We just got done with very nice Hemi ! Great power, can’t wait to see what it does in the car! @ProChargerSuperchargers @NoonanRaceEngineering
Пікірлер: 147
@rob1832 жыл бұрын
Beautiful Aussie Noonan work of art. So happy to see something of this quality coming from Noonan on your show. After a myriad of doorslammer and top alcohol records smashed with their gear this is great to see. Love to see you give praise also when you are so accomplished in your field.
@highpointsights10 ай бұрын
Agreed, gracious words add to your veracity which is already pretty well established
@theariesexperiment46422 жыл бұрын
Steve is simply a trail blazing genius.
@johnbehneman15462 жыл бұрын
I AGREE WITH YOU ON CNC CRAFTMANSHIP. PLEASE CONTINUE TO SHOW US HIGH-QUALITY PROJECTS!! THANKS FOR LETTING ME SHARE.
@young119842 жыл бұрын
I would be hard pressed to take that piece of art out of my living room to put in a car much less run a hood over it, attention to detail is awesome.
@jonovoudouris2 жыл бұрын
Great to see appreciation of other people's work. Good work Noonan and SM
@The_StreetSweeper2 жыл бұрын
Just ordered a Billet H20 4.8 Bore space Hemi a few months ago from Noonan. Can’t wait 😋🥳 540” with twin 102s
@brandonharze21332 жыл бұрын
DAMN
@danmyers9372 Жыл бұрын
I’m curious how you got 540 out of a 4.8 block? I thought they were bore limited to about 4.5 and stroke limited to about 4.15? That would equate to about 528 ci. Thanks. Your engine sounds like an awesome piece. What did you put it in?
@The_StreetSweeper Жыл бұрын
@@danmyers9372 The 4.8 H2o's can take up to a 4.500" stroke/4.500" bore (cant speak for the solid block 4.8 version, as I'm not sure if there's been a deviation of block architecture slightly from the waterjacketed version) Mine is a 4.500" Bore/4.250" Stroke combo. Steve also just built a 4.8 H2o setup on his channel a few weeks ago using 4.510"(B)/4.375"(S) My setup is going into a Regular Cab, Short bed (Stepside) S10 Xtreme truck lol
@willr623 Жыл бұрын
@@danmyers9372they have a tall deck version
@rolltide95476 ай бұрын
What class?
@njclsx425227 күн бұрын
Noonan =work of art
@leonthompson90742 жыл бұрын
Always good and understanding content. You knocked it out of the park. God bless you.
@charleshenshaw90992 жыл бұрын
This one reminds me of a NPK engine. That 165 lbs of oil pressure is really good.
@ProCharged377LX2 жыл бұрын
That motor probably cost more than all the house’s I ever bought! Beautiful piece of work! You do amazing work!
@rolltide95476 ай бұрын
With the blower, fuel system, and all the electronics. Probably brand new about $180-$200 k.
@vhkillah2 жыл бұрын
Hi Steve,love your content as always mate,here's me carrying on about our national treasure noonan engineering a little while ago,and you post this,love your diversity engine god!!!!
@toddenglert48152 жыл бұрын
Dude I enjoy the hell out of this channel....
@adriannewman13222 жыл бұрын
Same here
@califuturist28 күн бұрын
That was a great ramp up. 👍🏾👍🏾👍🏾👍🏾👍🏾
@adamtheninjasmith29852 жыл бұрын
Lol Steve I just realized you're not a racer or a race engine builder. You're a true hot rodder at heart! Listening to you going over the machining Noonan does tells it all 👍. And damn I can see why you want your stuff to reflect that. I've never gotten up close and personal to anything you do but I personally think it looks awesome through the videos. Seeing this I can see why you're so impressed though. Can't wait to see the "beautified" Steve Morris stuff!
@alainhernandez87672 жыл бұрын
That thing is pure art my goodness the machining on that monster is pure engain porn!!
@Happy_2_Wheels2 жыл бұрын
>Thanks again for teaching us a bit Steve!
@johnbehneman15462 жыл бұрын
GREAT VIDEO STEVE!!!! TOTALLY AWESOME BUILD!!!! I LOVE IT!!!! & THANKS FOR SHARING!!!! MUST WATCH!!!!
@bigmotor38452 жыл бұрын
Good Lord! Big power!!!
@genemounce83022 жыл бұрын
Sure wish I had 100k lay'n around for a SM built Noonan based procharged engine. lol COME ON Texas lotto !
@Jnichols772 жыл бұрын
That 4.9 hemi is something else
@stacy60142 жыл бұрын
Im pretty sure he said 4.900" bore space motor not 4.9 liters displacement.
@Jnichols772 жыл бұрын
@@stacy6014 Correct. The standard/NHRA LEGAL hemi is 4.8” bore-space.
@dallynsr2 жыл бұрын
Displacement was 555 at 4.25” stroke. 9.09L
@manuel391642 жыл бұрын
What a beautiful Motor
@jeffdarden4735 Жыл бұрын
Nice build, definitely a machined work of art
@tomconner50672 жыл бұрын
Machining meets artistry but for a purpose, aesthetics are a way to remove more material reduce weight add clearance and increase visibility for inspection and installation/removal.
@bradenmolloy74432 жыл бұрын
I like how you had to introduce yourself Steve but we have been enjoying your son as well but we hope your busy working 👍👍@Steve Morris
@IAMMAN3.42 жыл бұрын
I completely understand attention to detail that's what I live for I do tile work and every job I do I do the best I can all the time only thing is I don't get to charge more so I stay steady in the same spot put love seeing woi done with pride young kids don't have a clue about it
@leighleigh42542 жыл бұрын
I mean it in a nice way but Steve reminds me of the mad scientist when he starts with his numbers, a font of knowledge in that Steve Morris head. Regards from the UK
@davidleary823 Жыл бұрын
Amazing engine. And we all know what an all out Noonan can do so that’s l like the street version of that engine.
@danielsmith-ze3wy2 жыл бұрын
Good morning everyone hope everyone is having a blessed day
@rooster76582 жыл бұрын
Talk about a sweet combo...one day I will have one..
@floydwilliams33212 жыл бұрын
Absolutely amazing machine work now to mention one hell of a engine/you guys do trick Stuff I’ve been following you guys for quite a while pretty amazing set up
@saulloyola11612 жыл бұрын
Masterpiece 💪
@TheBustedNut2 жыл бұрын
😳 AMAZING!!
@brentheilman89102 жыл бұрын
beautiful ❤ i love seeing excellent work by very talented people
@strykerentllc2 жыл бұрын
Those Noonan guys really LOVE their profile milling. Small tools and plenty of machine time but the end result is the tool marks are still evident so one has to ask, is the juice worth the squeeze? For something you'd hold in your hand inches away from eyeballs? Absolutely, since the customer will do the same. For something that's under a hood covered with fuel rails, wires and other ancillary items? Not so much. Fitment and tolerances are more critical in our humble opinion.
@vehdynam2 жыл бұрын
Beautiful piece , eye candy for sure. Good numbers ; I am sure customer will be happy. Thanks Steve, another informative video.
@CARRIERGUY2 жыл бұрын
Sweet video! Engine is definitely art work!
@RustyWells22 жыл бұрын
The real question is when is Steve going to design a SMX Hemi engine that's all his? I know he would not have a problem selling them but he might have a problem keeping up with the orders lol.
@dalewesley16622 жыл бұрын
Sorry about that🎥
@dallynsr2 жыл бұрын
He’s stated previously is not a huge fan of hemi head stuff. Obviously he knows how to get it to work, but says they’re easy to break parts and not as ideal as the more BBC style SMX heads.
@geneticrex2 жыл бұрын
@@dallynsr Yeah.....the HEMI based engines are only "ideal" for making the most horsepower possible.
@nhra71102 жыл бұрын
What a work of art!!
@ANotSoHotRodGarage2 жыл бұрын
Would make a hell of a barstool engine. Fun ride once at least.
@joshuamoore24_72 жыл бұрын
I guess a jet boat would be a good candidate for that engine.
@h.w.h.6732 Жыл бұрын
Someone wants an NPK Car! Cool!
@jimmyboe252 жыл бұрын
Hell yeah
@studbolt56272 жыл бұрын
👍👍
@turboman351w32 жыл бұрын
ABSOLUTELY ISAINE
@rodstevenson8231 Жыл бұрын
LOVE THE NOONAN SME..
@deansciortino64252 жыл бұрын
Time for your water block with those heads unbeatable combination be it race track street or anything you want to throw at it
@Ron_Masterjohn3 ай бұрын
Spinning the blower at 78k is unreal
@kempy5352 жыл бұрын
9k rpm. That is insane.
@shawnwalden26692 жыл бұрын
beautiful!
@geneticrex Жыл бұрын
I would think this combination would be fairly friendly to maintain at such a relatively low rpm for a HEMI. Even all iron 4.800 SS/AH engines with steel valves and 60 mm cams operate close to 10,000 rpm, so this should be easier on the wallet compared to the 10,500+ configurations.
@JohnRoberts712 жыл бұрын
Great content thanks for sharing
@Living_EDventures2 жыл бұрын
Looks great Steve!
@MrBlackbutang2 жыл бұрын
Tonto said : good trade !
@lukelikens20572 жыл бұрын
Motor is definitely a work of art and I was wondering if those motors have water jackets like your SMX or does he have a water jacketed motor in his line of motors
@Jnichols772 жыл бұрын
You can get the 4.8 hemi water jacketed. That is the combo the shit box of doom ran on drag week before Tom Bailey rebuilt it.
@vintagetractorsaustralia2 жыл бұрын
Yes. Water jacketed. Dominator from street outlaws runs one.
@davidmichael22092 жыл бұрын
Holy Toledo
@rueridge75972 жыл бұрын
How original 🤮
@douglasschaefer3750 Жыл бұрын
Right there girl stause
@joshuamoore24_72 жыл бұрын
You will need a car or truck with an incredibly long front end engine bay area.
@shane495204 ай бұрын
whats the purpose of the 2 blow off valves? does it have that much charge pressure that when u the throttle plate is closed it needs 2? interesting
@gogetem188 Жыл бұрын
HI ALL Love the way you appreciate good quality metal work noonan use Hass ? just wondering noonan is from AUSTRALIA now florida i seen to remember something in Aus we used to do a lot of engine building barra was built 10 km from me and went to school next to chrysler's in adelaide and now we don't even build a car nothing the truth is $$$ say no more thx steve
@ss-55532 жыл бұрын
Wow !
@jeepwk6.5L2 жыл бұрын
Jeez wish this was what my gen 3 made lol
@jmag60962 жыл бұрын
Bad ass
@lindsaymcpherson47442 жыл бұрын
Great video very informative ,could you do a video on the most cost effective way to make 2000 HP ??
@dicknijenhuis98942 жыл бұрын
I agree on the detail aspect. You can shine up a turd but it's still a turd, even if it's making 3000 hp.
@calvin999912 жыл бұрын
So when he blows your doors off with that 3000hp, it doesn't count if his engine doesn't look good? Brilliant mindset.
@FadetoBlack1463 Жыл бұрын
Noonan a turd? lol to funny...
@rolltide95476 ай бұрын
Radial vs the world type engine.
@petervossos4816Ай бұрын
WOW… can I put that in a street car and run a manual gear box behind it ? 🙂
@canoelicker2 жыл бұрын
Wow.
@bobmoore47902 жыл бұрын
The smx will do this much power also right?
@robertwetherington33722 жыл бұрын
Yea but this 1 is detuned
@dallynsr2 жыл бұрын
SMX more. (his one previous video stating BBC style valvetrain is better for big power)
@IAMMAN3.42 жыл бұрын
I would love to put that in my Laramie turn it into all wheel drive beast sleeper that would be so sick
@michaelw3809 Жыл бұрын
I've heard the Street Outlaw guys always talk about 5,000 horsepower from a Hemi is that BS or what explains the difference?
@FiglioBastardo2 жыл бұрын
Phheeeewwwww! #SofaKingDope! #SofaKingBeautiful!
@victormackenzie-davis27112 жыл бұрын
“HORSEPOWER” confused I always thought the Hemi design was more efficient in a blow application, after looking at these numbers your platform has put out more horsepower so what is the advantage of the Noonan?
@jasonstormoen2 жыл бұрын
There is a video where he talks about valve train in the hemi, smx, and bbc comparing them.
@ray89162 жыл бұрын
3700 horsepower is nothing to sneeze at
@adamclark22452 жыл бұрын
So I seen that Axeman has switched to this setup IDK what size procharger he is using. I assume he is getting a weight break going with the smallblock so my question is can you tell us if this is Axeman's new motor that you built?
@doorman73162 жыл бұрын
😍 Engine Pornography!
@mikevaca47752 жыл бұрын
Hi….Does anyone know 100% for-sure what coating is on those dyno headers? Do they just have a standard issue white ceramic coat (Cerakote) or is it something different that offers better heat retention or transfer? Thank you!
@FiveFourRacing2 жыл бұрын
can I suggest reaching out to motorsports tech and have them make you hub centric wheel centric adapters I've had my 5x5.5 lug to 8 lug spacers for 3 years with 37's filled with water and the spacers have never failed I've had cheap parts store studs fail but those spacers are mint
@califuturist28 күн бұрын
So red line is 8600 rpm ?
@bobmcalister21312 жыл бұрын
Need to sale the trade in to Cletus!!! Lol Great videos!!!
@rueridge75972 жыл бұрын
Cletus???🤣🤣🤣 Frat boys not ready for real racing. Still in learning curve.
@gnarkiller2 жыл бұрын
@@rueridge7597 post your car if you're going to talk shit.
@bobmcalister21312 жыл бұрын
@@rueridge7597 true that!!
@JayRussellDuramax2 жыл бұрын
@@rueridge7597 Did you watch the video where he ran Sick Seconds 1.0 down the track? The dude didn't have parachutes and still kept the car out of the sand on his first ever run. I'm not a fan of everything Cleetus does, but the guy knows how to drive. I don't think he'd have any trouble handling this amount of power.
@vehdynam2 жыл бұрын
@@JayRussellDuramax I agree , very talented driver , natural ability.
@ronyoung60542 жыл бұрын
The MIGHTY CHRYSLER HEMI, been making chevies go fast for year's
@CoyoteFTW2 жыл бұрын
What? It’s nothing to do with Chrysler or Chevy
@ronyoung60542 жыл бұрын
@@CoyoteFTW that engine is a MIGHTY CHRYSLER HEMI ask anyone that has a clue about engines. If you don't know
@tlr-nut7275 Жыл бұрын
@@ronyoung6054 I believe this is more Ford Boss429 based.
@TheThemattyo1 Жыл бұрын
Under driven to mellow it out" good deal.
@Deuce15502 жыл бұрын
How come top front header bolts are missing on both sides?
@JaneShrek2 жыл бұрын
Need to send that over to Cleetus McFarland for Mullet
@Make-Asylums-Great-Again2 жыл бұрын
Derp derp cleetus derp
@ronsmith7739 Жыл бұрын
I just wish Chrysler / Dodge / Stellantis would make a production car with Gen 4 Hemi with 4.9 cylinder spacing, deck height of 265 mm or 10.433, 36 degree combustion chamber, 4.600 bore, 4.600 Hemi head , raised camshaft 70mm diameter, raised about 1.5 inches and last but not least a 45 degree ball nose head. This would be wild. Oh, and "F" Gov. Gavin Newsom.
@clayboist2 жыл бұрын
Have you started building the engine for ole Cleetus McFarland yet??? The elco need that big block powerrrr
@oliverrobey69732 жыл бұрын
I would pay it too if I had it 3500 16 horsepower
@user-of6kr8jm3l2 жыл бұрын
What fuel is this running on
@dallynsr2 жыл бұрын
Ethanol or VP
@anthonyjones6572 жыл бұрын
How do I get ahold of you?
@approachingtarget.45032 жыл бұрын
What's bigger? The crank or the blower....geesh.
@highpointsights10 ай бұрын
Why are you hesitant to do"hemis"?
@spencerreinstein7352 Жыл бұрын
I cant believe its putting down 3600hp not pushing it😳, I would love to see comparison between this 4X against PSI-C Blower, bcz it seems as tho the 4X maks more power🎸
@beachboardfan95442 жыл бұрын
Whats going on below 4k rpm?
@daverr81632 жыл бұрын
Irrelevant to a race engine.
@beachboardfan95442 жыл бұрын
@@daverr8163 Yes, but that doesnt answer the question...
@daverr81632 жыл бұрын
@@beachboardfan9544 dyno testing an engine at a lower rpm could be risky due to more time in the cylinders for detonation to happen.
@beachboardfan95442 жыл бұрын
@@daverr8163 Doesnt the dyno capture data through all rpms? Does the engine not go from idle to at least 4k rpm on the dyno?
@willitnitro85062 жыл бұрын
@@beachboardfan9544 The rpm is held constant by the dyno at the beginning of the pull. And depending where he has it set, will determine the beginning of the pull. As long as he sees the peak torque number, he can use math to figure out the rest if needed. No need to pull her down lower than it will ever operate.
@petersouthernboy6327 Жыл бұрын
I click on all things HEMI
@dalewesley16622 жыл бұрын
😀🇺🇸🏁 course 😀😀😀😀😀
@teknoaija17622 жыл бұрын
no need for" in my opinion" when discussing physics.the effiency of a blower isn t a matter of opinion.only religious people adjust their opinion angle when trying to optimize the suspension in their vehicles.noonan is quickly becoming synonymous as high quality machining and design vendor surpassing likes of BAE and DART.Brodix is still holding their own with continued design effort in large ass engine blocks going for 5.3 bore space stuff,even 5.5 inchers allowing 1200 cid displacements.if i had a budget i d ask steve build me a 900+hemi with sonny leonard 600+cfm flow heads and 16-71 top of the line roots blower.i love that video where clituris mcfarland rips a 6.53 in bailey`s street car with sm power.fucking impressive!
@manuel391642 жыл бұрын
What Cost this bad boy 100k$
@stefandwoodham2 жыл бұрын
@5:24 DOO DOO
@bikewurks1757 Жыл бұрын
Steve if you and murder nova could get together.....your the ingredient his race program is Missing