I have a Nissan Caravan with a ZD30 engine and I have the same rev issues. After scanning it ahows that it is the accelerator pedal. Can I follow these same steps to cross the wires and plug it back in without anything getting damaged? Any help will be greatly appreciated. I love this video
@imeedesu1595 Жыл бұрын
Nothing to worries sir, I've been doing it too many times....no damages
@Eduinsamudio25 күн бұрын
Micamioneta prende la luz de check engine cuando esta en lugares calientes y en lugares fríos no prende la luz de check engine que puede ser
@Eduinsamudio25 күн бұрын
Mi camioneta prende el check engine cuando estoy en lugares calientes y en lugares fríos no enciende la luz de check engine que puede ser
@Aussiesnrg10 ай бұрын
Would you know how to get the fuel pump out of a ZD30 without taking the engine out? I've got it all undone, but the engine mount is in the way and it won't come out
@imeedesu159510 ай бұрын
You mean taking out the injection pump with out taking the engine out?
@Aussiesnrg10 ай бұрын
@@imeedesu1595 yes, that's just what I saying. I'm guessing by that question that the engine should be out to remove the fuel pump :(
@elliotkane44436 ай бұрын
@@Aussiesnrg Is it a DI or CRD? After 2007 should be CRD, they use a totally different Pump
@Aussiesnrg6 ай бұрын
@@elliotkane4443 Pretty sure it's a DI. I've got the pump loose, but there's an engine mount just in the way by about 10mm. It looks like Nissan cut a section out for the pump anyway, if they'd cut an extra 10mm more the pump would come out easily (after removing everything that is)
@emmanuelkasagga809427 күн бұрын
why is my nissan zd 30 not revving past 3000 rpm when accelerating
@peterlindley5839 Жыл бұрын
This did not work for me. I have the same issue, same intermittent throttle drop out exactly like this. I have replaced TPS, replaced micro switch, now i have just tried this as i was adamant this would fix the issue, however no difference... what do you think it could be? Still throwing 0403 code. Please help. Micro switch was doing what it was suppose to, as i accelerated with my hand i pushed the switch with my finger and bam, throttle drop out exactly like it does without forcing it on. I thought dodgey plug also, however thats not the case...
@imeedesu1595 Жыл бұрын
Try to check the harness or socket of the crankshaft position sensor... I'll send it to your messenger
@peterlindley5839 Жыл бұрын
Thanks mate, I have sprayed the inside of plug going down to crank sensor. Will see how it goes... I have also disconnected battery to reset ECU, 3hrs and I'll connect it back as I've read this is how long it needs to be disconnected for.
@peterlindley5839 Жыл бұрын
Didn't work. I have ordered a new map sensor and a new maff sensor. See what happens after they are delivered and in. ✌️
@peterlindley5839 Жыл бұрын
No difference. Still having throttle drop out issue. Do you think maybe where the micro switch wires go to have a bad connection? Where do those wires run to? Thanks
@rocknral11 ай бұрын
It is probably not the issue but in the last six months I've seen the rubber insulator between the micro switch and the pedal arm is loose on 2 vehicles. Sometimes it sticks itself to the micro switch and sometimes not. Peel of the rubber and all fixed. Hope this helps someone.
@AgusBagaspratama10 ай бұрын
Can this be done with engine code ZD30 D22... please answer... same problem with my car. Thank You
@imeedesu15959 ай бұрын
Yes, same with zd30 E25
@JonesCabangageCabangage3 ай бұрын
Estamos na linha de frente
@hajaniainarakotoharinjatov87635 ай бұрын
Hey, can i do this for my nissan patrom y 61 3.0 Di ?
@imeedesu15955 ай бұрын
Yes if you have problems like this,no harm to your zd30!if you have the pedal switch,then you can replace it,but check the plastic/rubber stopper on the switch, sometimes it's just the reason
@gabrielbarcena596810 ай бұрын
Mi camioneta en neutral o estacionada no sube mas de 3000rpm, sube muy lento , no tiene codigos de fallas ni nada , que puede ser ?
@imeedesu159510 ай бұрын
Better check out your turbo boost pressure,or your waste gate actuator if it's working properly...it should push up when engine is already running and pull down a matter of seconds when you rev it above 2000rpm up
@gabrielbarcena596810 ай бұрын
@@imeedesu1595 all turbo wirking all right
@BenjieTafalla Жыл бұрын
Boss skin 3wires pano kya?
@imeedesu1595 Жыл бұрын
Aling part sir n 3wires
@nixkoagbayani81989 ай бұрын
Sir pwede po pa explain pano po na fix. Dahil po ba weak electric connection? or ano po purpose nag pag twist sa wire thank you po
@imeedesu15958 ай бұрын
Pra po ma bypass n ung limit switch
@limboonabin85557 ай бұрын
Sem problem sir how can i slov
@imeedesu15956 ай бұрын
Splice it and connect those wires,
@anthonytmontalla5 ай бұрын
Hello. Sinubukan ko na po ito, hard starting sya kinabukasan, parang nawalan ng fuel sa IP at binobomba ko pa yung pung fuel pump para magstart. Tinatanggal ko nalng yung negative wire sa batt overnyt, kinabukasan pag kabit ko ng wire di sya hard starting. Yan nlng palagi ko ginagawa. Ano po kaya ang cause ng problen na yan Sir/maam? Thank you.
@imeedesu15955 ай бұрын
Check mo po ung battery or glow plugs if working properly
@honoriomarcos47002 ай бұрын
Meron po ako ginagawa Nissan patrol 2010 model.problema Pag tapak ng accerator walang reaksyon kailangan bombahin para markapower bigla namatay ano po kaya problema.salamat po
@edwindelatorre4164 Жыл бұрын
Anong mangyari kung direct na ang micro switch boss. Wala bang effecto sa system
@imeedesu1595 Жыл бұрын
Wala nmn po harmful effects....ilang years n rin po nmin ginagawa yan s mga zd30 e25
@arokamena1592 Жыл бұрын
You’re a Genie
@imeedesu1595 Жыл бұрын
No harm with the engine and electronics components
@gerardberges-q5w Жыл бұрын
EXCELENT
@imeedesu1595 Жыл бұрын
Thank you
@christianhortaleza249 Жыл бұрын
Maygad. Kailangan ko masubukan ito, ang tagal ko nang problema to. 😂
@imeedesu1595 Жыл бұрын
Yes sir
@АнтонМотов-ъ3л Жыл бұрын
Wynn”s промывка для дизеля
@imeedesu1595 Жыл бұрын
Yes sir
@johnpaullipardo72374 ай бұрын
boss yung nissan patrol ko lakas humatak.pag sa patag pag sa aahon dun nagkakaproblema nawawala galit ng makina
@imeedesu15954 ай бұрын
Scan po sir para makita ung mga parameters ng sensors para tama ang gagalawin ....pwede mo po daladin sa shop ko for scan and diagnose
@allancomullobo6705 Жыл бұрын
Hello po!nag ho home service po ba kayo..
@imeedesu1595 Жыл бұрын
Hindi po
@shaquelmagiccarrera589 Жыл бұрын
Boss may ginagawa ako di kobparin mapatinu low power tapos White smoke
@quiellima584811 ай бұрын
sir pano pag nagrerev din walang power sa sensor kaya un kasi pag malamig okay pag uminit at nahinto di na marev
@Eduinsamudio25 күн бұрын
Mi camioneta prende el check engine cuando estoy en lugares calientes y en lugares fríos no enciende la luz de check engine que p uede ser
@AgusBagaspratama10 ай бұрын
Can this be done with engine code ZD30 D22... please answer... same problem with my car. Thank You
@imeedesu159510 ай бұрын
Yes, absolutely! it can.they have the same with E25
@Eduinsamudio25 күн бұрын
Mi camioneta prende el check engine cuando estoy en lugares calientes y en lugares fríos no enciende la luz de check engine que p uede ser
@Eduinsamudio25 күн бұрын
Mi camioneta prende el check engine cuando estoy en lugares calientes y en lugares fríos no enciende la luz de check engine que p uede ser
@imeedesu159513 күн бұрын
Check your coolant temperature sensor, your cooling system