New O Scale Layout update May 21 2024. The start of a final journey.

[@davekastner3590]

Nicely done Marc! Enjoyed watching the video and your commentary.

[@escape150]

Nice to see you back Marc

[@Woodknotta]

Great setup! Love the long straights and your use of multiple curves in the back corner, instead of just a big “O” loop. Keep up the great work!

[@Rocky-xx2zg]

Thank you. This helps with my planning. Best Wishes always.

[@alleghenyshenangorr2017]

Nice space, I love seeing layouts come to life from the creativity that inspired them, more updates please! Keep trains rolling!

[@chrisgray318]

Just subscribed. Nice work. Keep them coming for us newbies.

[@marcsoscaletrains]

Thanks for the sub!

[@epictrains4170]

That’s a very nice layout. Looking forward to seeing more in the future!

[@marcsoscaletrains]

Thanks for stopping by

[@bobr511]

Just saw your video! I just subscribed. What attracted me was how similar your bench work is to the layout I started in April of 2020, when I was stuck at home for a good part of that year. At the time I was able to get 1/2” MDF to use for my tabletops at an inexpensive cost. I also did use 1/2” foam glued to the tabletop and Gargraves track. For your “duck under” consider using an MTH arch bridge and hinge it to one side, or get the Mianne lift section. Either way will make life easier to get into the middle of your rail empire.

[@marcsoscaletrains]

Thanks Bob. Definitely looking into a couple options for the duck under section. With 3 tracks going over that area I will definitely need to look at some options.

[@TheForbiddenRail]

Fantastic layout so far. Would love to see more videos from you in the future!

[@marcsoscaletrains]

Thanks for the comment and the view.

[@Coreyt1976]

Looks good, would like to see more. I love those double stacks.

[@brandonpittman4778]

That’s a very huge layout man🔥🔥

[@dagryffynhobby]

Wow, this is going to be a great layout. Please do keep us updated. I’m interested to see not only how it goes but also how you do it.

[@luvindemtrains]

Nice introduction to your layout. You have a lot to work with and those long runs are going to be awesome. I liked that you mentioned what your focus will be and are looking ahead to the future. If I ever get the opportunity to build another layout there will be several changes including access, climbing, and bending issues. I know how challenging it can be to document your progress but if you could share your layout milestones with us that would be great. Congratulations!

[@marcsoscaletrains]

Thanks for the awesome comment. So glad you stopped by. I am going to make an effort to update a bit more often than I have been in the past. It should be a bit easier now that it's at my home. Thanks again. Marc

[@PhilBender612]

Looks great so far, I only wish I had a 50 foot long run, lol I'm happy with my 8x14. But ya, awesome, I look forward to the updates.

[@marcsoscaletrains]

Thanks Phil, I'm actually a big proponent of smaller sized layouts. I feel they are not so overwhelming when folks come to see it. They can really focus on the work and detail and not the size. I just got a bit carried away. :)

[@ericwilliams2619]

Your layout is looking awesome 👍🏻✨️✨️✨️✨️✨️

[@elleryparsons2433]

Rock It Out Marc.

[@dozer69643]

Yesss I'm new to the hobby. Love your format. Do more videos!

[@bryanparr7274]

Great video Marc. I'm getting ready to build my second layout as well. Looking forward to your next layout update.

[@dantiel4179]

Hi Marc great benchwork for a massive layout always fun to see it from the start you could call it the OSB

[@ajmayowskijr]

50 feet is awesome. The layout looks amazing Marc.

[@marcsoscaletrains]

Thank you. Appreciate the comment.

[@TaylorsTrains]

Great start to your new layout adventure. I'm looking forward to seeing the future progress. Please keep the videos coming 😃

[@elleryparsons2433]

Nice Sized Layout I feel Ya My Advise Slow Passionately And Patience Don’t Rush it.Little By Little.Look It Over Think It over.

[@JeffBabitt]

Keep the updates coming! Love what you described as your plans. I am looking forward to seeing your layout progress.

[@70rrsteve51]

Looks great! I sure do hope you’ll keep the updates coming.

[@caseyvillemodelrailroad3877]

Great vidio, like the layout, lots of room for a hump yard .Thanks for the morning coffee

[@TwistedMacGyversTrains]

Awesome looking benchwork so far. I really like the overall size is perfect and the possibilities are endless. I will be watching if you do more video's. Thanks for sharing!

[@trainlover9943]

Great video update Marc! Your dad was telling me a little about this last time I saw him. I recently redid my layout with new benchwork and ross/gargraves, I couldn't be happier!

[@shafiqshabazz2462]

WOW 50 feet?..... man I want to see your first run.. I also subscribed

[@marklegendre4965]

Love the video and great start on the layout cant wait to see future progress

[@marcsoscaletrains]

Thanks Mark.

[@Mojoman57]

I'm in. Let's go!

[@raysrails2164]

That's a great size , good luck in the future !

[@marcsoscaletrains]

Thanks Ray! Appreciate you stopping by.

[@petebeggs757]

Want to see your layout evolve as I too am building my layout. So, more videos please.

[@williamlee1429]

This is going to be a fabulous lay out. I would like to ask you to consider one thing as you progress along that almost every KZbin, and layout creator dismisses. There are a couple of us that are really interested in how the transformer lay out panel is equipped. We don’t think about it, but we spend a lot of time looking at our transformers And our switch controllers and all of the things that it takes to make the layout great. If you go to any KZbin video, you may never see how the layout is powered whether you use new equipment or old equipment or a combination, layout panels, how they are laid out, where they are laid out, is actually pretty interesting. It may not be a focus of one of your videos, but I would like to see you include it for those few of us that are interested. Thanks, and keep up the great work.

[@marcsoscaletrains]

I certainly will. I'll show what my plans are and the changes I make as I move along. Thanks for the great suggestion.

[@alcoc4201]

Layout start looks great. Wish I had enough room for a 50 ft run! I agree with you on track choice, I too purchased a lot of atlas when it came out years ago but yeah, it's expensive. While the tie size is more prototypical the rail heads are too wide making it look almost like narrow gauge. But it was the flex track that really changed my choice to GG. Man it was tough to flex. GG, so much easier to flex (and cut). Thanks for the video, I found it very interesting, hope you'll provide some updates.

[@marcsoscaletrains]

Thanks for the comment. Much appreciated.

[@OGRDETROIT]

Please do updates, really want to see progress.

[@UncleMattstrains]

Looks like it's going to be an amazing space to build in

[@garybyrne2605]

Very nice. Thank you for the information. I'm about to start a new gauge platform, probably my last and hopefully largest.

[@jamesklosterman6619]

keep the videos coming Marc !!

[@dennydavis49107]

Enjoyed your video. Would love to watch your progress. 🙂

[@marcsoscaletrains]

Thanks Denny.

[@peterg321]

H Marc, could you include a few photos of the track plan that you have in mind? So far its all looking good but I'd like to visualise what is in store for the layout. Pete from Sydney, Australia

[@RABSTRAINS]

AWESOME SPACE! I also have a channel. Glad I found you 👍 WOW, 50 Feet!👍👍🔥🔥Please keep your videos coming!

[@marcsoscaletrains]

Thanks. Lots of great channels out there regarding O scale trains. I'm really glad to see how many have been popping up. I'm going to stop by your channel and check out your vids. Thanks again!

[@RABSTRAINS]

@@marcsoscaletrainsI have a basic layout with some live train action thrown in. I also do no editing. I will watch your postings, like where you are headed.

[@chrisricciardi1566]

Yes, please...keep posting! I'm still debating Atlas vs. Gargraves for my eventual layout...

[@georgebenson6036]

I would be interested to see your progress also. Looks like you are off to a good start.

[@marcsoscaletrains]

Thanks George.

[@jimmelchin1531]

Marc...new subscriber here from Maine. I find your videos informative. Keep'em rolling please. A question on plywood... I'm putting together a 16' x 8' layout. Four sheets of plywood placed but not permanently attached on four 8' tables. Therefore I'm looking for plywood that won't warp and remain level. Would OSB be suffice or do you recommend something more solid ? I'm strictly conventional, four loops, four Z1000 transformers for now. Thank you for your advice. 👍

[@marcsoscaletrains]

I think it depends on your location, humidity etc. Plywood would probably be best in your case as it is pretty dense and if it's lying flat it shouldn't warp. It would be best to screw it down just to make certain it doesn't, but I'd wait and see. You can always throw some screws down if it does start to warp, but I don't think it will. Appreciate the comment.

[@jimmelchin1531]

@@marcsoscaletrains Thanks...its in the basement with a dehumidifier if need be. I appreciate your reply. 👍

[@marcsoscaletrains]

@@jimmelchin1531 Perfect. I think you'll be fine. Enjoy!

[@josephmassell9922]

Big layout. Looks good have fun buddy

[@marcsoscaletrains]

Thanks 👍

[@elleryparsons2433]

Stay Single Level it’s Gonna Look Better.the Layout Will Be Better One Way Or Another.

[@bobdutka1176]

We do have a lot of O gauge content coming on line, just not many layouts starting from scratch. Keep the vids coming it is informative and great to witness. TX

[@davidmaines8093]

Do a lift out section to access the middle area. I did 4 on my layout to make my way through entire layout

[@marcsoscaletrains]

Great suggestion. That did cross my mind and I may need to revisit that idea.

[@ericwilliams2619]

I also subscribed to your channel 👍🏻✨️✨️✨️✨️✨️

[@rjshier9188]

Subscribed and looking forward to more videos. I was wondering what you're using for roadbed? Can you give details on the cut saw. If you could include a shot of the underneath bench work in the next video, that'd be great. I'm just starting on my 3rd layout. It will be 10'x24'. I'm using Gargraves track, and ross switches. I have 3/4 inch plywood for most of the table top (it is all from last layout). I used Homasote on my first layout and debating on using it on current build.

[@marcsoscaletrains]

Hi @rjshier9188, certainly will. I'll upload another video in the next day or two on the roadbed saw and underneath the bench. Thanks for the comment and for stopping by. Much appreciate.

[@jamesscalf712]

Please keep posting I can't wait to see what happens with the layout, I'm ready lolol thank you love you video's

[@marcsoscaletrains]

Thanks for stopping by. Appreciate the awesome comment.

[@escape150]

Wow, that’s a big layout. It will be really nice when your done. I wish I had a big cellar for a big layout.. mine is miniature 6x9

[@marcsoscaletrains]

Thanks Ron. I Still enjoy all of your videos.

[@driverman8615]

Trains/planes and cars LOL looks like my basement.

[@michaelmiller6692]

You mentioned that at the end about MTH systems are they coming out with a new operating system?

[@marcsoscaletrains]

It's just their newest version with the WiFi combined into the TIU.

[@michaelmiller6692]

@marcsoscaletrains ok thanks for a moment their I was like Whaaaaat!? , thought I was missing out on something way new

[@chuggsville]

This is awesome. What a layout. I have a question. I have new model train channel. Can anyone tell me is it better to list my videos 'kids friendly" or not?

[@marcsoscaletrains]

I avoid marking it kid friendly. It’s just too risky for the youtube internet police to hit your channel if they hear something they consider not kid friendly. That could be something as simple as you saying the word stupid or dang it! Yeah it’s that bad.

[@chuggsville]

@@marcsoscaletrains Thank you for the help. I guess I also make my videos for everyone to watch and hopefully enjoy the trains as much as I do.

[@TheNorthwestWind]

so jealous of your space!!!!

[@stevedrake360]

Great job! What is the thickness of the OSB?

[@marcsoscaletrains]

Half inch.

[@stevedrake360]

@@marcsoscaletrains Thanks much!

[@elleryparsons2433]

This Is How You keep Busy.

[@Conrail50]

Nice start Marc. Sometimes simple is better, it just depends what you want. This link will take you to a drop gate that may be of interest to you. There is another video in the same group that has a video of a counter balance bridge. Looking forward to your next video. kzbin.info/www/bejne/Z5nEeImfhdqLeNE

[@marcsoscaletrains]

Thanks for sharing! I remember that video and watched it again. Great information and something I will certainly revisit when I'm ready.

[@FatJebusGaming]

Ho DCC is where it's at

[@ELWtrains]

Awesome 👍 your layout is huge I just rebuilt mine it's 26'x16 ' ,i agree with u on age and also your bench looks well built layout will look really cool when completed yes would love to see you filming progress ,I just subscribed to your channel looking forward to future videos 👍 Thanks for sharing,,, Eddie @elwtrains

[@marcsoscaletrains]

Thanks Eddie, appreciate you . Thanks for taking the time to comment.