No Name Airbrush Review

[@jackmiller8763]

Thanks Paul for the demonstration. Hoping to pick one these up soon. Just getting into doing some diecast customs

[@RackwitzG]

I got mine yesterday from another brand. There are many exact same airbrush kits with different brand names. If you push the auto button on the bottom, it will spray at half power. I tested mine yesterday with water diluted paint, because I had no thinner. The spray was good for a first time, but the paint puddled up on my testpiece, because the paint didn't dry fast enough. Better use proper thinner. Over all I'm suprised how good the results were as a firsttimer. It clogged when I started though. Gave it a quick clean and it worked fine after that. So i recommend this gun for modelers and to clean it before first use.

[@Brock857]

I just ordered this brush it was fast and easy no hitch. Only $60.00 u.s. free shipping, I can't wait till it arrives. I told them you sent me.

[@PanoramicPanduh]

How was it?

[@Brock857]

@@PanoramicPanduh good quality, I just haven't gotten the knack for mixing paint properly. Battery seem to last forever.

[@kennyterry3824]

Awesome Review, just exactly the information I needed, and right when I was trying to figure out what AirBrush to buy to get started again. Thanks for your time and effort.

[@skylar1112]

Never used an airbrush before, I've always wanted one but live in an apartment building, this looks perfect, I hope this is the answer. Thanks!

[@badboy_kustomz1648]

I use a neo and a grex airbrush. 2 great guns, only reason I bought them was because of a great deal. Great stuff! Was sent over by Outlaw speedshop

[@juanquirarte6061]

Awesome, thanks for all the indormation on this review.

[@CLD316]

I just ordered me one thanks to your review! And I mentioned you in the comment section at checkout! 👍🏻

[@bobkaley432]

Did you know that if you press down 3 times it will change the pressure up to 3 different pressures. Try it. Mine does.

[@jaykobbaurer227]

Only the new ones do that

[@Sun_Wanong_WFR7169]

That’s cool... I may have to get and carry in the truck with me

[@mikes1031]

I know this video is over a year old, But a nice review. I deal with Spraygunner all the time and they are a great bunch with great prices and always helpful with info ! If I may give a tip for you and fellow viewers. When you pulled the head off the airbrush to clean it in the video, you should have cleaned the needle with a Q-Tip or paper towel and cleaner. before putting the head back on. Also if you happen to forget to clean it well or leave paint to dry on the needle, pull the needle out the front to clean it. pulling needles with hard dry paint on them, out the back can and will damage the needle packing seal over time. Which will let paint from the cup leak back into the trigger and back handle area, making a real mess to clean right. On some airbrushes those seals can NOT be replaced buy the user, but have to be sent to the manufacture for repairs or just toss it in the junk drawer. I also learned from Dylan @ Spraygunner that those mini compressors will only work with certain airbrushes / NOT all, so only use the airbrush that came with the kit. keep it clean so it last and you can keep having fun.

[@jasonarce5169]

Thanks on the setting info. I just got 1of these kits. They changed the name to AUTOLOCK. But it's the same unit. But the instructions don't say anything about changing the pressure setting. so thanks for the info I needed that. Great video.

[@jaykobbaurer227]

Autolock is a totally different brand

[@demetriospappas1112]

The coverage is not 100% from your airbrush it’s more from the paint you’re using. You can have some of the best airbrushes in the world, but if you use crappy pain on it, your coverage is not gonna be very good unless you go over a few times. Still a great video review of the airbrush. I think I will buy one

[@DiecastGraveyard]

Very good point my friend

[@BirneGilmore]

I got this to in germany, but mine is not branded ... Seems that the producer in China sells it under different names in the world, may be also through different plattforms. I found this also with other side equipment (for example a second cup made of plastic) ... funny ... But on the System and the Brush itself: Super quality so far. I used it on Warhammer and other Miniatures with white and black primer as well as with thinned acrylic colors and it works well like other "normal" systems with external compressor. When going deeper I would usugest to add a brush with extra flow control to get the most out of the portable compressor, but even without you can get very good results with this pack, especially when comparing with others and their price as well ;)

[@cutrockr-diecastracing2773]

Interesting review! Cheers

[@weaponxwing6437]

....nice review thankx for all the info. now i jus have to get $60.00 nd i'll have the air brush nd compressor that i always wish i had...

[@Jsellers1965]

Very Nice unit. I would like it better if the pump was separated with a hose.

[@soldofsolitude]

I've been looking at these for about 5 months and was hesitant to buy..guess I'll pull the trigger and order now...thanx for the review

[@Jsellers1965]

@@DiecastGraveyard I think it's great. I just have huge hands is all. LOL

[@rcforever3437]

thank you so much

[@12VREP]

Can you tell me what product you use to clean you airbrush after spraying SPECTRAFLAME paint???

[@maldonado9315]

where can I buy the holder for hot wheels thanks

[@maldonado9315]

Thank you very much I'm from Mexico and I'm new to your channel nice 👍 gracias 🙏

[@sarge27271]

Yeah, I'm waiting for the Bluetooth model to be available. LMAO Actually, it's a smart little system for a beginner. And thinking about it, I might just get one. It would be useful as a second airbrush. Ex: this one does the primer. And the regular one for paint work. It would also be a great portable item. If you do work at a friend's or at your local Hobby Shop, (wargaming etc) BTW have you tried another brush on the compressor? Thanks for the review. Have a Happy New Year! Cheers

[@brandielee7971]

I really want one of these but they're out of stock 😭

[@mitchrell7265]

Can you get more/bigger paint cups for it?

[@rachelboothe5075]

This video is really awesome!! I want an airbrush for decorating cookies using the product Americolor Amermist that will give a smooth even spray pattern. Americolor Amermist is basically food coloring. I have an Air Genie Pro that comes highly recommended to decorate cookies. However, it gives a spotty spray pattern. I have deep cleaned it and it has not fixed the spotty spray. Does this one have a smooth even spray pattern? Also can it be cleaned with something that is edible since I will be using it on something to be eaten? Also, is there a 0.5 mm optional needle that can be used with it? I like to spray metallic food coloring and it tends to be a little thicker and needs a 0.5 mm.

[@rachelboothe5075]

@@DiecastGraveyard Thank you so much for your prompt reply. I will email you today with pics.

[@MrCcfly]

and no charger ?

[@johnnytizz]

Can this be adapted to use a hose?

[@koomipot_satwika_diecast]

Good penbrush myfriend