The problem with bandsaw boxes is the gap around the drawer. It's not a problem anymore.
Пікірлер: 55
@germcrazyshokoff3623Ай бұрын
Brilliant. The gaps are the main thing that frustrates me about bandsaw boxes. Nice work.
@MartinMurrayWoodDesignАй бұрын
I agree, the gaps make them look unfinished. I'm sure there is a better way to be found yet.
@bobross558011 ай бұрын
Very informative an super easy watch. I find your personality adds so much to this craft! Thank you!
@MartinMurrayWoodDesign11 ай бұрын
That's very kind of you to say. Thank you
@Shipslaw6 ай бұрын
Very informative and inspirational. I find the narration delightful, great to listen to.
@MartinMurrayWoodDesign6 ай бұрын
Thank you very much. 👍
@robandsharonseddon-smith521610 ай бұрын
With that drill press trick, you win the internet for weirdest sanding technique ever...
@MartinMurrayWoodDesign10 ай бұрын
😂 check out how I used it in this video kzbin.info/www/bejne/gZeulKd-jpyqhrMsi=L0fWBnPEvmwhrud8
@Brett440 Жыл бұрын
Love this kind of stuff I've watched a lot of your videos lately. Looking forward to seeing more of your original content.
@MartinMurrayWoodDesign Жыл бұрын
Nice one I appreciate that. Making stuff and figuring things out is fun isn't it?
@Brett440 Жыл бұрын
@@MartinMurrayWoodDesign absolutely. Love spending my spare time just seeing what can be done with bits n bats.
@puddinggeek4623 Жыл бұрын
Excellent video. Very informative, I will be trying this method on my next bandsaw box. Keep up the good work.
@MartinMurrayWoodDesign Жыл бұрын
Thank you. Good luck with your bandsaw box. 👍
@hisa888yam2 ай бұрын
nice, I’ll tray. Thank you.
@MartinMurrayWoodDesign2 ай бұрын
👍
@steveo30129 ай бұрын
I'm not a fan of plywood, but your personality got a subscribe hah! Now, off to snoop through your posts to see what other cool stuff I can find
@MartinMurrayWoodDesign9 ай бұрын
Thanks Steveo, I strongly recommend all of my other videos. 👍
@philipwilliams8114 Жыл бұрын
Another above average vid. Keep them coming 👍 well above average. Bloody superb in fact.
@MartinMurrayWoodDesign Жыл бұрын
Thank you very much.🙌🙌🙌
@jeffw8611 Жыл бұрын
Another enjoyable vid, thanks 👌
@MartinMurrayWoodDesign Жыл бұрын
No thank you 🙌
@kellyteasdale8252 Жыл бұрын
Great informative video!
@MartinMurrayWoodDesign Жыл бұрын
Thanks Kelly. Shame I didn't have any quarter sawn oak.
@kellyteasdale8252 Жыл бұрын
@@MartinMurrayWoodDesign i love the way you explain why the gap is there. I have been watching your other vids too.
@janklaas3242 Жыл бұрын
This is why I watch youtube you sir have a new subscriber!
@MartinMurrayWoodDesign Жыл бұрын
Thanks glad to have you 👏
@WoodenItBeNice Жыл бұрын
Very clever Martin. Take care. Cheers, Huw
@MartinMurrayWoodDesign Жыл бұрын
You sweet talker, you are always welcome here. 🙌
@WoodenItBeNice Жыл бұрын
@@MartinMurrayWoodDesign 🤣🤣
@dan.w.hoover255610 ай бұрын
Very cool!
@MartinMurrayWoodDesign10 ай бұрын
Thank you very much sir 👍
@jake_a_g Жыл бұрын
Neat. Could you do the 1st prototype strategy, but just a 5 or 10 degree angle?
@MartinMurrayWoodDesign Жыл бұрын
Don't tell anyone but I did try 5 and 15 degrees off camera. 5 degrees, the wedge dropped about 75% and 15 degrees dropped about 50%. 30 degrees seems to be the sweet spot as it only dropped about 2 or 3mm. But I'm happy to be proved wrong.
@steviebye1 Жыл бұрын
I enjoyed that.
@MartinMurrayWoodDesign Жыл бұрын
Cool
@wiseoldfool10 ай бұрын
I see where I was going wrong. I wasn't crossing my fingers!
@jeffcarr392 Жыл бұрын
Martin, excellent video, very funny, first time I've seen one of your videos, have dutifully subscribed, you're welcome. 😁😃
@MartinMurrayWoodDesign Жыл бұрын
Welcome aboard 👍
@ChrisFranklyn Жыл бұрын
I'm still not sure why cutting at an angle reduces the gap. But it's nice to see a man on a mission.
@MartinMurrayWoodDesign Жыл бұрын
I struggled to put it into words myself. 🤦♂️
@JohnColgan. Жыл бұрын
Because he can then recess the drawer in further to remove the gap. Then sand away the front of the outer shell to same depth of the drawer
@MartinMurrayWoodDesign Жыл бұрын
@@JohnColgan. 👏
@ChrisFranklyn Жыл бұрын
Thanks both!
@SahajSoldier Жыл бұрын
Because it creates a miter. The cut is now 45 degrees away from the back of the box. You can't see it, the drawer face overlaps a bit. Whereas before the cut was always 90 degrees from the back and you could see straight down the gap.
@BenNawrath9 ай бұрын
Very good idea! Question, and this is something I've always wondered about all band saw boxes. Do you find your gap is uneven because of the single entry kerf?
@MartinMurrayWoodDesign9 ай бұрын
The uneven gap in my opinion, is the worst part about bandsaw boxes. Hopefully someone will watch this video and come up with a better way. 🤞
@BenNawrath9 ай бұрын
@@MartinMurrayWoodDesign {I was thinking something like cut all the way thru on the entry cut, so the whole thing shifts down, not just one side.
@MartinMurrayWoodDesign9 ай бұрын
@@BenNawrath that would totally work, you would have two glue lines to hide but if that's ok with you then give it a try. 👍
@BenNawrath9 ай бұрын
@@MartinMurrayWoodDesign yeah depending on the grain pattern maybe it would even be easier 🤷🏻♂️
@jeremyjjbrown9 ай бұрын
Why not enter with the ply direction so yo can fill the saw gap and not notice?
@MartinMurrayWoodDesign9 ай бұрын
That sounds like a good idea. 👍
@brettevans4857 Жыл бұрын
The cheques in the post 👍
@MartinMurrayWoodDesign Жыл бұрын
Brett, your cheques keep bouncing. Can you use western union going forward. Thanks
@StileandRailWoodworking10 ай бұрын
I keep hearing "welcome back to the shit" at the beginning of the video