No Need To Clay!? How To 3pH Wash w/ P&S Detail Products! (Crystal Wash & Frostbite)

In this one we check out the new P&S frostbite soap when paired up with Crystal Wash for a full 3ph wash system!
Canadian 3pH Wash- • P&S Frostbite - Spring...
All JTC’s Promotional Codes- superlink.io/jamiethecleaner
P&S Clean Maker- psdetailproducts.com/products...
Shinemate Rotary- amzn.to/49KFwD4
Shinemate Dual Action- amzn.to/49O14yR
Ultra Air Blaster- amzn.to/490YvbV
Ultra Air Blaster Plus-amzn.to/47zIGaY
Ultra Dressing Applicator-amzn.to/420nda3
Ultra Engine Blaster-amzn.to/3vFDt43
Omniwall System- amzn.to/3HnYjrj
IK Sprayers:
IK Foam Pro 12-amzn.to/3vriZMo
IK Multi Pro 12 (No Battery)- amzn.to/41Tt1Cc
IK Multi Pro 2+- amzn.to/41LRjxU
IK Multi Sprayer- amzn.to/48M3Jbn
IK Multi Mini 360- amzn.to/3S7pkp5
Wheel Bucket:
Detail Factory Tire Brush- amzn.to/3OeAEh1
Detail Factory Fender Well Brush- amzn.to/3S5HRC5
Wheel Mitt- amzn.to/4aJoAO6
Detail Brush- amzn.to/47ndM5E
Drill Brush- amzn.to/3S7Zt0r
Blue Ultra Brush- amzn.to/48ninWK
Ez Detail Brush- amzn.to/4berLh3
Wash Bucket:
Ultra Black Sponge- amzn.to/3vrLz0b
Wash Mitt-amzn.to/47pUjBf
Emblem Brush-amzn.to/41Plq7v
Blue Clay Towel-amzn.to/41RNxmv
Red Clay Towel- amzn.to/48pm9yG
Clay Scrubber-amzn.to/4aDs0C2s
Towels:
TRC FTW’s- amzn.to/41Ra7vA
TRC 1500 Drying Towel- amzn.to/3TT267E
TRC Gauntlet Drying Towel- amzn.to/48wDsOE
Liquid8er Drying Towel- amzn.to/4aQ15TS
Pressure Washer- amzn.to/3NUyKBY
MJJC Foam Cannon- amzn.to/47sgmqV
MTM Foam Cannon- amzn.to/3H6Nh9R
Mtm 4.0 Nozzle 40 Degree- amzn.to/41R5JNc
Mtm Nozzle 4.0 Nozzle 25 Degree- amzn.to/47qkzLN
MTM Hydro Foam Cannon Bundle: amzn.to/3HiAzop
Bear Force Brass- amzn.to/3UKj1JM
Bear Force Stainless- amzn.to/433GMPc
Cheap Foam Cannon- amzn.to/4cZ8hhs

[@armourdetailsupply]

Super cool P&S has a version of this. We're slacking

[@JamieTheCleaner]

BRING ON THE ACID 😤🧼💪

[@stephaniemarkey9396]

Make an APC first!

[@Jose.G.Y]

Referring to crystal wash? That thing has apparently been in the basement for 25 years 😂

[@chrisbradley3224]

@@JamieTheCleaner Just please no ABF like Jimbo's Pure Magic (or HF) :).

[@jbalinski]

👀

[@tonykemper8896]

being new to the culture im now learning the different ways to do a decon wash. I would have to say a 3ph wash seems better than a clay step, one less step to potentially mar the paint. Think I might have to pick up some frost bite and crystal wash I already have the radiance........... and some jtc clean maker as well!!👍🏻

[@KPDetails]

Speeds up the decontamination process, nice. Time is money!

[@Sheldon_Classen]

Simply can’t go wrong with some P&S fantastic work👊🏼👊🏼

[@millerdetailing4176]

Great video and products Jamie appreciate the content.

[@jefferrrson1x]

Mannnn that was legit. Thanks for the video. I’m always scared to do the pre wash w chemicals but I think I’ll try the ones you showed today.

[@T-BoneTodd]

Awsome combo!💯💪🏼

[@PandSDetailProducts]

Very Cool Video! Thanks JTC

[@BXGreen]

Great prep video 👍👍

[@MikesAutoDetailing]

Fantastic video

[@jbalinski]

I've gotta get on the Crystal Wash train so I can try this out.

[@ethanblan435]

It’s nice if you can keep from inhaling it. Also would recommend an ik because trigger spraying the whole car ain’t it 😂

[@jbalinski]

@@ethanblan435 my lungs are well seasoned lol

[@JamieTheCleaner]

@@ethanblan435 definitely IK sprayer it up I just like to use the labeled bottle for video purposes 💪🧼

[@DetailsNMe]

Is the smell super caustic?

[@JamieTheCleaner]

@@DetailsNMe it’ll make you cough for sure but it’s not too bad

[@Stainlessautos]

I’ve been doing the same with crystal wash and griots foaming surface prep for a little while now. I think I’m going to switch to frostbite after getting a bottle from Eddie. From there I’ll rinseless with diy or absolute, and then clay towel with an iron remover.

[@benkneisley3001]

Was trying to grasp what role the Frostbite has. I am familiar with Griots foaming surface prep. Good comparison! Thanks for the insight

[@Stainlessautos]

@@benkneisley3001 sure thing, frost bite smells much better too lol

[@NickEscoyne]

Isn't the point of using crystal wash so you don't have to use normal iron remover ?

[@Stainlessautos]

@@NickEscoyneon super trashed vehicles, white and grey especially, you still might need an iron remover and clay, it’ll just be much easier and quicker. If I don’t have any visible iron or contamination I skip that step. It’s all about assessment really.

[@RCdetails203]

I need to start reaching for Crystal wash more often

[@Ecdetails]

Dope video,bro

[@jamesp57867]

P&S came to play!

[@thelastdetail5044]

Great video Jamie. What part of Louisiana you in? I’m in NWLA (Bossier City) area. Cool to see another Louisiana guy doing his thang lol.

[@andrewg170]

I have enjoyed using frostbite in the cannon and the bucket. How often can I use it on a ceramic coated car?

[@btbd2785]

I have used the crystal wash and then wait until it crystallizes and then foam.over with higher ph snow foam. issue is that even after thoroughly washing it off ypu may still see some stains from the crystal wash. I then.habe to go.over with contact wash to.remove them.

[@darrallmeharg6912]

I like big trucks and i can not lie, Thats a super nice truck. I'm glad its in good hands.

[@chrism1157]

That Chevy grill will drip soap and water for days. I have a 2022 1500 with a similar grill. Rinse it like crazy, blow it out, 3 hours later soapy water drips out.

[@JamieTheCleaner]

Yep!

[@PolishedMobileDetailing503]

Any Chevy/gmc grill 2019+ are my worst enemy.

[@epap1375]

That’s why I always flood the car with a high volume hose after pressure washing. The pressure washer is great for knocking off grime but with these new high foaming soaps any small amount will keep getting reactivated. The hose floods out all the cracks and crevices to remove any remaining soap. You’ll still have to deal with water dripping but I’ll take that any day over soap residue especially the higher ph stuff

[@DluxMobileDetailing]

Where did u get those buckets and guards?!

[@Orr_s]

Which orifice do you prefer in that MJJC? And how much psi you running, jus got mine in and wondering if i should go 1.1…im running a cheap harbor freight 2000psi 1.2gpm i think. All upgraded hoses and gun, same nozzle you have shown

[@RCdetails203]

Do you like using Crystal Wash on ceramic coated vehicles ?? I’ve never tried it but doing a decontamination on a truck that was ceramic coated 12 months ago today thinking about trying it out

[@MyGuyKirby]

I always hate finding tar specks after the drying process..

[@ribaljamal564]

The only issue I have with crystal wash is that there are no visible indications that it’s removing anything, when you put it against things like iron buster and IronX it’s just tough to pick it 🫠 like why can’t it crystallize and become red or something youno

[@MrKennyanders]

Will a good decon destroy the Resist I used as a topper for my coating?

[@JamieTheCleaner]

Nope should be fine resist is pretty stout

[@djyeye74]

If crystal wash is acid based will it remove watermarks off glass?

[@JamieTheCleaner]

It will help but not completely remove 💪

[@legend995]

Just put grahpene coat on my i plan to do weekly washes. Will the crystal, frostbite, and radiance combo beto strong and strip my coating. Still not to well versed in wash phs. It seems like in every video i watch someone uses something different.

[@JamieTheCleaner]

No won’t bother it at all 👍 will actually help it perform better in the long run

[@benkneisley3001]

Around 7:15 in this video, while the emblems were being brushed….what was the residue (3spots) in the of that door? Those looked nasty almost as though clear had been removed. Have not tried Crystal or Frostbite.

[@FantasticDetailing]

That's water

[@davidsteckley8846]

I think I’ll stick with Carpro.

[@viperrcr]

Hmmm, decisions, decisions...P&S 3-pH system or Labocosmetica 3-pH system...Opinions please!

[@JamieTheCleaner]

Labo is gonna be the stronger wash system so depends on how dirty the vehicles are 👍

[@Orr_s]

Is crystal wash safe for headlights and tail as well?

[@JamieTheCleaner]

Yes

[@haroldcottam8174]

Will the 3 PH system affect sealants or waxes?

[@JamieTheCleaner]

Strips waxes and restores coatings 👍

[@joerossi4231]

I want to get some frostbite but what is the ph once diluted thru the cannon? Is it still alkaline ?

[@PolishedMobileDetailing503]

It will be closer to a 7 once diluted.

[@joerossi4231]

@@PolishedMobileDetailing503 pardon my ignorance but I rewatched the video with headphones and I heard Jamie say that it was a 9.5 I believe on the scale with a 10:1 dilution ratio ? So genuinely curious what the case is cause I would love a product like this to have.

[@PolishedMobileDetailing503]

@@joerossi4231 in a foam cannon it’s a 9.5, in a bucket dilution it goes to ph neutral approximately. 10:1 in a cannon vs 150:1 or so bucket dilution.

[@joerossi4231]

@@PolishedMobileDetailing503 appreciate the info thank you very much !

[@Buckyvw]

Cinderella gloves were the real takeaway

[@adnerperez5598]

ese carro esta limpio...no se que se puede ver la diferencia...nos guataria ver un carro sucio de verdad

[@1stfrompuertorico568]

First!!!

[@stephaniemarkey9396]

Crystal Wash is good, but it doesn't play nicely with all the wet weather up here so unfortunately not the best fit in my regular arsenal. Might give Frostbite a try though.