Nodes+Cloth in Blender is CRAZY!

[@cleverpoly]

Comment New Video Ideas ⬇

[@abishek6629]

I would love to see more stuffs on blender that looks like C4D stuffs , like this one

[@SurmaAkter-o4w]

I want vehicle related videos please...

[@surensargsyan_]

Awesome tutorial, thank you! Is it possible to make wet fur/hair effect?

[@Thiagz]

thx great tutorial. I'll love to see curls particles curves animated like X-particles or trapcode.

[@euginemuntanga1995]

kzbin.info/www/bejne/rWi8g5-KhayepK8 i personally want this

[@BlenderSecrets]

Cool effect!

[@cleverpoly]

the king 🫡

[@giovannimontagnana6262]

@@cleverpoly both masters. You should make a collaboration :)

[@dn-dp8zc]

Só por salvar o cubo, já ganhou meu "like"

[@kitsunetay]

3:17 create group input: Shift + hold right mouse

[@Idea_Sphere]

in fact, it is not clear without hotkeys. and there is no explanation why this is being done. but a solid C for the lesson. I'm sure half of them didn't succeed or they sat at the lesson for more than one day

[@philipp7095]

Yes, that's right. It took me more than an hour just for the first 2 minutes

[@Pixationforlife]

make some donut first. simulation is clearly not for beginners

[@TheMisterTango]

@@philipp7095 If the first two minutes took you over an hour then you are clearly not ready for this stuff yet, the first two minutes is pretty much all basic blender fundamentals.

[@jno8039]

@@Pixationforlife Nothing to do with sim. It's about geometry node and uv.

[@Xgil2Play]

​​@@Pixationforlife Everything is for beginners when the teacher explains "why".

[@CraftedModulation2]

THIS IS WHAT I HAVE KZbin FOR!!!!!!!!! SUBSCRIBED!!!

[@hoodboyslim]

Trust me, this will help you! If it does not work for you ...check the order of the modifiers.... the cloth modifier should come after the geo nodes modifier!

[@eduardoai5]

I´m just sad that I only find this channel now. AMAZING content man! Greetings from Brazil

[@cleverpoly]

cheers!

[@joshoxy]

the lighting technique to create fake shadows is insane!!

[@cleverpoly]

thank you!

[@buluidong]

Can’t wait to try this out

[@a.k.chanel4316]

one of the best tutorialas 👏👏 thank you

[@man_art_man]

very nice and clear explained as usual! Now i have created this again ))) Thanks for sharing it with us

[@williamlacrosse9389]

This is absolutely fabulous!

[@cleverpoly]

thanks William

[@mehmetonurlu]

i like the fabric effect u did with voronoi, nice

[@Zhiznestatistiks]

In 4.0 + versions of blender you can't use normal coordinates of a light for texture mapping, because when you increase the spot light radius the normal blurs. Better use UV coordinates.

[@cleverpoly]

You can use the Node GEOMETRY and get the incoming vector from that which should solve this problem of light not blurring out.

[@Zhiznestatistiks]

@polyhmm. Geometry > normal aren't working for me in 4.0.2. Thought I tested all the geometry coordinate nodes outputs and the only ones that doesn't get blurred and have have the same data as "Normal" is Geometry > "Incoming".

[@qubitx64]

Nice one just what i needed

[@muhamadbagus9327]

Can i suggest can u add keyboard overlay that you press? I really confused sometimes. Add keyboard overlay what you pressed, please.

[@cleverpoly]

in that case you can use Google 😉 but still if you did the donut series you won't need keys up there

[@ValRossa-g6o]

Thank you for this, amazing tutorial. I followed all the steps but for some reason, my results was ,the fabric looks broken when inflated, cheap quality, and different from your outcome, I tried create baking again and same result, wish i could add a screenshot. Any idea why?

[@paulalthaus9951]

Try to turn off self collision ;)

[@Nic-tg2ei]

This is pretty great! thank you.

[@YvesBonheur]

Amazing，easy to understand and follow😍

[@cleverpoly]

damn right 😎

[@Patrick-h9q1v]

Thanks for the tutorial. I wonder if anyone else is having this issue. When I adjust the radius of the spotlight, the pattern doesn't become softer: It completely disappears.

[@cleverpoly]

I got you, so I saw the comment and researched for a good while haha, use this setup imgur.com/a/LSActcy

[@Patrick-h9q1v]

@@cleverpoly Awesome! That worked. Thank you very much!

[@giovannimontagnana6262]

Your stuff are gold

[@cleverpoly]

thank you 😇

[@stahldesignl]

Thank you very much! Is it possible to animate the air bubbles, so that it looks more realistic?

[@BONO44-f6s]

hey when i use the boolean math node my image get full black :\ How Can i solve this issue. instead i used a color ramp and flipped it but i still want to know why boolean doesn't work.

[@franexma6]

Hi. Have the same problem :/ Did you solve this issue?

[@MrBodyaga99]

As I understood your picture should be strick white and black. you can use online convertor to make your pictrure white and black

[@MrBodyaga99]

@@franexma6 check my reply below

[@BONO44-f6s]

@@franexma6 use a color ramp

[@azamataubakirov6790]

Awesome! Thanks for sharing

[@novapulsed]

Bro, why don't u just create a PLANE at the beginning ??? WTF???

[@MD-gamercoding]

no kidding i waste my time doing the plate when i club just added it -_- bbut everyting else was good

[@mni12]

Yeah lol, as a note I think that's why his first bake is "inverted" and he needs to set the pressure to -25, it's because the plane he is using has the "outside" on the bottom, while a normal plane will have the face orientation upwards.

[@novapulsed]

@@mni12 I stop watching after this so Idk man but maybe youre right

[@Teh_Yeet]

crazy good

[@jostv.2726]

Great video! Unfortunately I cannot select "pin" in the "Store named attribute"-node. It does not appear in the dropdown menu. I only see "sharp_face", "position" and "UVMap". Does someone know why I can´t select pin in the node? I am currently using Blender 4.0.

[@anishsingh9865]

Hi there have a question in that uv part u shifted that black point to white for black border how to do that please reply

[@rajatsubhra95]

After I applied not boolean math node, the whole image became black and nothing is working afterwords.

[@andraditedn]

I have same problem also

[@rajatsubhra95]

@cleverpoly any solution?

[@bozzax]

I had the same issue and solved it by adding add node just before the boolean node

[@bozzax]

for the add value : - 0.1 worked for me

[@azamataubakirov6790]

You saved my workflow Thanks a lot!

[@simeongeorgiev531]

great tutorial! it will be even better, if you show how to make the logo pop animated gradually ( i think you have used proximity for the previous tutorial)

[@cleverpoly]

did it for the old tutorial on my channel

[@colebanton7126]

Great tutorial! Did every step however when I baked, nothing happened and nothing inflated. How do I fix this?

[@cleverpoly]

don't just do every step, make sure that step worked. for example the alpha map the attributes everything

[@ryananderson2859]

Great tutorial. Everything worked for me but I do have a question. When I increase the subdivision level from "one" to "two" within the geometry node then bake, my cloth looks crumbly. Subdivision one works but increasing the geo node subdivision any further produces less than satisfactory results. Any idea on how to keep the fidelity but increase geo to make for a smoother cloth sim ? Thank you in advance

[@cleverpoly]

one way to solve is if you add more subdivisions then scale up the objects all of them basically it's unable to calculate more geometry in same scale so needs more scale

[@hundegemechu855]

Instant subcribe!

[@tomiwadaniel4665]

Hi clever poly..Great tutorial… followed every step.. but after clicking ctrl+shift on the image texture and group input, the logo doesn’t show on my plane. What do I do

[@cleverpoly]

node wrangler addon enable it

[@tomiwadaniel4665]

Thank you very much mr clever poly … it worked perfectly 😭.. been on this tutorial for 2 days .. how does one connect with you, I’m a fan

[@cleverpoly]

@@tomiwadaniel4665 Instagram discord haha

[@conker19901]

Hey @cleverpoly! Nice vid. I'm playing with this project you've shared and I'm wondering if it's possible to change the color of the inflated part ?

[@homieknowme223]

really nice tutorial. one question tho. Mine does not inflate even though I have pressure setting on and a value. Tried both positive and negative. Can you help?

[@ramiparma4962]

Hola, me pasa igual. Lo solucionaste?

[@hoodboyslim]

@@ramiparma4962 @homieknowme223 If it doesnt work for you ...check the order of the modifiers.... the cloth modifier should come after the geo nodes modifier!

[@sjkshehejaosksidj3728]

thank u for the tutorial, but i want to asked about something. I'm not a begginer in blender. I already followed all of the step by step of ur tutorial without changing anything except for the image and plane sized. But when i started baking the cloth simulation, when the bake finished, the plane is started to crinkled and messy. What should i do to fixed that? i really hope u answered this, because i'm using this for my work. Thank u

[@cleverpoly]

scale up your plane and check.. like 5x bigger

[@sjkshehejaosksidj3728]

thanks, it works@@cleverpoly

[@pavelmarek01]

Hi, great tutorial! I have 1 problem with change the color of my logo...when I use slider on color ramp, it change color of "fabric", but the logo stays black....do you know, where is the problem? Thanks a lot!

[@cleverpoly]

maybe you are changing the wrong handle

[@lospuntosstudios5149]

i tried to use an animated Letter instead of using an image to push this animation to it´s limits. The image texture node in geometry nodes has a Frame value that i´ve keyframed but when i bake it only the first frames are showing the pinned letter but then it goes wild an just flying away without any pinned stuff. Do you think there´s a away to achieve this?

[@cleverpoly]

depends on the type of the animation you put on

[@cleverpoly]

it might work it might not work

[@lospuntosstudios5149]

@@cleverpoly i made a quick black and white eevee animation as mp4 with the letter "B" rotating on the z axis and a frame. No matter if i invert the colors or not. there is something not working. In the animation i can see the letter starts to rotate but just the irst frames. The graph editor shows a stepped curve that i cant change to real linear but thats maye a geometry nodes thing.

[@cleverpoly]

it should work I dunno why it's not working for you, did you confirm your final black and whie output and what geometry you are pinning and everything, make you think about it and do every thing right it's kinda complicated

[@lospuntosstudios5149]

@@cleverpoly drive.google.com/file/d/1vj1HQe8yb1rhUDB0x_FbhgQFR3IsfDJ0/view?usp=sharing

[@yuraoleunik4325]

What you do on 7:37 ? After that it's look more smoother

[@JB-fc1ju]

After I baked it and pressed play my cloth just fell down it didn't sick to the logo. Any help?

[@cleverpoly]

your pin group didn't work

[@nenikamou]

I am not a beginner in Blender, I have a strong computer, I have the 3.6 version and did each step exactly like it shows in the tutorial (twice) and it is not working! I am so confused! Any ideas why anyone? Thank you!!

[@cleverpoly]

be more specific about the error

[@nenikamou]

Thank you for the reply. I followed all the steps 100% precisely and after my bake nothing happened when I pressed play. No movement whatsoever. I tried 3 times following exactly your steps one by one. Any idea what it could be? @@cleverpoly

[@cleverpoly]

@nenikamou dm me your file on discord and I'll tell you what's wrong

[@nenikamou]

Will do, thank you!@@cleverpoly

[@AlfieWalsh33]

Did u find the solution to your problem, cause I’m having the same issue! :)

[@JustThyce]

TYSM for this awesome tutorial. By the way what should I change if I want to use the same animation but with a different logo? I've tried changing the image file but no luck so I reckon I am missing a few more steps...

[@tomiwadaniel4665]

I’m having this same issue.. any luck?

[@JustThyce]

@@tomiwadaniel4665 I've had to start a new one.

[@tomiwadaniel4665]

Anyway I could connect with you? .. I’ve tried it like 5 different times with a different logo, my cloth just falls off.. but when I do the adidas and bake, it works.. now I’m sweating in front of my laptop cause I know it’s possible

[@JustThyce]

@@tomiwadaniel4665 I've had a similar issue to what u described and found the solution by paying very close attention to the part between min 3:00 - 5:30. That part where cleverpoly selects the edges in edit mode and scales down the selection to 0 afterwards, that solved for me bc I kinda zoned out and didn't follow step-by-step as what he did. Try focusing and following every single action he's doing there and you might get it fixed. hope it helps.

[@JustThyce]

I also made sure that that same small pixel selection is on top of a black zone of the logo. I only used B&W ones so far, this is something u might want to check and not use colorful logos, only dual-tone.

[@alitaghizadeh5055]

how do I uv this map on box or shoes? I mean how do 3d uv control on geo nodes ?

[@4uuuu]

so cool

[@cleverpoly]

❤🎉

[@kuaishuo]

How do I make the animation slower? Like the beginning of the video? Pls Help!

[@cleverpoly]

export it as alembic and re import, then you can time everything however you want

[@luckybeggar321]

why are my black areas inflated but not the white :D did i mess up the pin group ?

[@cleverpoly]

invert the alpha

[@endrebaklund7497]

Is it possible to animate the masks so the inflated and flat areas change over time?

[@cleverpoly]

yes

[@Salmonce]

nice

[@小笼包-m3o]

Holy, s.ht. didn't know it was even possible in Blender

[@elnaggaradver6044]

I tried this as much as possible

[@dogzrgood]

1:30 how are you doing subdivision. mine does not work :( To be clear, you're doing subdivision on a cube's face

[@muhamadbagus9327]

And how press I and the S in the same time, why my blender cant do that

[@cleverpoly]

not in the same time dude, please watch some beginner tutorials before following this

[@cleverpoly]

I think it was e and s for extruding and scaling

[@aku9790]

help I cant find the use nodes option in the light :'(

[@cleverpoly]

click use nodes and it only works on cycles

[@antares_fm]

tried google to find 'store named attribute" in geometry nodes, any help in locating that node?

[@cleverpoly]

don't google it, it's right there in geometry nodes. just click search and it comes up

[@antares_fm]

@@cleverpoly won’t come up in my list, maybe I need to update?

[@antares_fm]

ahh

[@crazyfox1377]

Instead of baking again after changing the pressure to minus, you can turn the camers up and move down. Because face fliped. 😂

[@cleverpoly]

the logo will be flipped you dumb@ss

[@crazyfox1377]

@@cleverpoly You are right. I just take a symmetrical image!🤣

[@ludwigjimenez4235]

3:17 how did you do that?

[@almonteadrian]

Every single time I bake, my blender crashes and I don't know why - any advice?

[@cleverpoly]

the simulation is wrong maybe the presure is too much

[@rednels]

u cant use default cube cuh

[@ДенисМаличенко-ю3е]

ничего не получилось, ткань куда то улетает и вместо надписи просто сморщенное поле

[@cleverpoly]

scale it up .. and make sure the pin group is working so test it with solidify modifier or something

[@hoodboyslim]

Trust me, this will help you! If it does not work for you ...check the order of the modifiers.... the cloth modifier should come after the geo nodes modifier!

[@ahmedkhalil1396]

hi nice but i did it it give me broken cubs not bumby cloth

[@ahmedkhalil1396]

fixed that by scale the size down

[@sjkshehejaosksidj3728]

@@ahmedkhalil1396 what things that u scale it? i have the same problem as yours too.

[@ahmedkhalil1396]

scale the object size @@sjkshehejaosksidj3728

[@ahmedkhalil1396]

then apply scale to it ctrl+A

[@khan_pro]

woow

[@peaolo]

First part overcomplicate: you could way more easily add the outer border in any image manipulation software (Gimp, Krita, Photoshop, ..) and next, have you ever heard about "images as plane" included add-on? Or just adding a textured plane? The way you suggested results in flipped normals, which leads to issues. And lastly, instead of repeating Shift+R to increase subdivs, there's a useful box in the bottom-left corner, where you can set the amount of subdivisions by typing the desired value (handy for those with slow PCs and it avoids flooding your Undo chronology). Title a bit misleading, maybe it's my fault but I thought you were going to reproduce a cloth simulation into geometry nodes!

[@cleverpoly]

Thanks for the feedback, I do tutorials for fun and do it the way they are fun for ME. there are always better ways to do certain things in blender. Making my tutorials fit for everyone is not my goal, my goal is always to introduce more Possibilities and do experiments that fit into my niche.

[@peaolo]

@@cleverpoly I read back my comment and it sounded a bit rude, sorry for this and I understand your point. Cheers.

[@rek001]

I cant see the texture on the plane

[@cleverpoly]

try to pin point the exact issue and you will find a solution

[@DaneBadenhorst]

I dont think this works on V4.0

[@cleverpoly]

you have to make it work for yourself, there's no simple answer to these issues it's like coding

[@jateshsingh3934]

Facing issue in logo is not look sharp nd clear lookk more vectorize

[@cleverpoly]

add more subdivisions

[@Simonoonn]

没成功，试了很多次，烘培也很慢

[@cleverpoly]

scale up all your elements by 5x

[@boneman_]

This is way easier to do in marvelous designer

[@cleverpoly]

then why are u watching bruh

[@boneman_]

Sometimes people have difficulty with cloth sims in blende or their pc isn’t powerful enough. Just offering an alternative. You should look into it as well if you have some time!

[@dcubvisuals]

explicas demasiado rapido jajajjaja

[@TenzDelek]

bro imported a cube just to make it a plane🙃

[@cleverpoly]

and you guys followed the step thinking it was important 😂

[@TenzDelek]

@@cleverpoly haha

[@Limbo_Design]

[@Emil-uw4pk]

not very beginner friendly

[@kevin-j1l4b]

please who are you teaching. is it the pros who know how to use the blender or you are teaching those who dont even know the command you are using. Please next time caption the commands you are using. it will really help beginners.

[@Frank-lk9fs]

you're going too fast, you don't have time to follow your steps

[@cleverpoly]

I got the result tho, btw I have a previous tutorial about this and that's why I did it faster

[@小笼包-m3o]

Pause? Slow down the video?