NK01 / NK02 Tufting Gun - Maintenance, where to oil your tufting gun - Tuftinglove.com

  Рет қаралды 24,611

Tuftinglove

Tuftinglove

3 жыл бұрын

This is our maintenance tutorial on how to oil your NK01 /NK02 Tufting Gun.
Find this and many more tutorials on our helpdesk:
www.tuftinglove.com/helpcente...
Check out our shop: www.tuftinglove.com
Learn more in our Tuftipedia Helpcenter: www.tuftinglove.com/helpcenter
Visit us on Instagram: / tuftinglove

Пікірлер: 37
@ChrystalChristie
@ChrystalChristie 2 жыл бұрын
ur videos saved my life! thank you!!
@perroenzangrentado9692
@perroenzangrentado9692 8 ай бұрын
I use gun oil, lucas gun oil to be exact, and it works super smooth
@msbsn2012
@msbsn2012 2 жыл бұрын
Thank you for taking the time to make this!!!
@Tuftinglove
@Tuftinglove 2 жыл бұрын
Thank you! Great to hear tufters out there like it :)
@vibrantfiredesigns3419
@vibrantfiredesigns3419 2 жыл бұрын
Very helpful!
@user-gj5fd6mr7x
@user-gj5fd6mr7x 3 жыл бұрын
THANKS! this was very helpful. I was concerned about the lube part but this makes things very clear
@Tuftinglove
@Tuftinglove 3 жыл бұрын
Glad we could help! :)
@AmandaDragmire
@AmandaDragmire 4 ай бұрын
noted. Inhave been and will continue to use my favorite firearm lube.
@Thotramen
@Thotramen 8 ай бұрын
Dang I apparently bought the wrong lube then! Thanks for saving my gun. :)
@buzzbella
@buzzbella Жыл бұрын
thank u :)
@lilychak199812
@lilychak199812 Жыл бұрын
can i use wd40?
@andreekelman3017
@andreekelman3017 2 жыл бұрын
What about the bearings at the ends of the top and bottom adjustable shafts?
@Tuftinglove
@Tuftinglove 2 жыл бұрын
You should not need to lubricate these. We haven't recognised any wear on these. However if you maybe did not clean the gun after each use, finer might get stuck there and produce some friction. Then of course you can give it a small drop.
@Jerom_world
@Jerom_world 2 жыл бұрын
That’s short easy very fast simple
@lucieduplessis71
@lucieduplessis71 2 жыл бұрын
Gruezi, kann ich auch Schermaschienenöl nehmen? Es ist ebenfalls fürs besseres gleiten gedacht. Oder kannst Du bitte einen Link zu dem Öl hier posten? Vielen Dank
@Tuftinglove
@Tuftinglove 2 жыл бұрын
Hey Lucie, ja genau, das ist super! wir arbeiten auch an einem Produkt für den Shop :)
@sergiosanchez561
@sergiosanchez561 2 жыл бұрын
Does the speed of the gun effect detail
@Tuftinglove
@Tuftinglove 2 жыл бұрын
no, it's more the speed of us tufters :) If you are fast enough to react to the speed of the gun there is no effect on detail.
@mollylydiate9716
@mollylydiate9716 2 жыл бұрын
Is it ok to use just wd40? Because all the knitting machine oil I see says it’s sewing machine oil? Thanks
@k1ngmetro__jo378
@k1ngmetro__jo378 Жыл бұрын
Wondering the same thing. Can you let me know if you run into any information please?!
@heidia.9602
@heidia.9602 2 жыл бұрын
Is WD-40 good to use as well?
@Tuftinglove
@Tuftinglove 2 жыл бұрын
Yes! Absolutely
@mariella069
@mariella069 2 жыл бұрын
Would WD-40 be a good lubricant use?
@mozzzietv8307
@mozzzietv8307 2 жыл бұрын
WD 40 is not a lubricant, don’t use it.
@niazigi136
@niazigi136 2 жыл бұрын
How many hours a day can you use a tafting gun, so that it does not spoil quickly?
@Tuftinglove
@Tuftinglove 2 жыл бұрын
I've never had problems with it get ''hot'' or something and I often tuft the whole day. the important thing is that you have the settings correct and it runs smoothly and you maintain it properly.
@debispanholl
@debispanholl 2 жыл бұрын
Hey! Where did u buy this oel?
@Tuftinglove
@Tuftinglove 2 жыл бұрын
We are working on bringing it to the shop soon :)
@blendishabani3556
@blendishabani3556 10 ай бұрын
but the screws should be maintained properly,plz???
@Josh-pz6kl
@Josh-pz6kl 2 жыл бұрын
I recently purchased my tufting gun and in the middle of a project the gun starts beeping. Is there anything I may be doing wrong?
@Tuftinglove
@Tuftinglove 2 жыл бұрын
Hey Joshua, Either something got stuck somewhere (turn it off, move it by hand and free the stuck part) or you did not maintain your machine properly. Always clean after use and lubricate the rails with the white moving block every now and then. The beep comes from the motor that is not able to move anymore.
@Josh-pz6kl
@Josh-pz6kl 2 жыл бұрын
@@Tuftinglove thank you! What type of lubricant do you suggest using ?
@Tuftinglove
@Tuftinglove 2 жыл бұрын
@@Josh-pz6kl Anything that is making things flow better/ actual lubricant. Don't use sewiwgmachine oil, since this is made for the small gears to grips better into each other. And we want exactly the opposite of that.
@hartin222
@hartin222 Ай бұрын
@@Tuftinglove I used sewing machine oil and it wasn't tufting very good. tufting quality went down big time. I took the machine apart and cleaned it all and now going to use wd 40 after watching your video. hopefully that will make it work better. thank you for such an informative video!
@jamalvinily575
@jamalvinily575 Жыл бұрын
name the oil plz
@Tuftinglove
@Tuftinglove Жыл бұрын
It is our Tuftingmachine oil. You can find it here: www.tuftinglove.com/Tufting-Machine-Oil/ART1194
How to change your scissors on your genuine AK-I Tufting Machine
39:21
All Things EFFY
Рет қаралды 1,5 М.
顔面水槽がブサイク過ぎるwwwww
00:58
はじめしゃちょー(hajime)
Рет қаралды 105 МЛН
How To Choose Ramen Date Night 🍜
00:58
Jojo Sim
Рет қаралды 55 МЛН
How to Clean Your Rug Gun | Maintenance
3:47
EUPHORIC
Рет қаралды 3,6 М.
First time tufting - A beginner's guide with Tuftinglove
37:08
Tuftinglove
Рет қаралды 19 М.
EASY WAY - Change your Scissor on your AK-1 Cut Pile tufting gun
6:32
16 Amazing woodworking hacks
20:53
JSK Projects
Рет қаралды 109 М.
How to Tuft a Rug | A Step by Step Guide
38:30
Chrystal Christie
Рет қаралды 273 М.
How to clean and oil your tufting gun 🔫
11:40
The Rug Maker Co
Рет қаралды 7 М.
Making MUSIC with RANDOM THINGS 🎵
0:24
LosWagners ENG
Рет қаралды 7 МЛН
Rate the flight of our shoes at the end ✈️👠 🤣 0-100
0:15
YANA CHIRKINA
Рет қаралды 15 МЛН
СТРИЖКА ЗА 10 000$😱 #истории #стиль #стрижка
0:45
АРХИВ ИСТОРИЙ
Рет қаралды 16 МЛН
Tom 🍓 Jerry (Rithvi&Kavi)Real End Twist 😂🎈 #shorts
1:00
KL BRO Biju Rithvik
Рет қаралды 80 МЛН