No Going Back Now... Our Duramax Drag Race Truck Is Taking Shape!!! 1st race prep!!!

[@doggonedk]

Justin is JH's Tye. Both of them brilliant fabricators. I could sit and watch either one of them work for hours.

[@MichaelBowen-mk6cg]

Great job AGIAN guys the projects are really coming together and justin is one hell of a worker and fabricator good job keep up the good work

[@thatdudeinorange5269]

Seeing JH jumping the fence at Cleetus impound yard it certainly looked like he was in decent shape! 😅

[@shoutout.kokain8713]

😆

[@fluffpantss]

From the very first jh video I saw, I figured he is someone I'd never want to fight off!

[@dadfirstalways3578]

My man gots the HOPS!

[@Arcturuseyes]

I feel some of the best racers are the best engineers, and you guys aren't fancy, but the engineering design and physics knowledge is very high, rock on

[@hagerhog118]

Sorry, talking in real time, watching the vid. This is frigging awesome fellers! Bedside game...on point!!

[@JMB676]

That blue and green on the mega frame looks so good. I’m always looking at it when it’s in background.

[@BenjySparky]

JH and Justin, y'all rock! Good luck in Kentucky. Peace

[@carsondefa250]

So glad your doing a duramax build.

[@codywade1030]

Whoever Justin learned his torch technique from is old school. Only other person I've seen do it like my iron worker pawpaw

[@chrisstaab8028]

That Cummins sounds absolutely beautiful good work fellas

[@Windemtight]

JH , that square body is so awesome, one bad ass truck.

[@Rskt4thbskt]

That square body give that new chevy a run that's for sure

[@mltgalaxy7777]

Coming along nicely... good shit y'all!

[@davidtappe5337]

Would like to see a collaboration with Deboss Garage.

[@a.hagler3777]

Hoosier Hills Performance Engineering (HHPE) is rooting for you guys 💪💪!! Give ‘er hell!! 💪💪

[@JMB676]

You 2 are a great team. JH likes to go WOT in everything it seems and Justin is there to reel you back in each time. Show is definitely leveling up.

[@jeremyjoyce8637]

Give respect where respect is do. Justin doing the work of five guys. 👍

[@libertylifestyles3806]

🎉❤U Boyz R Living Da'dream!!!

[@garyleary5379]

Wanna see this against Wyatt’s truck on boosted boys even though I have a feeling we all know what the outcome will be

[@bdd1469]

You spelled battery boys wrong.

[@Fixnstuff24]

@@bdd1469BRO 🤣🤣🤣

[@builtbyme]

The outcome will be they run in different classes. Wyatt runs 5.35 in the 1/8, JH will run in the 6.70s how it sits right now. He's got alot of work to do yet.

[@sethcrawford6219]

Wyatt gone win but it’s just a different level

[@shawnoswald833]

@@bdd1469I commented on his last cybertruck video told him he’s no longer boostedboiz it’s now teslaboiz 😂😂

[@L.O.C.1990]

shout out justin for bustin ass on the projects

[@kinghusalah408]

What can’t Justin do.. Love your videos JH 🤘🏼

[@HalfPint5811]

She's a unit!! 💪🤘🤘

[@metrickarma]

Anytime I see Justin without a trucker cap and sunglasses I go who is that?!? 🤣🤣 Keep it up, The Dukes of Justin are doing great

[@DACoutBack]

Those bed supports need some little gussets

[@christophero312]

Noticed you like them green bikes

[@itssogood69]

Grüße aus Deutschland 🙂 Beef Jerky ist Dogfood in Germany, no front. @Justin: keep Justin happy

[@karlwahlfield6462]

man that sounds mean! wipe that damn cluster off lol that 78 sure does drive nice!

[@DavidSmith-qk1hd]

I build transmissions for a living and use all the fancy high end billet parts. With that trans you will always have issues. They always break something under heavy power.

[@Rebar77_real]

Want to se JH in a bigger building? Buy more Merch! But hey, if you can't go out, can you go up? Loft storage would clear up some floorspace and declutter things. A 'tuber Mustie built an elevator out of an old standing forklift. Bolted it down in place with a permanent flatbed, type thing. It would lift quad bikes and blocks and whatnot with a cage around the flatbed for safety. Rainy day thought, cheers. 😎

[@jordanbass827]

Love theses guys!!

[@jeffhoward8198]

Fn badass boys listen Ole cleeter is awesome but yuns are living my dream...I'm in Kentucky where is this event

[@Michael666CA]

OBS Fiberglass bedsides weight more then factory skins. Even as heavy as shortbed squarebody bedside ( just skins) are, My fiberglass ones were still 8lbs heavier each side.

[@thesquirrel905]

Where do you get a Transcooler like that?? I need one of those on my 7.3.

[@drew5271]

Jh and Justin will you get all the Gauges working in the 78 then it will be completed

[@nathanwoten6236]

Hey JH instead of them 3m eraser wheels you can use a valve stem. Just chuck one up by the threads in a drill and use it like the eraser wheel they work pretty much just as good as a 3m eraser wheel.

[@a10warthog75]

Badass ripper 🔥

[@tracybrown8316]

Since your building a drag truck have you thought about lowering it

[@ErikTexas]

How about a Short bed conversion

[@Axial_Andrew]

Ahh yes, the '78 Drummonds...😎

[@Arcturuseyes]

Lol, sorry for the previous comment. Heh, to troll Cleet, make this a truck version of Leroy, race it a bit, then get a truck version of the fiber Eagle body, Cleet should get a sponsor for the fiber, should be fun!

[@howiefeltersnatcher]

Do you have to run factory frame if you 4 link it you might as well build a frame lower the stance coil over weld the cage to the frame and cut everything out of the cab round bar support for fenders and bed sides and everything else cutoff wheel and grinder diet light weight aluminum sheeting, and there’s your drag truck also make it a short bed

[@Dethmegadeth]

Let's go race😂 Man I could have swore that was DW.

[@DanielPrice-ny6ij]

Get with the on d gas boys when they come back in a few months. They have a line on carbon/fiberglass doors for those trucks Justin

[@Ridingthecushion]

Yeah the boys keep it up

[@serenityseeker239]

🇺🇸👍🏼😎👍🏼🇺🇸 Just bought a 86 square 58,000mi. from original owner. Love that rig bro 🤙🏼

[@singlestallfabrication1788]

Badass, also from a past truck racer, most guys don’t know you are supposed to have the transmission lines to cooler coming into the cooler from the top and not the bottom due to it bypassing half the cooler since it doesn’t have the ability to fill the cooler

[@Michael666CA]

Easier to push down hill then up.

[@rasta2788]

Gravity

[@Arcturuseyes]

Some cushions on the seat will be nice if there's need for comfort

[@alandavies4270]

Who care what the workshop looks like you do work on people motors and your own so I think you and your guys do a f..king good job so the best of luck with it all and bless your guys 👦

[@JohnRoberts71]

Great content thanks for sharing

[@concretejungle3414]

You and Clet need some new merchandise hit us with some dmax shiiiii JH spread your wings bra lol love that 78 brotha

[@christianshadrick1150]

CLEETUS

[@NCMATT]

RACE BOOSTED BOIS Wyatt. DAY2

[@travisweldmaster7815]

Justin, turn ur voltage up a hare and wire down, ur in short circuit transfer now spray and if you push ur puddle not drag ur welds won't be black with spool gun

[@jsdieselandauto3482]

I really like the hood latch

[@arranmorfeld1991]

!!!Move to Texas... No permit or require any for a shop... Same temp though its hot

[@hopperrivas6025]

Do some videos on what y’all work on in the shop

[@G-USA]

Must be a cold day in Florida for Justin to be wearing boots and pants lol

[@WildhurstLodge]

I had a compound 6.7 and my suncoast competition trans lasted 4 years of abuse, then I got a revmax 850. The real issue is these 68rfe’s suck and boosted launches eat them up. Might get 50 launches before a refresh. If I did it again I’d consider a built Allison swap, but I think you have clearance issues with a squarebody on the firewall?

[@Not_Genie]

JH Drags coming soon

[@daboenterprize8265]

Hope you guys kick some butt🎉🎉🎉🎉❤❤❤❤

[@BobbySonnNews]

This video shows Wyatt built his truck all wrong 😂😂😂😂

[@williamward3492]

You need to get with nitrous express and get them on board and make some videos with Jimmy Dale

[@DisasterRC]

@16:40 ain't got no gas in it 😂

[@MitchellBraddy]

Love the build and hope you spin your wheels. But dang he should have just used the death or fire wheel to cut those rivets out . J.S . And then hammer and chisel them out.

[@jamestapley6852]

Dang I could’ve used that spare tire brace 😂

[@Timrsnakess]

Being able to manage a somewhat organized shop without "projects" that are idle for months/years will make that space more than big enough for whatever you want to do

[@Airsofthelpvancouver1963]

Justin, your drag truck needs some length cut off maybe a foot and just modified the front of the bedsides and cut 12-14" off the frame and make a "short bed".

[@jeffdickerson3]

Good work!!

[@Jcarney87]

Tru cool 40k is what all us gmt800 guys run for trans cooler. Bolts right in up front. Huge. Low pressure drop.

[@thekyrobman]

Coming to my neck of the woods.

[@rjgraham7185]

Paint them damn rust bucket wheels brother lol 😅😅😅

[@timtaylor6147]

Hey wasting all that gas to cut out a riveted frame piece Cut rivets heads off air hammerout the pin repeat on bottom then torch the center Saves alot of acetylene Ive done a bunch of Silverado builds Some money saving definitely required these days

[@timtaylor6147]

As a side note My bud left the oxy on with a new bottle Them old hoses an torch leak some I came in to an empty bottle That a bitch

[@FrankLSD38]

Last Minute Motorsports You should make a t-shirt

[@brycea0225]

I’d bet those steel bedsides aren’t much heavier at all compared to fiberglass. Fiberglass is a lighter material but it’s significantly thicker than the steel

[@howiefeltersnatcher]

Weld small round bar like drag cars

[@doane58]

That box is JH proof lol

[@Abourgeois17]

Will you be at the New England 900?

[@westonmaslow9727]

Plz tell me you are bringing it to cleetus no prep race

[@loganb5657]

Ditch that heavy wiring harness get you a fuel tech 550 and their wire harness and see if wyatt from boostedboiz can help wire the truck 😂

[@robo1210]

Bosch or motech standalone is the way to go for diesels.

[@Tyler_03319]

Do I see the old shop truck giveaway in the background?

[@Enter-a-name55]

Who did the cage work in the truck ?

[@cmsracing]

Please run it, boggers or no boggers!

[@ReysGarage]

Yo yo yo!!!! 🍻🍻🍻

[@allenpeacock6061]

How much for the green KFX in the corner collecting dust?

[@benitoquintanilla4886]

Is that a quadzilla in the background?

[@jayburrough4308]

What engine temperature does diesel usually run at I haven't been around them much

[@stevencherrett-eb6zh]

I want to see you rip that green quad

[@muddranger]

What class is this going to run?

[@SoDogtravels]

True red nick

[@SlidewayZ28]

Are you coming to Stafford CT next weekend? I fucking hope so !!!!

[@kylelumpkins291]

👍

[@adama5685]

I'd put the old ac stuff in the 7.3l

[@adama5685]

Scratch that didn't realize it was a duramax😂😂

[@Dannon65]

Who’s kfx 700 v-force is that collecting dust?

[@willmortimer8519]

The ac is those two fly windows

[@wade2277]

Do you remember when Montana broke his trans in half launching his truck with Garrett in the parking lot? Lmao.

[@bigmikes2140]

Get that man a welding cap before he catches a cherry on his head

[@watahyahknow]

wonder if the county would give problems to put a floor on top of the existing building , that might solve some of the space issues aspecially if you convert a 4 post lift intoo a lift platform you dont look intoo the tank you rub it : I AM THE GEENIE OF THE GASTAAAANK WAT IS YOURE WISH MASTER .......hmmmmm well now that you mention it i made a list hang on........

[@bucket6429]

Get a plastic Silverado ss front bumper to save weight over the stock metal one.

[@dugangant]

Hope those bed sides don't come off with that truck riding backwards on the trailer.

[@gibraltarhandyman7363]

Reading Pennsylvania air show or ww2 weekend please 🙏

[@hpc4839]

Did I spot the past giveaway truck at 28:55?

[@joshuacoffey5766]

Nah that’s a different truck.