No Talk, Just Wrenching - Swapping Transmissions on a B18 CRX - Let's hope it works! ASR 6/8/24

  Рет қаралды 1,987

Garage Built Hondas

Garage Built Hondas

Күн бұрын

Пікірлер: 22
@soundboydesign1373
@soundboydesign1373 5 ай бұрын
Best line..."...before lunch..." lolol...big up lads
@TONI5-25
@TONI5-25 5 ай бұрын
Nothing better than building Hondas.
@CesarsCarCorner
@CesarsCarCorner 4 ай бұрын
Check the dentent spring in the transmission. Those usually wear out and cause popping. $20-$30 fix; if it still happens, you have synchro issues.
@mcef9117
@mcef9117 5 ай бұрын
Kicking some more honda butt! Awesome
@novathao5322
@novathao5322 5 ай бұрын
That b18 was screaming!!💯
@GarageBuiltHondas
@GarageBuiltHondas 5 ай бұрын
It's solid and fun to drive!
@throughmyeyesmedia6492
@throughmyeyesmedia6492 5 ай бұрын
Some Wrench time is always fun. 💪🏽
@GarageBuiltHondas
@GarageBuiltHondas 5 ай бұрын
Always!
@drmstudio5050
@drmstudio5050 5 ай бұрын
Sweet!
@Givelasagna
@Givelasagna 5 ай бұрын
Isn't pop out caused by a worn pilot bearing or synchros? That wouldn't be hard to repair. you'd just have to tear into the transmission
@GarageBuiltHondas
@GarageBuiltHondas 5 ай бұрын
Usually. He's going to have it completely rebuilt and then probably the same with the new one
@SlowDelSol
@SlowDelSol 5 ай бұрын
@@GarageBuiltHondasI’m about to order a rebuild kit for my S20 B000. I think I’m going with the Syncrotech kit at $500 do you think that’s the best option? Anything else I should consider or know?
@Busydadgarage717
@Busydadgarage717 5 ай бұрын
The sycro kits with the bearings are a great option. Replacing the bearings is a good choice if in there. I have a bad input shaft bearing in my YS1. The thing to note on that is there is shaft tolerance specification. Check the width of your old bearings vs new. If same, no issue. If different, take to a machine shop or trans shop to have them check the tolerance.
@TheVas1968
@TheVas1968 5 ай бұрын
GRASIAS [POR CONPARETIR
@accordingtokevin7501
@accordingtokevin7501 5 ай бұрын
Where is this track?
@GarageBuiltHondas
@GarageBuiltHondas 5 ай бұрын
www.racingcircuits.info/north-america/usa/arroyo-seco.html
@scarlettohara2609
@scarlettohara2609 5 ай бұрын
Would you, or anyone you know, be interested in buying a 99 Teggy?
@GarageBuiltHondas
@GarageBuiltHondas 4 ай бұрын
What's the deal with it?
@scarlettohara2609
@scarlettohara2609 4 ай бұрын
@@GarageBuiltHondas LS, Auto, needs lots of work under the hood, hasn't run since '09. I'm in EPT.
@GarageBuiltHondas
@GarageBuiltHondas 4 ай бұрын
How much do you want for it?
@scarlettohara2609
@scarlettohara2609 4 ай бұрын
Uncertain on price. I'd rather you check it out first. Got lots of potential, but it's been through a lot. Are you free sometime next week to check it out?
500+ hp K20 Turbo Twingo From Hell! // Nürburgring
17:01
Misha Charoudin
Рет қаралды 1,7 МЛН
Увеличили моцареллу для @Lorenzo.bagnati
00:48
Кушать Хочу
Рет қаралды 7 МЛН
When u fight over the armrest
00:41
Adam W
Рет қаралды 27 МЛН
We Put a Wish.com Turbo on a Walmart Motorcycle
15:05
Donut
Рет қаралды 4,2 МЛН
I Bought a Baby Honda NSX!
21:02
Mat Watson Cars
Рет қаралды 638 М.
Jackspania N1 3" Muffler and Trubendz Piping on my 95 Civic B16A
13:21
Garage Built Hondas
Рет қаралды 2,6 М.
Revel Medallion by Tanabe - 1988 Honda CRX Si fitment - Brake Upgrade?
19:00
Garage Built Hondas
Рет қаралды 3,4 М.
Old Footage of Gabe's EM1 2000 Civic Si - Walk-around before he sold it
7:25
Garage Built Hondas
Рет қаралды 1,8 М.
No VTEC! What's Exactly Wrong? - Project BADASS2000 - EP17
16:10
Speed Academy
Рет қаралды 263 М.
We turn 2 Lada inline-4's into a V8
13:56
Garage 54
Рет қаралды 297 М.
Увеличили моцареллу для @Lorenzo.bagnati
00:48
Кушать Хочу
Рет қаралды 7 МЛН