggestion.

[@tyayrecarter5411]

I understand you point but history is necessary. Sometimes it is different issues with the same fix, or different fixes for the same issue

[@eddieking9469]

Just a complainer, we get all kinds, great video.

[@stevechong14]

Muchas gracias me funcionó mucho el video, tenia encendida la alerta de *Chassi Control system fault* y tenía el timón bloqueado y al revisar los fusibles de la cabina había 1 que no estaba haciendo contacto y al fijarlo se solucionó el problema. Muchas gracias. Mi vehículo es Nissan Qashqai J11 MOTOR Mr20 2016

[@Dinalovesdresses]

Thank you! What’s the name of your specific scanner please?

[@michaelsims5749]

Do you have any idea what caused the fuse to blow? I’m a Nissan tech currently dealing with this same issue. C/s they have had all harnesses replaced by Nissan. Same fuse was blown for me as well

[@bestbomb17]

Also a tech here for a large trash company known nationwide, that starts with an F. not dealer related. Im getting the vdc off and traction off light after about 30sec to 1min of starting car. It is a 4wd rogue. All wss on each wheel were reading properly, no codes in abs system or anything. (Have yet to check fuses), but have you figured anything out? One thing i will note is a loud groaning from the rear when making a hard left or right turn. Have yet to figure it out given i cant hang out the back of the car while driving 😂. Also there is no abs light on

[@scottn6810]

Going to try my daughter’s Rogue tomorrow.

[@salviperez8068]

Think this is mine aswell would the light come and go?

[@dnltjr52]

My nissan rogue 2016 get a Blake and traction light indication. Please help

[@philscott1656]

Had the same problem. It was low on break fluid….fixed the problem

[@eminengin1418]

Thanks for the info. What is that scan tool you are using?

[@justinalexander1789]

Hey George how are you? What was the name of the scan tool you bought off amazon. I would like to purchase one

[@stephenamodio8631]

Where did you purchase the new fuse?

[@dimascartech]

you can purchase it at most auto parts stores.

[@divyeshprajapati8136]

which scanner do you have ?

[@vrm86gt]

my wife has a 2016 rogue with this same issue also has a p2004 intake manifold runner, had the vehicle scanned and it said can-bus communication error in regards to the traction control issue, the light goes off when you turn off and restart so i just restarted the car and left the traction control switch off but I will check this fuse tomorrow.

[@hockeyman1]

I've have close enough problem where my abs all wheel drive and e breake lights are on . Can it be fuse in my case ?

[@rosaliedefosse4742]

I have the same, third time, other two it went out on it's own, now I have a vibration!?

[@hockeyman1]

@@rosaliedefosse4742 alternator from what I've heard from others

[@neilwilliams2193]

Thank you bro for a very helpful video. Will this work on the 2013 Nissan Rogue 2? Thanks again man. Keep up the good work.

[@kbatch3800]

I'm having this same problem with a 2011 Nissan Juke -comes on when driving and give a stalling, bucking feel and I need to pull over and turn the engine off and restart. I spent over $2,000 trying to figure this out the mechanic couldn't find error codes for this but apparently found other crap wrong with my car that wasn't giving me issues.

[@LtMorningwood]

Change the brake light switch above the brake pedal.

[@can23rob]

Any luck? My 2012 Altima has the skid light on and won’t go past 2k rev

[@Totino015]

Robert Canchola have you figured it out ??? Mine just started this problem

[@can23rob]

Rolando Sanchez Na man I changed the mass airflow sensor 3 times now and the skids control light hasn’t come on in about 3 weeks I’ve been to 3 mechanics and they are stuck lol might end up taking to dealer,

[@Mrgym215]

I’m

[@dollydunn5652]

Hi, what's the name of the scanner you using on Amazon?

[@elijahnde1859]

Please, l have a 2012 Nissan Note automatic with same issue. It had an accident and was repaired. I have been driving for over a year and then the spiral clock spring failed. After replacing, this traction light has since remained on the dash. It was scanned at the garage and repaired as it went off. But soon when you drive a few yards, it comes up again. The steering angle sensor has been changed the second time but no positive results. I have watched your video, but l can't locate the particular fuse you are talking about. Can you help please. Thanks

[@fujifrontier]

You have to have the steering angle sensor reset/calibrated if the clock spring is done, with NDS II it’s $50

[@KarlHempfling]

I have 08 rouge the trackon lite come on the brake lite comes on while driving and brakes apply by them self any help is greatly appreciated

[@grktycoon]

Hi, can you please tell me what brand scanning tool you are using? Thanks!

[@melniksmotors]

Launch x431

[@chrisspag5080]

@@melniksmotors thanks. Do I need the scan tool to reset blinking airbag light? I just changed my clock spring

[@notsure9079]

@@melniksmotors dang ! $900 is steep for a do it yourselfer :(

[@BernardSimonet]

Great video. I have a Nissan Altima 2016 with same problem. But my fuse BCM SW is 5A , I checked and it's not burned. I don't see any other fuse 10A BCM.

[@brianmooney7009]

Same problem. Did u fix it. 2015 altima

[@matteroflifeordeatho4971]

Great video. Question. Was this issue due to the accident? I have a 2014 Rogue that was rear-ended and now we are having the same issue!!!!!

[@outletdecasas1882]

Did you get it fix

[@beardedberwick784]

thank you, i’ve had my motor in the garage since boxing day many parts fitted with no luck, thank you

[@Ehisus]

Please any advice as my Nissan too was involved in an accident repaired but driving for few weeks and when replacing the seatbelt that was locked due to the accident impact the lead cutoff and since the display KEY SYSTEM FAULT and would not start

[@BMW34567]

My same light is on to, but I am losing power can that still be the problem?

[@robertpsarudakis3474]

wife Versa did it this morning, her car was bought used and prob in a couple of fender benders. Prob the same situation.... every now and then she gets an air bag light to that come and goes when it want too....

[@7aric]

And by replacing the fuse that resolved the issue?

[@juanzunigamercado8960]

Does it work too if the dashboard light comes on and off

[@sergiocampos2777]

I have the same issue for my 2016 sentra SV, what fuse (fuses) should I look for, thank you.

[@Pahyasin]

Alguien sabe donde se encuentra el fusible del ABS, se estropeo el abs delantero y me aparece el testigo en el tablero de una rogue 2015

[@wrichardwilliams]

Great info. Both my slip indicator light and VDC light are always lit on the dash. I am going to check fuses. I would not have thought of that.

[@miklovelka2957]

I have same issue but mine goes away after turning vehicle off and on until it's gone. It does ride weird when that light comes on. 🤷‍♂️

[@grgyam9019]

i am having same problem with my Nissan Qashqai 1.6 Petrol 2012, i had issue with Airbag fault and i change the clock spring and that fault resolved but ESP light off and slip indicator light stays on. and that button i have in the car for ESP don't work either it might be the fuse blown off, i did diagnostic on my car but there is no fault. Thank for put up this video i am going to change fuse and i will see

[@Africanrealitynewscom]

George, thanks please what is the name of the scan tool? Thanks

[@brentjohnson2307]

So to summarise your 6 min + video in three words.. "check your fuses" you could have explained this in 60 seconds!

[@vinnydeville4675]

saying check your fuses isn't ajnt type of direction so let those that know how to help, help

[@diglightdig]

The guy that uploaded this video is trying to help people. Geez, give the dude some credit.

[@TalionvsWorld]

Thank you, as much as I appreciate the uploader for the video, there is a lot of wasted time in repeating trivial things over and over

[@diglightdig]

I understand, some people have more knowledge and can get impatient with this video. But... some people want as much info from these videos as they can get so they can feel empowered.

[@rosaliedefosse4742]

😢yeah like me!!

[@henrymotsemme9963]

please. what is the name of tbis scan tool and when can i find it. I tried all over here in south africa

[@KaytieBabooah]

Just a car scanner

[@leslielopez1086]

This is happening to my Nissan Sentra , could it be a blown fuse too ?

[@chuy28851]

leslie morales I have the same problem

[@vaiolover1997]

Check the fuse first. I check mine fuse, and it wasn't it.

[@LtMorningwood]

Change the brake light switch above the brake pedal.

[@ourhousedeals5152]

Thank you so much! Same exact thing on my 2015 Nissan Quest!

[@iink1509]

Hi, I own a Nissan qashqai, which is similar to the rogue. I did an engine replacement. Car runs fine, just that there's always a chassis control error, engine idle off(auto start/stop function) does not work and the traction light is always on. Any fixes, diagnostic scan tool can't clear the codes? Local agent wants to charge me a skyrocket price for "reprogramming" the ecu.

[@BarziHSaeed]

Did you check the hood sensor for the auto start problem ? There is a sensor in the hood lock to prevent the auto start if the hood isn't properly closed

[@marielbello2070]

What does TCS fuse says in the diagram for a Sentra?

[@edwinalexander1170]

What can be done if it happens that whenever you switch on a car all dash signs appears and disappears but for VDC and Airbag not seen at all? ? While they should appear and dissapears as others do?

[@davidmoralez6890]

I have the same issue on my 2014 Nissan rogue and I replace the same fuse but didn’t work still on. When I start the vehicle it’s not there till I start driving the car and stays on till I turn the vehicle off. Can anyone have an idea was going on.

[@pasulay]

Try this fix kzbin.info/www/bejne/iHXYXniEf6iLaKc

[@vaiolover1997]

I have the Nissan Rogue 2015 and it was bought as a salvage( hit from the right rear side.) The light kept going off and on for the last few months, and finally, it comes on after i started to drive. But my has the warning: chassis control, system error. Will check the fuse box tomorrow morning. Will have my car inspected this week.

[@cliby25]

This can be a pain as there are multiple issues that can give this warning. Mine used to shut down. And the code pointed to the throttle and tps. There was corrosion in the connector

[@vaiolover1997]

@@cliby25 I finally turned the traction control off, and the skid light is off.

[@iink1509]

@@vaiolover1997 how did u do it? By changing the fuse?

[@vaiolover1997]

@@iink1509 Nope. I look at the fuse and it was good. I only push the skid marks button and the chassis warning lights are off. Hope it works for you.

[@HH-ls3te]

@@vaiolover1997 where is that located

[@chevellemann8367]

Great video. Thanks for the advice. I have a 2014 NIssan Rogue. I replaced the fuse and it fixed the problem. Warning lights were off. My problem now is after a couple weeks, the lights came back on. I replaced the fuse and lights again went off. Then after one week the lights came back on. So I guess now the question is..what's making the fuse to go bad. Any ideas? Would it be a sensor?

[@WIZEMART]

There is a First big (size of your palm) splitter terminal on positive side of the battery - which I believe splitting the energy from the battery to the few systems - each splitter line supply few system. In my case U1000 code intermittently came with other systems like ABS, Ignition and airbag. There is a possibility that contacts there got corroded because the car battery leaking some acid and it gets there and getting corroded. It’s just one of cause that could be. I cleaned and it didn’t helped so I ended up with cleaning it with dremel or you can use just sand paper to clean the surface of the terminal. Those terminals hiding behind clear plastic window and if they are corroded you can see it. Not necessary it will help but a big possibility that will lol. Because it may damaging or corroding the circuit breaker eventually after few days because of high resistance at that main distributor which I mentioned earlier. Good luck!!! P. S. Used Blue Driver to get and clean codes.

[@motiontowing2243]

Bought 2015 Rogue, 67k miles, no lights but scan tool showing U1002 (J1850), nothing is wrong with the car, but any idea why this code is appearing? Thanks

[@greatyou9117]

This just helped me...thanks man

[@bigtuna4984]

Excellent video! Thank you for your help with my 2016 AWD Rogue!

[@evelynmolina6134]

Why does the yellow triangle icon appear?

[@TheFeloh]

The door is open

[@Pahyasin]

Fusible ABS donde esta?

[@George_S.G]

what is the name of the scan tool i dont see the links. thank you

[@covertops.]

He wrote it elsewhere: Launch X431.

[@bassinbillRC5300]

My BC infuse was not blown I had some carbon around one of the two feet of the fuse that goes into the fuse block so I went ahead and cleaned that carbon off on the fuse put the fuse right back in restart the car and voila.... That light went out

[@justinyang-ij5bd]

but problem is I checked all fuses all ok, the light still on.

[@billvekas3465]

Excellent. Genius.!!!!!!!!!!!!!!!!!!!!!

[@pacheco464]

What it’s the scanner name tanks

[@iftinchanneliftinchannel682]

Where can I find the scanner tool pleas and pleas thank you ur video is helpfull

[@تكنوكارلصيانةالسياراتالحديثه]

I have this scan tool I can sell you one

[@autotech6444]

تكنو كار لصيانة السيارات الحديثه where your location

[@seanoloughlin378]

@@تكنوكارلصيانةالسياراتالحديثه how much for the scan tool

[@تكنوكارلصيانةالسياراتالحديثه]

@@seanoloughlin378 ٠٠٢٠١١١٨٠١٣٥٩٧

[@chevellemann8367]

Looks like $863 on Amazon. Sheesh, I thought he said it's inexpensive.

[@mpdaugherty8549]

Thank you ❤

[@chuy28851]

I have the same problem my Nissan sentra 2012 sr

[@JB_Da_Real]

have you figured it out yet? i have a 2012 sentra also that does this randomly while driving

[@eddieking9469]

Did you get a reply I have the same problem with a 2013 Sentra for years now. Check engine on and off every few months, never a problem. Now anti-traction light is also on and that is where I have trouble starting and will not idle properly. Almost stalling at he traffic lights.

[@can23rob]

Any luck with this? I’m having the same problem on 2012 altima

[@gerardoflores5851]

@@eddieking9469 I got the same problem.

[@dnlp89]

@@eddieking9469 I'm having the same problem with my 2011 Altima. Did you find a solution to your problem?

[@higherregion]

Wow that actually worked.

[@davidbrown4868]

Muchas gracias.

[@gosgraproperties8687]

Thank you so much

[@Slidaulth]

You already said there were no trouble codes... Know what we didn't need then... A couple of minutes of no error codes.

[@melaniehooper3432]

Thank you.

[@MegaIndian83]

Many thx

[@notsure9079]

my vss switch would do nothing was off sometimes on checked fuse fine ended up very low brake fluid...... ( do not drop the cap, it's a bitch to find fell under battery ! ) not switch works :) now if I can get mu CVT trans fixed I'll be good LOL

[@ceciliahandsome2018]

Thank you

[@talangue]

you didn't fix anything. what caused the fuse to blow?

[@mikegonzales9041]

Looks like a Chinese Launch x431 .

[@tahjbeasley4155]

didn’t work and unclear , head stuck in muffler

[@rinnin]

Are you not concerned about the toxic fumes from your Engine idling all that time?

[@chmubshar6146]

nice

[@sharronclark7485]

What happened to nissan? They used to make a quality product. Not anymore! I have a 1999 sentra with 250,000 mile on it and it still passes inspection so I purchased a 2016 sentra, the 2016 is a piece of CR*P has that Stupid pure drive! Don't ever make the mistake of purchasing a car with pure drive! It's pure garbage!🤬

[@Bosco-knows-all]

"has came on" ?

[@silentrain2337]

Bummer, this tip didn’t work. The fuse was still good. Even replaced it with a new fuse. Light is still on. 🥹