No four wheel drive.

Working on a 8200 john deere with a no 4wd complaint.

[@juniorutah6066]

thanks warren 👍video as always . thanks for the sunday live also good to catch up on the peterbilt

[@johnmcgreevy742]

Great video Warren Weiner dogs look alittle sad today lol. " When you eliminate all the other possibilities, only the truth (or in this case the real problem) remains". Thanks for the video!

[@w056007568]

Having found this obvious damage in the hub do you have any concerns about, what to me, appeared to be really glittery oil that you drained from the Front diff? Also what about the condition and oil in the right front wheel?

[@fireantsarestrange]

4 am... im on it ... keep em comin brother.

[@scottwilke3966]

Hey warren i salute you sir you are incredible simpley the best i dont know how you do it ? And by your self ! These 55 series mechenical 4 w drive and computers technology just coming out when i changed careers ? Amazing to where it went what it takes to fix em i dont kno how you do it 7 days a week not enough time during harvest but you get it done ? You casually say split it in half like no big deal ? Remarkable ! Sad sad day when you hang up your wrenche thank ypu for the education ? I would like to take a ride and visit you if i can find you ??

[@rogerjohnson6218]

..Looks are not good.. ? now are you going to do the right side...:-) .if the left is bad...the right is to...

[@ainsleyhenderson4228]

Good vid,Hope your well Sir,not to expensive a repair,So scary these days,the price of parts,my lord you have to sell a kidney lol,You manage a sig night off at the range,take care stay safe.GBY,and the family,from the formally known Great Britain.( once). Lol.

[@michaelcarlson1528]

Sure bet your glad you rechecked before splitting the tractor! Thank you for sharing mate!

[@scrotiemcbogerballs8286]

Great job buddy on figuring out what was wrong I think you are right about spinning and the front caught traction and POW broke it

[@jcolivera881]

Warren, I’ve been following your videos for about a year now and let me tell you that you are definitely teaching a young guy in the business a lot thank you for going out of your way to record these type of repairs.

[@wade7379]

This guy is alright in my book and he's trustworthy

[@juanpabloramosmienok7804]

Hey man did you do any schooling to be a heavy equipment mechanic? And do you think it helped you get where you are now? Thank you and awesome content sir👍

[@fordnut4914]

You don't need to go to school for it most is just common sense stuff.

[@ronchappel4812]

Well that was satisfying! It's a great day when a job gets easier and easier.

[@jimwesselman]

Warren, your diagnostic abilities are incredible! This is why I think your videos are great! Would be interesting to see you and JayPaydirt try to figure out his new Peterbilt and why it has low oil pressure? It was a California reject due to emissions non-compliance.

[@cassiuspuckett8789]

Abuse or like you were saying "spinning out of a hole and caught on solid ground or pavement. Hard to say for sure. Great video Warren!!!!

[@andrewread8370]

I like were they put the four wheel drive switch in the back Conner forget about it hit the pavement snap a axle

[@robertwhitehead5946]

Hey Warren, I know you get discouraged from time to time with some of the commentors but please don't give up. I love your stuff and this was a great video.

[@rowanlidbury]

Agreed. He seems to have got his MoJo back.

[@ryanhogan6509]

Wheel hop when your pulling something stuck in mud, the tractor on good ground getting some wheel hop with those nice tires with load the shit out of the entire drive line..

[@davidj4662]

Nice troubleshooting logic, took you right to the broken shaft. That's awesome.

[@rowanlidbury]

Just when you think you've seen it all, something will crop up that's unexpected. I do electronics repair, but these videos help me. It's not the application, but that logical troubleshooting process that Warren does so well.

[@ryanjohnson4320]

Your customers really are the lucky ones. You're very very good with all brands and projects. There's no way any dealer would go as "above and beyond" as you do. Great video, and I'm really happy you're continuing to make them!

[@jimcivitello3913]

That jd is in great shape for a 20+year old machine.hats off to the owner and operators for taking care of it.

[@thomasstewart9368]

Excellant video. Audio was perfect - diagnosis procedure was "spot on". You got-er torn down without much trouble - I understood everything you said. 👍

[@nickpersenaire4443]

Thanks for sharing the daily grind. Keep up the great work bud 👍 . Abuse he says but abuse is what keeps Warren busy.

[@disturbedcarrot]

My goodness, that thing looks immaculate for its age.

[@mfreund15448]

Deere made the 8200 from 95 to 99. It is at least 22 years old.

[@disturbedcarrot]

@@mfreund15448 a credit to the owner

[@connorvelthuis2221]

This guy’s a 97,98 or 99, as it has the 10 style decals compared to the darker ones with the black stripe. Still a clean looking machine

[@albertogarcia5276]

The best series that john deere has ever made in my opinion

[@disturbedcarrot]

@@albertogarcia5276 yeah, the 00 or a 10 series were great. The 40 and 50 series were fine machines too

[@nato4720]

Good Disclaimer in the end haha love your vids! Keep em coming

[@fireantsarestrange]

Well ive spun a drive line a few times but when i was doing it .... rock crawling. Yea .... i abused it. But I did that full well of knowing what was going to happen.

[@trevormansfield6495]

Great having that live chat on sunday.

[@michaelmcclure8673]

Warren , I see the old ford has it's rear wheels back on, what's left to finish that? 🤔

[@gregbird6615]

I chose my Kubota because that’s whose in the area and closer by. I like my old internationals though

[@ericlindal8008]

Awesome video. Thanks for posting.

[@trevormansfield6740]

Hi Warren. Did you have time to video that duramax going back together??

[@maxstahl6624]

Hi there I been seeing your website for a while now and I have one ? What happened to your helper and or ,, western

[@johnwaby4321]

It's a good job that you stopped to have a think .👍 it saved you a lot of less work to do 👍👍👍👍

[@Rx7man]

I'm wondering how the shaft on the other axle looks.. torque on both of them should always be equal.. maybe it's got a bit of a twist to it too and hasn't let go yet or the one that broke wasn't tempered properly?

[@brianrutherford3229]

You lost voice in the last minute or so.the first we heard you was saying it might not have been abuse.all before that till you were talking about the parts in dead air.

[@jonathanhageman150]

I bet u were relieved that you didn't have to split another tractor.

[@saidzaroual2344]

Welcome brother how is it right thank you for this useful information brother has a problem In a tractor. Jhon deer7515 In transmission -Otomatici Number four. What's the solution, please?

[@conradward2945]

Crackin video Warren..Easy fix i'd say...

[@canuckyank82]

A great video. Great step by step analysis. Thanks Warren.

[@Papajur]

Man it's good you checked before splitting the tractor 🚜 this is a way different problem then you thought. Great investigation 😁 Greets from Jur

[@Wolfhound.]

makes me wonder if the other side should be checked for twisting

[@rickytart1028]

much enjoyed...Thanks Warren...

[@nickpersenaire4443]

Looking forward to part 2 of this one for sure.

[@cesargallo7424]

Damn, this shaft must have been abused hard. I would supposed that clutch packs will go off first

[@mikeduffy7271]

Love your Videos and work ethic. I organized my truck last week because I see how well set up yours is.

[@mfreund15448]

Great job Warren. I love how you use reason and knowledge to diagnose the problem even it it is not what you thought 10 minutes ago.

[@greglammers9905]

Nice find. Love the videos. There is nothing more satisfying as a mechanic as finding the problem.

[@jonka1]

Warren would it be a good idea to check the stub shaft on the other side? It surely was involved in whatever happened.

[@garyfeltus9801]

Wow what a chunk of still to twist off. Amazing the power on those things. Great video as always.

[@zuestoots5176]

Good bounce under load can break stuff like that

[@tordlingvall899]

Must been a realy heavy load on that driveshaft to broke it. Maybe some weeknes in the matrial in that shaft. But hit the ground with spinning wheel on this heavy tractor could do this. Have a good day Warren, always nice to look ar your videos.

[@dandodds3681]

Hey Warren, the quad in the back ground is that abuse, lol. Good to see more videos.

[@onemessedupfarmer]

Like you said might want to check that it is modulating or the accumulator is working. Thanks.for the video bud!! Shop is looking pretty full!

[@dougdegraff5892]

That stub shaft being twisted that bad would in my book warrant an inspection of the other side it could have been stressed as well.. great job Warren..

[@davidholder3207]

Agree Doug. You could see the amount of torque that had cracked the shaft from the twist in the spline when Warren removed it. Such a short axle would need a huge amount of torque to twist and break so that suggests metal fatigue. You'd hope John Deere will take the broken shaft and examine it to establish a reason for the failure, and supply a replacement free!

[@mfreund15448]

@@davidholder3207 The 8200 was made from 1995 to 1999. Tractor is at least 22 years old. How long should Deere be responsible for shafts!?!?! To me he has gotten good life out of that. Try to get warranty on a 22 yo car or truck cv shaft.

[@davidholder3207]

@@mfreund15448 As a manufacturer I'd be interested to know why that large steel shaft broke, after 22 years or not.

[@oldbones3092]

@@davidholder3207 You'd be broke, too. Those 8000 series tractors are pretty much bullet proof. They eventually break down. In the grand scheme of things, this is a small potatoes break down.

[@kerrygleeson4409]

Great work as always Warren 🇦🇺🇦🇺

[@JD-zm4eh]

Power braking at the truck and tractor show, or weak metals joined in critical places, who knows. You finding the problem is commendable, some people would replace parts before discovering problems.

[@juddsonafelt8779]

Not this video related but, how did the J.D. machine you bought as a rental last year working?

[@Mr549er]

much love brother ,,,salty army

[@reginaldpatterson5342]

Shouldn't the shaft spin freely in 2wd and not turn in 4wd....I thought it was the other way around

[@alexisdeville3605]

Where did the all the metal particles In the front differential come from??? BTW great diagnosis?

[@DirectCurrent4u]

That Operator knew exactly what happen with that axle snapped! He Just didn't want to tell anyone!!! lol🤔🤣

[@joeclarke9782]

"Get off there like I said." There is more power in our words than we realize. Good vid.

[@pmccoy8924]

Thats a hell of a lot of torque to twist that shaft like a twizzler.

[@scruffy6151]

Keep up the good work.

[@davidcraven277]

Out at the airport we see this every winter they get all wheels spinning one grabs and boom happens every time

[@nathanburgess4928]

👍 one hell of a bang either way!

[@charlesfrascona2073]

Wtf man, does anything ever get you worried or nervous. The way you you just rip into thing amazes me. I need to do a clutch in 680 dtc Long has got me in knots.

[@zuestoots5176]

Just rip shit off untill you get to where you need to be.

[@bobkyllo578]

What ever happen to that big John Deere 2 track that hashed the motor? Last I remember you had it torn apart.

[@RetroGamingWithHopper]

I'm wondering what the other side looks like.

[@MrMitchellw16]

Thanks for the vidya, keep up the warin' Warren

[@weldingman57]

Me screaming at the laptop. It has steering. It has a u-joint. Fixed a bunch of 4 wheel steer forklifts. This is before you started to pull the steering

[@junkpile4106]

Uh oh, the Kubota garden tractor owners are gonna be butt hurt.

[@Romuls753]

Anyone else lose sound at the end of the vid?

[@martinharper5112]

JD exchanges the axles instead taking the axles down. Throw away world.

[@Gustav4]

remember to put new oil back in the front axle lol

[@vernt4583]

Thanks for taking us along Warren!!

[@johnsawyer2516]

Hi to everyone who watches this channel. Can anyone tell me what is the electronic box mounted on the hub.

[@deanmills5106]

I understand now, it's not your skill that helps you accomplish the tasks it's how you talk to it.

[@jamescassidy1298]

spinning out and hitting a solid spot

[@tomappleyard6157]

That's sum set up 4x4 came along ways sins the 80s man.

[@fastst1]

Jeepers, the way you started I was thinking there was going to be a pop quiz at the end! :)

[@badasswood]

Hey, great videos, we have a 510b jd with cracked differential. Any way I could chat with you or email you with some questions? It's no hurry,but it's gonna be a big project fir a few guys without a real shop... sourcing parts is our biggest issue fir now, just starting to get into it. Thanks, great info you had on the 310!

[@Peter-V_00]

Saw this a few times (on 580 backhoes) when I was a Case tech, people would leave the transfer case engaged on pavement and turning the steering to the lock, it would take a while to happen but rental equipment will always find those people that can ruin a ball bearing with a rubber hammer. As just an observation, I was looking around your shop during various frames when it dawned on me just how much you have invested in your operation, your trucks, tools and support equipment dollar wise is a bit staggering, all mechanics of course share an investment in themselves but I just was overwhelmed by just how much you have invested, let alone your seeming endless energy and ambition to do the job right.

[@cr-lh2bd]

What brand and model air hammer are you using? Thanks for the time you spend doing these videos, they have helped us in our farms shop.

[@redbovine]

If I remember correctly the final drives and the front diff use hyguard fluid and should be replaced at 1500 hrs. I doubt many people change it.

[@j.b.caldwell7420]

Warren I think you missed a clue, Did they replace the front rubber and then later replace the rear rubber ? New fronts and old worn rears can have the front doing 95% of the work and they found the weakest link in the drive system

[@ihguy2113]

Warren how do you like working that ventage of deere over the magum tractors

[@milwsdl39]

Awesome job as always thank you for the video

[@chevypu35]

the old silver metallic gear oil saga

[@rgj5832]

That service truck crane is so awesome!!!!!!!!!!!!!!!

[@Robert-zn9ub]

Warren, Good call on Not mixing Antifreeze. Tends to turn acidic and Gel up plugging coolant passages and wrecking havoc on the cooling system and water pump seals

[@seantatham9960]

Excellent troubleshooting per usual!👍🇺🇸💪

[@duggandh]

Warren, Interesting to know what the parts cost.

[@StephenEToner]

Easy fix good job.

[@marekzamora]

Great video. Just curious how much something like this you would charge and your overall opinion on john deere tractors.

[@jamesal0]

leaving it in 4x4 on hard pavement for a few miles

[@AmosMosesJr]

Careful with those Pittsburgh jack stands when you're hammering. They were recalled for falling on people. Harbor freight will refund you. I would hate to see you lose a foot. I've had a few close calls myself.

[@heavymachinery2843]

The man the myth the legend and the broken tractor keep on wrenchin 👍🛠

[@drfox4423]

Ok. It's a Tie rod end not a little eyelet thing. And the shaft comes out from the other side once you unbolt you CV joint just in behind. Then you pull it from underneath. All I see it your just beating the coalers to fuck. Keep going tho. Good job lmao

[@ourv9603]

RE : PETERBILT Did you know all truckers go to heaven? It's true. When they arrive @ the pearly gates, They are given a brand new St Peterbilt. What does Satan drive? An Anti Chrysler. !

[@JeffreyStrader]

What the hells that hairy Wookiee at the top of my screen??

[@wade7379]

Hahahaha talking about splitting this John Deere it's easy he says lol not for me lol this guy's is one of the best and trustworthy mechanics I've ever seen. Where's your 4 legged kids?