No Touch = No Scratches. A True No Touch Car Wash.

Touch-less Car Wash - Safe, Effective, and Scratch-Free!
A touch-less car wash provides a thorough clean without any direct contact with your vehicle’s surface, ensuring the safety of your paint and reducing the risk of swirl marks or scratches. Using this advanced cleaning solution and high-pressure water, you can remove dirt, grime, and contaminants without the need for wash mitts, brushes or towels.
Why Choose a Touch-less Wash?
Scratch-Free: No physical contact with your car’s paint, preserving its finish.
Safe for All Vehicles: Ideal for all paint types, including ceramic-coated and delicate finishes.
Efficient Cleaning: Removes tough dirt and debris with powerful detergents and a pressure washer.
Experience the convenience of a high-quality wash that’s gentle on your car but tough on dirt. Perfect for regular maintenance or between full detailing sessions.
Check out my website for more in depth descriptions and links to all the products and much more www.hawaiideta...
If you found this video helpful or at least entertaining please consider subscribing.
SUBSCRIBE / @hawaiidetailing
Links to the products used in the video
Touch Less Car Wash Soap amzn.to/3XHz8I2
Pressure Washer www.hawaiideta...
Foam Cannon amzn.to/4ehGWqU
TShirts that support the channel Thanks a lot. hawaii-detaili...
MY FAVORITE AMAZON PRODUCTS www.amazon.com...
FACEBOOK / hawaii-tesla-and-detai...
INSTAGRAM / hawaiidetailinghq
TIKTOK / hawaiidetailing
PLAYLISTS
PRESSURE WASHER • Pressure Washer
GARAGE • Garage & Equipment
EXTRACTOR • Carpet Extractor
DETAILING • Detailing
As an Amazon Associate I earn from qualifying purchases. Thanks for your support.
#hawaiidetailing #autodetailing

[@HawaiiDetailing]

Want more info on this product or any of my recommendations and processes? Check out my website. www.hawaiidetailing.com/touchlesswash

[@diydetailofficial]

You have the best subscribe pop up on KZbin

[@HawaiiDetailing]

Thanks a lot. Started as a funny add on and ended up making the cut. It’s obvious when you look at my shelf, I love your product line and what you guys stand for.

[@diydetailofficial]

@@HawaiiDetailing thanks

[@ita-n6g]

DIY detail has some amazing stuff. I basically own every cleaning product they have and are a must have for me in my garage. I am just your average DIYER that is obsessed with this hobby and cars. The products are so freakin easy to use, it makes me look like a pro. The results speak for themselves. I cut down half of my products now. I was always looking for the next best thing. For me, DIY detail is enough. and I am not even sponsored by them lol. Just a loyal customer.

[@lloydalmeida7699]

Great video, quick question if you have product left in canon can you put it in an other empty bottle to reused later. Thanks 😊

[@HawaiiDetailing]

Yes you can! I have lids and spare bottles for my foam cannons. I put the lid on and it stores well short term.

[@lloydalmeida7699]

@@HawaiiDetailing thanks for responding much appreciated

[@jpstatum]

That is a great idea. I’ll have to pick up some lids for my MJCC foam cannon.

[@nomad509]

Thanks for shining the light on another product in this category besides Bilt Hamber, which is something I have been wanting to try out for that mid week washes.

[@HawaiiDetailing]

Thanks.

[@joshm2243]

Man, I was just thinking of messaging you earlier but got sidetracked. Haven't seen any new content for awhile. Glad to see your back to making content.

[@HawaiiDetailing]

Thanks buddy. I have been busy with life. I try to make videos when I come across good stuff. Will have to step it up again. I appreciate the support.

[@joshm2243]

@@HawaiiDetailing Glad to hear Jeremy. Hey, you should look into trying out/reviewing the new Ryobi 18v HP Compact Blower. I bought one months ago. It's not a leaf blower, but it will blow dry leaves with ease. It will aid in drying vehicles. I bought mine for hvac trade, blowing/clearing leaves out and around condensers, jobsite cleanup. It does go through batteries with continuous full power on. You can get the kit right now for $130 at HD.

[@HawaiiDetailing]

Thanks for the tip. I will take a look at it

[@hartlanddetailer5670]

At $69 a gallon, this will NOT be used in my shop. Not to take anything away from this product, it does NOT make good business since. This product may be a higher pH? My higher pH sopa cost $9 a gallon, not ready to switch. Thanks for the showcase...

[@So818cal]

What high ph soap did you use?

[@HawaiiDetailing]

Yeah pricey but I did enjoy using it. Thanks for watching

[@RayNLA]

Who asked you to use it in your shop?

[@BubbaJohnGaming]

You should try the Chem-x Stars and stripes with snake oil!

[@HawaiiDetailing]

will do.

[@ecotec4]

I just tried those 3 chem x products on my dad's commercial van after sitting for a month in dirt and can say it works!

[@aarongonzalez2156]

i use koch chemie protector wash instead of snake oil

[@ita-n6g]

I might have to test this out. so far, nothing comes close to chem x stars and stripes. BUT I also prefer to use labocosmetica PRIMUS. That stuff is also INSANE. My cars come out 95% CLEAN. If not 100% most times when using stars and stripes and or labocosmetica. I tried snake oil. ITS OK. I prefer to use DIY DETAIL QUICK BEADS or KC protector wax. I also started using armour detail supply amplify as a drying aid as well and the car comes out great. But, I have to say, DIY detail quick beads is where its at. Hands down.

[@HawaiiDetailing]

Thanks for sharing. All good choices. I enjoy trying new stuff and I had fun with this one. I liked it.

[@andhen12]

Actually looks pretty good. Gallon price is a bit high.

[@HawaiiDetailing]

At 2oz per cannon its pretty affordable and works well too. I agree that the gallon has a higher price but I do think it is worth it

[@andhen12]

@HawaiiDetailing or even 1oz if you only fill half the cannon up. So the price pr wash isn't too bad by itself.

[@HawaiiDetailing]

Yeah. It takes about a half a cannon to do a normal car. I have lids for my cannons so I can save the other half for the next wash.

[@aarongonzalez2156]

another banger jeremy. have you tried chem x? my go to for a touchless wash

[@HawaiiDetailing]

No. I will have to give it a try

[@andrewkennedy9704]

Will you be trying the Clean by pan the organizer line up?

[@HawaiiDetailing]

At some point I will want to bring it in and see how it does.

[@RaulMedina-b3d]

I see alot of detailers use a blower to dry a car, but whenever I use my ego 765 I just end up with dry streaks everywhere. I then go back with 3d final touch to clear everything up. What gives? Do I need a true ceramic coating? My cars currently have a paste ceramic coating. Thanks buddy

[@hartlanddetailer5670]

YES, apply a coating, they are amazing, water will fall off!

[@v8tergt653]

Try Rinse Off from Adams, its the best water beading/sheeting product Ive tried to far!! You can apply it using a foam cannon and it last a couple of weeks. Make washing the car a breeze and I just drive my car at 70mph for half a mile and dry off a few dripping spots a few minutes after Im back. But again Im using deionized water which you can just leave sitting in the sun and you dont get any waterspots at all.

[@privacyrules]

Use a drying towel for the majority of your car, then use the blower for the grill, mirrors, license plate area, etc.

[@bbog4694]

You have to use too much soap in soap canon it’s not cost-effective for the price of the bottle .

[@bwilliam4023]

i love active foam and the smell of it

[@autodetailingpodcast]

Thanks for the video!

[@HawaiiDetailing]

Good soap for sure. Thanks Jimbo

[@thrbrown]

Great video! Thanks for sharing. I appreciate how you tested the 2 oz too. 👍

[@HawaiiDetailing]

Thanks for watching!

[@ilikechickensausages2075]

That little dog was so cute! And the foam did a good job at pulling off the dirt.🇦🇺

[@HawaiiDetailing]

Hahaha. Thanks and yes it did a good job

[@edwinnegron7758]

ALOHA FROM S.W. FL. IN MY CART TO TEST DOWN HERE IN HOTTER THAN YOU KNOW WHAT FL. BTW ROCCO IS A BEAST!!!! CUTE

[@HawaiiDetailing]

Awesome. Thanks. Rocco is a cool one.

[@harrmony]

I see you pimp!!!!

[@ridergarnes7]

When are you getting the dual krenzla so you can peel the paint off your cars

[@HawaiiDetailing]

Hahahaha. Thats funny

[@dtna]

How long do you let the foam dwell on your car? Thnx.

[@HawaiiDetailing]

as long as possible but do not let it dry. Soap drying on the paint is never good. The actual time will vary based on the conditions where you are.

[@mikegeran8447]

Jeremy… the coolest cucumber on You Tube. 👍

[@HawaiiDetailing]

Thanks man. I appreciate it

[@ViciousMo]

Good to see you Jeremy! been a minute!

[@HawaiiDetailing]

Thanks buddy.

[@miggs80]

I saw a video where a guy tested the PH and it was 12.5 opposed to 8. I’m hoping to see different people test it so it can be confirmed or not.

[@v8tergt653]

I confirmed that its 12, Jimbo says I tested it wrong meanwhile I have a certified lab . Than he proceeds to tell me that you need to test the foam after you spray it onto the car!! Thats beyond ridiculous, a foam cannon gets you a 10:1-100:1 dilution so thats just trying to get out of something thats way to high to be safe. Near bleach and oven cleaner territory of ph13

[@djspicky1]

Yes that is correct. They tested the PH directly out of the bottle and that is a high PH. Jimbo has already said that the PH drops down once it's out of the foam cannon. So the actual foam on the car will be a PH between 7 and 8 depending on the dilution used.

[@BrianW1612]

'Bad thick foam' should have been the caption for anyone who knows what a good foam is.

[@HawaiiDetailing]

Hahahaah.

[@BrianW1612]

@@HawaiiDetailing what's funny? It's fact.

[@rolyamsr8172]

have you tried superior products?

[@HawaiiDetailing]

No not yet

[@scottturner864]

Rocko is awesome!

[@HawaiiDetailing]

@@scottturner864 thanks man.

[@BK12344]

Wait one sec, ur telling me tht this is officially and soap that does not require u to do a contact wash at all???? I understand if the car is very dirty then u have to contact, do u have to pre wash the car with water first then apply the soap? im a lil skeptical l on this one, I will have to see more.

[@HawaiiDetailing]

Spray it on dry. It will remove a good bit of the dirt. Perfect No. Good yes. Those results on my cars were real. No BS. If you have a car full of road scum and nastiness a contact wash is going to have to be done. If you are mid week between washes and want a quick refresh this touchless process will work great. Do not forget that this is also a really good bucket soap also if you go that route. That’s my thoughts at least. Thanks for watching.

[@djspicky1]

Yes sir, just as Jeremy said depending on how dirty the car is you might have to contact wash. I've been using it for a couple of weeks and with 4 oz in my foam cannon I've been able to foam the car being dry, rinse, re foam with the rest of the soap in my foam cannon and contact wash. Soap has worked great.

[@BK12344]

@@HawaiiDetailing thank u for clarifying tht for me. ill have to give this a try some day.

[@mjezzi]

How long does it take you start to finish trying to be fast?

[@HawaiiDetailing]

10 mins? Mix spray rinse and blow dry. Oh and have to put everything away too.

[@mjezzi]

@@HawaiiDetailing 😍

[@216baja]

Hmmm interesting, i think that I will get me some of that.

[@HawaiiDetailing]

I enjoyed it for sure. Definitely worth trying out. Let me know how you like it.

[@216baja]

@@HawaiiDetailing will do my friend.

[@techfranzi]

Whats the pH level? Is it Alkaline?

[@HawaiiDetailing]

Says 8.5 on the website. I did not test it

[@techfranzi]

@@HawaiiDetailing Thanks for the info! I wonder how the pricing compares to Bilt Hamber and CarPeo Lift.

[@trianglechokeU]

is this safe for ceramic coatings?

[@HawaiiDetailing]

Yes. Both my cars are coated.

[@djspicky1]

​@@HawaiiDetailingwait a minute. How does that work, what's the process to ceramic coat a pet 😂😂😂

[@sergerobitaille6065]

What ph the soap

[@HawaiiDetailing]

check out 1:43 Its PH 8.5

[@djspicky1]

According to Jimbo soap should be around 12 to 13, but once diluted and foamed on the car it should drop down to 7 to 8

[@traviscrown9189]

Chem x Stars and Stripes dunks on this product….

[@miggs80]

Stars and Stripes can’t be used on a regular basis though. Has a lot of ingredients that eat up the paint .

[@traviscrown9189]

@@miggs80 I’ve never heard that. Not from any other user or the owner of the company.

[@DjNikGnashers]

I have some magic beans to sell you.

[@HawaiiDetailing]

Hahahaha. Yeah I have a bridge in east Kentucky that’s for sale if you want it for cheap.

[@v8tergt653]

How much did he pay you to make this review? I tested this product and it does not clean more than if you only spray water at a car, seriously ridiculous to say it works good and the results you’re showing are far from the reality what you get.

[@HawaiiDetailing]

1.6 million dollars. A Lamborghini. 2 weeks paid vacation at whistler BC. Oh and a new dirt bike. Hahahaha. $0. That’s what I got $0. All kidding aside these were the exact unedited results I got on my 2 ceramic coated vehicles. There is no miracle touchless wash soap that will clean a filthy vehicle 100% without work. It all depends on the type of contamination on the paint and how long it has baked on there. If it was strong enough to cut through a disaster it would also compromise sealants, coatings and or the paint. This soap did pretty damn good for me. I enjoyed using it and wanted to share my actual experience with it. You should reach out to Jimbo with any grievance you have. I don’t know Jimbo and l have not taken any money from him so I don’t speak for him or his product line. I would NEVER bullshit my viewers for any detailing company. Thanks for watching.