NO TURNING BACK NOW! CHOPPING UP MY 135i FOR 1M FLARES...

  Рет қаралды 27,087

Thic Whips

Thic Whips

Күн бұрын

Пікірлер: 90
@ThicWhips
@ThicWhips 11 ай бұрын
LINK TO 1M CONVERSION PARTS: tinyurl.com/3uphrbr3 BMW MODIFICATIONS FROM ALL OF MY BUILDS: www.thicwhips.com All of my Wheel & Tire Setups: tinyurl.com/yyftysns
@jake_spence
@jake_spence Жыл бұрын
I'm living vicariously through you right now... I've always wanted to do this to my 135i 😎
@Keepinitfinance
@Keepinitfinance Жыл бұрын
Do it! It will make great content!
@thingsforfree27
@thingsforfree27 Жыл бұрын
Once I’m done financing the 1 series
@salmak9148
@salmak9148 Жыл бұрын
I would be terrified doing this on my own for the first time! Great job guys!
@Bvrrv_
@Bvrrv_ Жыл бұрын
Props for going that route with the quarters, I couldn’t do what you did so I went the proper route of purchasing oem wheel wells and quarters. Ordered the parts in December 2021 thru my independent and two weeks later they arrived. If I could recommend one thing, when the car is painted remove the rear interior panels/access panels and the trunk side panels/sound isolation and spray 3M cavity wax to the back side of the arches. That will help with rust forming from the inside out. You took the steps of protecting the bare metal from the outside, a lot of people don’t think about protecting the inside. Nice work overall, I can’t wait to see the car fully painted. You got my subscription.
@IronPickle420
@IronPickle420 Жыл бұрын
Love to hear the body shop's opinion of yalls work! Looks solid. I can't wait for the finished product
@G30vang
@G30vang Жыл бұрын
I’m glad you guys didn’t leave the rivets to be shown! Looks way better molded
@Simon-Jin
@Simon-Jin Жыл бұрын
Great content as always! One small note on safety though... I took a class on welding in my university, and have learnt that doing MIG welding with the nozzle that far from the surface is not gonna get you enough gas coverage. That means your welds could potentially not penetrate enough into the body material (could cause failure down the road). Just pointing it out since the welds breaking in the future could cause you serious headache with rust. Otherwise, great stuff!
@user-gl5ld9vm7i
@user-gl5ld9vm7i Жыл бұрын
Love the 135i to M conversion! Great work.
@damo1979
@damo1979 Жыл бұрын
Massive respect to you Jon for challenging yourself and taking on new skills! Loving this build and looking forward to seeing the next update 👍🏼
@bradfoster8146
@bradfoster8146 Жыл бұрын
Your material is top notch dude. I'm very impressed with how much of the work you're tackling yourself
@tejbz999
@tejbz999 Жыл бұрын
I'm so glad you went fibreglass route helps your subscribers in the long run learn from this kind of work
@vadersf30
@vadersf30 Жыл бұрын
What a great video. Amazing to see what two guys can do when they just put their heads down and take the time to learn. Looks insane. Cant wait to see it!
@gewdies
@gewdies Жыл бұрын
You make this look so easy, when the time comes definitely gonna comeback and watch this. This is gonna look so good🔥
@jimmygarcia7146
@jimmygarcia7146 Жыл бұрын
Damn bro major props for all the hard work your putting into this build… going to be beautiful!
@leobats14
@leobats14 Жыл бұрын
Wow. Incredible work. I would be so terrified to take on this project. Respect is due.
@nofront711
@nofront711 Жыл бұрын
Man I really love the content, the vibes, the quality. I hope you go through the roof in the future.
@Unamatrix01
@Unamatrix01 Жыл бұрын
Fantastic job with the installation of the rear fender flares and the fibre glass work. Now you will have gain ed experience for when you install the Pandem kit on the E30.🔥
@andreagate542
@andreagate542 Жыл бұрын
Always putting out great content and inspiring the masses!!! How much of that shelf on the flare will you cut back and how do you enter face the wheel liner with the flare?
@homanmaster
@homanmaster Жыл бұрын
You and Chris killed it bro! Keep it up and the progress and the reward at the end will be worth it! Can’t wait to see the next step
@christopherpereira8580
@christopherpereira8580 Жыл бұрын
The build is coming along great especially with no experience. Keep up the good work TW
@CarsWithKeav
@CarsWithKeav Жыл бұрын
Great work so far. Awesome learning new skills hands on.
@billyringo2able
@billyringo2able Жыл бұрын
Silver on black not my taste i perfert the black apex but it s not my car...by the great content
@kylepalmer2360
@kylepalmer2360 Жыл бұрын
Thanks for motivating me again bro, I wanna do sumn to my f30 😌
@christopherpereira8580
@christopherpereira8580 Жыл бұрын
Did you sell the M4 GTS or do you still have it?
@Keepinitfinance
@Keepinitfinance Жыл бұрын
Yes
@Jerome-us7jx
@Jerome-us7jx Жыл бұрын
What happened to the E30 build?
@ithinkweregoingtoneedabigg8525
@ithinkweregoingtoneedabigg8525 Жыл бұрын
I’m so tempted to cut into my newest e92 m3. Bought it with bad paint, and plenty of miles so it’s a great car to do it to. Just SO SCARED! Hopefully this motivates me
@JD2.0N54
@JD2.0N54 Жыл бұрын
Nice.. I wanna do the same to my e92 335i with e92 M3 fender flares.
@cockysoul
@cockysoul Жыл бұрын
Pushing it to the limits! What a beast!
@josuevelazquez5465
@josuevelazquez5465 Жыл бұрын
That comes clear and very aggressive😎🏁
@vaiderlopez4203
@vaiderlopez4203 Жыл бұрын
Im the only one that was dying at the reflect on the paint how funny you guys looked like cartoon vibes lol (not hating tho) im a old subscriber 🤣🙏🏽
@Ndivhuhokharivhe
@Ndivhuhokharivhe Жыл бұрын
bro, can i ask, where did you ordered your flares from?
@thegeneral8019
@thegeneral8019 Жыл бұрын
You should protect all the glass from grind and weld sparks !
@chancemccloskey5665
@chancemccloskey5665 Жыл бұрын
You sir, have some massive cahones, congrats it looks sick
@jamarhall6378
@jamarhall6378 Жыл бұрын
That is 🔥but where is the gts at
@andywhite1636
@andywhite1636 Жыл бұрын
Build your vision your way and your true joy at the end is guaranteed 👌
@anrs3153
@anrs3153 Жыл бұрын
Can someone help me find the rear arches he used please ! I’m trying to get genuine bumpers / front arch / skirts but they only sell the rear as a whole panel, need to know what he used to match the rear arches with oem skirts !
@BuiltNotBought317
@BuiltNotBought317 Жыл бұрын
Can I ask what three products you used there in particular? The black sealer for the cuts, the spray on the bare metal, and I assume the last is just automotive epoxy?
@ThicWhips
@ThicWhips Жыл бұрын
amzn.to/3QKQVtM amzn.to/3WcGr7K amzn.to/3IUYw7e
@BuiltNotBought317
@BuiltNotBought317 Жыл бұрын
@@ThicWhips thanks!
@REFITSTUDIOS
@REFITSTUDIOS Жыл бұрын
When cutting do you leave the oem bracket that bolts the bumper to fender alone? Or that would also need to be cut out for fitment and a new bracket would have to be made?
@ThicWhips
@ThicWhips Жыл бұрын
We left it alone, I’ve seen some people cut them but I don’t think it’s necessary. I MIGHT shave it just a hair for more clearance later. We’ll see once I throw wheels/tires on
@soberdee693
@soberdee693 Жыл бұрын
What gauge is that material when you're welding?
@todddooley793
@todddooley793 Жыл бұрын
Good for you man! Looks good!
@amelalexander7992
@amelalexander7992 Жыл бұрын
You’re doing important work bro 🦾👊🏾
@F80_Nick
@F80_Nick Жыл бұрын
Holy Shit is this the Throtl KZbin channel!!! Lets go boys
@Just_Drivers_Cars
@Just_Drivers_Cars Жыл бұрын
Pretty brave man! Pretty awesome!
@mikepollastrelli7725
@mikepollastrelli7725 Жыл бұрын
This was so awesome. Keep it up!
@averyc7492
@averyc7492 Жыл бұрын
I wish I had a garage lift like that
@miguelaguilar3425
@miguelaguilar3425 Жыл бұрын
Where did you buy the fender flares?
@3rkowtf669
@3rkowtf669 Жыл бұрын
Great job guys 👍❗️
@boostitbob2192
@boostitbob2192 Жыл бұрын
Hey man love your videos… I’m about to start my 1M clone with my 128i … doing a n54 swap also … I need those rear fender flairs … how can I get my hands on them …
@ThicWhips
@ThicWhips Жыл бұрын
We are making them soon, stay tuned
@boostitbob2192
@boostitbob2192 Жыл бұрын
Hell yeah! Keep us posted … I’ll perches ASAP
@MrDanlatt
@MrDanlatt Жыл бұрын
You are a god send. There was one guy who used to and he took my money and ran early on in COVID. I’ve been looking for two years for another option.
@stellavouxinc945
@stellavouxinc945 Жыл бұрын
@@ThicWhips any update on this?
@stellavouxinc945
@stellavouxinc945 Жыл бұрын
@@MrDanlatt who was this person so we can be careful?
@xRomeo999
@xRomeo999 Жыл бұрын
Very impressive work .
@timg7885
@timg7885 Жыл бұрын
Nice job Bro!👊🏾💪🏾
@garypankhurst9014
@garypankhurst9014 Жыл бұрын
What colour you painting it
@geespot6275
@geespot6275 Жыл бұрын
Good job guy well done 👏🏽
@OffCamberTJ
@OffCamberTJ Жыл бұрын
Dude......Boo5t, whereTF you been? Need some of your content!
@raymak6129
@raymak6129 Жыл бұрын
where did you get the kit?
@felixthecat1528
@felixthecat1528 Жыл бұрын
😳 Oh s~!@ you really did 🤔 I was wondering how you were going to do it 👍🏾🔥🔥🔥🔥
@juansebastian4802
@juansebastian4802 Жыл бұрын
Can anybody pls give me the link to buy the 1m widebody?
@mogotsiphayane7580
@mogotsiphayane7580 Жыл бұрын
Damn ive been waiting for this content.
@illiquidreaming
@illiquidreaming Жыл бұрын
PAINT ALREADY IM DYING!
@BMWEnjoyer
@BMWEnjoyer Жыл бұрын
I miss his big boost 335
@chinallue
@chinallue Жыл бұрын
Nice very very nice
@Myles_Mcfly
@Myles_Mcfly Жыл бұрын
Hard!
@javiergalvez7808
@javiergalvez7808 Жыл бұрын
Nakai san
@JordanAnatole
@JordanAnatole Жыл бұрын
🔥🔥
@P4SDetails
@P4SDetails Жыл бұрын
Cutting anything scares me like surgery. Once you cut, you can’t uncut.
@ryanmattson1735
@ryanmattson1735 Жыл бұрын
You tackled that project on your own, props to you!
@BOO5Tchannel
@BOO5Tchannel Жыл бұрын
fun stuff
@ThicWhips
@ThicWhips Жыл бұрын
Party 🤘🏽
@speeddonors
@speeddonors Жыл бұрын
💙
@michealewk
@michealewk Жыл бұрын
Why didn't you get someone to press you metal ones
@ThicWhips
@ThicWhips Жыл бұрын
You say that like it’s some easy effortless task 😂 Fiberglass flares are on hundreds of cars, works fine. Look at rwb porsche
@michealewk
@michealewk Жыл бұрын
True True but I'm near damed sure there's somewhere over here in Europe that does metal ones. One good thing they won't be bubbling in 6 months from rust lol
@thegeneral8019
@thegeneral8019 Жыл бұрын
Nice result but you would have been better to get a sheet metal fabricator to make you up a pair of steel flares using the fibreglass ones as templates.
@ThicWhips
@ThicWhips Жыл бұрын
At that rate I’d simply buy oem quarters
@cg-st8jd
@cg-st8jd Жыл бұрын
✊🏼🔥💯
@MEyraud
@MEyraud Жыл бұрын
All this welding job to fiber glass a plastic part :/
@ThicWhips
@ThicWhips Жыл бұрын
It’s fiberglass not plastic.
How Much I Spent Building a FAKE 1M...
13:50
Thic Whips
Рет қаралды 34 М.
Building the baddest 135 on earth. (M3 Subframe & Brakes)
36:41
Thic Whips
Рет қаралды 65 М.
버블티로 부자 구별하는법4
00:11
진영민yeongmin
Рет қаралды 28 МЛН
How to whistle ?? 😱😱
00:31
Tibo InShape
Рет қаралды 23 МЛН
Will A Basketball Boat Hold My Weight?
00:30
MrBeast
Рет қаралды 127 МЛН
Wait for the last one 🤣🤣 #shorts #minecraft
00:28
Cosmo Guy
Рет қаралды 18 МЛН
INSTALLING NEW PARTS ON MY BMW E82 1M REPLICA 135I
12:22
Chris Slix
Рет қаралды 26 М.
Here's How Much It Cost To Build My 8hp Single Turbo BMW 135i
12:34
Next Level Rides
Рет қаралды 4,7 М.
INTRODUCING MY E82 1M CLONE!
7:03
Allmotor1m
Рет қаралды 10 М.
My 1M Clone Exterior is COMPLETE and it Looks PHENOMENAL!
10:49
Thic Whips
Рет қаралды 11 М.
Revealing My PROUDEST BMW Build to Date! (1m Clone)
17:46
Thic Whips
Рет қаралды 68 М.
BMW 1M Clone Build Video (135i to 1m clone conversion)
14:41
Graham's Garage
Рет қаралды 17 М.
FULL BUILD - REBUILDING A CRASH DAMAGED 2019 ASTON MARTIN VANTAGE
3:38:24
Mat Armstrong MK2
Рет қаралды 18 МЛН
My HONEST BMW N54 Powered 135i 1 Year Ownership Review...
15:20
Thic Whips Clips
Рет қаралды 7 М.
INSTALLING A 1M WIDEBODY KIT ON MY BMW E82 135I PT3
14:21
Chris Slix
Рет қаралды 42 М.
버블티로 부자 구별하는법4
00:11
진영민yeongmin
Рет қаралды 28 МЛН