Рет қаралды 21,291
Step-by-step guide on how to remove / replace / upgrade factory stereo on B16 Nissan Sentra ( 2006 | 2007 | 2008 | 2009 | 2010 | 2011 | 2012 | S | SL | 2 | SE | SE-R ).
Video on the location of all the radio fuses on B16 Nissan Sentra:
• Nissan Sentra - RADIO ...
Give me your support and join the channel:
/ @quitealright
Replacing the factory radio unit on Nissan Sentra shouldn't take you more than 15 minutes. First you will have to pop out couple of plastic trim pieces surrounding the radio to get access to 4 phillips screws. Once those are removed, you can pull out the complete dashboard radio assembly. Then remove screws from each side holding the radio attached to the dashboard assembly.
If upgrading the factory radio to a new aftermarket radio, make sure to get the proper radio installation kit and aftermarket radio harness. If replacing the factory stereo with the same unit, make sure to get the replacement radio code.
Thanks for watching.
Don't forget to Like the video / SUBSCRIBE to the channel!
⚠ DISCLAIMER:
While QuiteAlright strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. The videos are intended for information only. Follow the manufactures repair procedure and use appropriate safety procedures. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. QuiteAlright is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.