No Code DIY Screen Backlight | 10$ Setup | ESP32 WLED | SignalRGB

[@krishkumar7201]

It actually worked for me , thank you so much

[@randomstuffwemake]

@@krishkumar7201 Always welcome. Please subscribe to the channel and share with your friends too.

[@TanjidulAbsar]

Do i have to use external power source? Because i am using ws2812b and its 30pixels per meter and i will use 4 meter so it would be 120 LEDs so how much supply do i need? Also i want to use this software using my phone on my tv can i do that?

[@randomstuffwemake]

You can use 5V 2A supply if needed. For phone, WLED app will work.

[@MYVILLAGEBOYS1677]

How to connect the tv to this one

[@randomstuffwemake]

Currently there is no easy method for TVs, but we are working for one. We will update a new video on our channel as soon as we make it. Please subscribe to our channel for future updates.

[@jasbindarsingh1640]

Hey, great video and I am interested in buying the kit although one question, would it work if watching KZbin and other OTTs like Netflix, Amazon Prime, etc on PC?

[@randomstuffwemake]

Hi, thanks for the appreciation. For your question the answer is No. The content you are talking about is DRM protected. Hence the screen capture features doesn't work on any of these platforms. There are better devices which works using a top mounted camera which can work on these platforms. Those devices usually cost around 15k and above.

[@randomstuffwemake]

In case you want to purchase one of our kit - The link is in video description. You can also reach out to us at [e-mail]

[@amykannu]

how do you need to do it for a TV ? Is it possible?

[@Ch3tansp]

great project, can we do it with any other rgb software which supports linux/mac?

[@randomstuffwemake]

Yes, you can. WLED is supported on MAC & Linux. As for the Screen Capture use this: artemis-rgb.com/

[@Ch3tansp]

thanks

[@eira1452]

Can u share the Connection diagram

[@_mr_unique_]

Hey can a get the schematic of the esp32 circut board so tht i can make it myself, buying the pcb is getting a little bit expensive for me (i'm not an electronic guy by profession)

[@randomstuffwemake]

You don't need any PCB for this project. You can use the ESP32 controller. And directly connect the LED to the GPIOs. Otherwise you can follow the link in the description. I'll add a schematic diagram today in the same repo. Thanks.

[@_mr_unique_]

@@randomstuffwemake Ooh ok thanks broo, and can u also mention the electronic components which is been used in this project along with the schematic it will be very helpful for a rookie like me thanks again mate.

[@Edo.]

@@_mr_unique_ look up Chris Maher, he has good tutorials on this

[@the.droetker]

They are like 99 cents on aliexpress. Why bother making them on your own?

[@_mr_unique_]

@@the.droetker I'm from India and AliExpress is banned here so

[@simonefaccendo]

Can I use the esp32 C3? Or necessarily C6

[@randomstuffwemake]

You can use any ESP module (ESP8266, C3, ESP32, S3, C6, xiao boards etc.)

[@simonefaccendo]

Thank you​@@randomstuffwemake

[@PallabandTiger]

Awesome project

[@virendrasinghrathore5900]

Total cost and links pls

[@randomstuffwemake]

rzp.io/rzp/IQp4KrpR The kit will be delivered with 7 days. (Note: This only works with computer screens, not directly with TV)

[@sojocjohny]

Nice, but can we do this on a smart TV

[@randomstuffwemake]

Thanks Johny, Unfortunately this currently works with PCs & Laptops only. We are working on a version for TVs as well. Do subscribe for the upcoming videos.

[@harshilsaxenaa]

Just use hyperhdr much better for smart tv

[@rhdchannelgaming]

for Xbox?​@@randomstuffwemake

[@wreckronomic6663]

@@harshilsaxenaa Except it's not as it only accepts external signals from HDMI and will not recieve any signal from the TV apps

[@LooK253]

@@wreckronomic6663 Really? How come I have it on my rooted LG C3 running Piccap that captures whole screen and can add every light that HyperHDR supports ;)

[@DarkSquadYT]

1st step- Get a 3D printer wow so affordable

[@Bruzzelbirne]

little sarcasm? ;) You won´t need a 3D printer to achieve the result. Take a matchbox or something similar and put the ESP inside :)

[@twicestan4life]

can you do this with glow worm luciferin and firefly luciferin please, there's not a single video on the internet

[@randomstuffwemake]

Sure, we will try it once.

[@shamadavthermalpanipat8184]

👍👍

[@wowyummyyy]

L I K E 👍 👍👍👍👍😻😻😻😻😻💯💢💯💢💯💯

[@MarcoCarvalho1]

You can ditch the anoying music

[@randomstuffwemake]

Thanks, Will try to Better it.