Nokia SR-OS: 2 - Configuring Physical Ports and Logical Router Interfaces

/* CONTACT
LinkedIn: linkedin.com/in/tucker0/
E-mail: [e-mail]
* /
Presentation: 1drv.ms/p/s!Ap...
RFC 1180: A TCP/IP Tutorial - tools.ietf.org...

[@TorreyCrabtree]

I'm a Cisco guy who got a Nokia network dumped on me, these videos are a lifesaver.

[@apostoloskou]

Your demonstrations are wonderful! Not many available for Nokia SRs on the internet and yours are really the most helpful, at least for me! Greatly appreciated!

[@iqbaldotme]

I am totally new to Nokia SROS, your explanation and presentation are really easy to understand. thank you for making these videos!

[@thomastucker3764]

Thanks for watching, Iqbal! I'm glad you're enjoying the videos. I haven't had the time to create more at the moment, but I haven't forgotten about this channel. Please stay tuned!

[@tylerlindberg7881]

I just got a position as a Jr. Networking Engineer using Nokia gear, this stuff is exactly what I need right now. I'd love a start to finish initial config (Management info, SNMP config etc) with basic general network config stuff. :) Thank you!

[@besisikaphotography3061]

Thanks for doing this for us. It is really helpful. The lengthy videos are very much appreciated, they contain enough detail to go on. You are a life saver!

[@toniojz5048]

Hi Thomas, this is July 10, 2021. I enjoyed your presentation. You pace is good just pause a few seconds so the audience can listen and view what you just typed into the command line. Also, you mentioned backslash, but you meant to say forward slash "/" for entering commands in any contexts. Overall, your presentation is excellent and on point for the first two presentations on HW and Cards, and Port and Logical Interfaces. Plus, I also appreciated how you compared the functions and commands to Cisco and Juniper. Thank you for sharing and teaching. Keep up the good work.

[@vetri10]

Awesome stuff Thomas very less people does the Alcatel devices kudos & thanks a lot

[@thomastucker3764]

You're quite welcome!

[@miovieira]

Dear Thomas, these videos are fantastic and it helps me so much! Thank you!

[@thomastucker3764]

Hey Milton, thanks! I'm glad you're finding them useful.

[@LuxelineLondon]

Awesome video and just the right level of detail. Thanks a million mate

[@thomastucker3764]

My pleasure, Kafeel - thanks for the feedback and thanks for watching!

[@nathneal5703]

Many thanks Thomas for this video.

[@thomastucker3764]

My pleasure!

[@baharehshahpar8674]

Great explanation , hope you make more videos. I just start with SROS and this video was lifesaving for me. Thank you and please make more videos you are really good at it

[@ChunkyMonkaayyy]

"I call them 'next generation' but they're kinda old now"... Funny how that works. :)

[@bartman0023]

Thanks a Lot for your time for doing this kind of videos !!!

[@thomastucker3764]

Any time, Miguel - thanks for checking out the videos.

[@drogot09]

Very helpful video, best of its kind on youtube, thanks sir.

[@Amos-jm1zb]

Thank you Thomas!

[@lucasfontini5881]

Congrats, keep making this videos ✌✌✌✌

[@andrewjames3908]

Excellent thank you. Could you do some videos on Ethernet switching using the 7450 Service Switch please.

[@amitpatil106]

hello Thomas, is there any way to save router config via GNS3? Every time when I open my project, we need to config from card and mda. i gets hectic when router numbers increases.

[@thomastucker3764]

hey amitpatil, GNS3 should be saving those configurations automatically. are you still experiencing the issue? if so, let me know and I'll check my GNS3 client settings. I'm guessing a hard disk isn't configured properly for the QEMU image, or your GNS3 client may not have write access.

[@amitpatil106]

Thank you for your response. I am using EVE NG now it's working perfectly fine. Your videos were much helpful.

[@faisalak7]

Very helpful , thanks for your time and effort

[@reion78]

Hi Thomas, hi all. Can you please suggest me where I can find the TIMEOS images to add to EVE or GNS? Thank you!

[@MrMilanina]

Great video. One question, please. Why are your logical IFs using /28, is there a reason for it to be /28?

[@winnersuccess]

Thanks Thomas, I have one query. Is logical interface to Physical port binding one to one mapping? Can we configure multiple logical interfaces on same physical port?

[@thomastucker3764]

Good morning, Sharad - excellent question! The logical router interfaces and physical ports are bound in a 'one-to-one' fashion. So we cannot associate one physical port with more than one logical router interface; nor can we associate one logical router interface with more than one physical port. Thanks for watching!

[@toniojz5048]

Thomas is July 10, 2021. I agree with the physical port to logical IP interface one-to-one mapping. However, there is a way to map one logical interface to multiple physical ports by using Services such as: IES or VPRN services for IP routing interfaces. For example, SAP id's can distinguish traffic on a single port with 802.1Q VLAN tags and those SAP id's will be specified within another switch service called VPLS. Use the Auto binding command and this results in a Routed VPLS (rvpls) service with multiple physical ports associated. Lastly, bind the rvpls to the IES interface or VPRN interface, for example, and now, multiple switch ports comprised from the router physical ports with VLAN encapsulation can be associated or mapped to a logical router interface. This is a way the questioner might want to consider as a method to achieve the idea that he inquired about, which is mapping physical ports to a logical interface. SROS allows mapping one port or one switch made from several ports to a logical interface.

[@JavedEnginer]

Nice, Many thanks.

[@thomastucker3764]

You're quite welcome, thanks for watching!

[@nagendramadhavachar3868]

Hello Thomas, please make video on RSVP TE

[@heywhy100]

Hi Thomas, this is really helpful I must say, many thanks for doing this, I need the Timos though, will send you a direct email.

[@thomastucker3764]

Hi Heywhy, you my latest video includes a link to the SROS image I'm using.

[@Oscarin7611]

Hi Thomas Thumbs UP, this is really very informative and usefull, I do Have GNS3 but, I dont have the 7750 SR OS to practice with do you know how can I get it? I would love to have it.

[@thomastucker3764]

Hi Moka, please message me on LinkedIn or Facebook.

[@corneliusagbogun2553]

@@thomastucker3764 Please share your LinkedIn handle.

[@Oscarin7611]

@@thomastucker3764 Hi Thomas Moka is my Nick name but, Oscar Hernandez is my actual name. and again I love your awesome videos and I would like to use timos sr os to be able to practice in real time with GNS3. I looked for your profile in facebook and LinkedIn and I couldn't find you. my E-mail is [e-mail] .

[@Oscarin7611]

thank you Thomas, works perfect!

[@peterhunte]

Much thanks

[@ajaycnt]

Hello Thomas, Thank you for your time and efforts to impart TiMOS basic configuration knowledge. Could you assist me to get the TiMOS image and setting it up in the GNS3 please?

[@thomastucker3764]

Hi Ajay, sure - I'll be glad to help. Send me a direct message, and we'll get started troubleshooting your TiMOS image in GNS3.

[@ajaycnt]

@@thomastucker3764 Hello Thomas, Thank you for your willingness to help. I don't have TiMOS image for GNS3. Please let me know how to get it.

[@thomastucker3764]

@@ajaycnt Sorry for the late response - send me a message on LinkedIn or Facebook, and I'll assist you with getting the TiMOS image.

[@Ak-pj9uw]

Hello , Thank you for sharing these videos , I am searching the internet to find the Images but with no luck , I want to practice the Lab on GNS , can someone please share the images, thx .

[@basavarajme3100]

Hi Thomas, this is really good for understanding NOKIA router. Thanks you so mach of this video and Please give to advice of how i can get GNS TiMOS

[@d2satish]

How to get image. I have pnetlab I want import the nokia image to pnetlab. Please assist me.

[@1beertastegood]

Do you cover how to get Nokia devices into the gns3 app?

[@thomastucker3764]

Hey 1beer, I just uploaded a video covering that. Thanks for watching!

[@alainoliveira1273]

Your setup classes at NOKIA SR-OS helped me a lot. Thank you for sharing your knowledge. Success. If you can, accept my invitation on linkedin