Nissan Titan Loose Shifter Linkage

[@flysubcompact]

Old Titan quit in a parking lot just now...watched your video..cable bushing in truck broke...two wire ties...back on the road in 15 minutes...thank you, Sir.

[@jhonzamora7692]

Thank God for this video. 1/4 of the way moving to another state this went out on me and I had no idea what to do. I thought i would be stranded. Thanks to this video i am able to continue my journey!

[@vj187dafl]

Thanks bro your a life saver. I was stuck in my son school parking lot after picking him up from school when this happened. I pop this video up and held the cable and drove my kid home and pick up the part to fix this problem. Thank you so much.

[@parkout95]

This might had been made 5 years ago But my man still saving us a couple hundreds with a mechanic Thanks! This worked on my infiniti QX56

[@waynepressley5201]

Not all heroes wear capes, some wear nitrile gloves. This video just saved me so much money on tow bill. Thank you!

[@guillermomartinez9902]

Apdty thank you for your video! It save me hundreds of dollars and time. It was very easy to fixed my 07 Nissan Titan shifter gear

[@angelicamartinez613]

Thank you so much. This same thing happened to my husbands truck. We didn't know what to do and your video was so helpful. My husband fixed it temporarily just to get home, thankfully we were close to it

[@kirkwillaims3000]

Yep stuck in a parking lot. I appreciate your time making this video. 5 minutes later I was headed down the road.

[@bobjuliano614]

Great video. After losing a bushing in the holes below, I threaded a thin cord with a key ring tied on one end through the bushing, and then through the shift cable end. This allowed me to draw it up to the cable end and squeeze it in without losing it.

[@treymckee]

Thank you for posting this video. Wouldn't have even known where to start troubleshooting. Bushing went out in gear selector. It took all of 5 minutes to find because of your video.

[@APDTY]

treymckee awesome glad it helped, thanks for watching and commenting, we appreciate it

[@briangimbel1069]

This just saved me a $200+ tow bill, and who knows how much in repair costs!!! Thank you!!

[@Falcon4924]

Thank you, I got stranded and was able to do a temporary fix to make it home. I clearly saw what I was dealing with and what to look for because of this video so thank you again.

[@APDTY]

HungryWookie awesome, great to hear, thanks for watching and commenting!!

[@renedelafuente123]

Just did this for a 06 Nissan Frontier. I'm glad you did not say it's as easy as 123. It's kinda hard when your second guessing and don't really what your doing, and might break something. Anyway got it done with the help of your video. I appreciate that, and keep those videos coming.

[@djlcruze]

Thanks for the video! Can you tell us what size is the crown nut you used? Thanks again.

[@skortsis]

Thank You Very Much !!!! You saved me money and time! I was in the middle of no were having this issue and because of your video I solved it in 5 minutes and I managed to get my family back home!!! Thx man!!!!

[@APDTY]

GEORGIOS SKORTSIS excellent!! This is why we love to make these videos, so glad it helped and thanks so much for commenting!!

[@lsixteenm]

Glad I found this video! Would have been stranded at the parking lot. Was able to avoid a tow, hold the rod in place and then order the part. Thanks!

[@juanlopez5834]

I got stranded in the scorching Texas heat 🔥🔥🔥 this awsome video got me home. THANKS!

[@Anthfigueroa]

You can still turn the car on wtf.

[@danielturner6523]

What Wayne just said. 20 years ago my $hit would have been towed out of the Lowe's parking lot. Awesome thanks for the parts Link too Bro🤟

[@kyleharrell1468]

Thanks for the video! I got stranded in the grocery store parking lot and zip tie rigged it to get home. I order the bushing from amazon $28, and went to do a proper fix the next day. I dropped the bushing trying to get it in place, and lost it. I ended up w/ the zip tie fix. ):

[@stevenbenavides03]

How well did the zip tie method work Kyle harrel?

[@ponchis1966]

Best video I’ve seen so far, like how you showed the best way to install the bushing and install it on the pin. 😊

[@guloguloguy]

WOW!!! THANK YOU, FOR DOING THIS VIDEO!! I HOPE THAT I NEVER HAVE ANY SUCH ISSUES, BUT, IT'S GREAT TO BE MADE AWARE OF ANY POTENTIAL ISSUES, AND HOW TO APPROACH THE REPAIRS.... GREAT JOB!!! "BRAVO!! = HERO!!!"....

[@WillG-l7q]

This helped me out so much with my 2007 Nissan titan and probably saved me a good bit of money thank you apdtv

[@APDTY]

Glad to hear that! Thank You.

[@LakeFrontReno]

Thanks for the video!! Same thing happened to me stranded at store one cold evening. But gone in about 5 minutes thanks to this video

[@phillipethan2293]

👌just replaced mine today. Only place I found that little part was online. None of the auto part stores carried it for my 06 Titan and the dealership sells it with the cable for $60. Got what I needed online for $30.

[@JavierPerez-vz1sw]

What website did you use to get the part? I have the same issue

[@outdoorjanitor]

Thanks, man! First one I've watched: too funny: last night late, I too was stranded in a parking lot on property I serve; blocking the dumpsters which will be emptied tonite; with a tfull trailer on my 2009 Titan, which has shift lever on the wheel unlike this one; crawled under to get my shirt dirty last nite w/ cell phone as a flashlight but I'm more confident now I can fix this this AM, b4 I block semi trying to deliver to Dollar General or something! - well, long-suffering wife rescued me last nite; back into her car to try to fix this. May look at one featuring a steering column mounted shift lever too; but very complete discussion!

[@APDTY]

outdoorjanitor awesome thank you for watching!!

[@davidmayorga2734]

Thank you for the video! How much torque did you put on the nut before inserting the cotter pin.

[@BlueHawkenator]

My 2006 Nissan Titan is parked in my drive, and won't shift out of park either! It feels exactly like this, and I'm betting in my case it's the bushing! Thank you SO much, will take a look and see!

[@gemmasantos8842]

It did happen to me yesterday while in the road. I thought it was a huge problem because in my mind it might damage the whole engine parts. Thankfully, there are 2 men who helps me a lot and checked it under. They made a temporary wire to attached or tighten its connection. They advised me to buy bushing for a replacement.

[@dfields9511]

another symption is one you put in park and try to start again, it will not start unless you jiggle the shifter ( p->N->P) or put in N. this almost acts like a bad neutral safety switch. the problem is since the bushing fell out but its still on the linage the extra space is causing an issue that when you got to park it , it thinks it is in Reverse. This was on a 2001 maxima with a RE4F04B transmission

[@antonioestrada6783]

Great video. That is what happened to my Titan. Looks like an easy fix.

[@movinginstereo44]

I’m sorry if I’m missing this someplace in the video or in the comments… But just purchased a Nissan titan from the auction with the same issue and I am wondering if you have the nut size and thread information?

[@emperorsadrax7242]

Great video, about to tackle this issue on a coworkers 2008 Nissan armarda after work today. I’ll update you

[@SamOwen-i5j]

I have a 2008 Nissan titan LE with the same center shifter problem. No one in my area sells just the bushing only sell the whole cable. Where did you purchase just the bushing?

[@SamOwen-i5j]

Amazon has them which is no surprise. They seem to have more than most department stores and cheaper. The part is called shifter cable bushing cost me $10.

[@tyhennymob2601]

Having this same problem so this may be a crazy question but my truck is having this same issue so my truck does start right up so I can assume that the transmission is in the park position?

[@ebookpioneers]

I have a 2nd gen Ram 1500 5-speed trans that runs and shifts great. I park it in gear of course, but I have a 5-year old who accidentally brushes up against the shifter sometimes getting out and pops it out of gear, so I have to use the E-brake when she's around. Why is it so easy to push the shifter out of gear without using the clutch? This is true when I'm out on the highway too. I just barely push the shifter in any gear (haven't tried it in reverse) and it pops right out into neutral. However, it never pops out of gear on its own, so it works fine. I just don't understand why I can just barely push the lever without using the clutch and pop it into neutral. Thanks.

[@juliebeane2407]

Great video! We just had the same thing happen! Now to make the fix!

[@mbet5486]

Hello, I've 2007 vette. Has exactly samething happened. What you think mechanic should charge?

[@joeker9448]

my shifter feels loose going in-between neutral and drive, It's almost like it skips over neutral and goes straight to drive if I don't push the shifter to the side a little, do you think mine could have the same problem as this ?

[@gustavoalvarez7294]

Does someone know the name of the plastic that holds the cup holders & and where you shift gears

[@SoonerPyro918]

What size nut was it? iv tried 10 different ones and cant get it right

[@urielgomez3701]

Did you find the size?

[@christopherregister23]

You just helped me big time thank you for this video.

[@Wildcat.058]

This just saved my ass I was stuck in the Walmart parking lot

[@APDTY]

excellent, glad it helped and thanks for watching!!

[@jasonbatchelor6472]

Leaving tractor supply last night same thing happened to me,great video 10 mins later fixed with zip tie and heading home,great video

[@YvonneEyo-rb3zm]

Thank You for making this Video. I just experienced this now as am about to drop my kid off at school. Thank you.

[@manuelmatos3399]

This video helped me out so much thank you thank you thank you

[@ericgomez4424]

Does the 2006 titan have thread on the transmission shifter? Don’t remember seeing thread on it.

[@APDTY]

eric gomez yes the top shifter knob is threaded on, the shifter itself is not, thanks for watching!

[@ericgomez4424]

APDTY I meant the one on the bottom where the shifter cable goes to the transmission

[@boorawsince]

What size is the bushing??

[@patricioaraya9299]

Excelente video, la pieza Dorman 14055 sirvió para mi Armada 2005, muchas gracias, saludos desde México

[@baylor51]

Spot on dude!!! You fixed me, great vid thanks

[@cesarloera668]

Thanks for helping me with this video

[@robertbowen6610]

Happened to me a few days ago just now saw the video I was able to fix it with a piece of a plastic applicator my wife had in the truck seems to work fine will replace with the proper part soon

[@kennethsouthern228]

You saved my ass bro, thanks a million

[@sixsentsoldiers]

Can you do the top like the bottom? Drill and washer pin?

[@PureSwank]

You said advanced auto bought it for you? Whats the part number and brand?

[@APDTY]

///One.Lawless we have a link below the video in the description area and a link to the part, amazon is the lowest cost

[@casade2831]

💪Thank you so much for your video. I had the same exact issue. You rock !!!!

[@Rebecca-ov6rs]

What size castle nut is needed?

[@masoudafshar4296]

Thank you for your useful Video!

[@ehabshady7984]

Thanks Do you have a link for Nissan Altima 2008 I have the same problem

[@APDTY]

Yes we do, we just listed it and we will have an image soon, here is a link amzn.to/2E9f6y9

[@EduardoRuiz-ky5md]

Where can i buy the Bushing

[@APDTY]

Eduardo Ruiz just under the video in the description is a link that will take you to Amazon for this exact part

[@APDTY]

Shift Cable Linkage Bushing Repair: amzn.to/2ooLh4G

[@adrianjimenez2556]

I have a 2011 Mustang GT and it’s stuck in park but when I release the shift lock to put it in gear it the wheels don’t spin

[@carczar956]

Where can I purchase this bushing?

[@APDTY]

amzn.to/2ooLh4G

[@ram457moreno]

Wish I saw this video my pathfinder cable broke on the shifter it was the bushing cost me 718.00 at the dealership they said they don't have the bushing so they had to replace the hole cable crazy

[@Musicofjonesey]

That little bushing whipped my___!

[@sc-palmettopride862]

Great video 👍

[@moneygrip4464]

You wouldn't remember the thread pitch of the castle nut would ya?

[@moneygrip4464]

12 by 1.25 with nylon locker

[@terryromero5191]

very informative!!!

[@tetariusgrimsley3503]

Life saver

[@susanpollitz6940]

Mine broke my mechanic is saying he can't get wires back in hole what is he talking about had my car 2 days

[@notfamouse120]

What is the mm size of the castle nut?

[@urielgomez3701]

Did you find out?

[@isaiasdeanda8430]

thanks you. you saave. me a. 600. dollars. trying to put a new shift cable

[@jksiajksia981]

this really helps. Thumbs Up

[@th3drizzl378]

lol use dorman part number 14055 less then 4$ on amazon and does the exact same job.

[@moneygrip4464]

I looked it up advance auto database tells me this part willnot fit. Will try anyway.

[@th3drizzl378]

@@moneygrip4464 it works trust me. this has now been used in many armada and titans including both of the ones we own.

[@moneygrip4464]

@@th3drizzl378 oh yeah man tried it anyway and needed a pocket screwdriver and some silicone grease a squeeze from some pliers and worked perfectly

[@davidalviso1249]

The best , thanks

[@enendugodwino2633]

Thanks so much bro

[@franciscafazzo3460]

thank you

[@APDTY]

thank you for watching

[@joshkillz2724]

What size is the scew

[@APDTY]

Josh killz sorry but can’t remember anymore,

[@joshkillz2724]

👌🏻 I already fix it

[@raymondgonzales3574]

What size was it?

[@TurnerLyfe]

Real deal holly field

[@JSchrumm]

Why go thru the trouble of drilling a hole when you could use a nylon locking nut? Or did you just have some old junk lying around the shop.

[@brianodom797]

With using the cotter pin method, I'll never have to worry about the nut backing off again.

[@crmobiledetailing165]

Thank you